153 models
Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).
Print approx. €6.63–€8.10 excl. taxPreliminary estimate for one variant
It is designed for a Voltmeter with the Sizes and i left a cut out for the cables. width: 26mm hight: deepth: 70mm Printing: Speed: 60 Material: PLA Infill: 10% Hexagon Time: 2 Hours 20 mins Print Settings Printer Brand: Creality Printer:…
This is a part that holds this small voltmeters: https://s.click.aliexpress.com/e/_dZBPU7C (Affiliate link) I used it to modify a lithium battery charger, you can see how to in this video: Designed in Onshape, here is the link if you want…
Designed to fit all the generic 0.28" sized panel-mount modules available online. Extra space in the case is for project wiring. Use 2 M3x12 to attach lid and #6 screws to mount the case. Print lid face down and case back down. Example…
For an electronics project, I picked up some small and inexpensive voltage meters (VM). They include tiny mounting tabs on either side which take very small screws and leave the meter exposed and vulnerable to damage. This two-piece…
This is my build of the Wicked Device Angular Clock , an Arduino-based PCB which drives three voltmeters to display hours, minutes, and seconds. It uses the square “quadrant” style of panel meter, and each meter is in its own case,…
This mini-voltmeter case features a 7-segment LED display with segment sizes approximately 10 x 23 mm. The overall dimensions, including the board, are 11 x 33 mm. Mini-Voltmeter Case Display : 7-segment LED Segment Size : Approximately…
I am seriously bothered from lacking voltmeters in blasters, especially in blasters with low capacity batteries like the nightingale. I couldnt find a file for a frame and didnt want to cut the shell so i modeled a new battery door with a…
RobotDyn LM2596 Step-Down module case. The converter has a button, this isn't implemented in this design yet. This is a remix from the following item: https://www.thingiverse.com/thing:4056842 It should fit this LM2596 from RobotDyn but…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
This is a case for a mini voltage display. It fits Amazon product # B079N98PY4 described as: HiLetgo 5pcs Voltage Meter 3 Wire 0.36" DC 0~30V Digital Voltmeter Gauge Tester Red LED Display Panel Mount Car Motorcycle Battery Monitor Led…
Case for DSN-VC288 voltmeter-ampere meter. The hole is for the DC Power Connector 3-Pin 5.5 x 2.1mm (https://a.aliexpress.com/_EJAbB9W) 0.2 mm
I made this socket for adding a voltmeter and USB charger for my Corsa C. It snaps into place. The voltmeter is one of those chinese ones that also includes 2 fast charging usb sockets and I just connected it in paralell with the lighter.…
Prints with no supports, pushes into plugs.
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
For Mini LCD C 2.4-30V Car LED Panel 3-Digital Display Voltmeter Housing for cable mounting
This is a common, cheap, item on eBay or AliExpress thats a generic facia for 12v plugs and USB. i wanted this item put onto a wooden box to go in my shed to keep a monitor on my leisure battery & the solar panel that charges it plugs…
This enclosure for those common cheap mini voltmeters lets you clip them into the power rail of your breadboard. Step 1: Solder two wires to the board (combine red+yellow to a single wire, this way you don't need a separate power line,…
A simple easy to print voltmeter support for your dash no drilling no fuss just some assembly double sided adhesive tape hole is 30mm dimensions are: W x H x D (width, height, deepth) 50mm x 70mm x 50mm voltmeter:…
An S-360-12 PSU cover with voltmeter, switch and xt60 plugs ; with removable access cover. Uses M3 screws and heat-serts for the cover. Note: I designed this to fit an older voltmeter I had that has the two mounting tabs offset towards…
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
A neat enclosure for digital voltmeters, hole size 45 x 27mm. Keeps the display in a nice angle, uses 4 M3 brass inserts and 4 M3 bolts.
