10,817 models
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5 inches) American triple hole punch (distance 4 1/4", hole radius 1/4")…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
It's a two-metre version of my low-poly world map, and the biggest printing project I've done so far. It took me a couple of months and about 5kg of filament to print (including some failed prints). It is quite easy to print. Just print…
Print approx. €5.03–€6.15 excl. taxPreliminary estimate for one variant
Easy to use - Version 2.0 Better readable
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
What is this [ Update 3: Added variants without interlocks after a specific user request.] [ Update 2: Added a larger triple hex cup after a user suggested it. Check the file section.] [ Update 1: Added two variants with greater wall…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
Print approx. €14.44–€17.65 excl. taxPreliminary estimate for PETGSource material: PET
This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
It's a one-metre version of my low-poly world map ( bigger version (the real images show the two-metre version)) It is quite easy to print. Just print each individual files. Use the last picture, which shows how the parts come together,…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
The new center marker, now with ruler incl. and a more robust design !!!
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
A modified version of the 35mm DIN Rail bracket by Fabian. Uses heat inserts (M3 x D4.6 x L4.0). Hole spacing is 51mm. Step file included. A springless version is available here .
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
In this final version, I’ve incorporated all the feedback and suggestions. The whistle is now even easier to print thanks to improvements in the internal structure. With thicker walls and an optimized design, it’s also louder than before.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Side panel to construct a (stackable) shoe rack from 18x200mm wood boards. Fits exactly on an MK3(S) printbed. The model is customizable on OnShape via variables . This is a re-model for metric wood boards of the original:…
Print approx. €12.63–€15.44 excl. taxPreliminary estimate for PETGSource material: PET
2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
Print approx. €14.42–€17.62 excl. taxPreliminary estimate for one variant
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
larger compartments 80x35mm new design
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for one variant
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
Print approx. €1.66–€2.02 excl. taxPreliminary estimate for PETGSource material: PET
Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I downloaded the Free version of Eclipsons Model A. but there is the fuselage with the Landinggear not included. So i designed one to glue on the free version. it takes D3mm steelrods, wich are bended in shape. 15mm then 90° angle, then…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
UPDATE!!!! Oct. 2020 I change the case a little bit and the upper and lower mount. If you print the old case and your mounts doesnt fit, you only print the mounts new. then it works. Sorry You need 2 x upper mount and 1 x lower mount.…
Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
With THE COUNTER you get an updated version of THE CLICK BUTTON . This includes a working ballpen mechanism in a compact form combined with a counter from 1 to 8. No support is needed. And with the following assembly video you are good to…
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
The Hotrod Racer Balloon Car by Polly-Jeanius is very cool, but it requires you to use glue, and I'm not particularly eager to use glue. Therefore, I have remixed the model using slightly modified axles from my building kit to allow me to…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
GoPro Hero 10 (9) Battery Cover | Cold Shoe Version available Simple and fast to print cover for the GoPro Hero 10 (and 9) to allow charging while recording. Useful for long video recordings or time lapses. The Cold Shoe variant is useful…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
I continue my streak of classic comic inspired 3D statues / dioramas / sculptures (more are in the works, be sure to follow if you want to be notified). This time around I decided to create my personal interpretation of the classic red…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
25/04/2024: V2 Version - added cutouts to the sides so sharpies and pens with pocket clips should also fit 4 of the holders now. Thank you @XanderShade01_404080 for the idea. Here is a link to his remixed version.…
Print approx. €1.71–€2.10 excl. taxPreliminary estimate for one variant
Bed Scraper / Spatula This is a modified version of the PRUSA one. Handle width is good, I just wanted it thicker. Handle is now 7.62mm thick. (0.300” inches) All edges finger safe, except front blade edge. PLA scraper version for TPU…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
This male head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features! New Version!
