Search results: vic

Sort order

3,769 models

P
Printablesmarkus_m83

G-Clamp ; Mini Vice

Hey there, This thing is a small clamp for holding items down. The normal frame has a capacity of about 43 mm and is quiet strong. If the clamp is too short for your disered use, just print the long frame and screw or scale it up via your…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,428
Likes
492
Rating
4.87
P
Printablesclivebradshaw

Metric screw measuring device

This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
2,347
Likes
347
Rating
4.92
P

3D Printed Circuit Splitter and Flow Restriction Devices for Multiple Patient Lung Ventilation

THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…

Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant

Downloads
2,000
Likes
50
Rating
0
P
Printablestrendspoke

Airplane Device Holder

A small tablet holder to hook to an airplane table. Holding together by magnets The middle holder isn't really necessary, just made it to hold 2 devices a bit overlapping in the middle.

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
1,649
Likes
217
Rating
4.96
P
PrintablesLyle Scott

Filament Spool Transfer Device

A brief video deomonstration: https://youtube.com/shorts/kiZKUkexKrg?si=kBOF8F9uXhrnBcDT Inspired by the struggles of some printers to use cardboard spools, this device will ensure level winding of filament onto a new plastic spool. Run…

Downloads
1,635
Likes
294
Rating
5
P
PrintablesHD_Creator

Miniature vice - Upgrade for hand knob

Thanks to feedback from a user of my very popular miniature vice with table clamp, I realized that access to the the hand knob on the vice was a bit hindered by a part of the table clamp. If you don't have the vice yet, get it here:…

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,488
Likes
274
Rating
4.64
P
PrintablesDMS

Digivice Digimon Adventure

Rework of an older model I made. Comes separated in several parts that snap fit together (with the exception of the screen and antenna parts, these must be glued to the body), so it can be post-processed and painted easier. Made in Cinema…

Downloads
1,027
Likes
204
Rating
4.5
P
PrintablesVortyZA

Corner clamp/vice

Needed a few corner clamps for a box I'm making to hold the corners straight while the glue dries. I figured if I needed this then someone else might too, so here it is! BTW I tried a couple of other designs but they didn't work very well…

Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant

Downloads
959
Likes
197
Rating
4.81
P
PrintablesMiguel M.

5 inch vice soft jaws

These are vise soft jaws designed 5 inch vise There are 4 recesses in the back for 8x3mm magnets. You could use it without magnets or just the 2 on the front face but 4 holds it really nicely to the vise. I used C.A. glue to hold them in…

Downloads
837
Likes
178
Rating
5
P
Printables93djen

round vice - 3 point clamp

To be able to clamp round parts i designed a 3 point clamp that can be printed. Its not that easy to print since good tolerances and strong parts are needed. Better tolerances lead to less play and therefore better clamping. I used 4…

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant

Downloads
827
Likes
110
Rating
5
P
PrintablesAinon3Dtisk

Centering device for finding the center

Hello, Welcome to my profile, full of models and miniatures :-) I have here for you a Special tool for finding the center on a round rod or tube, just on any round thing. Suitable for the workshop for various uses. I used Bambulab PLA…

Downloads
546
Likes
193
Rating
5
P
PrintablesKubak

Babylock Victory waste collector

One of my first designs. Guess it could be improved, but it works.

Print approx. €8.07–€9.86 excl. taxPreliminary estimate for one variant

Downloads
481
Likes
26
Rating
4.83
P
PrintablesAinon3Dtisk

A device for eating chips, nachos

Hello, Welcome to my profile, full of models and miniatures :-) I have for you a device for eating chips, nachos. Chopsticks for eating with fingers. They are suitable when you work on a PC and do not want to get your mouse and keyboard…

Downloads
475
Likes
31
Rating
5
P
PrintablesAntro

DJI mini 2 (Mavic mini 2) battery extractor

There are two options: simpler, thinner version bit bigger v2 with small grips for more comfortable use I recomend to print without supports but enable all option showed below You probably should print it with supports if you want make…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
71
Rating
4.4
P
PrintablesTeo_211

Honda Civic Type R FK8 Wall Art

Wall Art silhouette of the Honda Civic Type R FK8. Adjustable size. I accept model suggestions or ideas you have.