This is a voltmeter "DC Power Detector", holder mount on DIN rail - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które posiadam Zapraszam…
Description : This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much voltage falls on the LED at 10mA current?" or "is this an IR LED or what?" by…
Remixed to panel mount to use with my battery pack / solar generator Category: Electronics
I have couple of inexpensive voltmeters located in my “work” areas. One is a current model Harbor Freight multimeter and has an eyelet to hang on a tool organizer or pegboard hook. The other is for a Sunpro (Actron) CP7674 multimeter that…
Requires M3 45mm long bolts to mount to the super simple slide on only DIN rail adapter. Both parts print with no supports. Print the DIN rail on its side, and the case face up. A FreeCAD file has been provided for the DIN rail adapter.…
an enclosure for the cheap LED Volt-/Amperemeter. you need: Volt-/Amperemeter 3 Banana-Jacks 1 7x7 on/off switch (optional) 1 JST-Connector (optional) circuit board for easy switch and connector mounting wiring: OpenScad file included, so…
This is a simple voltmeter housing. These voltmeters are widely available on AliExpress or eBay. Their display size is typically 2.4cm x 1.4 cm (0.36 inch). The mounting holes are 28mm apart. You will need either 2 small screws or some…
I was looking for an enclosure/holder for a voltmeter and temperature display, but couldn't find anything existing that was what I was looking for. I built these to screw onto the side of my printer enclosure (Stuva cabinet from IKEA). To…
I appologize. This is a remix but I cannot find the printout that inspired me. Sorry for that
This is a simple mounting frame designed to install a 0.28″ mini digital voltmeter neatly into a case or enclosure. It provides a clean and secure fit and makes it easier to mount the display without glue or improvised solutions. The…
You can use it from bottom or top down. The Ampmeter will fit from both sides. Thickness is 20 mm, the frame is not closed. You are able to remove the ampmeter in both directions by rotating it 90° (very comfortable if the cables are…
This small digital voltmeter is very low cost and often used in Arduino projects. This model will help with the design of the 3D box hole for the voltmeter display. EDA tool: OpenSCAD Print Settings Printer: Prusa Mini Rafts: Doesn't…
Custom Box for Digital Voltmeter & Ammeter Fast and easy print to add a box to your cheap digital voltmeter and ammeter. For my setup, I used: 2 x M3 screws (6mm or 8mm) 5 x 4mm banana plugs 5 x M4 Binding Post (3 red and 2 black) 20 AWG…
Tiny Voltmeter Case I designed this case to suit the miniature LED voltmeter displays readily available on Amazon and Chinese sites. This is the description from Amazon. 0.28 Inch Mini Digital Voltmeter with 7 Segment LED Display 2.5V -…
Storage box for a voltmeter, for convenient placement on a shelf. Attach the test lead holder using super glue.
Printed from PETG. This is a 2 piece, cover and base voltmeter enclosure. It is connected using M3 x 18 SHCS by self tapping. This will be used on a bike mount. Print instructions PETG settings, 1.75 filament, .4 mm nozzle, Prusa MK3S+…
This model for analog voltmeter type 91C4 has a 5.2 mm connector also has a button to change the range or it can be used to turn the device on or off in order to change the range I used two resistors
Here is a box for a DC boost/step-up (or even a step-down buck-converter) based on the XL6019 circuit that is 50x28mm in size. This has been designed to house the converter and a standard DC jack socket to fit on one end: repurpose those…
1/10 scale coleman voltmeter cooler. voltmeter slot is 25.5x15.5mm holes are 33.5mm apart. Slot in the back is big enough for a standard JST plug. link to waterproof voltmeter :…
This is a flush mount Voltmeter 4in1 AC 100A, this is a triple holder for 3 phases - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich urządzeń, które…
Dashboard for powerbutton, voltmeter & usb ports. For Vfr 800 non HISS key bikes.
See https://www.amazon.com/dp/B00YALV0NG/ref=sspa_dk_detail_4
Find out everything you need to know about the XL6009 housing on my blog: https://nerd-corner.com/diy-powerbank-with-voltage-regulator-and-voltmeter/ https://nerd-corner.com/de/verbesserter-lm2587s-spannungswandler-step-up-modul-dc-dc/
Passend für: https://www.printables.com/de/model/67118-ts100-power-adapter-for-makita-batteries PETG; 0,15 mm Schichtabstand; 3 Wandstärken und 20% infill. 4 x Gewindebuchsen M4 x 8,1 x 6,3. Die Bohrung für die Gewindebuchsen hat 5,2 mm…
I found most of the models out there didn't fit the width of my Fluke 87 meter so I made my own. I decided to use standard ½" metal J-hooks to attach to the pegboard as I didn't want the printed ones to break off and drop my meter. This…
A replacement case / sleeve for small digital DC voltmeter ammeter display. I have one of these small digital panel mount displays that only comes in black plastic. I designed a replacement case / sleeve for it so it could be printed in…
Made this for my Toyota MR2 (Toyota MRS / Toyota MR2 Spyder) because I don't want to use the typical cigarrette adapters because comes too hot and sometimes doesn't make good connection. With this you can use an excelent buck converter…
Simple case that houses a multimeter (display) and a power switch, the case can be screwed to a surface. CAD files included, feel free to reuse. Components used: Multimeter https://www.amazon.de/gp/product/B08NTMX62K Powerswitch:…
28mm and 36mm Voltmeter Bezels
Its an holder for an USB Charger with an integrated voltmeter and a KCD1 switch (round version). You need two M5x25mm Screws. USB-Charger:…
I need a enclosure for my mini voltmeter. So i design it in Fusion 360 and print it on my Creality Ender 3.