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
CArts Little Acro EDF-Version Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 600-650 g Drive: EDF 50mm diameter Propeller : folding propeller Battery: 3S Lipo 1000 mAh Controls: elevator / rudder /…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
The pot is inspired by the structure of another old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Print approx. €7.56–€9.24 excl. taxPreliminary estimate for PETGSource material: PET
***NO SUPPORTS REQUIRED FOR ANY OF THE PARTS.*** To assemble, place the flip tabs upright in the game base and feed a piece of filament through the game base mounts and the flip tabs. Try to straighten out the filament somewhat before…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Ich habe mich immer geärgert, dass das Eisfach des Thetford-Kühlschranks nicht offen blieb, wenn wir das Fahrzeug in den Winterschlaf geschickt haben. Natürlich geht auch ein Korken. Diese Ecke bleibt aber, wo sie hin soll. Mein…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Wargame Walls Fan Room Version 2 Section 15 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €7.11–€8.68 excl. taxPreliminary estimate for one variant
This is an lenght increased version of the really nice laptop stand from WestInSpace. It works perfect on my 15' HP Envy. Print settings I used: 3 Perimeter 0.2mm layerhight 15% Gyroid infill Sunlu PLA Matte Black This gives a total…
Print approx. €5.61–€6.85 excl. taxPreliminary estimate for one variant
The holder works for the slightly fatter plastic calipers and the slightly thinner metal types. Easy to insert and remove the calipers. Print upside down. Use a brim to help hold the pegboard tips down if your adhesion to the buildplate…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
PROTECTION COVER FOR SUMUP AIR, CAN BE PRINTED IN BOTH PLA, PET-G, TPU. VERY EASY TO INSERT AND REMOVE THE DEVICE. FOR A BETTER FINISH I RECOMMEND PRINTING IT Upside-down AND ADDING THE SUPPORTS FOR MEDIA I RECOMMEND THESE SETTINGS FOR PLA
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…
Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant
Čepičky pro označení umístění kol na autě. Verze se závitem,pro výměnu za stávající čepičky a verze bez závitu pro nasazení na nejběžnější plastový typ čepiček, průměr 9,8mm. Valve caps for distinction Wheels placing (position) on car.…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Print approx. €5.91–€7.22 excl. taxPreliminary estimate for one variant
Star Wars Chopper: Thick Mini Version. Added an even thicker version (2/11/2025) Aptly nammed “Chopperthick.***” Small parts should be more stable. Thanks Ben for the feedback!
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A printable version of a Cavalier King Charles Spaniel dog. Also includes a version with a hollow cylinder on top of the dog's head so you can put it on a keychain. I used PrusaSlicer 2.6.0-alpha4 with this model. I had to use custom…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
This is the mmu2s Version of my single version - an relatively Easy Print to give your Telecaster a personal touch :) Design is made for a mmu2s printer. You can create special effects if you are printing without bottom/top Layers, just…
Print approx. €2.93–€3.59 excl. taxPreliminary estimate for one variant
This is the “Freight Ten” Command version as inspired by my four “Mongruxx” Novels. For all of you Sci Fy tread heads out there. Transport your Armoured Shelter…
Print approx. €11.12–€13.59 excl. taxPreliminary estimate for one variant
Self defense use, a novelty, or whatever you choose. Maybe this will help you drink from the skull of your enemies? Maybe use it while smoking a cigar and using the skull of your enemies as an ashtray.…
Print approx. €5.68–€6.94 excl. taxPreliminary estimate for PETGSource material: PET
My kids like Sdvalentones Bullet Bill / Banzai Bill very much, but they wanted hands for it. So I found some hands in jamesglanville Bullet Bill model, took them, fused the halves together in Tinkercad, enlarged them and put them on…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Hnefatafl one of the oldest board game in the world. Also known as the viking game or abbreviated as Tafl. The game is very similar to the game Tablut which was played by the Vikings. The game is played by 2 players from 7 years old. The…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Since this model uses bridge infill as the door texture, it's recommended to use Classic instead of Arachne. I provided models with NO shelves and also clean fronts so you can do your thing.
Print approx. €5.76–€7.03 excl. taxPreliminary estimate for one variant
Bust of Louisiana Creole practitioner of Voodoo. Also included are Planter Versions. Note: Some of the files are for just the bust and some files are for the Planter version. Stunning. One of my favorites.
Print approx. €12.48–€15.26 excl. taxPreliminary estimate for one variant
I love the closed version but it wasn't working very well for me mainly because the curve of the filament was causing a jam and the clip wasn't moving freely. I have removed a part of the closed section and this allows the filament to…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Imagine a million years lost in space and time, after crashing through a vortex of loose change it has transformed my original creation into a stealth low poly rocket bank. Be warned it's a bit battle scarred and dented but still holds…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…
Print approx. €4.50–€5.51 excl. taxPreliminary estimate for one variant
[Update 2022-11] Bug fixes, optimization and improvements : the true Finale version Material change : the PolyCarbonate Carbon Fiber(PC-CF) from Prusament is awesome for the spider support ! Secondary support now fits the original cap and…
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for PETGSource material: PET
Improvement of the original model. Vylepšení původního modelu.
