1,052 models
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a minimalist wall mount…
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for PETGSource material: PET
Bosch Akku Halterung für 18 Volt. Perfekt um die Akkus ordentlich aufzuräumen in der Werkstatt.
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
High voltage electricity pylon (tower) suitable for G (LGB) garden railway or any other model landscape for children. Real wires can be used to provide the low-voltage power to the model landscape/railway. Gcode file contains the suitable…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This model has been designed for mounting high-voltage electrical wire or fiber optic cable reels on flatcars or as 1/87th scale industrial landscape decorations. Best results are obtained in FDM with a 0.25 mm nozzle and a 0.05 mm layer…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Case for Deek Robot Power Meter. Print settings: Material: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES (like last picture) What you need: 4x 3mm threaded insert 4x M3 screw 4x 4mm banana socket 1x switch (d=6mm) 1x 9V…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET
Printed from PETG. This is a 2 piece, cover and base voltmeter enclosure. It is connected using M3 x 18 SHCS by self tapping. This will be used on a bike mount. Print instructions PETG settings, 1.75 filament, .4 mm nozzle, Prusa MK3S+…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
When I finally assembled my Prusa i3 Mk3, I wanted to design something useful, to test the performance of the printer. Because I already bought some Hygrometers for my filaments, I decided to design a simple case for them. So this is…
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
Držák na stůl pro multimetry Voltcraft LCR4080, VC830 a podobné
Print approx. €5.76–€7.04 excl. taxPreliminary estimate for PETGSource material: PET
Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).
Print approx. €6.63–€8.10 excl. taxPreliminary estimate for one variant
This is a 12V buck boost regulator which can be mounted directly to a battery. Because it is a buck-boost converter it will always output 12V (or any voltage set by the user) even if the battery voltage is lower than 12V. It can even…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Requires MMU2S to print, Black loaded first, then White, then Red. make sure to have your printer profile set to mmu2s then import all the models into the workspace, it will ask if you want them loaded as 1 model with multicolor, click yes!
Print approx. €1.94–€2.38 excl. taxPreliminary estimate for one variant
EN: Protection of photovoltaic cables with a diameter of 6-7 mm against penetration or breakage when routed through wall edges, metal roofing, etc. I recommend printing with supports in vertical position. CZ: Ochrana fotovoltaických…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
Simple volt ampere meter to debuging voltage and ampere while doing your electronic engineering hobby. Another material needed: 1x 5mm bolts or M5x12mm bolts for the Arm (You can change this up to 18mm length) 1x 3mm bolts for DC socket…
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for PETGSource material: PET
Hi As I could not find any box that would fit my needs I had to do it my self :-) I printed PETG but you can do PLA or anything that makes sense to you. Top lid has bigger cutouts in order to easily open Lid in certain “angle” without…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
Support de lampe de remplacement pour ce TP. La pièce originale est très fragile. Version pour impression en PETG. Vous aurez besoin d'un insert M4 (ruthex) et de la vis vis molletée de l'original.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
The Bumble-Volt: Honeycomb Cell (Nikon EN-EL15 Battery Vessel) Never let a dead battery kill the shoot. The Bumble-Volt: Honeycomb Cell is a rugged, compact, and highly ergonomic battery vessel designed specifically for photographers and…
Print approx. €4.14–€5.05 excl. taxPreliminary estimate for one variant
Adapting my honeycomb storage wall filler parts to accept and position M4 nuts on the standard HSW grid to allow for the existing Sabrent Voltik wallmount to be installed on the grid. I tried using left and right nomenclature to…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This listing is a set of .STL files for 3d-printing and not a physical product. All components are 3d-printing ready (optimal orientation on the print-bed). A detailed step by step assembly instruction is included.…
Which is the coolest way for the little ones to find the path to the bathroom in the night? Of course it is this Pikachu Lamp. (The children will be also protected from the team Rocket guys) Now you can 3d print your own Pikachu lamp, I…
The design consists of 4 pieces, thinking about standard printers. Compact stand for Apple Watch (44mm) and AirPods Base to make the support more stable and join it with the iPhone part Wireless charging support for iPhone. Base to make…
The budget Parkside Team 20V batteries contain very good battery cells, so I decided to use them for some mobile applications (soldering iron, power supply, etc.) and designed this adapter to connect. Only drawback I can see: the cells do…
Rimozione supporti estremamente facile.
