Search results: waste

Sort order

1,026 models

P
PrintablesLiberty4Ever

Elegoo Neptune 4 / 4 Pro Waste Bin

The Neptune 4 Waste bin is a rectangular waste container that snaps onto the left side of the Elegoo Neptune 4 or Neptune 4 Pro. It may fit other printers with 40 mm square extrusion frames. It's surprisingly useful to have a little bin…

Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant

Downloads
1,605
Likes
263
Rating
4.92
P
PrintablesDrAl

Track Saw Waste-Side Kerf Jigs

Waste side jigs for track saws / guide rail saws / plunge saws. These are used when you want/need to have your guide rail on the waste side of the line. If you put the splinter guard up to the line on your workpiece, your workpiece will…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,019
Likes
176
Rating
4.86
P
PrintablesMikyleee

Bambu Lab - Poop Bucket, Filament Waste Bin - X1 and X1 Carbon

UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…

Downloads
15,389
Likes
781
Rating
4.77
P
PrintablesMikeyLew32

Elegoo Centauri Carbon Poop Waste Drawer

An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…

Downloads
12,779
Likes
1,551
Rating
4.89
P
Printablesきよさん

AD5X Poopbox – Easy Waste Collection Tray for Your 3D Printer

Clean up your 3D printer workspace with this handy poop bin designed specifically for the Flashforge AD5X. This simple tray catches filament scraps and purge lines to keep your print area tidy. just print and place it underneath your…

Downloads
6,529
Likes
263
Rating
5
P
PrintablesKevin Wells

Creality K2 Plus Poop Chute & Waste Bin

This is a poop chute for the K2 Plus that I've designed. It attaches with the two screws on either side of the waste chute. There's also an additional retainer bracket that utilizes (2) of the rear panel screws and it supports the end of…

Downloads
4,981
Likes
273
Rating
5
P
PrintablesArtificalSUN

QIDI Q2 minimalistic purge/waste bin (poop box)

Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…

Downloads
4,390
Likes
274
Rating
5
P
PrintablesJAV3D

Mülltonne, Biotonne, Restmüll 80l Maßstab 1:6, 1:12, LEGO, Spurweite H0, Trashbin, Trash can, Garbage bin, Waste container, Rubbish bin, Dumpster, Refuse bin, Garbage, receptacle, Litter bin, Dustbin, Waste bin

Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…

Downloads
3,995
Likes
564
Rating
4.83
P
PrintablesAdrianM.

Cat Food Squeezer – Zero Waste, Clean & Easy (3D Printable)

Tired of wasting wet cat food left inside sachets? Cat Food Squeezer is a simple, practical, and fully 3D printable tool designed to help you extract 100% of the food from cat food pouches — quickly, cleanly, and without messy hands. A…

Downloads
3,974
Likes
588
Rating
4.83
P
PrintablesSlaw

Purge / Poop / Waste Bin / Box for Qidi Q2

This waste box brings rolls the purge material to the front (as original model) but also added a drawer to make simple the emptying of the box without moving the whole box. It can be important, if you do not have much space and you want…

Downloads
3,374
Likes
229
Rating
4.93
P
PrintablesLMaker

Multipurpose waste container

This is a waste container I design to use for multiple propouses like bambulab X1/P1 waste, pencil holder, store boxes… and other propouse you can give it. In the following steps, I'll explain what you need to do to assemble the…

Downloads
3,325
Likes
1,414
Rating
5
P
PrintablesHologos

Reduce Purge Waste with Bambu Lab AMS

Hello fellow Bambu Lab owners. Do you hate all that waste that the AMS units generates? Me too. That's why I made this guide how to reduce / tune / calibrate / optimize the purge waste. If you find this guide helpful, I'd be glad if you…

Downloads
3,045
Likes
1,014
Rating
5
P
PrintablesZeroDotCMD

Kobra X Filament Deflector and Waste Bin

Anycubic Kobra X filament deflector and waste bin. The filament deflector mounts directly to the back of the filament extractor and is secured with screws. The filament waste bin is designed to fit snugly next to the Kobra X. It sits…

