Search results: valve

Sort order

2,297 models

Cyclo valve cover

Cyclo valve cover for 6 and 8 mm valves I recommend putting a collar around the valves so that they hold well on the printing plate

Downloads
3,097
Likes
805
Rating
4.94
P
PrintablesArrow_Raider

Schrader Valve Cap

I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…

Downloads
1,642
Likes
245
Rating
4.91
P
Printablespressi

Cyclone Vacuum Dust Separator with Built-in Pressure Relief Valve

Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…

Downloads
1,447
Likes
312
Rating
5
P
Printablessh

✊ Fist - Bike valve cap

Info: another hand model for valve cap Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…

Downloads
962
Likes
128
Rating
5
P
Printablescryptkicker

Croc valve stem cap

Decorative Croc valve stem cover. Includes both schrader and presta valve cap styles. After several test prints, found it came out best printing on it's side with some supports. Also remixed from the following:…

Downloads
891
Likes
180
Rating
4.33
P
PrintablesNuvz

Chevrolet Bow Tie Tire Valve Stem Cap Chevy

This is a simple valve stem cap I made for my Chevy. Great idea for a gift or just to doll up your ride. You may need to print it with a brim! The pre-sliced file is for 5 caps. Color break is at 14.3.

Downloads
798
Likes
97
Rating
5
P
PrintablesmoWerk

Tire Position Valve Caps | Wheel Location Marker Caps

Preparing for tire swap season, these marked tire caps shall help by permanently marking the tire position. Print using PETG , TPU or similar weathering resistant material Print the first 3 layers very slowly to have precise letters…

Downloads
614
Likes
164
Rating
5
P
PrintablesPeter Farell

Marge and Homer Valve Stem Cap : Bike Cap

Marge and Homer Valve Stem Cap : Bike Cap Fits Schrader Valve Stems.

Downloads
567
Likes
167
Rating
5
P
PrintablesThesBer

Bicycle Spoke / Valve Propeller spin

🚴💨 Spin Your Ride – Bicycle Spoke / Valve Propeller Fun! 🌀 Why just ride when you can fly ? This 3D-printed propeller spoke/valve cover turns your bicycle into a mini aircraft (well… in spirit at least😉). As you ride, the propeller spins…

Downloads
565
Likes
307
Rating
5
P
PrintablesNuvz

Toyota tire valve stem cap

This is a tire valve cap with a Toyota logo I made to give as a gift. Super easy to print. Color change is at 14.3. You may need to print it with a brim. The pre-sliced file is for 5 caps.

Downloads
528
Likes
58
Rating
5
P
PrintablesKayuHD

Wasserhahn/ventil Knauf/Griff mit integrierter 7.7mm Rastbuchse / Faucet handle valve with integrated 7.7mm snap-in socket

Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…

Downloads
506
Likes
29
Rating
5
P
PrintablesPlatzhalter

Knob for Water cut-off valve made by Scheel -- Handrad für Scheel Eckventil

This comes in handy when the knob of your water cut off valve (German: Eckventil) from the company Scheel breaks and turns wild without closing or opening the valve. Fits a 4,7mm x 4,7mm rectangles on the valve that is ~13mm tall. To get…

Downloads
467
Likes
33
Rating
5
P

Skull Valve Cap for motorbike, car, bike and other

Skull Valve Cap for motorbike, car, bike and other

Downloads
449
Likes
43
Rating
0
P
Printablesjoiseystud

9mm Tire Valve Cap

This is a model of a 9mm parabellum with a thread added for a standard Schrader or Presta valve.

Downloads
448
Likes
64
Rating
4.5
P
PrintablesMartin

Bullet Valve Cap

Take a look at Shrek Valve Cap ! --------------------------------- Good looking valve cap for your bike made for Schrader type valve = most common --------------------------------------------- Print : 0.15mm NO Supports PLA, PETG, ABS…..

