131 models
Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
Webbing adjuster with a clip point for securing straps or to connect to additional objects. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
I like the GSI Infinity camping mug for early morning hikes with my coffee, but it when you clip it to your bag empty it flips upside down and the inner cup can slip out*. Add this clip and stitch the webbing handle closed at the top and…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Application The double D-ring buckle for strap webbing is not the fastest to close, or the easiest to open. But it is the strongest there is to my knowledge (see video at the bottom of this page). If you need a quicker or more convenient…
A parametric FreeCAD model, within the spreadsheet there are 3 simple parameters: Width - set the width of the nylon strap you wish to make a buckle for EndThickness - set the thickness of the material on either side of the strap Depth -…
This mount is designed for standard MOLLE webbing, laser-cut MOLLE , and standard 25mm webbing used on most backpacks. This includes non military packs! Furthermore I used the official apple design guidelines to get the curvature of the…
A few people have been looking for a DIY top strap for their Steam Frame as Valve's Ergonomic Kit is pricey and sold out in a lot of places, but the top strap makes a difference to comfort so I've made a DIY version. I have the Ergonomic…
As a rock climber, I found storage while on the rope was few and far in between, so I have designed a few solutions to this issue. This is one of those. Designed for holding tools or bits while routesetting in a gym or bolting outdoors,…
Applications Strap webbings are very convenient for all kind of storage, holding, fixing and securing applications. The straps are cheap and easy to get (50m of 1 inch, 25mm, straps are around 15€ at Amazon). Snap-buckles are also very…
A simple MOLLE attachment to hang your sunglasses on your backpack shoulder straps. The hole should be big enough for most sunglasses, if not the parametric design is included so you can tweak it to your needs. Print in PETG for maximum…
This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version. Update: versions are also available for 30mm, 1.5", 50mm. Design parameters: The webbing slots are sized for 1" webbing (actual width is…
Male and female buckles compatible with the belt strap buckles on a DLX Twinpeak backpack. Useful if you broke one, or need an extension strap to make it fit. They also work fine with any 1.5" webbing straps. Print the female part…
It is time for another plant: Inspired by the interdigital webbing of animals like frogs and even human embryos I present to you: The Webbing Tree. These trees will grow almost everywhere. The green one I painted probably likes wet areas…
I printed mine in PLA with a 0.24 mm layer height and a 0.6 mm nozzle. It can be scaled up for larger webbing. Add 25% for each additional 5 mm 125 % for 25 mm 150% for 30 mm 175 % far 35 mm etc.
After a few variations I came up with this g-hook to use on my motorcycle luggage. I have used ASA filament and plan to use it for some light duty support.
A simple MOLLE attachment to clip an hydration bladder tube onto your backpack shoulder strap. Parametric design included so you can tweak it to your requirements if needed. The default supported tube diameter is ~10mm.
I designed this so I can attach my webbing easily to a rope that can then be secured to the ground or another anchor point. Once the webbing is attached to the tensioner, thread the rope trough the holes and tension as required. I have…
Buckle for 40mm Webbing-Strap I was looking for a harness buckle for 40mm webbing similar to the buckles used on climbing harnesses. But since I couldn't find anything for sale at an acceptable price, I printed some myself. The second…
I got my first backpack with molle webbing and wanted a luggage strap to attach to the handle of carry-on luggage. There are already a lot of molle clips online, but I couldn't find one that did exactly what I wanted, so I designed this.…
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
Application If you have a bag or something, that has a sewn closed strap loop that you need to connect to, there is no way around a slotted design. In my load tests I found that a hook that is open on the side, is actually better than a…
A hooks to hang things on MOLLE. One possible use is hanging a hydration bladder. The parametric design is included if you need to modify it for your needs. Print in PETG for temperature and mechanical resistance.