Downloads
2,898
Likes
145
Rating
4.89
P

Waste Bin Kit Card - 1:24 scale garage diorama accessories

Summary This is a 1:24 scale model of a waste bin / trash can in a kit card style. Versions The complete sets are available in a 3MF file for a one-color print. There are 3MF-files with predefined colors intended for users of AMS or MMU.…

Downloads
2,687
Likes
555
Rating
4.8
P
PrintablesHami

Filament waste container, poop basket / Filament Abfallbehälter

There are two versions with different hole sizes. The smaller hole size is easier for printing. No supports are required for either version. Suitable for my Anycubic Kobra 3 filament waste diverter…

Downloads
2,280
Likes
162
Rating
5
P
PrintablesChadam

Bambu Lab X1 Carbon Waste Chute

My existing small bin for the rear of my X1 Carbon would fill up and either overflow or back up into the printer. What I wanted is a waste chute to move all purge material to the front of the printer that worked with the anti-vibration…

Downloads
2,235
Likes
43
Rating
0
P
PrintablesJulien Mairy

Purge Waste Ramp and Collection Bin – Elegoo Centauri Carbon 2

Purge Waste Ramp and Collection Bin – Elegoo Centauri Carbon 2 This model consists of a guiding ramp and a collection bin , designed to channel and collect purge waste from the Elegoo Centauri Carbon 2 . The ramp guides purge material…

Downloads
2,193
Likes
208
Rating
5
P
PrintablesiKenny

Bambu Lab X1C Wastebin

He Catch every Poo from your Bambu. You must never more grabe behind your printer.

Downloads
2,167
Likes
292
Rating
5
P
PrintablesJeremy Sapp

Centauri Carbon 2 Waste System (CC2 Poop Chute)

A simple back hanging waste system for the Centauri Carbon 2. It uses the existing screws to secure it to the machine. It slides off and on easily, and holds a large amount of poop for those long jobs. I could've cut down on the amount of…

Downloads
2,126
Likes
127
Rating
5
P
PrintablesFH

WBH - Waste Bag Holder

I came across an idea about workflow optimizations in a YouTube video, which made me reflect on the mess that often accumulates around my 3D printers—purge lines, skirts, and the occasional failed first layer every few months. I tried…

Downloads
2,097
Likes
909
Rating
5
P
PrintablesParagon

Pojemnik Na Kupki / Filament Waste Bin Anycubic Kobra S1 Combo

Pojemnik na "kupki", jedna część mocowana na ścianie tylnej, druga część doczepiana na magnesie. Projekt w formacie STP tutaj, pozwalam na modyfikację, proszę tylko podlinkować źródło!…

Downloads
2,042
Likes
223
Rating
5
P
PrintablesSergej Riedel

QIDI Plus 4 Filament waste container

Hierbei handelt es sich um einen zweiteiligen Filamentabfallbehälter, bestehend aus einer Rutsche und dem Behälter. Die Rutsche setzt sich aus zwei Teilen zusammen: dem Hauptkörper und dem Deckel, die nach dem Druck einfach…

Downloads
1,972
Likes
165
Rating
5
P
PrintablesAndrey Plotkin

Anycubic Kobra S1 – Large Volume Filament Waste / Purge / Poop Bucket

A custom-designed solution for collecting purged filament from the Anycubic Kobra S1. The mount attaches to the printer using the two existing screws—no modifications or extra hardware required. The bucket then slides into the mount and…

Downloads
1,740
Likes
100
Rating
5
P
Printables70r71

0-waste a multipurpose robot

0-waste: a multipurpose robot This kind of remotely controlled robot is highly appreciated for its easy of use, low mantenaince and cost effectiveness. Although not particularly advanced, it is often preferred to more sophisticated…

Downloads
1,725
Likes
672
Rating
4.78
P
PrintablesRJCDesigns

Anycubic Kobra S1 Poop Chute and waste bin- Vented

A much needed poop chute for the Anycubic Kobra S1 Combo. Vented at the outlet and chassis fan to avoid blockages. Screws into the machine with the original screws. With removable collection bin.