Downloads
335
Likes
56
Rating
5
P
PrintablesSJM

"Lokliege" Model Train Service Port H0

H0 1:87 Model Train Service Port “Lokliege”. You get a single 245mm width or five connectable sizes (100mm, 150mm, 200mm, 225mm, 240mm) to build the width you prefer. It will fit at least all H0 1:87 model trains but maybe usable for…

Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
312
Likes
44
Rating
5
P
PrintablesDoomMeister

Pin Vice / Pin Chuck

A pin vice, I wanted too be able to keep a couple of these around with known drill sizes in for deburring holes or reaming out dowel holes in 3d prints. I've seen one or two models about but they seem sized only for 1/8" shank pcb drill,…

Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
50
Rating
5
P
PrintablesMATHOBB

Karcher Crevice nozzle 200mm DN35 / štrbinová hubica

Simple but solid crevice nozzle for Karcher SE.5100 Inner Ø: 35mm Height: 200mm You can print from PLA (the walls are quite thick). Use PETG for better durability and flexibility.

Downloads
239
Likes
32
Rating
5
P
Printablescv0x

Honda Civic EK/EJ typeR rear lip holder

Honda Civic EK/EJ (96-00) typeR rear lip holder Printer: JGAurora A5S Rafts: No Supports: No Resolution: 0.4mm nozzle, 0.20mm layer height Perimeters: 6 Infill: 30% Filament material: PLA Notes: On the edges behind the wheels I added it…

Downloads
218
Likes
38
Rating
0
P
Printablescookiecrook

Cole Jaw Bumpers for wood lathe chucks: Nova, VicMarc, etc.

IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…

Downloads
170
Likes
28
Rating
0
P
Printablesron

Charging station - Wall mount - Phone , Tablet , other devices

Maturity: Very good. 8 prototypes. In use since 2024/04. Personally I fixed my charger with some double-sided tape inside the charging station. Accept charger with the sizes: Up to 150x30mm Up to 75x40mm Slot space is 21mm. Printing…

Print approx. €27.74–€33.90 excl. taxPreliminary estimate for one variant

Downloads
145
Likes
34
Rating
5
P
Printables_KaszpiR_

M6x75mm bolt for Miniature Vice 2.0

About: So I printed Miniature Vise 2.0 (much easier to assemble and 100% printable) and noticed I do not have a bolt for it. Yet the Miniature Vice 2.0 => 100% printed, no metal parts required contains the bolt but it has different head…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
129
Likes
2
Rating
0
P
PrintablesRob Latour

Victron 500A Smart Shunt cover

This is a cover for a Victron 500A Smart Shunt. It has been designed with the cables coming out in a specific direction (as seen in the photos). However, if the cables on your system come out in another direction you are welcome to vary…

Downloads
123
Likes
9
Rating
0
P
PrintablesPeter Farell

Zlatan Ibrahimovic Funk@ P@P (AI)

Zlatan Ibrahimovic Funk@ P@P Check out Cleopatra. https://www.printables.com/model/804684-cleopatra-funk-pp-bobble-head-ai

Downloads
116
Likes
24
Rating
0
P
PrintablesDrebinWorks

Avocado cultivation device

I have created a simple cultivation device for avocado seeds within cylindrical containers. Printed with bavarian wheat beer glasses in mind. Therefore the inner diameter should be smaller than 85 mm. Printed with Polymakler PLA.

Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant

Downloads
108
Likes
43
Rating
0
P
Printablesayjay

protective jaws for a vice with holder for round material like pipes - Schonbacken für einen Schraubstock mit Halterung für rundes Material wie Rohre

The protective jaws have notches with which round material such as pipes can be securely clamped. There are holes for magnets (diameter 6 mm, height 3 mm) included. This is possible vertically or horizontally. It works well with PLA, but…

Downloads
104
Likes
15
Rating
0
P
PrintablesGCV3D

Vice Suspension Bookend

Overview Double-ended vice bookend that can be used to suspend your books in midair to add some flair to your bookshelf! I made the design in OnShape and there are a couple versions to choose from: Modern - sleek design with a modern…

Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
77
Rating
0
P
PrintablesMaWoKo_3D_Druck