Here is a catch all bowl with a Rattan Kane webbing pattern. Think of it as a little gift basket you can use to gift thoughtful goodies. I would say, perfect for mother's day! Multiple filaments not required. The same print profile can be…
This is My design to replicate something like the Fidlock snap used in https://www.reddit.com/r/EVERGOODS/comments/16vg5vw/cpl24_mirror/ , until I got the money saved up to buy the actual Findlock Snap connectors. This is just a slide-on…
I needed a triglide for some 38mm (2.5") webbing to hang a wildlife trail camera. It's even got the grippy teeth things to keep things good and secure. You can ignore the imperfection on the part in the photograph, that was due to me…
I had already printed several Prusa Face Shields and could not source any of the elastic strap material. I had some 3/4 Inch (19mm) Lightweight Polypropylene Webbing lying around so I designed these buckles to fit the RC3 Version of the…
Redesigned the the thing by mistertech fully from scratch to meet my personal esthetic, mechanical and structural requirements. Now it suitable for a standard 30mm strap. Print Settings Printer: Woodstock2 Rafts: No Supports: No…
Molle Mount for a 30mm Flashlight (Nextorch TA-30) and a glo-toob (marker-light) Both fits on the Molle Webbing Plate. No Supports needed. When printed the gloo-toob holder cut the 1 perimeter thick layer between the clamping. Other…
I used it with elastic 25mm band. Can be easily adjusted to any size required. If need help with that -let me know.
The 25mm webbing sliders I purchase are often too slippery to be reliable. I couldn't find one I liked online, so I made my own. These work well with standard 25mm webbing. They have pretty aggressive teeth to grip the webbing when…
printable version of a slik clip, allows easy attachment + removal of webbing. onshape link . samples in photo printed in polymaker ASA on a p1p w/ a 0.8mm nozzle for strength. cover is the clip lifting ~30lbs. from testing i'd estimate…
This was originally designed for a bag sewing project to connecting webbing/straps to a hook (to make the strap removable). Webbing/strap goes through the wide end, the circle end connects to some sort of hook/clasp/thingy. It was…
A remix of @TaylorSteinf_1252185 QUICK-CLIP (GEN 3) to allow the attachment of 25mm webbing. Buy me a Coffee If you like this design and would like to support me, please consider buying me a coffee
This is a modified design to the https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2 that allows the user to use anything from rope (up to 0.25" diameter) to elastic bands (up to 1 inch) to cloth/nylon webbing (up…
This model is parametric and features variables for hose diameter, clip thickness, and webbing dimensions. The STL is set up for a 15mm wide clip to connect 16mm webbing and 10mm hose (standard size for a Platypus hydration pack).
Have a Yeti Hopper cooler with their 1” strap and loop Hitchpoint Grid and wish you could make it more versatile? Something extra for tailgates, road trips, or a day at the beach? Here’s a start. These designs were made for “hard” TPU,…
This MOLLE or PALS T Mount allows a range of attachments to be fitted through a PALS slot. It is really easy to use and useful to add to small webbing loops, as demonstrated in the images. Buy me a Coffee If you like this design and would…
for 12mm belt. Cad file included if needs to be resized.
This is a keeper for loose ends of webbing on a backpack so they're not flopping around. This is made for (2) pieces of 20mm webbing. If it's tight, you can scale it's width in the X axis in your slicer. This is firm on an Osprey pack I…
I use 1" strapping for several projects. The buckle lets you loop the strap thru an eye and then back securing it. Here are the things I used for this project: * 1 inch strap / Heavyweight Polypropylene Webbing ( https://amzn.to/439M6Cy )…
100 % infill PLA @0.15
Cosplay webbing accessories. Used to join and adorn 25mm (1 inch) webbing. All print without supports, except the 4-way. Print the 4-way with minimal simple supports. For light-duty or aesthetic purposes. Not tested for strength.
Simple clips for 20mm and 40mm webbing, to keep the ends neat and tidy. I printed one 20mm clip for sternum strap and two 40mm clips for hip belt.
This "clamp" is a component. It is used with webbing and a ratchet to create a complete corner-clamp system. Four of these clamp pieces go on the corners of a box or cabinet, and a ratchet draws them tight. I use a ratchet and strap…
Attach 1/2" webbing with a single screw
Remixed this to make it a little wider. The hydration water tube I have is insulated, so it's a little wider.
Print Settings: -PLA +/PETG -80% Infill -Mostly <1.5 grams per item I used Ender 3 V2 to print this item. Thank you
Simple clip for webbing. I designed this to make compression straps for my backpack. To replace my broken one.