Downloads
1,658
Likes
119
Rating
4.86
P
PrintablesDesignCraft

Bambu Lab Waste Chute Bucket for Purged Filament Poop

A bucket to catch purged filament from the waste chute of Bambu Lab printers such as the X1 Carbon (X1C), P1S, and P1P. Features: Large volume to collect purged filament Low material usage compared to similar designs Less than 2 hour…

Downloads
1,468
Likes
39
Rating
5
P
Printableswanderyr

Improved Q2 Poop Bin - stable with no tools or screws (purge/waste)

A purge waste bin. It doesn't vibrate loose, it doesn't require tools or printer mods, and it doesn't block vent slots. It's wider than it looks in the pictures, and, like a certain police box, it's bigger on the inside! What makes this…

Downloads
1,465
Likes
46
Rating
4.75
P
PrintablesGLeZz

Snacks serving bowl with waste compartment

Snacks serving bowl with waste compartment Print instructions Straight forward print, no supports needed. Print in two parts. Can be scaled.

Downloads
1,465
Likes
470
Rating
4.91
P
Printableseray3dart

"WASTED" GTAV

"Wasted" text from GTAV includes a frame (black) and the text to fit in (red) two piece. I made space for the letters in the frame part, you need to use glue for assembly.

Downloads
1,446
Likes
721
Rating
4.94
P
PrintablesPeter Martin

AnkerMake M5C waste box V2

Addition 3 Nov 2023 : Redesign : File Name AnkerMake M5C Bin V2 Added a Taller wall to prevent bits flying over the edge. increased width by 5mm to go under the build plate a bit more. changed rear design to better fit the AnkerMake Mast.…

Downloads
1,436
Likes
161
Rating
5
P
PrintablesHD_Creator

Mini garbage bin for 3D printing waste (vase and normal mode)

Basics about this design: The design of this elegant octagon bin was actually done in a few minutes. Only after I had printed it from PETG, I realized that when printed in vase mode, the slight shrinking of PETG gives it an additional…

Downloads
1,396
Likes
150
Rating
4.89
P
PrintablesJéjé l'ingé

GTA WASTED LAMP - Control Remote & App

VIDEO TUTORIAL: Buy my led strip : https://jeje-linge.fr/pages/gta-wasted-lamp

Downloads
1,350
Likes
818
Rating
4.82
P
PrintablesYoupak

Bambu Lab X1C P1P Spoiler / Chamber Waste recovery for debris removal

A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…

Downloads
1,208
Likes
155
Rating
4.5
P
PrintablesAdminAcct0013

Litter-Robot 4 (LR4) Litter Waste Optimizer

I created this to help distribute the litter drops to better take up the width of the LR4 waste container. In my particular situation, I have 2 cats, an LR4 and an LR2. The LR4 is used the most (80-90%). This print helps the LR4 last the…

Downloads
1,194
Likes
134
Rating
5
P
PrintablesMisterJ

K2 (Pro) Waste container / poop bucket (removable)

Please don't forget to hit the like button when you find this model useful. A waste container bucket for the new K2 (260x260mm) and the K2 Pro (300x300mm) printers from Creality. You can screw on the mount bracket using the original…

Downloads
1,193
Likes
72
Rating
5
P
PrintablesTerra

filament waste bin

Filament waste bin for my printer enclosure. It is optimised for 0.6mm nozzle but also printable with 0.4mm nozzle. Print it without support.

