Counting matching models…
I have remixed the case lid and put some ventilation holes in it. I hope so the heat escapes better this way. If it doesn't helps I will make another remix to mount a fan on the lid.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for PETGSource material: PET
The ICE-X Astro Ice Scraper - scientifically engineered for any atmospheric conditions, generated by human creativity and powered by AI assistance. Conquer the cold with the push of a button!
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
Designed using Sketchup Pro. All Sketchup files are available for personal modification using Sketchup. Check out the full build video here: https://youtu.be/yerYsAh5nNQ A few makers have reported that the outer cover does not fit the…
It's kinda awkward to pour in fluid under the frunk, so hopefully this will make it easier. It fits really well, snug but loose enough for guaranteed fit by any printer. I drew a compact washer fluid funnel for Tesla Model 3 using…
A much needed poop chute for the Anycubic Kobra S1 Combo. Vented at the outlet and chassis fan to avoid blockages. Screws into the machine with the original screws. With removable collection bin.
What this project aims to solve: 1) The Lid of the Creality K1 Max 3D Printer sits a bit too low. The extruder filament feed constantly rubs on the glass during prints. Some people report getting a filament feed error due to the tight…
The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…
Jetson Nano Case A minimal snap-fit case for the Nvidia Jetson Nano. The original design ( thing:3603594 ) by ecoiras was very well done, but I prefer cooling over the logo. This is for the 4GB kit with all the ports, but I imagine also…
I tailored this model to my liking. You don't have to like it, but you can have it if you do. I reshaped the vent slots to reduce unsupported bridging width. Added radii virtually everywhere to smooth the entire look out. Removed…
(STLs are in .ZIP files) (STEP files below) (3MF export from Bambu Slicer on plates) After reviewing a number of great models of Bambu Lab printer lid solutions, a couple things happened. First, the most innovative one I found was from…
The Hybrid Betweener Tired of having to swap betweeners depending on the material you are printing and its ventilation needs? And where do I keep the spare betweeners when they are not in use? This project aims to provide the only…
UPDATE 13.12.2022 Added air vents to the gasket, they are designed in a way so its impossible for light to get in. The active cooling on the Pico4 itself is awesome but when the face gasket sits perfectly on your face with the hot air…
Please consider leaving a like. or just take it and slink quietly out the side door. NOTE:- If you intend to keep the rubber strip that is already affixed to the printer frame (where the glass rests normally), then fitting the shallow…
This helps with ptfe tube from rubbing on the lid. Also added vents across the front and sides to expel some of the heat when printing in PLA. Part A and part B can be mirrored to create the whole base for the lid to sit on. Part C has…
This is the third, and hopefully final revision of a set of vented lid riser pieces for the Qidi Plus 4. This model reduces the weight of my earlier models, and tightens up some of the larger dimensions for a better overall fit. Depending…
Hello, I had trouble reliably printing the Voron Stealthburner SB2040 cover, the pilars between hexes kept on breaking, remixed to have more space between hexagons, a little less venting but printed reliably. I printed mine in ASA at 250…
Bring light into your prints! ✨ The Elegoo Centauri Carbon is a fantastic machine – but let’s be honest, it’s pretty dark inside . Inspired by the amazing original design from JesusFreak (huge thanks for the great model! 🙌), I created…
Reading reviews of the Centauri Carbon, a common early complaint was the routing of the filament PTFE tube through a rather constrictive path. Reviewing various mods, I liked the looks of this riser, but decided to also incorporate the…
For Non Vented Version Please See, https://www.printables.com/model/1652444-qidi-max-4-non-vented-riser-by-sac3d Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows the glass to slide as intended. Test printed in both PLA and…
Remix of JesusFreak vented riser. Split into parts to allow printing in different colors. The vents (blue) slide in the bottom and then the hole is plugged with the plug (red) by gluing the tabs at each end. The handle/toggle is designed…
All credit goes to RockChewer - hopefully this is a worthy successor. I extended the bottom to allow the mounting of an LED strip up to 10mm wide below the vents with an angle that should (hopefully) provide illumination throughout the…
Panels for your 10" rack. Blank / solid, or ventend with hexagons or triangles. Designed 3mm thick, but you can rescale that in the slicer if you want something different. Made to fit my 10" 2020 rack. Category: Computer