This is a webbing slider for adjusting the point of contact between webbings and textile goods. Can be used to tighten or loosen straps. I've included STLs for two sizes/styles listed in millimeters, webbing width followed by webbing…
I made this to replace a clip that was broken on my Ortlieb Velocity Cycling Pack backpack. I believe that it is an improvement over the original design because it grabs the strap more tightly and holds both the belt and the slack…
A model of a replacement ground stake for an outdoor volleyball boundary webbing such as "Park & Sun Sports Outdoor Volleyball Boundary Webbing with Ground Stakes". One of the originals broke so I modelled it, making the back part larger…
This is a follow-up project to a previous 3D printed Line grip project. This has been break tested at over 6kN in PLA (minor modification since that test should increase this) - more tests to come. PETG will be even stronger! This was…
These are clips to attach things / projects to flat webbing. One side is closable allowing easy attachment and detachment from webbing on packs, clothing, etc., and it closes securely and won't slip open under reasonable load. There are…
I've engineered this webbing buckle to offer enhanced grip on webbing bands, eliminating any loose ends. The design is versatile, compatible with a broad spectrum of webbing bands. It's crafted to stay securely in place while being…
My work backpack straps kept slipping every time I slung and unslung my bag. So instead of buying I designed these in Fusion 360. Photo is of an earlier model, files are slightly closer fit and more chamfered. Source file included.
The buckle on one of my hats broke, so I made this to fix the issue so I can still wear the hat. It is sized for ¾” webbing and fits into a loop to secure the webbing.
Jaguar Seat Belt Webbing Retainer GJA2447AA Updated version, A seatbelt retainer for Jaguar X100 (XKR & XK8), this model is for the right or left handside A pillar. Print in picture is done with eSun PLA+ bone white, which does match a…
I use ¾" strapping for handle projects. The buckle lets you loop the strap thru an eye and then back securing it. Here are the things I used for this project: * 3/4inch strap / Heavyweight Polypropylene Webbing ( https://amzn.to/39Lom93 )…
This is a quick release mount to attach a Elecrow ThinkNode M1/M5 to 25mm webbing. Build notes You will need two M2*4mm hex bolts to attach the back plate to the device. PETG is preferable to allow for a bit of flex on the release tab.…
I wanted to fasten down my hot tub cover with 2 inch webbing, so I purchased this “Plastic Buckles, Heavy Duty Side Release Buckles, Dual Adjustable parachute buckle, Plastic clips for Webbing straps (2 Inch,4 Pack)”. I needed to mount…
Naming convention: beltclip-{beltwidth}-{beltthickness}-{number1}-{number2} beltwidth is the width in mm beltthickness thickness in mm time 10 number1 number of belts fitting on one side number2 number of belts fitting on the other side…
This triglide was printed via nylon SLS and is meant for use with 1.5 inch / 38mm webbing. It is slightly thicker, but is very strong.
Thread together “catch all tray” I designed to sit atop one of my desktop PCs so I included optional legs to allow airflow for the CPU radiator. Print the "sides' upside-down (no supports). You may need supports under the threaded holes…
For 25 mm / 1 in webbing, designed to be equivalent to the Timbuk2 “ 1 inch Male Clip | Messenger Bag Clip Attachment | Accessory ”, also marked “Stealth”. Unlike the original clips that have to be cut off the bag, this design features a…
This is a webbing clip for the odd shaped Teva generic Epipens, it fits 1" nylon webbing. See the photo gallery for recommended print orientation. I recommend PETG at 100% infill to give it some flex and strength, make sure to add…
Two parts. Made to fit a countersunk M4 bolt. Use a thread tap to get the threads smooth. 25mm is standard width but found out that some webbing is slightly wider so made one 26mm. Melt a hole in the webbing for the bolt to go through.…
Replacement even more minimal belt buckle to the Grip6 aluminum one that's still going strong. I just wanted a 3DP piece of flair for my EDC. Here is a link to Grip6. I still love their belts and buckles and it's 5.5 years old and still…
Buckle for 25mm webbing 3 versions for 25mm wide webbing Print settings: 0,2mm layer 8 walls use supports
mount for UV-5R radio to attach via a carabiner. needs: 2x M2.5x12 bolts loop of 19mm wide, 1mm thick webbing
I needed a way to connect my ID badge to my cross-body bag. Clipping the caribiner to the strap directly was not convenient. I decided to create one as a modelling exercise. This has a slot so that you can connect it to the strap without…
I was having issues with pieces sliding under each arm of the wheel, so added "webbing" between each spoke. Can also be printed on their own to replace just the inner ring of the standard cardboard wheels if you just want coloured trays.