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Reason for redraw Checked with SO who will use it most. She requested it to clamp to the box, so when you pick it up for closer inspection it won't fall off. The slit has two protrusions which creates a distance slightly less than the…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
Auf der Suche nach einem Filterhalter und einem Griff für den 40W Laserkopf, bin ich zwar mehrfach fündig geworden, nichts davon gefiel mir so richtig, daher konstruierte ich eine Kombination aus beidem. Es gibt ein Oberteil, in das ich…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
A few people had broken the slim finger ring on the original so I beefed it up a bit. No supports needed, you may have to clean up the finger ring a little.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
Perfect for turning a tab-out cassette into a tab-in cassette for recording purposes. These tabs easily click in and click out and can be used over and over again.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Print in PLA works, but I like to print this holder in PETG to give it a little more flexibility. Use for watch, smartwatch (e.g. Open Smartwatch) Update: 13th January 2023 As mentioned in the comments, I've added some more versions to…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
This will go times 2 in my RC 4WD design (in progress) but it also drives (partly) of the overall design size. So I decided to streamline a little bit. I was able to design a print in place part (much shorter) but prone to breaking (!) So…
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for one variant
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole. The fit now is very tight. In addition to the original model where you could only position the links horizontally,…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This model is printed in vase mode at 0.4mm and then turned inside out. This toggles back and forth between a “demon lord” and a bunch of hearts. Share it with someone who will be pleasantly surprised. Other heart designs I have made.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
modificación del cenicero para puros
Print approx. €38.12–€46.59 excl. taxPreliminary estimate for one variant
The angle is stabilized by the guide in the profile and is fixed with M6 countersunk screws. Is a favorable alternative to the metal version. Suitable For this a printable slot nut to insert into the profile:…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
RJ-45 Network Jack Dust Cover Plug Wanted a good one, ended up designing my own. I wanted something that emulates a RJ-45 plug and stays in place. Sample blue parts printed in Polymaker PRO PLA. Tab actual locks parts in place. Tab also…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A variation or original minimal design.
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
(Edit: I finally learned how to intrude text to objects, so I have removed the Project files, and you can create your own. Basically everything is printed on 0.20mm STRUCTURAL and 15% infill, with a 0.4 nozzle in PETG.) 2 sets of…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
This is the ‘slice tray’ for the Multisystem gaming console, designed for general purpose expansion and the CTRLDock Classic / Super CTRLDock range of controller interfaces and future controls. Slice tray is designed to be used with the…
Print approx. €8.34–€10.19 excl. taxPreliminary estimate for one variant
I got the idea after watching this video on twitter of two people playing this game. This little video should explain the rules really good. I made a travel version for this game where you can click the figures and walls into place. with…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
I really like the remixed print sheet holder, but could not use it anymore with my Ikea Drybox Mount . So I created this remix which makes the print sheets accessible from the side. Like the original the holder gets mounted with two M3…
Print approx. €4.99–€6.09 excl. taxPreliminary estimate for one variant
FR: Version française d'un modèle payant sur Cults du test “Si vous pouvez lire ceci, régler votre stringing” EN: French Version of "If You Can Read This - Fix Your Stringing" A paying model on Cults
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This model is a replacement for the included desktop charging stand. It was designed to be wall mounted and use the original power supply. It has several parts and requires some specialized fasteners which can be found at most ACE…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the Skadis Boards linker by Koprov that has thicker pegs to provide extra tight fit in the board's hole and imbedded magnets for light tools. The fit now is very tight. In addition to the original model where you could…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
For the Prusa MK3/S, print 12 pentagons in either PETG, PLA or use the STL file to slice for your printer. I used PETG at 20% infill. Print time 41 minutes. Assemble the Dodecahedron using 60 small zip ties , 10cm in length. The angled…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
![[Updated] Bring your Heritage to the Moon - Final Version](https://media.printables.com/media/prints/78715/images/2674943_62ba4721-ff80-416e-a4c7-6974fb7fe8bb/pxl_20220919_220005108.jpg)
![Universal watch stand - 18 versions [2 sizes, 3 widths, 3 patterns]](https://media.printables.com/media/prints/121120/images/3106328_e464a468-3267-4ec0-9121-f8312617e74b/watchstandcover.jpg)