Downloads
1,178
Likes
117
Rating
4.96
P
PrintablesNora

Creality Hi Waste Box

there are 2 variant waste box, the small version can be printed in 180x180 Standard Setting / PLA / 0.2mm

Downloads
1,154
Likes
85
Rating
5
P
Printablessthone

Fishing Waste Line Collector

This is a "must have" if you fish... there's nothing worse than seeing discarded fishing line while out fishing or laying in the bottom of your boat. Discarded line can also impose a threat to wildlife. These are a few waste line…

Downloads
1,118
Likes
252
Rating
4.4
P
PrintablesDavid D

Multiboard wastebin

This simple bin can easily be attached to your multiboard using the multiconnect connector system . I would recommend to at least use 4 connectors, one for each edge. Note the bin is using an optimised “quick change” version of the…

Downloads
1,091
Likes
262
Rating
5
P
PrintablesManuelM

Bambu Lab A1 mini waste bin

Update: September 26, 2023 This model is intended to be printed specifically for a mini printer. In this regard, you will find two models within the .3mf file. I want to be transparent; this is a design in progress. Unfortunately, I don't…

Downloads
1,053
Likes
90
Rating
4.88
P
PrintablesRoboticsRob

Trash Bin for 3D Printer Waste

A small geometric trash bin I designed for placing near my printers and near my workbench where I cleanup parts. There's a few fun features about this bin that make it unique and helpful for 3D print waste: -A brim around the top of the…

Downloads
1,026
Likes
146
Rating
4.57
P
PrintablesGreg

Bambu Lab X1 Filament Waste Bin - Narrow

Please add a “like” if you found this model helpful. I love earning some prusmeters :) Remixed to narrow the depth to 100mm, so it fits behind the printer when pushed up against the wall with the external spool holder attached. I included…

Downloads
1,023
Likes
42
Rating
5
P
PrintablesPeace

Deflector compatible waste poop bucket (Bambulab A1, A1 mini)

I was looking for some cool waste box for my A1, but haven't found version that both looked cool and was compatible with extra supports needed when you use AMS on the top and used deflector instead of huge wall. Hence designed this little…

Downloads
999
Likes
100
Rating
5
P
Printables3Ddoofus

Anycubic Kobra S1 Filament Waste Bin REMIX Combo with Air Duct Seal

Added the inspired hex holes to allow for better fan exhaust and better viewing in the catch bin. Added brand model name stamps and modified GI Joe Cobra. The Duct+slide option was printed in 2 pieces because of the duct overhang. Remix…

Downloads
926
Likes
138
Rating
5
P
PrintablesNathan

Mono Master - store waste line

Take a step towards more sustainable fishing with the Mono Master, a cleverly designed device crafted to help you manage and collect fishing line cutoffs. Engineered for convenience and environmental responsibility, the Mono Master…

Downloads
915
Likes
258
Rating
5
P
PrintablesOld Curmudgeon

Intex sand filter waste port adapter

I couldn't find a model here or any other site I checked that would screw on the waste port on our Intex sand filter. After some hair-pulling (Intex seems to use an oddball thread) in Fusion and several iterations, I now have an adapter.…

Downloads
882
Likes
159
Rating
5
P
PrintablesBobbyZ

Wasteland Mask

A post-apocalyptic raiders mask

Downloads
882
Likes
347
Rating
0
P
PrintablesMr TVR

Creality K2 Plus waste poop chute, exhaust outlet vent and waste bin

This set provides a great way to remove waste poop and chamber emissions from your shiny new Creality K2 printer. The set includes the following models: The main single part “Y” piece which connects to the twin exhaust outlets using a…

Downloads
880
Likes
132
Rating
4.83
P
PrintablesAdudino

Design Waste Bin / Trash Bin - for Desk, Kitchen Counter, Workspace, ..