Downloads
443
Likes
114
Rating
5
P
Printablesafschuld

Schrader Valve Paddleboard Adapter

This adapter will allow you to connect your Schrader style bicycle or tire pump to your paddleboard for easy inflation. I am using it with a Milwaukee M18 Electric portable air pump to fill up my paddleboard on the go. I printed in PETG,…

Downloads
406
Likes
55
Rating
0
P
PrintablesLayerCake

IKEA Skadis Valve Index Holder with Charging Function

Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…

Downloads
397
Likes
98
Rating
5
P
PrintablesAlexey Papoi

Moai Presta valve cap

Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta

Downloads
385
Likes
44
Rating
5
P
Printablesecsv

Temset valve to M30x1.5 thermostat adapter

The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…

Downloads
382
Likes
9
Rating
0
P
PrintablesAlexey Papoi

Monkey presta valve cap

Just a remix of a hexagon presta valve cap and a money statue, fits perfectly and snug, doesn't move around. pretty strong threads

Downloads
319
Likes
49
Rating
5
P
Printableszosman

Presta Valve Core Removal Tool

A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…

Downloads
297
Likes
19
Rating
4.83
P

VALVE Index Knuckles and HTC VIVE Tracker 3.0 Charging Stands

These here are some simplistic Charging Bays for my Index Controllers and also my new VIVE 3.0 Trackers. I didn't like how all my VR Gear was just laying in my Drawer so i decided to get it all a bit more Cleaned up ^^ I Recommend using…

Downloads
246
Likes
25
Rating
5
P
PrintablesMartin

Shrek Valve Cap

Take a look at Bullet Valve Cap! Shrek Valve Cap made for Schrader type valve = most common Print : 0.15mm No Supports needed PLA, PETG, ABS…..

Downloads
242
Likes
76
Rating
5
P
PrintablesDHP

Bosch GTS 10 - 50 mm HT Ball Valve Blast Gate for Workshop

I like to have a ball valve on my Bosch GTS 10 saw to be able to fit the vacuum cleaner with HT pipes of 50mm diameter. I took the original design from here https://www.thingiverse.com/thing:4578649 and scaled it (files are added) to get…

Downloads
215
Likes
51
Rating
5
P
PrintablesNewksHub

Hive Smart Radiator Valve M30 (TRV) Adapter

This model was created to replace a missing standard M30 Hive TRV adapter. I printed in 0.15mm layer height in Prusament PETG. Snug Supports for overhang. Do not over tighten when fitting onto the radiator.

Downloads
172
Likes
10
Rating
5
P
PrintablesAMPDesignworks

Schrader Valve Dust Cap

I wanted some custom valve caps to protect my car tyre valves. I had used some metal ones before but they got welded to the valve so I wanted something plastic to prevent that but also hex headed so that if it did get stuck I could get a…

Downloads
134
Likes
14
Rating
5
P
Printablesbart

Scuba cylinder DIN valve screw cap

Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…

Downloads
132
Likes
7
Rating
4.5
P
PrintablesJonasovo

Radiator Valve Knob M28x1,5

Replacement radiator valve knob. Open design with 4,5 mm mark. Common in old Prague appartments. Added a slot for a coin to spread the stress. Previous version got punched through into the infill. Compatible with: 1 CZK coin 0,10 EUR coin…

Downloads
128
Likes
10
Rating
5
P
PrintablesJonasovo

Red Valve Extruder Visualizer for Anycubic Kobra Go / Ender 3

Remix of GLeZz's Red Valve Extruder Visualizer to fit bowden extruders on Anycubic Kobra Go / Ender 3. Downscaled. Print with supports, split the valve into two parts to save material, print the nut separately. Fits to stock extruder on…

Downloads
111
Likes
19
Rating
0
P
Printablescrudo

Air Valve Wrench 6 Teeth

Wrench (key) for air valve on paddle board or other inflatable things.

Downloads
107
Likes
7
Rating
4
P
PrintablesKbobabob

Valve Index Headset Wall Mount

Less than an hour to print and holds the headset securly using the existing strap.

Downloads
82
Likes
6
Rating
5
P
PrintablesYao Wei

Valve Index front cable guide

WARNING: Tilting could still cause strain close to the connector in front of the facial interface.

Downloads
75
Likes
6
Rating
4
P
Printablescbutters

Valve Index to Quest 3 Headstrap Adapter Set

You can use this to adapt a Valve Index Strap to the Quest 3. 2025-09-11 : I finally uploaded the Quest3 → Valve Index Gasket File with proper edits.