Victorinox 58mm Mini

Cover für das Victorinox Mini, lasst bitte einen Like da oder folgt mir für mehr damit ihr nichts Neues Verpasst Danke MazZe_2880

Downloads
92
Likes
17
Rating
0
P
PrintablesUKE

Replacement closure for a SAVIC pet carrier

Replacement closure for a pet carrier. The spare part fits on a "Savic Transportbox Trotter 2 Pet Carrier". For better durability, be sure to use PETG. I hope this part is helpful to you - we have already replaced two as they like to "get…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
84
Likes
61
Rating
0
P
PrintablesFilip

Device holder CFMOTO 450MT

Mobile holder CFMOTO 450MT

Print approx. €11.41–€13.94 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
5
Rating
4
P
PrintablesZbyněk Král

TOPEX Vice Jaws for electronics

Print instructions: I recommend printing from PETG. To strengthen the area around the nuts, I adjusted the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports are necessary. Parts list: Printed…

Downloads
75
Likes
10
Rating
0
P
PrintablesTurbopstros

Victorinox Swiss Army Knife Hooks for IKEA SKADIS

Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…

Downloads
69
Likes
20
Rating
5
P
PrintablesBuggi

Belt loop folding device / Gürtelschlaufenfalter

This is a folding device to make belt loops for sewing pants. There are 2 versions, one for 2,5cm stripes, and one for 5cm stripes. You need a coverlock machine to sew them just after they come out of the folding device. An option is to…

Print approx. €1.75–€2.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
57
Likes
15
Rating
0
P
PrintablesMarcos Thimmig

The Digivigivice

Orignal art by @JojogapeArts twitter i only made it solid for print with his permision

Downloads
57
Likes
22
Rating
1
P
PrintablesRob Latour

Victron Lynx Distributor back panel mod

Designed for the Victron Lynx Distributor M8 (not sure if it fits in the M10 version). Provides two slots in the back to allow smaller gauge wire to be run out the back end without opening up the whole back end of the device. Includes…

Downloads
53
Likes
11
Rating
0
P
PrintablesCalipee

Print-in-Place Container for Victorinox Tomato Knife V2

This is an updated version of my Print-in-Place Container for Victorinox Tomato Knife . The old version had some issues when inserting the knife and the magnets didn't fit well. The new version still need two magnets (≤ 8mm diameter) but…

Downloads
49
Likes
12
Rating
0
P
PrintablesSirPrintsALot

Vice Grip for Angled Table Edge of IKEA Lisabo

Wanted to use this vice grip on my IKEA Lisabo Table but I needed something to flatten the chamfered edge of the table for it to work. Used a countersunk wood screw to hold it onto the table.

Downloads
43
Likes
8
Rating
0
P
PrintablesMuad´Dib

Klíčenky - Slovanské symboly 1 kulaté (Keychains - Slavic symbols 1 round)

Několik slovanských symbolů v podobě klíček. Several Slavic symbols in the form of keychains.

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
4
Rating
0
P
Printableskennyd1gital

Woody's Beard Oil Transfer Device

Connect two bottles of Woody's Beard & Tattoo Oil together to allow the remnants of one to drain into the other. Never waste a drop of that precious beard oil again! Printing: Print with the “cone” shape of the internal funnel facing up…

Downloads
28
Likes
9
Rating
0
P
PrintablesAinon3Dtisk

Priests, sorceresses, novices, mummies

Hello, Today I have for you Priests, Sorceress, Novice, Mummy or whatever you wish. Suitable for board game figures, or just for a diorama. It is fully authentic, suitable for coloring. I used PLA/PETG Basic as the material No need to use…

Downloads
27
Likes
8
Rating
0
P
PrintablesZbyněk Král

TOPEX Vice Jaws for fine parts

Print instructions: I recommend printing from PETG. To strengthen the area around the nut, I modified the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports recommended. Parts list: Printed Jaws…

Downloads
27
Likes
3
Rating
0
P
PrintablesZbyněk Král

TOPEX Vice Jaws for shaped parts

Print instructions: I recommend printing from PETG. To strengthen the area around the nut, I modified the print using modifiers. Please see the attached 3MF file for detailed print settings. Supports recommended, consider them for form…