This is a WORK IN PROGRESS . I'm still in the testing and tweaking phase, but the parts should be usable. If you encounter issues, please let me know. This lid riser is for the Creality Ender 5 Max to stop the cables dragging on the…
My wife is trying to keep orchids and have them flower again. You may know that it can be a difficult task. I made this pot to help her keep the roots from rotting due to lack of airflow. So far these pots have been working out great.…
(Update 20.7.2026: FIXED!) A practical universal vented funnel with splash guard features, designed for smooth pouring and reduced spillage. The vented design helps improve flow and reduce air lock, making it useful for everyday…
I started editing Peter H's “BETTER VENTILATED FUNNEL - PARAMETRIC” so the parameters could be edited without creating an OnShape account, only to discover that they still won't let you download an STL without an account. I decided to…
I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…
The original design is of course, required for every ECC. I wanted to add a slot to install an inexpensive Humidity/Temp sensor that I could see from my desk. Simply used Fusion360 to cut a tiered slot into the original model's Front Left…
UPDATE 16/01/26 - A few people have asked for a non vented version.. This has now been added to the files, If you want the non vented version just change printing the Main body parts and print the non vented files instead (you still need…
Remixed this model. V2 Vented Remix - Updated Bambu Lab Ultimate P1P X1-C Riser+AMS Stand - Community Build! Scaled it down by roughly 30% in Z height. Saves about 600gr of filament. Also removed the vertical supports in the back, so you…
Suitable for 52mm boost guage. Right-hand drive
Summary This is a vented funnel so you can pour your liquids in much faster without having to wait for the funnel to 'burp'. There are 2 files (now 3 see below!), one of them is just a vented funnel, the other has an integrated cap that…
Fixed the "V2 Vented Remix - Updated Bambu Lab Ultimate P1P P1S X1-C Riser+AMS Stand - Community Build!"
Edited the OnShape file to have the cables exit the right, left, and rear of the enclosure which works better for my applications. The Rear exit has the holes sealed up solid. Print instructions Rafts: No Supports: No Resolution: .20…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
K1 Max top mounted filament spool holder modded to use vented raiser from NorcoT https://www.printables.com/model/623798
The original model is a great fit for your Sunlu S1 or S2 Dryer, but I didn't like the amount of larger slots that made printing harder & slower. I also feared the dessicant would fall through some of the slots. I remixed it to be…
This is the first version of my K1 Max Lid Riser with an optional vent cover. I printed it on my K1 Max in PLA (will I prototype) using the default orca slicer profile. Completed in 2 x print sessions. all components are glued together…
VenterMech integrated v-core 3 arms Note, due to licensing requirements from prusaprinters.org the ventermech STLs cannot be posted here. Please contact Liam Venter([email protected]) for them. Jan 9, 2022: Update - the script now…
Low Profile Vented PCIe Bracket – replacement bracket designed for low profile (half-height) PCI Express cards. Features ventilation slots to improve airflow and cooling within the case. Ideal for compact or small form factor (SFF) PC…
Nerf Barrel to fit Elite 2.0. Short, 90mm overall length. Dual tube with vented outer. Support only needed for the raised inner tube section. Printed using normal supports, 80 deg overhang, touching buildplate. Mostly walls, infill only…
I've remixed this great print from JP3DArt that helps the PTFE tube from rubbing on the lid. 1 - I added tongue and groove joints to assemble it all together. 2 - I raised the PTFE tube entrance in the back to allow it to sit on top of…
Fix the seam to the same coordinate on both parts, that will guide you putting it together. No supports needed.
fan facilitates active cooling for the electronics and pancake stepper, also a model with extra room for EBB
I bought these cute little 5v power supplies and wanted a cover for them. I design it in OpenSCAD. Print instructions I used Prusa PLA, print settings .20 mm SPEED MK3, no supports, fill density 20%.…
Print with orientation as shown. Insert as shown with whichever side is needed. Top of device (right-way-up) is indicated by the 3 little grooves (for texture). I used one while printing and it didn't fall out, but your experience may…
This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…
Cooling for inventer GoodWe with 120 mm fan
A remix for the top glass riser that opens to the left for faster access to the extruder. Added one part with no anchor in case you're using the 270 degree door hinges, which already uses the front left screw.