Downloads
74
Likes
6
Rating
0
P
PrintablesUnrea1

Valve Index Strain Relief

Strain Relief for the Valve Index connection brick. Designed to save your PCs GPU from damage while using the headset. The adapter is able to slide backwards out of the enclosure. Use M3 Screws and Nuts to screw together the enclosure.

Downloads
73
Likes
19
Rating
4

Resin infusion valve

Port to allow resin into vacuum infusion assemblies

Downloads
67
Likes
5
Rating
0
P
PrintablesXDleader555

Glove Box Air Valve Adapter for Volkswagen MKIV

v2 Update 6/18/2022 Angled the adapter 30° counterclockwise, added flange for the hose to butt up against, made the connector end bow out slightly to improve the seal between the hose and connector. ___ If you want to retrofit the glove…

Downloads
62
Likes
14
Rating
0
P
PrintablesNewksHub

Hive Smart Radiator Valve TRV Cover

Replacement Hive cover to change the colour instead of painting. This is non rotating so will not be able to adjust the valve manually from the valve itself. I decided to leave the button available if required and to try and keep the…

Downloads
53
Likes
4
Rating
0
P
Printablescsweichel

CamVac motor valve

When the Canvac doesn't use all motors, air pressure is lost through the unused ones. It will suck air through the motors that aren't running. Capturing Dust found this to be to the tune of 6-15% CFM. This valve fixes the problem by…

Downloads
42
Likes
6
Rating
5
P
Printablestom

Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model "Schrader valve cap with tool"

Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…

Downloads
41
Likes
2
Rating
0
P
PrintablesEyepokerouter

Mike Wazoski themed Bike Valve Cap (Schrader)

I created these for a Monster's Inc. fan's bicycle. Printed with 25% fill and 0.2mm layer height. To get the color changes, I sliced with layer changes at 3.2mm, 15mm, 18.2mm, and 19.4mm to get the color effect and give the eye its look.…

Downloads
38
Likes
9
Rating
0
P
PrintablesOndřej Kleger

Distinguishing tire valve caps

My print reccomended tips: 3 perimeters, 100 % infill ASA or PETG 0,1-0,15 mm layer height (important for the thread printing) fuzzy skin on outside walls (for the rougher cap surface) 0,4 mm nozzle use a brim no support needed For the…

Downloads
34
Likes
4
Rating
0
P
PrintablesSTSUL.CZ

MORA 218T stove valve / otočný kolík na ventil pro kamna MORA 218T

Jde o náhradní kolík na ventil pro kamna MORA 218T včetně krytky české výroby. Kolík ve formátu .3mf je dvoubarevný. It is a spare pin for the valve for the MORA 218T stove, including a cap made in the Czech Republic. spare pin is in .3mf…

Downloads
31
Likes
2
Rating
5
P
PrintablesKotelnik

Micromatic valve Protective cover

I created a protective cover for the CO2 control valve for my CO2 pressure bottle, which I use for tapping beer, which can be easily inserted and removed from the pressure gauge. They are nicely hidden to avoid damage. I printed from PLA…

Downloads
30
Likes
3
Rating
0
P
PrintablesCamRodandChief

Grohsafe / TIIEF valve to handle adaptor

I had to change the seals recently in by GROHE PRESSURE BALANCE VALVE CARTRIDGE TIIEF value. Unfortunately, when trying to remove the handle after loosening the setscrew, this handle was still stuck. I finally got it off, but this piece…

Downloads
24
Likes
3
Rating
0
P
PrintablesJedda

Profitec Pro300 handles for hot water steam valve - Profitec Pro300 Griffe für Heisswasser-Dampfventil

Handles for the hot water / and steam valve Profitec Pro300 with 6 mm valve axis The core (here made of orange Prusa ABS) should be printed from ABS or a similar material, as other materials become soft and deformed by the heat. I printed…

Downloads
23
Likes
1
Rating
0
P
PrintablesWillie Designs

Knob, Valve, Hose Quick Disconnect

Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…

Downloads
18
Likes
2
Rating
0
P
Printablesbuchnema

Waterbed Valve Plug & Cap Replacement

This is a replacement cap and plug for waterbed-style valves compatible with the design described in US Patent 268722. I created this model after losing one of the original plugs from a QUADRO Pool. The valve appears to be a common…