Welcome to Adudino: (One of) Your Gateway (s) to 3D Models Get exclusive and practical designs. Model Info A neat design bin to help keep your desk or other makerspace tidy. An exceptionally handy little waste bin for on your kitchen…

Downloads
860
Likes
193
Rating
4.78
P
Printables3DThinker

Waste Chute / Basket Speed Print - Bambu Lab X1C

Waste / Poop chute for the BambuLab X1 Carbon. Used different wall thicknesses to help with prints times. Below slicer times are based of of using a x1c with a .24mm layer thickness. .8mm wall - 3hr 15min 1.2mm wall - 4hr 14min 1.5mm wall…

Downloads
857
Likes
29
Rating
4.67
P
Printables3D_Print_Alex

Müllbeutel Rollen Halter - Holder for Waste Bag Rolls

!! English version below !! ----------------------------------------------------------- Ich habe diese Halter erstellt, da ich nichts gefunden habe, das meinen Vorstellungen entspricht. Folgende Müllbeutel finden hier Platz: 15 Liter 35…

Downloads
819
Likes
193
Rating
5
P

Waste oil container Kit Card - 1:24 scale garage diorama accessories

Summary This is a 1:24 scale model of a waste oil collection container in a kit card style. Versions The complete set is available in a 3MF file for a one-color print. There is a 3MF-file with predefined colors intended for users of AMS…

Downloads
793
Likes
159
Rating
0

Wall drilling waste cup

Stick it to the wall with a strip of painter's tape so the hole-to-be goes between the flat “fingers”. After the drilling is done, tappy-tap-tap the cup with your finger so the remains of the dust still clinging to the edges fall down to…

Downloads
763
Likes
149
Rating
5
P
PrintablesSolus

Zero Waste Quail Feeder Port

Coturnix Quail Feeder Port Print as is Recommend PETG 1 1/2 inch drill bit needed Screw isnt perfect but the easiest way is to turn the port upside down when screwing it in.

Downloads
750
Likes
42
Rating
5
P
Printablesredmoth

[improved] Flexi Leash Dog Poop Bag Holder - Compact and Lightweight - Stores both Clean and Used bags - Poop bag roll dispenser storage inside and loop hook for full waste dog poo bags outside classic lead

Update - January 2025 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Dog poop bag holder for Flexi leash I made…

Downloads
748
Likes
77
Rating
5
P
PrintablesRYTEK 3D

Bambu Chute with removable waste bucket

Hey there, hi there! Easier to remove waste bucket! Prints in one go around on the X1, I used tree supports for a clean print. Update 10/11/2023 - Added a Chute cover as requested. And a bonus super chute lid! (anti-Cat attempt)

Downloads
741
Likes
50
Rating
5
P
PrintablesJudpraJobz

Purge Poop Bin, Waste Bin For Kobra S1 | Magnet 10x2.6mm

0.2mm layer height recommend PETG filament, PLA also fine.

Downloads
710
Likes
29
Rating
0
P
PrintablesDigital-Twin

Countertop Food Waste Bin

Very simple design for a food waste container, for those who are inclined to compost. Could also be used for storing things...like cookies. Lid is not designed to seal tightly, and only sits on top of the bin. Print instructions Print as…

Downloads
688
Likes
109
Rating
4.86
P
Printablestransformat

Pedal trash can | waste bin | storage - fully printable | scalable

Small pedal trash can / storage container round and rectangular designs Removable waste bin for workshop, table, kitchen, bath ... 17 cm / 6.7 inch height (larger scalable) Printing Print parts in the given orientation! the connecting…

Downloads
675
Likes
195
Rating
5
P
PrintablesAlex Lab

Poop / Waste Chute – K2 PRO (CFS front-redirect), symmetric

Two versions : Redirects CFS purge (“poop”) to the front of the K2 PRO for easy clean-up. Tight mechanical slack by design; a light sandpaper pass may be needed. Default right-side install; mirror in slicer for left. Thermal & airflow…

Downloads
673
Likes
52
Rating
5
P
PrintablesJAV3D

Cash can - Waste Bin Coin Bank

English 3D-Printed German Waste Bin Coin Bank: A Creative Saving Solution Description: Experience the unique blend of creativity and functionality with our 3D-printed German waste bin coin bank. This charming design includes two wheels,…