This machine is designed to automatically measure, mark key locations, and then cut webbing or cord for production purposes. These files are provided as is, the model was assembled and tested to be working properly, and the firmware was…
One inch slide files include: Double slot (1DoubleSlot) Triple slot (1TripleSlot) Triple slot 1 inch double to 1.25 inch single [1(2)to1.25(1)TripleSlot) One and a quarter inch slide files include: Double slot (1.25DoubleSlot) Triple slot…
Some safes come with PALS webbing inside the door, which can be used to mount holsters or pouches. Mine also came with plastic hooks for hanging keys, but not enough for all of the spare keys I keep there, so I found myself hanging…
Cinch buckle with open hook for 15mm webbing.
Best printed with extra perimeters (no infill at all).
Remix of Camera Strap Quickrelease by Mountainstorm , making it more compatible with standard webbing hardware, edges chamfered for comfort, and is easier to print with less enclosed supports supports to remove. Straps/Webbing can be sewn…
A g-hook for 38mm / 1 1/2 inch webbing. All webbing holes are evenly spaced. Can function as a triglide as well.
I got a request to design a minifigure vest based on the Canadian CADPAT design. Here is my attempt at it. Prints upside down with no supports needed.
Holds 1mm strap. Meant for Alpaka Tech Case strap for example. V1 are for different style of opening, you can test those if have bigger than 1mm thick strap. Models in picture are printed with ASA.
A squared Planter with Grid webbing detail with a drip tray. Planter dimensions: 125mm x 115mm x 125mm Ironing is active
This webbing split bracket is designed for use with the GFC Camper's 0.5-inch T-slots, providing an attachment point for 1-inch webbing. Fabricated from ASA (ABS) the tolerances are tight. For me these brackets require pliers for final…
This a holster for 1.5oz cans of modern OC spray. I modeled it around the Fox Labs 1.5oz can but other cans with a similar style should work. The fit is a little on the loose side when printed on my printer but a few wraps of electrical…
Designed specifically for rock climbing crash pads, but should work for various applications where you need to secure 1 inch (25mm) webbing to a loop. Tested with PCTG to hold 200+ newtons (~50lbs). Recommended Print Settings: Material:…
These are made for cheap 1-in webbing ratcheting straps from Home Depot (HDX brand if I recall correctly). The loose ends were getting tangled up in my ammo cans. The straps being all tangled makes a good excuse for not securing the load…
I wanted a way to mount my Aranet4 to the straps of my backpack. This case holds the Aranet very securely to 1" or 25mm webbing. It absolutely must be printed in a flexible material. I printed mine in Fiberology MattFlex 40D. I also…
Designed for sewing dog harnesses and collars with a Brother Innov-is M280D without embroidery backing. The embroidery area of the MD280D is 100mmx100mm, the hoop can handle webbing up to 30mm. The metal plate of an original hoop is…
Harness Hardware for use with 1.75 inch webbing Category: Sport & Outdoors
Need a place to clip a badge onto your backpack or bag? This 2 piece support free model snaps around 2 inch wide webbing. Use this to mount a loop on any 2 inch wide webbing.
This has a 1mm gap on the side of the top section and a 3mm gap on the bottom section. Allows replacing metal g-hooks. I printed this out of PA-CF, but It would probably work fine in other materials. I did try standard nylon filament, but…
This practical and easy-to-print upholstery webbing stretcher simplifies upholstery projects by helping you stretch webbing securely and evenly. Perfect for DIY furniture restoration and upholstery tasks, it ensures consistent tension and…
This is a webbing keeper for a 38mm waist belt. This takes a bit to get on but once on, works great to keep the end of a waist belt from flopping around. Print as oriented with 5 perimeters to ensure it's solid and in PETG at the high end…
This is a sliding webbing strap keeper. Gravity will keep it in place at the bottom of your shoulder strap. :) Print at the high end of your PETG range. 5 perimeters for solid print. .97 extrusion multiplier to avoid excess build up on…
Easy to print Gridfinity bins to hold your webbing, lashing, strap, ribbons or whatever other flat material you have wound up and without a home. Designed to hold those rolls of material along the edge of a shelf or counter (Feed slot…
A triglide with two extra columns for 1.5 inch / 38mm webbing. Allows further securing opportunities.
Remix but for looped webbing. Mix and match, have one side adjustable and one looped if you want Remix and compatible with the original
This is a single through-hole g-hook meant for use with 1.5 inch (38mm) webbing. It's intended to be SLM printed in stainless steel or aluminum. Anything less will most likely be too weak due to the thinness of the design.