Downloads
26
Likes
6
Rating
0
P
PrintablesBelbo

NMR tube stiring device

A model designed for use in the laboratory is available here. In NMR reactions, the mixing of the sample is always a problem, if you do not have an extra rotary apparatus. With this model, a rotary evaporator, which can actually be found…

Downloads
25
Likes
0
Rating
0
P
PrintablesKitReplicados

2001 Civic DX USB

Use the blank cap for USB Extension

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
2
Rating
0
P
PrintablesTec

Savic Rody Cavia - watering hole stuffing / ucpávka napájecího otvoru

Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
0
Rating
0
P
PrintablesGabT

Vacuum Crevice tool Inner diameter 34mm to 32mm

Someone have a vacuum where standard accessories doesn't fit on it. So, I design it to fit for its vacuum. It is mainly use for car cleaning. The part was print PETG with perimeters parameter set to 3 and an infill of 20%.

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
1
Rating
0
P
PrintablesMuad´Dib

Medailony - Slovanské symboly 1 hranaté (Medallions - Slavic symbols 1 square)

Několik slovanských symbolů v podobě medailonů Several Slavic symbols in the form of medallions

Downloads
20
Likes
5
Rating
0
P
PrintablesMuad´Dib

Klíčenky - Slovanské symboly 1 hranaté (Keychains - Slavic symbols 1 square)

Několik slovanských symbolů v podobě klíčenek Several Slavic symbols in the form of keychains

Downloads
20
Likes
4
Rating
0
P
PrintablesRosti

Catan VP counter / Victory Points

This is a rotary victory point (VP) counter for the Catan board game. Starting value 2 (minimum VP you can have) up to 9 plus a 'star' for the winning 10 value. For use by each individual player. Sized to be smaller than a Catan resource…

Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
3
Rating
0
P
PrintablesAGGRC

Inclined Salamander Positioning Device (ISPD) or AxoLounge

The Inclined Salamander Positioning Device (ISPD) is a 3-D printed device designed to assist with the collection of sperm from axolotls and has potential uses for other salamander species. This device could also be applied to veterinary…

Downloads
17
Likes
7
Rating
0
P
PrintablesReed Bowman

Anti-snap device for Prusa top-mounted spool holder

I wanted to call it a heart attack preventer. But that might be seen as false advertising. When the printer is going in the other room, you know you're listening for untoward sounds. The one that gets me every time is the loud snap when…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
0
Rating
0
P
PrintablesKaxna

ETA Vital Blend 3100 90000 - vicko

Víčko na mixér ETA Vital Blend 3100 90000

Print approx. €2.76–€3.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
PrintablesMuad´Dib

Medailony - Slovanské symboly 1 kulaté (Medallions - Slavic symbols 1 round)

Několik slovanských symbolů v podobě medailonů. Several Slavic symbols in the form of medallions.

Downloads
11
Likes
2
Rating
0
P
PrintablesMuad´Dib

Klíčenky - Slovanské symboly 2 kulaté (Keychains - Slavic symbols 2 round)

Několik slovanských symbolů v podobě klíček. Several Slavic symbols in the form of keychains.

Downloads
11
Likes
5
Rating
0
P
PrintablesDevise3D

Rotating Gripper Vice Attachment

Enhance the versatility of your Portable Zyliss All-Purpose Vise with these 3D printable rotating grippers! Designed to hold pipes, dowels, and circular objects securely, as well as position square pieces of wood diagonally, these jaws…

Downloads
8
Likes
1
Rating
0
P
PrintablesMuad´Dib

Medailony - Slovanské symboly 2 hranaté (Medallions - Slavic symbols 2 square)

Několik slovanských symbolů v podobě medailonů Several Slavic symbols in the form of medallions

Downloads
8
Likes
3
Rating
0
P
PrintablesMuad´Dib
18+

The source marked this model as adult content.

Downloads
7
Likes
3
Rating
0
P
PrintablesMuad´Dib
18+

The source marked this model as adult content.