This is a remix of organicap's original design, but I added vents to the bottom and the lid to provide better cooling. This enclosure can hold a either a SATA or IDE 3.5" hard drive or a 2.5" "with an adapter" hard drive fastened by side…
Same point as the original, this is remixed from ( DeLonghi espresso machine pre-ground coffee funnel cap by Petclaud - Thingiverse ) . Useful if machine is used in a shared area by people that may mistake the grounds funnel as the bean…
These covers are for the Gigabyte Aorus RTX 5080 Master Ice (I've only tested these on the white card, so I'm unsure if they'll fit the black version). The purpose of them is to cover the heatsink and the back of the socket while still…
I didn't like the styling of any of the existing lid risers for Bambu Lab printers, so I made my own! My goal was to avoid having to deal with the glass lid to give it ventilation and it's doing its job admirably. The frame slots together…
OpenRC F1 lid with intake duct
Building JohnJacky's enclosure for the V400. To increase cooling air flow, use these sides with the ventilated version of JohnJacky's risers: Perforated Upper Plate Risers…
Use this spacer to keep your Centauri Carbon interior cooler, mount panel hinges, mount an interior spool holder, or all of the above. You will minimally need 8x 12mm M3 machine screws. Knurled heat-set inserts (M3-4x4mm) are the easiest…
Funnels for adding lubricant into motorcycles, cars, trucks, atvs, rtvs, boats, mowers, chainsaws and for other other liquids and purposes as needed, like in the kitchen. Included are 8, 17, 18, 23, 24, 25, 26, 27, 28, 29, 30mm and 60mm…
WARNING : Not for use with non-LED bulbs (unless you print this in an exotic super high temp material) Needed some workspace lighting for my workbenches around the office and pendant lights seemed like an easy way to go. I was shocked at…
I really liked Ibot_3D's vented design, but it doesn't really create room to fit heatsinks on the rp2040 (and to a lesser degree the tmc chip). So I modified it to make room. It turned out actually pretty decent. Careful when…
First of all, I know it seems silly to make a lid prop for use on top of a vented riser. Let me explain….. I printed my riser with only 1 vented and 3 un-vented sides. I figured that it's easier to have the chamber get to and hold a…
QIDI MAX 4 NON-VENTED RISER BY SAC3D For Vented Version Please See, https://www.printables.com/model/1604271-qidi-max-4-vented-riser-by-sac3d Non Vented Riser for Qidi Max 4. Tested in PLA and PETG. Allows glass to slide as intended.…
It's a vented cover for a 3.5" PVC Pipe. The cover is a Male slip fitting, but fits snug since I made the model ever so slightly larger than the average size. Our use case was to cover a PVC dryer vent on the outside of the house to keep…
Vented cover plate for the 4000D Airflow Mid Tower Case. Compatible with 120mm fans.
My extruder board was overheating, so I made a vented cover to allow it to breathe better.
A different bonnet for the Landy Mini, pimp your landy. Print at whatever works best for you.
interesting read https://www.orbiterprojects.com/how-hot-is-too-hot/
I enjoyed this print so much that I wanted to do it again and add some upgrades. The one in these photos is the final test print before I buy a new roll of ASA and complete the final version. I liked the contrast, so I thought I’d share…
The original basket weave design by psychprod is ingenious, but being me, as soon as I printed it I knew I would like to tweak a few things, and, again being me, the best way to do so would be to remodel the whole thing from scratch...…
This model is compatible with the lego system.
Ever faced a situation where you pour some liquid into a container using a funnel and have issues with venting? For me it always happens when changing oil in my car. When I'm pouring used oil from the collection basin into the empty oil…
Based on the original Qidi model, saves about 20g uses 5 mm magnets (check fitting depth, you may require 1 or 2 per side, or just edit the model to fit original 4mm magnets) NOTE - your build area will be reduced by 8mm, so you have to…
2 part 120mm Vented fan cover. Made to allow a dust filter in between top and bottom plates. Easy fit clips with low tension to allow hassle free replacement of the filter. Base plate uses existing mounting screws for secure fit.