Downloads
662
Likes
127
Rating
5
P
PrintablesHami

Filament waste container, poop basket / Filament Abfallbehälter

Suitable for my Anycubic Kobra 3 filament waste diverter https://www.printables.com/de/model/935600-anycubic-kobra-3-filament-poop-diverter-anycubic-k ============================================= Passend für meinen Anycubic Kobra 3…

Downloads
634
Likes
46
Rating
5
P
Printables70r71

0-waste: Jubilee

0-waste: an improved multipurpose robot Do not expect to see this model working on a shipwreck or collecting material from an impact site or minig on an asteroid field. This is the model that a large corporare want as a security service.…

Downloads
613
Likes
374
Rating
4.75

Anycubic Kobra S1 Poop chute waste purge colecter

Poop chute purge collector what ever you want to call it. This is for the kobra s1 by anycubic. Can be installed using the existing screws in the back of the printer and comes with a removable waste collector so you don't have to scoop…

Downloads
609
Likes
41
Rating
0

Nuclear Waste Barrel EDC Bead

This is a small EDC bead designed to look like a nuclear waste barrel. It works well as a lanyard bead, zipper pull, or keychain accessory. The model is split into two parts for easy multi-color printing, but it can be printed on any 3D…

Downloads
608
Likes
347
Rating
5
P
PrintablesjonnieZG

Hangable Filament Waste Bin (old version)

This is the old version - see my latest, upgraded Version 2 . Hangable filament waste bin inspired by some IKEA wall organizer boxes that I saw once, but couldn't find one later. The bin can be easily removed when you need to empty it,…

Downloads
589
Likes
174
Rating
4.44

Flashforge Creator 5 Waste Ramp V3 - Rear Purge

Key Improvements & Updates Zero Base Collision: Designed to match the exact height of the hotbed's underside spacers. It will not collide with the bottom of the printer if you accidentally leave it on after purging. Updated for Rear…

Downloads
587
Likes
88
Rating
4.86
P
PrintablesVlad Patras

Creality Hi Parametric Waste Box

Box / Bin / Basket for Filament - Litter / Poop / Waste / Purge compatible with Creality Hi. Parametric design is included (f3d and step) so it can be customized.

Downloads
586
Likes
49
Rating
4.75
P
PrintablesSnowstorm

Hangable trash can for filament scraps or other waste with lid. Easy to remove from the wall with hanging system.

This is a wall-mounted trash can to put your leftover filament in or to collect other waste. The easy-to-use hanging system allows it to be placed on horizontal and vertical cement joint lines. This trash can has a capacity of 10 cm deep…

Downloads
568
Likes
80
Rating
4.86
P
PrintablesAndarne

GTA Wasted Keyring

Designed for MMU2 printing; body and text separate models. Print in desired colours, at 0.2mm with 15% infill.

Downloads
558
Likes
110
Rating
5
P
Printables3dBearnicorn

Waste basket

My daughter needed (demanded) me make her a new waste basket. Prints great in Vase mode with 0.8mm extrusion width.

Downloads
555
Likes
43
Rating
5
P
PrintablesPaddes

Nuclear waste drum

Prop barrel with radioactive warning symbol

Downloads
533
Likes
46
Rating
4.88
P
PrintablesGLeZz

Snacks serving bowl with waste compartment and phone stand

Just another snacks serving bowl with waste compartment but now also with integrated phone stand! Please use LIKE button if you download and consider a tip :o) Thank you!

Downloads
521
Likes
157
Rating
4.75
P

Slim waste chute (poop chute) for Bambulab P1P - No supports needed - tried and tested

A slim version of the Poopyshoe to fit within small enclosures. The filament waste slides easily and don't get stuck. Tested in an Ikea Lack enclosure, fits well and it's easy to access to clean. Modeled from scratch based on…

Downloads
510
Likes
29
Rating
5
P
PrintablesYouCanCallMeAl

Fishing Waste Line Collector (No Velcro, snap version)

Remix of smaller snap version of "Fishing Waste Line Collector" by sthone that does not use velcro and has improved fit.