This model is a detailed, scale reproduction of the Y25 single-circuit 400 kV high-voltage tension pylon , an essential component of high-voltage electrical grids. The design is based on a precision 3D photogrammetry scan taken in the…
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
Here's a remix of Jolteon by 3Dprint1UPu. I've painted it, enjoy! mmu3 compatible
Two versions are available: with and without screws. The body is made up of two halves, which hold together quite well due to friction - using the screws is recommended, though. Screws required: 2× M2 hex 6 mm (or a bit shorter) (front -…
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
I remixed lilfonzy's Low-Voltage Bracket to make the arms stronger. I printed out his version and the arms were far too flimsy and broke quite easily. In this version the arms are an order of magnitude stronger and don't interfere with…
It is designed for a Voltmeter with the Sizes and i left a cut out for the cables. width: 26mm hight: deepth: 70mm Printing: Speed: 60 Material: PLA Infill: 10% Hexagon Time: 2 Hours 20 mins Print Settings Printer Brand: Creality Printer:…
High-Voltage Transmission Tower Model This meticulously crafted 1:100 scale model represents a high-voltage transmission tower, carefully designed to replicate the intricate lattice structure and technical components of real-world power…
A custom-designed enclosure for megavolt85's USB4MAPLE USB adapter for the Sega Dreamcast. You can find more info here . This build uses a Raspberry Pi RP2040 Zero and the controller connector from an extension cable. I used this…
This is a part that holds this small voltmeters: https://s.click.aliexpress.com/e/_dZBPU7C (Affiliate link) I used it to modify a lithium battery charger, you can see how to in this video: Designed in Onshape, here is the link if you want…
Designed to fit all the generic 0.28" sized panel-mount modules available online. Extra space in the case is for project wiring. Use 2 M3x12 to attach lid and #6 screws to mount the case. Print lid face down and case back down. Example…
It's a universal ball hinge peg joint compatible with 10mm revoltech joints, but it's not ratcheted. You should print: -BigDowel x1 -10mmBigDowelShortJoint x2 Category: Hobby
I designed this 9 volt battery box to go inside my son's R/C car that is used to power auxiliary LED lights. There are two versions one with a cut out for the power lead in the front and the other has a cutout on the side both versions…
Note that you may want to check out the newer, fully customizable version instead. Wall plate to guide low voltage cabling. Requires no supports when printing. I used some #6 wood screws to attach it to the wall bracket (also 3D printed:…
Are you sticking your nine-volt battery in any old drawer unprotected? Do you feel a burning sensation afterward? Experiencing unexpected discharge? Practice safe battery storage with our revolutionary new nine-volt battery protector and…
Hikoki battery wall mount suitable for multivolt batteries. The original file didn't fit the multivolt batteries. Edited in Blender to fit the multivolt batteries. The batteries won't fall out because I kept some resistance while sliding…
This is a customizable 9-volt battery holder. I have included STL files for two holders, one that holds 4 batteries and one that holds 12. The variables at top of the OpenSCAD file are documented if you want to adjust anything. I ended up…
Multimeter Halter Voltcraft VC130 IKEA Skadis
This is a remix of the GoPro Hero 9 Vertical Frame Mount that has a cutout to work with the charging pass-through battery door and Volta Grip. I am using it with a Hero 9 but it should also work with a Hero 10. This is compatible with the…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a simple wall mount for…
Design to hold the very large Ryobi 40 volt batteries on a wall panel. Large screw hole and thick base to lift it off the wall enough to be easily accessible. Printed in PETG.