Made a keychain version of ElGato's cool Seventeen logo. Pics are two flavors of silk PLA that I switched on the fly. Thought the big one was too big so scaled it down to 70% for a smaller one. Pen knife for scale.
I recently bought an AD5M and printed the enclosure. Because I don't know what all is in the dyes, stabilizers, etc. of the PLA I use, I modified one of the risers to have a 4" hose outlet. I use dryer duct and a duct fan (sold on Amazon…
easily reuse empty bottles -washer fluid -antifreeze / coolant, -used oil, etc...
This Raspberry pi case is specifically designed to fit the 3.5 in LCD screen currently available on Amazon for less than $15. CUQI 3.5 Inch Touchscreen for Raspberry Pi There are other similar and will probably work just as well. I added…
I edited panels for easier print, added center hook for LED strip (sides, back panels). Edited in FreeCad.
Vented door with 3010 fan, designed to cool efficiently stepper and driver, has extra room for BTT EBB
I had the same problem as one of the other commentors. Once printed, the frame was slightly too large to fit on top of the X1C. I removed 1.5mm from each of the rear pieces between the last vent hole and the corner. The glass still fits…
Vented riser for Flashforge AD5M, modified from this design to not interfere with spool holder. I also added a magnetic connector: press-fit ½" neodymium magnets into the recesses (I bought them at Home Depot). If you don't want to use…
The spool roll is slightly shorted as the two uprights are now slightly closer together. Base of uprights modified to sit on top of vented riser. You need to remove the vent sliders and then this clips on top. Sits quite tightly to the…
Model work in progress, not final Here is a top cover for the Elitedesk mentioned in title, this sports mounting for the front cover with two screws and attachment to the rear screw. Vent design can be customized by changing sparse infill…
pay attention to few places that may need support
A Vented Herringbone-esque 1U 10-in Rack Blank
Added vent holes to Heiliger_Bimbam's design.
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. I…
Da mit kann ich mein Wechselrichter mit 4x 120 Lüfter Kühlen This allows me to cool my inverter with 4x 120 fans
A rack shelf for a Mac Mini M4 (2024) in a 10" rack. Includes air vents below the computer and optionally a keystone jack on both sides so rear ports can be routed to the front of the rack.
M-LOK rail covers I used PC blend for these and it worked great. The covers fit very snug so you may need to scale them down a tiny bit, depending on your printers calibration.
Remixed fruit fly trap lid for mason jar. Added 102% scaled version that fits less tight. Printing is yellow, white, red or green are suppose to attract fruit flies more.
6" diameter cat planter with vented liner. The liner comes out and is printed separately. There are holes in the side of the liner and spaces at the top between the liner and the pot to let air in. Neither need any support or adhesion.…
I finally upgraded to this Qidi Plus 4 printer. The glass top is great, but for low temp prints (PLA, etc), where do you put it? ALSO, my printer is in my garage which gets dusty. So I want the top in place just to reduce dust settling…
Prevent your precious AV equipment over heating by increasing the ventilation in your Ikea Bestå TV bench with this vented cable grommet. Comes in three versions. A solid vent, a centre hole and a right hole (can be mirrored in your…
The model covers the front of a 1U rack mounted shelf that occupies 2U of rack space. It sounds strange I know. This panel allows for excellent airflow for anything sitting on your 1U shelf while keeping it hidden and away from prying…
Box and lid for ESP32 modules (NodeMCU boards and similars). The BME280 version offers a mount point for the sensor below the main board. Also, the box then has vents. However, testing revealed that the board gets so warm that the sensor…
About This is a filament cleaner and backspin preventer for the QIDI X-Plus and X-Max. It was originally designed for one of my other designs but I never included it there. It should fit all printers using a 6 mm bowden tube as well. To…
I put these in filament spools that are stored in my filament storage bins. (I use Ezy Storage 18L/19Qt Waterproof Clear Latch Totes, which hold 5 spools, are stackable, and seal well with silicone grease applied to the gasket.) These…
Ι wanted: A vented riser so I can print with the door closed and not fuss with the lid The ability to have the ACE on top without being too tall (because I’m a shorty) The ability to add LEDs with an external power switch To match the…