Downloads
17
Likes
1
Rating
0
P

angle valve handle / páka rohového ventilu

Náhradní páka rohového ventilu Replacement handle for angle valve

Downloads
15
Likes
1
Rating
0
P
Printablesdabork

Valve Index Lens Protectors for Eyeglasses by tanvach

Not made by me just noticed there wasn't an option for these on Printables yet and I have been using these for years now with no issues and my Index lenses have zero scratches because of them. Simply slide them over your lenses and they…

Downloads
13
Likes
2
Rating
0
P
PrintablesSmokeJaguar

Douk Audio U10 Mini Tube HeadAmp Valve Shield

The Douk Audio U10 Mini Tube Headphone Amplifier comes with a perspex shield which I don't like. So I made this instead which when printed in eSUN Copper PLA+ I think looks better.

Downloads
9
Likes
1
Rating
0
P
Printablesrichnormand

Jacuzzi diverter valve part

This is for an old Jacuzzi pool sand filter diverter valve model 24LT3 from the mid 1970s. I don't expect much downloads but I hope it helps someone save their functional filter for another decade since parts are no longer available. The…

Downloads
8
Likes
1
Rating
0
P
PrintablesChrigu

Shelly Add On for 24v Gardena Irrigation Valve

An add-on module designed to interface a Shelly 1 Gen3 with a 24V Gardena irrigation valve for smart control.

Downloads
8
Likes
1
Rating
0
P
PrintablesJµ§tïn

Valve de purge anti-retour - Piscine

Présentation du modèle : Cette valve anti-retour est conçue pour faciliter la vidange d’une piscine tout en empêchant le reflux d’eau dans le circuit. Vidange piscine, système de filtration et pompe à chaleur. Le système comprend trois…

Downloads
8
Likes
2
Rating
0
P
PrintablesJohn Lindstedt

Dust container Cleanmate S900 flow valve

Just print and attach it in the dust container. Be careful when removing it from the heatplate, the part is quite thin and can be pretty easy to bend out of shape.

Downloads
8
Likes
0
Rating
0
P
Printablespastaoceanfrog

Tire valve cap (Schrader)

Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…

Downloads
8,645
Likes
791
Rating
4.91
P
PrintablesDice

Threaded Tire Valve Cap

Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…

Downloads
7,719
Likes
2,271
Rating
4.94
P
PrintablesUniCube3D

V8 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…

Downloads
6,665
Likes
1,983
Rating
5
P
PrintablesPeterH1500

100mm / 4" Truncated & Full-Size Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…

Downloads
5,136
Likes
842
Rating
4.85
P
PrintablesTinkerer4000

Scalable Butterfly Valve

I needed some air duct valves to control ventilation for several printers. I made some of PeterH1500's ball valves which are really good, but they are too heavy duty for some of my uses. I needed a lightweight valve that was cheap to make…

Downloads
4,534
Likes
3,032
Rating
4.75
P
Printablesloicloic

Stand for Valve Steam Deck

TL;DR: Model B “Recommended” is the most aesthetically pleasing, Model C “Minimalist” is the smallest and fastest to print and will fit better in a pouch/case/bag. The purple one on the main picture is Model B, the light blue one is Model…

Downloads
4,465
Likes
348
Rating
4.96
P
PrintablesEcho116

Multiple Styles of Schrader Caps, Tire Valve Cap for Cars, Bikes, Carts, Etc.

From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…

Downloads
3,706
Likes
1,660
Rating
4.96
P
PrintablesPouOu

Presta Valve Cap

Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…

Downloads
2,914
Likes
276
Rating
4.93
P
Printables3DontheGO

Rubber Duck Valve Cover

Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…

Downloads
2,528
Likes
475
Rating
4.94
P
PrintablesExtrutim

Vacuum Bag Valve Spacer

A small but very useful helper for vacuum bags. This allows the air to be extracted much easier and faster. You can simply stick the part with some double-sided tape from the inside to the valve. Of course it works without tape but then…

Downloads
2,490
Likes
641
Rating
4.95
P
Printables3D Rejsen
18+

The source marked this model as adult content.