Downloads
500
Likes
51
Rating
5
P
PrintablesSteve Eglon

Remix of AD5X Waste Chute

This could do with someone a bit better than me working the angles so that each piece finds the collection vessel, at the moment the flat spot on the corner is a collection point until it's sufficiently full to continue it's journey. I've…

Downloads
495
Likes
72
Rating
5
P
PrintablesVergil

Plastic Waste Bin

I wanted to have a bigger & cooler looking waste bin around for scraps & purge lines since I have the printer in my living room. I cooked this up quickly and thought I'll share. Maybe others like it as well. Bin dimensions: 100x100x115…

Downloads
490
Likes
68
Rating
4.56
P
PrintablesKubak

Babylock Victory waste collector

One of my first designs. Guess it could be improved, but it works.

Downloads
481
Likes
26
Rating
4.83
P
PrintablesErdbeerminister

Kobra S1 Waste Basket magnetic - Remix

due to limited space behind the printer and unwillingness to use the proprietary screws i made a megentic version where the magnets are actually sitting in the parts and are not attached by duct tape. I printed with 0.2mm PETG no supports…

Downloads
481
Likes
31
Rating
4.75
P
Printablesbexpl

Waste Bin for Ender 3 v2 neo

Printed with 15% infill and support for the bottom plate (blocked for top latch). Bin needs to be placed towards the front of the printer to not block Z-axis movement. I added a bit buffer in the depth, but decided against a spacer for…

Downloads
481
Likes
65
Rating
4.67
P
PrintablesJohn

Waste Bin for Prusa XL

I didn't want to buy another trash can, and had some spare filament so decided to make a waste bin that just sits on the extrusions on the Prusa XL. This is to put any filament that I've cut off or for a place to throw away purged…

Downloads
476
Likes
96
Rating
5
P
Printablessecv

Fishing Waste Line Collector (No Velcro)

A remix of "Fishing Waste Line Collector" by sthone that does not use velcro. Instead, thread the fishing line into the holes of the inner cylinder. Compatible with the original M3 screw version files. CHANGES Outer Cylinder: improve…

Downloads
469
Likes
68
Rating
5
P
Printablesredmoth

Carabiner Dog Poop Bag Holder - Compact and Lightweight - For Dog Leash - Works with Split Rings - Stores both Clean and Used bags - Poop bag roll dispenser storage inside and loop hook for full waste dog poo bags outside

Update - January 2026 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Carabiner mount dog poop bag holder This is…

Downloads
465
Likes
59
Rating
5
P
PrintablesICarryDesigns

Anycubic Kobra 2 / Kobra 2 Neo Rail Cover + Waste Box

The design has two variations, variation one has a waste box built in and variation doesn't. Print ONLY in the orientation when downloaded, changing the orientation could make the print fail. Tips: STL FORMAT - download ONLY the variation…

Downloads
450
Likes
55
Rating
0
P
PrintablesJorge

Bambu lab waste funnel

Introduction This solution is a real Columbus egg , for those who do not know the explanation, here it is Egg of Columbus - Wikipedia This will make you know when the reservoir is full of waste, by dropping out; it has an embedded and…

Downloads
449
Likes
139
Rating
4.67
P
PrintablesFH

WBH - Waste Bag Holder for Festool MFT 3

This is modelled for the Festool MFT/3 contest and a re-desing of a circular waste bag holder that I published a month ago. I think the rectangular shape better suits the application at the workbench. My design consist of five parts, the…

Downloads
448
Likes
249
Rating
5
P
PrintablesLazyMaker

Nuclear waste barrel - vase mode

After printing, use permanent marker to colour the symbol. Best results achieved by using yellow filament. P.S. Model on photos was printed at 70% scale.