I used the parametric Rugged Box from Whity to create this. I placed the logo model in the lid file for easy alignment. The logo is 0.2mm thick so it is only one layer high. the lid has an indentation for the Logo. If you don't have a…
milwaukee 12 volt 4-6 ampere battery replacement parts
This battery holder is for a Metabo HPT Multivolt 18v / 36v battery. It can be mounted on any flat surface using the screws. This item can be printed vertically (on the side without text) without supports. You may want to increase your…
This model is for a open-back outlet box or mounting bracket designed for low-voltage devices in an existing wall such as Ethernet, TV, audio or telephone. This box should not be used for 120 volt or 240 volt outlets. This box clamps to…
This is a basic file I designed to hold 9 volt batteries. The reason I designed it was to make sure that the battery contacts did not short against each other in the drawer. It holds 14 batteries and should fit in most drawers because it…
These voltage regulators come in several variations. Some have the polarity in the opposite orientation, some don't have a display, and some have different capacitors or terminals that effect the height. The model I based this on modifies…
Package LM2596S DC-DC step-down voltage regulator Adjustable LM2596S DC-DC Buck Converter Step Down Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display USB Worx HUE without writing Can be…
I bought an USB variable voltage regulator from Aliexpress (source: https://www.aliexpress.com/item/33008113832.html ) and designed a case for it using Autodesk Fusion 360 Print instructions Category: Electronics Print Settings Printer…
If you're into electronics, this keychain's for you! It is designed to be printed in two colors with a manual filament change during the print, so you don't need a fancy multi-material printer. Printer Settings Layer Height - 0.2mm works…
This is a 3D printed inverter mod centered around integrating a 1,000 watt pure sign wave inverter into the gen-1 Chevy Volt and does so through a custom rear hatch faceplate that adds an interface for you to remotely wire-up a hidden…
UPDATE Nov. 12, 2025 : Per the suggestion of “Troy” in the comments, I have added versions with notches (center marks) - these are the “02” version files. UPDATE Nov. 14, 2025 : To make the “center mark” versions easier to use with a…
1x4 holder for a Klein voltage tester
Finally, keeping your batteries and volt meter in the same place cannot be any simpler. This unit employs a very simple, mini, digital, volt meter. Batteries are tested by squeezing the front 3 batteries against the internal contacts by…
My personal issue with my XL printer started a few weeks ago. This is my first summer with my XL and I am finding out that my garage is just too hot for the XL to work. When the temp gets up to 90ish, the printer has one of the sensors…
For an electronics project, I picked up some small and inexpensive voltage meters (VM). They include tiny mounting tabs on either side which take very small screws and leave the meter exposed and vulnerable to damage. This two-piece…
The leafblower got noticeable better for use on stones under the grass after a long winter. Updated with better overhang and locking so it won't blow off. Mounted on mine and testet with no tape, did not fall off. Updated 1mm tighter lock…
This is my build of the Wicked Device Angular Clock , an Arduino-based PCB which drives three voltmeters to display hours, minutes, and seconds. It uses the square “quadrant” style of panel meter, and each meter is in its own case,…
Drains the water and flowting dirt of your low inclined Photovoltaik modules. Choose according to the hight of your pv- modules 30mm/35mm/40mm. Test and pictures will follow. PETG or ASA is recomended because of the UV exposure.
This hardware will allow for the MASTERFORCE 20-volt battery mounting capabilities to a wall or inside a toolbox etc. Prusa Mk4 Input Shaper 5.0.0
This mini-voltmeter case features a 7-segment LED display with segment sizes approximately 10 x 23 mm. The overall dimensions, including the board, are 11 x 33 mm. Mini-Voltmeter Case Display : 7-segment LED Segment Size : Approximately…
Made for Chevrolet Volt / Opel Ampera and others 59mm outer diameter. All parts are easily printable without supports. “mask” models are supposed to help with spraypainting logos. KSL 421180
12 Volt Switch Box Small wall mounted box fits 2 -20mm round 12V switches for LED's fans etc. I used 4 -M4x10 screws to cut their own threads. I used these cheap Amazon switches:…
I am seriously bothered from lacking voltmeters in blasters, especially in blasters with low capacity batteries like the nightingale. I couldnt find a file for a frame and didnt want to cut the shell so i modeled a new battery door with a…
Cubert is my case for the popular ATS Mini SI4732 Pocket Radio. This inexpensive radio supports many bands and is high regarded in the radio community. More information on the radio itself can be found in links at the bottom of this…
Designed to fit a voltage converter model number: 4KX 18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here…
2-Gang Electrical Bracket for Drywall - @claylinco generously made some variants and mods to the single gang file. There are now 2, 3 & 4 gang brackets! “I've modified it to have center markers and holes to mark the cut line on the wall.”…
Santa, Elf and Reindeer ornaments! I modeled these characters in Blender 2.81 based on my experience as a sculptor and caricature artist. I am a newbie to Blender, so after three attempts I am happy with how adorable they turned out!…
I'm endeavoring to print the entire Gen 1 Pokedex in the low-poly style popularized by Flowalistik, but the majority of Pokemon still have yet to be designed! You can follow my progress on YouTube or Instagram, @zembacraftworks or…
This is a battery wall mount for the 10.8 volt batteries from Makita. Simply screw with two or one screw to a board or directly to the wall.
Printable 3D model. AA - AAA Batteries case. Voltorb Pokemon inspiration. STL files.