Downloads
7
Likes
4
Rating
0
P
PrintablesDarthDeezy

Fortnite Victory Crown

Full crown, or split pieces for no-supports printing. Use settings of your choice for your desired filament. For the split_top printing (llama's head), place on build plate so mouth points up, and use max fan for the steep overhang on the…

Downloads
15,896
Likes
948
Rating
4.88
P
PrintablesHD_Creator

Miniature Vice 2.0 => 100% printed, no metal parts required

Thanks for all the valuable feedback that I got on my miniature vice: https://www.prusaprinters.org/prints/53471 This feedback has helped me to improve the design more and more, with additional upgrades and modifications that make it…

Downloads
7,322
Likes
1,198
Rating
4.97
P
PrintablesAlexT

Pokemon Coasters Vol. 2 - Gengar, Rayquaza, Pikachu, Eevee, Victini

Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) I used coin artwork from the Pokemon card…

Downloads
4,253
Likes
888
Rating
4.94
P
PrintablesLIBRE hub

Pipette tip (200 µL) sorting device

The 'Elster' Pipette Tip Sorting Device is a clever 3d printed tool designed to quickly sort and transfer 200 µL pipette tips into a storage box, eliminating the laborious task of manually sorting pipette tips. We re-share this device…

Downloads
4,101
Likes
131
Rating
5
P
Printablessdaendi

Multi-axis vice with interchangeable attachments.

The vice can be adjusted in two different angles and there are several attachments that you can easily change, if you don't like the attachments I have made you can make one yourself, with the drawing with the dimensions as a PDF in the…

Downloads
4,059
Likes
2,484
Rating
4.8
P
PrintablesPrintLab

DRAG | Assistive Writing and Drawing Device

*v2. 22nd February 2024 - screw holes in left and centre plates updated to clearance holes DRAG is an assistive device that enables users to write or draw without having to form a tight closed grip with their fingers. Simply rest your…

Downloads
3,893
Likes
718
Rating
4.77
P
Printablescmh

Metric screw measuring device - M2/2.5/3/4/5 4-50mm

Note: For a larger version that covers M3-M10 sizes up to 100mm, see my Bike Scruler . For a version of that with metal inserts for the M3-M6 sizes and magnets, see my Etsy store . Quickly sort and measure metric screws and bolts in sizes…

Downloads
3,665
Likes
661
Rating
4.96
P
PrintablesHD_Creator

Table clamp for miniature vice 2.0

Also my second version of the miniature vice became very popular right after it's release. If you don't have it yet, here are the files for the vice itself: https://www.prusaprinters.org/prints/53471 Update 23.01.22: New fully printed…

Downloads
3,543
Likes
553
Rating
4.93
P

Honda Civic Type R (EK9) Kit Card

Update 25.05.2024: Added version for 4-color multicolor print (AMS & MMU). Edit: Fixed error in 3MF-file. Summary It is a model of a Honda Civic Type R (EK9) in a kit / gift card style. Some characteristic details can be discovered.…

Downloads
3,468
Likes
639
Rating
4.91
P
PrintablesAlexsky1

Clamp on Vice- Fully 3D Printed by MuskokaResearch

Summary This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE Additional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stl Assembly (See Pictures): Adhere Frame Base Pad TPU to Frame.…

Downloads
3,395
Likes
1,269
Rating
4.83
P
Printablesbrownie2705

Victorian style Picture Frame

This is a Victorian Style Picture Frame, it was made for the PrusaPrinters 3D Contest. I thought about what kind of Frame i would like to print and something came in my mind. This Frame is a very detailed and big print with a lot of…

Downloads
3,078
Likes
717
Rating
4.93
P
PrintablesSvengineer

VICEGRIPTOR | Doesn't want to let go

Meet the VICEGRIPTOR! The strongest 3D printable clip at it's size. Zero assembly, zero supports, just functional design. You never would have thought you needed this, but now you do. The VICEGRIPTOR is a clever, print-in-place gadget…

Downloads
2,990
Likes
1,108
Rating
4.72
P
PrintablesJurij

DJI mavic 3 pro

I just took the models from the official dji website, transformed them from .glb to .stl. You can use them for making accessories or you can print them, but they won't fly ;) Have fun with your drone! Tutorial : https://vimeo.com/775340586