Clock was inspired by the following post, which was also used as instructions for the whole build. I simply created the case for it that I used, and am sharing it in case others would also like to use it. Original Post:…
Case for the well-known Meanwell LRS-50-5 PSU : https://www.meanwell.com/webapp/product/search.aspx?prod=LRS-50 Design specificities : - Case Front panel : IEC320 C14 inlet power socket with fuse and switch - Case Rear panel :…
case for display with voltmeter
Simple case for a voltmeter and test probes.
Housing for a cheap volt-/amperemeter from aliexpress for fischertechnik. Compare the images, there are a couple of similar variants. Note that the ammeter's precision is only 10mA and it will start measuring amperage only from 20mA…
This is a rear cover for generic cheap volt meter modules sized 22 x 10 mm, to shield the open electronics from touch or short circuit. The frame module is optional. If used with a cutout of a front plate, the rear cover can be used to…
I reuse voltmeter, translucent cover and metal ring from Aliexpress electric bike voltmeter (such as this https://www.aliexpress.com/item/4000706480827.html?spm=a2g0s.9042311.0.0.c86c4c4dmHJDaG ) because i find it too bulky. Print…
Support for 4 voltmeters with this holder you can put 4 voltmeters on a DIN rail You need: -4 M3x14mm or 12mm screws -4 M3 x 4.6 brass inserts, the voltmeters can be fixed with M2 x 5mm screws I used these voltmeters:…
Stand for 4 micro lcd with 4 hole for cable,and 8 holes for screw I include a cover Category: Electronics
Mini portable voltmeter for testing car and motorcycle battery voltage. built with SAE connector for an easy plug and play operation. BOM: mini voltmeter battery SAE cable SAE connector (for voltmeter)
Ein einfacher Container für den Zangenamperemeter Testboy TV 216. Zusätzlich habe ich 2 Halter für die Messspitzen mit der Skadis Aufnahme hinzugefügt. Die Halter für die Messspitzen haben eine Aufnahme von 11 mm, diese sollten auch für…
Voltmeter box, but can hold anything. Resize dimensions to fit anything you would need. Can be printed without supports and raft. Infill and wall thickness as needed.
Intended for panel voltmeter, e.g. https://www.aliexpress.com/item/1005004590759153.html?spm=a2g0o.productlist.main.3.4e3b27d6DYWB80&algo_pvid=cce4c071-e715-40ff-af15-802a6e5e556e Cover encloses step-down power supply needed for voltages…
Halterung für Voltmeter. Passend für VW Passat 35i und Corrado. Unteres Ablagefach in der Mittelkonsole
Notes: don't print the reference combined file uses M3 screw and nut to tighten uses 2 male and 2 female XT90 sparplug look at combined parts for reference use fitting screws to fasten the bracket use shunt that is correct for your…
made a tiny case for LCD Voltmeter features a digital Display as shown in pictures overall dimensions are: 40mm x 18mm x 13mm (width x height x depth) . Designed in Germany - Thanks Freecad
This was one of my first 3d designed items. I don't remember what the print settings were but it was printed in PLA Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament:…
This model was made so that the information from the inverter was more complete. There are inverters without a voltmeter indicator. Also, if there is one, it can be displayed as an element of room decor and at the same time monitor the…
Mini voltmeter 4-30 V DC. I printed with a 0.25mm nozzle but it is probably possible to print with a 0.4mm nozzle. It is recommended to use glue for assembly. Dimensions of the module: 24 x 10mm. I ordered it from Temu but I think it is…
The electric part comes from a throttle gas or similar. The original was in no way waterproof. Put the electrics behind 2 layers of clear heatsink. The top glass is cut from a broken sun glasses. Can be ziptied. Printed in PETG.