Downloads
2,450
Likes
1,229
Rating
4.93
P
PrintablesHondzik

Gardena valve adaptor

this part: https://1url.cz/FKSrA for this valve: https://1url.cz/EKSry only small O-ring needed

Downloads
2,370
Likes
352
Rating
4.88
P
PrintablesForgetter

Chevy Camaro LS3 V8 Engine - printable valves, lifters + N20 mini motor holder

Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…

Downloads
2,314
Likes
703
Rating
4
P
Printablessh

🤙 Aloha Shaka hand - Bike valve cap

Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…

Downloads
2,267
Likes
428
Rating
4.92
P
PrintablesSE

Car / bike valve cap (progressive thread)

Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…

Downloads
2,028
Likes
234
Rating
4.92
P
PrintablesUniCube3D

V6 Engine Model | Functional Pistons, Valves & Timing Chain

This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…

Downloads
2,006
Likes
655
Rating
4.67
P
PrintablesPeterH1500

100mm / 4" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…

Downloads
1,982
Likes
380
Rating
5
P
18+

The source marked this model as adult content.

Downloads
1,932
Likes
378
Rating
4.5
P
PrintablesPhilipp
Downloads
1,880
Likes
251
Rating
4.89
P
Printablessh

🤘 Rock&Roll horns hand - bike valve cap

Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…

Downloads
1,829
Likes
327
Rating
4.82
P
PrintablesPeterH1500

63mm / 2½" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…

Downloads
1,709
Likes
376
Rating
5
P
Printablesfirstgizmo

Garden Hose Valve

This ball valve can be used to reduce flow a little or shut it completely. It is fully printable and has a ¾" tread on both sides, so you can use it with a lot of other hose connectors you might already have at home. Printing: Print all…

Downloads
1,654
Likes
714
Rating
4.7
P
Printablesluma

Gas Cylinder Valve Indicator

Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…

Downloads
1,647
Likes
189
Rating
5
P
PrintablesSunShine

Print in Place Check-Valve!

Check out the video around this project!: https://youtu.be/1E3Ajqaapqk 0.4mm Nozzle 0.2mm Layer height

Downloads
1,601
Likes
154
Rating
4.7
P
Printables47

Easy to print valve stem cap

Super easy to print valve stem cap fits standard valve stem on all types of vehicles no supports If you like this model check out this one https://www.printables.com/model/1381047-valve-stem-cap-with-print-in-place-air-release

Downloads
1,594
Likes
816
Rating
5
P
PrintablesRNLDNKP

Radiator valve adapter M28 > M30 + Pin Extension

For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…

Downloads
1,525
Likes
49
Rating
5
P
PrintablesBuilt_Over_Bot

Duck Valve Stem Cap

Please note that our files are free for personal printing use. If you are commercially printing any of our files, you must be a club member.

Downloads
1,520
Likes
213
Rating
4.69
P
PrintablesTater Zoid

Poo Emoji Valve Cap Schrader

I can't find the original file I used to create this Valve Cap. It's an emoji, open source - right? Print Settings Printer: Qidi Tech x-One 2 Rafts: No Supports: Yes Resolution: .10 Infill: 15% Filament: Hatchbox PLA Gray Category: 3D…

Downloads
1,518
Likes
135
Rating
4.91
P
Printablesfirstgizmo

Aquarium fish tank Air Valve

Used for regulating airflow in a hose, like used for air stones in fish tanks. Printing: Print all parts in the given orientation. 0.2mm layerhight is recommended. Use: Feed the hose through the valve and tighten it for regulating the…

Downloads
1,434
Likes
291
Rating
4.92
P
PrintablesMarkoJ

Simple Water Ball Valve, Hose and Gardena Fittings (print in place)

This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…

Downloads
1,423
Likes
103
Rating
4
P
Printablessjogerst

3D Tesla Valve

A Tesla Valve is a type of one-way fluid valve that has no moving parts. Category: Engineering

Downloads
1,351
Likes
58
Rating
5
P
PrintablesPeterH1500

100mm / 4" Butterfly / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…

Downloads
1,267
Likes
237
Rating
5
P
PrintablesThe Brumberjack

Servo Mounted Ball Valve Blast Gate

Assembled with all of the same hardware as the original one, plus 2 longer bolts. I used 35mm I believe. Here is the link to the video where I talk about the servo motors I used.