Downloads
2,868
Likes
47
Rating
0
P
PrintablesEmGi

Mechanical M3 Bolt/Screw Sorting Device

Video about the Designing process, The functionality and the Assembly Mechanical Bolt Sorting Device for M3 bolts/Screws 6-40mm End the struggle of manually sorting your cylinder head bolts Fully 3D Printed Operated by hand. No need for…

Downloads
2,678
Likes
1,407
Rating
4.67
P
PrintablesJurij

DJI mavic 3 drone

I just took the models from the official dji website, transformed them from .glb to .stl. You can use them for making accessories or you can print them, but they won't fly ;) Have fun with your drone! \^o^/ Tutorial :

Downloads
2,424
Likes
75
Rating
0
P
PrintablesLinusDropTips

Airlift/Payload Kit for DJI Mini 2, DJI Mini SE, and Mavic Mini

Start your own drone delivery service and deliver cargo/payloads with your DJI Mini 2 , DJI Mini SE , or Mavic Mini ! Everything is fully 3D printable without supports, you just need some string or a wire. Both the mount and the landing…

Downloads
2,338
Likes
450
Rating
4.83
P
Printablessdaendi

Tilt-lift table with fractal vice (100% 3D printed no extra parts required.)

The height of the lift table can be adjusted with the lower wheel, the angle with the middle wheel and the Fractal Vise can be tightened with the upper wheel. Print Settings & Quantity: I printed everything with a layer height of 0.2mm.…

Downloads
2,324
Likes
1,305
Rating
4.89
P
PrintablesHD_Creator

Modular miniature vice

This miniature vice with remarkable strength and modular mounting system is made for those of us, that want to do a little hobbyist work on our clean desks. It does not have any sharp edges, so the risk to scratch furniture is minimal.…

Downloads
2,312
Likes
317
Rating
4.83
P
PrintablesAviation Design

1:400 Ground Service Equipment (GSE) For 1:400 Airports And More

Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…

Downloads
2,074
Likes
48
Rating
0
P
PrintablesPatrickart.hk

Jiji & Lily (Kiki's delivery service)

Jiji & Lily (Kiki's delivery service)

Downloads
1,869
Likes
436
Rating
4.93
P
PrintablesLorenzo

Victorinox Swiss Army Knife 91 mm scales

Replacement scales for Victorinox Swiss Army knife 91 mm. In the files section there are a few different variants, in particular with and without the slot for the toothpick and tweezers and with and without the Victorinox cross logo; as…

Downloads
1,806
Likes
234
Rating
5
P

Ferrari Testarossa Kit Card (known from Miami Vice and Wolf of Wall Street)

Summary This is a model of a Ferrari Testarossa (512 TR) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated…

Downloads
1,715
Likes
407
Rating
5
P
PrintablesTonyG

Meshenger standalone communicator device for Meshtastic

You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…

Downloads
1,709
Likes
196
Rating
4.75
P

Honda Civic EF SI (EF9) Kit Card

Summary This is a model of a Honda Civic EF SI (EF9) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate exhaust :) After printing, the model can be assembled with the help of integrated…

Downloads
1,656
Likes
334
Rating
5
P
PrintablesAnniandSteve

Hunky 13 (Dummy 13 variant) Larger clavicle, shin, and thigh frames.

I love making armor and mods for the Dummy 13 but have felt that the shoulders could be wider to give it a more “Heroic” physique. I became especially inspired when I realized the hip armor could also go on the shoulder! I extended each…

Downloads
1,635
Likes
506
Rating
5
P
PrintablesUliLac

Victorinox Swiss Army Knife Pocket Clip

Here's my take on the pocket clip for Swiss Army Knives. The clip threads on to the corkscrew and holds the knife securely in your pocket. There's two versions: V1 is for regular SAK - here the clip rests on the side scale and allows a…

Downloads
1,608
Likes
173
Rating
4.92
P
PrintablesSteinamyte

Caesar Crown / Civic Crown / Lorbeerkranz / princess crown upside down

Suitable for both kids and adults - Standard should fit kids while a version for adults would need to be scaled up on the slicer. The models just fit 1:1 on a PRUSA Mini :) Or just print it in pink, turn it round and wear it as a princess…