Square Analog Voltmeter Frame This 3D-printed frame is designed to securely and elegantly house a square analog voltmeter. Crafted with precision, the frame ensures a snug fit, protecting the voltmeter while providing a clean,…
You need: DSN-DVM-368 Voltmeter Module, see also here . Buy at many places, e.g. here 12V car connector two 5mm cube magnets 60cm of any 2-wires cable Easy PETG print, no supports, layer 0.2mm. (PLA is likely fine as well.) With key ON…
Ender 3 v2 Feet Riser - 38mm/45mm total clearance - REMIX! by pakkko English: I made a remix of the really simple Ender 3 V2 45mm Feet Riser here. A mini voltmeter was inserted into one foot. With this mini voltmeter you can control the…
a simple design to hold a cheapo voltmeter inside the jam door, you can wire the volt meter to turn on when you open the jam door like I have or you can pick a different switch to use. all you need to do is cut a small opening in the wire…
Voltmeter to alligator clip adapter. You will need thin conductor wire (I used jewelry wire), hot glue, a soldering iron, alligator clips, and wire. Suitable for multimeters with a 2mm probe tip. Smooth fit with 2 turns of conductor wire…
Voltmeter-ampere meter case charger (DSN-VC288)
I got some of these cheap voltmeters: https://www.gearbest.com/development-boards/pp_134717.html?wid=37 and I made an enclosure for them. I saw that other meters on the website (…
I added a pi for octoprint and need a way to power it. This was my first 3d so keep that in mind it seemed to work
I recently finished a big Dart Zone Pro Mk3 mod. During the build, I wired in a voltmeter from Foam Pro Shop and wanted to mount it where the insert is to the right of the battery tray. Scope7Tango on Thingiverse had already done a great…
Holder for voltmeter. Top cover cut from clear plastic - old cd rom cover. Uses the mini voltmeter. Printed in abs.
This is my first voltmeter frame. More sizes will be coming soon.
I had one project in which I required external specific power supply with dual outputs. I took two STEP-DOWN LM2596 + voltmeter modules (Output 1.25 – 37V, Input 4-40 V) and create this model. I thought that most of you my friends will…
This is for e-bay voltmeter that I used few times. This holder is for e-bike tube, i used VHB tape. https://www.ebay.com/itm/225614699660?var=524737201459 release tab holes
Voltmeter: https://www.aliexpress.com/item/1005005626548556.html? Cable: https://www.aliexpress.com/item/1005005416426422.html? Switch: ?
Build you own DIY Bluetooth combined voltmeter and ammeter. It communicates via Bluetooth with the phyphox app - a free Physics app from RWTH Aachen University. The device is based around a ESP32 microcontroller board and uses an INA219…
You can use purely cosmetic controller fan exhaust grill to mount a digital voltmeter, sexy and functional.
This is a housing for an old voltmeter with a diameter of about 54mm. You can find such an old voltmeter on ebay or other marketplace. You need additional the following parts: - 6x M3 threaded inserts - 6x flat head screw M3 x 8mm or 10mm…
Closed holes on one side. Made cutout for wire connections. Added "V" for voltage. Category: Electronics
Allow me to introduce you " Voltage Tester 1.5-40V 1.5A - Case STEP-DOWN LM2596 + voltmeter ". I assembled this project because, had a lot of schemes with adjustable voltage. I needed to know exact voltage of each and decide to use LM2596…
A RPI Pico and/or Arduino and Python based ecosystem that will make a virtual voltmeter appear on screen that updates real time and can be used by streamers who wish to show voltages on the screen as well. Best Suited for hardware…
Voltmeter for monitoring PSU voltage. Based on using these simple voltage displays (https://www.amazon.com/gp/product/B08RYPRZFF/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Description : See: https://github.com/boda-akos/STM32-Voltmeter-Data-Logger-Calculator This instrument has some useful functions for Arduino users. Besides being a voltmeter with data logging, it could answer questions like "how much…
Cut flanges from module. Jacks and voltmeter wired simply parallel. Glue the 3D halves together when wiring ready. Isolate bottom with a carton sheet.
Digitální voltmetr, ampérmetr, měřič výkonu 79,5*43
Gehäuse für USB Tester siehe. https://de.aliexpress.com/item/1005002371533933.html?skuId=12000020382751022&pdp_ext_f=%7B Deckel und Gehäuse haben Nasen und passen stramm zusammen. Deckel kann nach Bedarf beschriftet werden. Gedruckt Mit…