Downloads
1,239
Likes
141
Rating
5
P
Printableswheatthinbecker

The Finger Presta Valve Cap

Combination of two models from Thingiverse: Middle Finger Schrader Valve Cap Presta Valve Cap This is the first iteration of this design, made in a few hours pretty roughly. Threads came out pretty nice with no supports inside the valve…

Downloads
1,201
Likes
112
Rating
5
P
PrintablesNiklas

Tyre Valve to Gardena Adapter

Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…

Downloads
1,187
Likes
365
Rating
4.86
P
PrintablesMarimo Labs

Schrader Valve Core Removal Tool

This tool can remove the valve core from Schrader-style valve stems. These are commonly found on mountain bikes, car tires, HVAC, and water rocket launchers . As this is a plastic tool, it cannot match the strength of a machined metal…

Downloads
1,163
Likes
71
Rating
5
P
PrintablesTwotone74

SUP-Valve to Schrader-Valve (car tire valve) Adapter

Deutsch Ich habe ein aufblasbares Bodyboard. Das ist gut für Flugreisen, aber die Pumpe ist zu groß um sie mitzunehmen. Deshalb habe ich einen Adapter auf Schrader-Ventil (Auto-Ventil) konstruiert. So kann ich das Board auch mit einer…

Downloads
1,109
Likes
119
Rating
4.86
P
PrintablesNairbF

Jeep duck valve stem

.4 nozzle .2 layer tapered hole for times when you have elephant foot I have printed it in PLA, PETG, ABS I have no idea where the file came from, I can't find the exact match on sites picked something close because printables made me

Downloads
1,067
Likes
195
Rating
5
P
PrintablesJosé Pedro

Brick Galaxy – Bike Valve Caps (Star-Wars-inspired)

Custom Bike Valve Stem Caps — “Brick Galaxy” (Star-Wars-inspired) Bring a little Force to your wheels! These Star-Wars-inspired LEGO-style valve caps snap personality onto your bike in seconds. I modeled a set of 7 mini “heads” and turned…

Downloads
1,062
Likes
469
Rating
5
P
Printablessh

💀 Skull - Bike valve cap

Info: another bike valve cap model I took skull base from @ncsandor (thanks for design!) and remodelled with some terrifying factors and adjusted so it match valve cap and is still printable without supports Not for presta valve! Print…

Downloads
1,043
Likes
191
Rating
5
P
PrintablesBearCubsTeacher

Valve Index Controllers: First Base V2

This is a simple, minimalistic base to set Valve's Index controllers on for storage and charging. The base measures 3.625"W x 3.625"D x 2.5"H. The correct charging cables must be used to work with the base properly. A small capsule-shaped…

Downloads
1,030
Likes
124
Rating
4.62
P
PrintablesLolloDuke97

Valve Tyre Volkswagen

Valve Tyre with Volkswagen logo

Downloads
1,003
Likes
143
Rating
4.67
P
PrintablesBootjevaarder

4 Stroke 4 Valves Over Head Camshaft Engine

General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…

Downloads
977
Likes
337
Rating
4.92
P
Printablesespinete

Presta valve tool

I have modeled this usefull bike tool. But I have modified original design to be able to use both "holes" to screw/unscrew presta valve core (see attached photos). I have tested and fits perfect, no loose. Enjoy Print instructions…

Downloads
970
Likes
77
Rating
4.95
P
PrintablesChrischi
18+

The source marked this model as adult content.

Downloads
969
Likes
66
Rating
4.67
P
PrintablesFyrby Additive

Inline Valve For 100mm, 125mm & 150mm Pipes

🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are butterfly valves for flexible 100mm, 125mm and 150mm pipes commonly used in ventilation. They are made to fit inside the pipes, and for you to clamp the pipes onto it from the outside. They print with no…

Downloads
965
Likes
442
Rating
5