Downloads
1,602
Likes
371
Rating
4.9
P
PrintablesFeetOffTheTable

Bench Vice - FDM optimised

CHANGELOG v1.2.1 - Carriage Bolt Edition Tweaked the Knob + Cover pieces to reduce thin walls and features that wouldn't slice properly. Still requires supports on Cover Piece 1. v1.2f - Carriage Bolt Edition turning knob added, to allow…

Downloads
1,592
Likes
804
Rating
4.5
P
PrintablesShpooople

Baroque / Victorian Picture Frame A5 (210 x 148 mm) (Updated: now with stand)

This picture frame comes with a backboard that allows for easy assembly and a snug fit. The thick version of the backboard provides more space for thicker materials or accommodates a glass or acrylic sheet over the picture. The frame is…

Downloads
1,574
Likes
335
Rating
5
P
PrintablesDavid Finn

Case for DJI MINI 2 / DJI MINI 2 SE / DJI MAVIC MINI

A small and robust case for DJI MINI 2 , DJI MINI 2 SE and DJI MAVIC MINI . It's perfect for when you just want to pack your drone in your bag or backpack. It is lightweight and protects the drone from damage and scratches. To install the…

Downloads
1,521
Likes
274
Rating
4.88

Captain Bad Advice

>> Winners << Win Original Prusa i3 MK3S+ and a hundred of other prizes! To participate in this competition, you need to fulfil two steps: Use the provided image of Captain Bad Advice to create a collage of him getting involved in amusing…

Downloads
1,492
Likes
416
Rating
5
P
PrintablesHD_Creator

Miniature vice protector caps

Since I published this miniature vice with the optional table clamp, it has become very popular. And I have started to use it myself for numerous hobby activities. If you don't have it yet, feel free to get the latest version here:…

Downloads
1,442
Likes
167
Rating
4.86
P
Printablesnyacom
18+

The source marked this model as adult content.

Downloads
1,391
Likes
90
Rating
0
P
PrintablesJurij

DJI mavic 3 classic drone

I just took the models from the official dji website, transformed them from .glb to .stl. You can use them for making accessories or you can print them, but they won't fly ;) Have fun with your drone :D Tutorial :

Downloads
1,370
Likes
28
Rating
0
P
Printablesrshelvo

fortnite victory crown

its a crown from when you win

Downloads
1,349
Likes
121
Rating
0
P
PrintablesEpicxxxx

“ex” bearing centering and rifling devices

This is it, this is what I have been focusing on for the last month. the system is done, I am not making anymore adjustments at all. There will be more mounts there will be more options but tis is the base system in its glory. Hi I'm…

Downloads
1,345
Likes
238
Rating
4.83
P
PrintablesJerryie

Honda Civic Type R kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Downloads
1,307
Likes
316
Rating
4.5
P
Printablesspiggytech

spiggytech AnkerMake M5 Hot End Service Tool Block

Current Version: v1.1 & v1.2b Small update: 4/16/2023: It's come to my attention there is a new type of hot end block that has two pegs. I've taken the liberty to do some modification to my block design and accommodated the pegs. This…

Downloads
1,270
Likes
180
Rating
4.93
P
PrintablesZCraftworks

Mavic Mini / Mini 2 Case (No Support)

This is a remix / minor mod of the excellent DJI Mini case design by rosscadguy, originally posted on Thingiverse: https://www.thingiverse.com/thing:4085056 I wanted to be able to print it without support or overhangs to keep a smooth…

Downloads
1,261
Likes
167
Rating
4.88
P
Printableswm

Vice for Dremel, Proxxon etc.

Works great, 60 mm wide. Print instructions When assembling turn nut M6L counter-clockwise.

Downloads
1,242
Likes
177
Rating
5
P
Printablesradicalreel

Easy Dremel holder for vice

Update 02.09.2023 /also fits DREMEL 7760-15 Lite thanks @ZbynekKral Update 30.10.2022 /added M5 Version https://paypal.me/radicalreel Easy and small holder for Dremel. I own a Dremel 3000… not sure if others fit too. edit: tested: Dremel…

Downloads
1,239
Likes
189
Rating
5
P
PrintablesJerryie

Honda Civic EG6 kit card

Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…

Downloads
1,230
Likes
270
Rating
5