Summary Keep your photovoltaic wiring neat, secure, and professional with these simple snap-on cable clips. Designed specifically for solar panel installations, these organizers help manage MC4-compatible solar cables and prevent loose…
This is a vented case for a "Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module" found on Amazon . Sold by many sellers and should work with any of them. Both the top and bottom of the case have vents cut in…
Remixed from here: www.thingiverse.com/thing:4779643 A simple remix to use 9 volt battery in your Baofeng UV5r. You will need a 9v battery, a 9v battery connector, and to solder some leads and pads for the top of the case to connect to…
I carry 9 volt batteries in my guitar accessories case, and I need something to protect them from shorting out on other metal items.
RobotDyn LM2596 Step-Down module case. The converter has a button, this isn't implemented in this design yet. This is a remix from the following item: https://www.thingiverse.com/thing:4056842 It should fit this LM2596 from RobotDyn but…
Add it to your creactions.
Pequeño llavero del Pokémon Voltorb para imprimir en 3 colores, con alturas de relieve diferentes para el cambio de filamento. Especificaciones Para imprimir el llavero y que los cambios de color se hagan correctamente la altura de capa…
This is a simple case for the " Onyehn 2pcs DC 12V-36V Voltage Protection Module Digital Low Voltage Protector Disconnect Switch Over Discharge Protection Module ". Print at 0.15mm layer height and 0.35mm layer width (important for letter…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
modeled from scratch, but highly inspired by https://www.printables.com/model/361590-multimeter-halter-voltcraft-ikea-skadis - so all credits to him. Since this is my first upload, I hope the category is the correct one. I printed the…
INA219 sensor model. The textured Solidworks model is in the .ZIP folder. Lower detail STEP files are also available. The Solidworks model has two configurations for the with/without pin header. The model also contains electrical…
Original box is some kind of genious. I cannot work with F3D, so I used TinkerCad to fit this nice box to my Multimeter Voltcraft No91. I added the Voltcraft logo and printed it on my MK3s with MMU2s. You can also print it without MMU,…
Print, and have a drink on this AC/DC three piece coaster (if not using the .3mf file) featuring the artwork from the album High Voltage - Rock & Roll. It includes a coaster that is 105mm in diameter. It's printed on Bambulab X1C (AMS…
This enclosure allows you to attach a voltage and current meter to a DIN rail. Although I have printed my own in PLA I suggest that it be printed on PETG, if possible, because PETG is more flexible and makes it easier to place on the rail…
Printed in PA6 GF on a Bambulab P1S printer. The adapted model is designed to be mounted inside an enclosure with the top half of the battery sticking out. I adapted it to sit inside of a rugged briefcase for a cyberdeck project which…
Custom designed to replace a broken or misplaced Flaming Voltron 1981 diecast toy Sword. But Should work for any voltron lion set from the era. Sword exact size is undetermined (if you have one tell me) judging from photos I believe it's…
This is a remix of the "1st Gen Chevy Volt Key Fob Cover" by Kemmotar. The purpose of this cover is to avoid accidental keypresses in the pocket, particularly accidentally opening all windows which is no fun at all in a rainstorm. I…
Replacement of GM 42482233 25913048 trunk privacy cloth hook that fits various cars. For: Chevrolet Volt Opel Ampera Holden Volt Vauxhall Ampera Chevrolet Bolt
Mounting plate for the common XY-3606 5V Voltage Regulator which is otherwise missing mounting holes. Print Settings Printer: Crealty Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 40% Filament: Extrudr PLA blue Category:…
I received a DeWalt XR Flexvolt battery from a client to repair its casing. The problem was that there wasn’t much left of it — the housing was in pieces and many components were missing. Because of that, I had to redesign most of it from…
Villa volta house from the Efteling (dutch theme park) 1
Fully print in place with no support, infill or brim required Easily scalable in size, scale as low as 77 -80% or up in size as large as you want Recommend only 0% infill and Arachne walls enabled for scaled down prints (enabled by…
This is a case for a mini voltage display. It fits Amazon product # B079N98PY4 described as: HiLetgo 5pcs Voltage Meter 3 Wire 0.36" DC 0~30V Digital Voltmeter Gauge Tester Red LED Display Panel Mount Car Motorcycle Battery Monitor Led…
This is a simple variable capacitor. the main idea was to make it extremely easy to print and not require to cut metal plates. i was inspired by another very clever design that use a rotating cylinder. this has a gap of around 10mm…
![[HW-132 Case] - USB Step Up Power Supply Module / Voltage Regulator](https://media.printables.com/media/prints/130325/images/1249148_bf9b545b-111e-4fea-89a7-91518df96a1e/foto2.jpg)