Downloads
444
Likes
77
Rating
5
P
PrintablesAlex Johnson

Qidi Q2 Filament Waste Bin

Qidi Q2 Waste bin, can be clipped on. Poop Bin

Downloads
429
Likes
38
Rating
5
P
PrintablesStavdahl

Elegoo Centauri Carbon 2 waste chute

Update 14.08.2026: Added a V2 Version of the drawer, hopefully it's gonna make it easier to empty the drawer. Overview The first thing I made after receiving my CC2. This is a simple side drawer where the “handle” is just a hole. It works…

Downloads
426
Likes
64
Rating
4
P
Printablesewwbananas

GTA WASTED Lamp Back Cover REMIX

Hug the LED strip in place LED strips double stick tape sucks! So I redesigned the back cover of the GTA wasted lamp to hug the LED strip in place. Mount the plug Add a short pigtail from the LED strip out to the hole, CA/Superglue/Krazy…

Downloads
420
Likes
366
Rating
0
P
PrintablesMiseryEngine

QIDI Q2 Waste Bin

This is a simple poop box I created in Fusion emulating the body style of the Printer with an embossed QIDI logo. Print it in black or silver for matching body color palette. I did not want anything wrapping around the unit so this is…

Downloads
414
Likes
13
Rating
5
P
PrintablesDarnie

Bambulab A1 purge waste deflector

I'm VERY new to 3d printing and this is a VERY basic model. Most of you could do much better with your eyes closed, but I've taken a few builds from here, so I thought I'd add one in return. This press fits (although you can use some…

Downloads
400
Likes
30
Rating
5
P
PrintablesKange

Elegoo Centauri Carbon Poop Waste Drawer

Poop drawer for the Elegoo Centauri Carbon to make easier to empty and covers the poop door. You will need: - x2 existing poop chute screws - x1 chassis screw OR M3x10mm screw if the original is no enough long - x2 6x2mm magnet Print…

Downloads
383
Likes
44
Rating
4.67
P
Printablesdukinarow

Creality Hi Compact Waste bucket

The Creality Hi Compact Waste Bucket for people without a CFS is designed for efficiency and convenience in managing printing waste. Its compact and grid-like structure is optimized for attachment to 3D printers, keeping the workspace…

Downloads
382
Likes
25
Rating
4
P
PrintablesNickR1983

Kirby Poop Chute/ Waste eater/ Poop sucker/ Candy bowl

I made this iconic Poop Chute/Sucker for the BambuLAB A1. Also usable as a candy bowl or something like that. Use AMS and share those makings. For commercial use. If you make a ton of money with it we are super happy for you, but also…

Downloads
372
Likes
60
Rating
5
P
Printablesdenix

Qidi Q2 Simple waste basket

An attempt to make a simple to print and easy to use filament waste bin. There are two versions of hangers: V1 - Mounting in standard sockets using extended screws (requires 2.9 x 16 mm with countersunk head). V2 - Since I didn't have the…

Downloads
369
Likes
30
Rating
5
P
PrintablesKali

Babylock Acclaim Cut Waste Container

A container to collect cut waste for the Babylock Acclaim. It has a small ledge to be attached to the machine. You need to lift the machine slightly, then move the container into its position.

Downloads
368
Likes
11
Rating
5
P
PrintablesPewperSkewper

Battery Waste Bin with Slot

A waste bin container box for spent batteries. Modification of Box with sliding lid by Redev22. Print with 4 walls and 15% gyroid infill for strength. Model files are provided to print everything together, or everything separately. Does…

Downloads
354
Likes
101
Rating
5
P
PrintablesJuicyPrints

Waste Bucket For Bambu Lab Printers with Hanger (V2)

My waste bucket design aims to be more efficient than other models while retaining functionality, capacity, and aesthetics. It mounts cleanly and securely to the printer but is easy to remove. It protrudes roughly the same distance as the…

Downloads
351
Likes
54
Rating
4.8
P
PrintablesBootjevaarder

Bambu Lab P1S Filament Waste Bucket

Filament Waste Bucket, another one…. But it was fun to design in Tinkercad and works well. I think it will fit X1C as well. In comparison with other designs I think this one is pretty light: 0.19 kg. Printing I printed with PLA+, 3 walls,…

Downloads
349
Likes
18
Rating
0