Search results: wled

Sort order

465 models

P
PrintablesHellweaver666

QuinLED - Dig-Uno Enclosure for WLED

I wanted a nice enclosure for my QuinLED Dig Uno board and quickly put this together. Still a work in progress but it should all work! Variety of ventilation covers included (and one with no vents so you can make your own). Features:…

Downloads
55
Likes
13
Rating
0
P
Printablesscubam@xx

Acrylic glass stand with WLED lighting effect

This stand is designed for an acrylic glass plate with a width of 135mm and a thickness of 4mm and a height of approx. 150mm. It is easy to print in two parts and without support. The acrylic glass plate is illuminated with a WS2812 LED…

Downloads
47
Likes
11
Rating
0
P
PrintablesSatellietje

Glowing WLED or LED all alphabet letters and all numbers 8.5 cm high

👍 Do me a big favor and hit the Like button! ✨ 🛒 Shopping List WS2812B RGB LEDs (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Thin wire 30AWG (AliExpress) Black filament – Sunlu Black Warm white filament – eSUN White‑B Solder tin Cable…

Downloads
9,120
Likes
1,778
Rating
5
P
PrintablesRauks

Minecraft Ore Lamp (WLED / ESP32 D1 Mini USB-C)

A Minecraft Ore Lamp powered by a USB-C ESP32 D1 Mini and a WS2812B LED Ring , running WLED for full RGB lighting control. Bill of Materials The lamp was designed to perfectly fit the following components: USB-C ESP32 D1 Mini from…

Downloads
3,079
Likes
1,432
Rating
4.85
P
PrintablesSatellietje

Glowing LED and WLED all alphabet letters and all numbers 10 cm high

You are doing me a big favor by clicking the Like button :-) Shopping list for use with WS2812B leds WS2812B RGB Led (AliExpress) Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 28AWG (AliExpress) Black Filament - Sunlu Black Warm white…

Downloads
2,489
Likes
458
Rating
4.83

RGB Voronoi Lamp (WLED)

My video about this project: https://youtube.com/shorts/o-M_Fgu40zc?feature=share Parts List: 1-2m Addressable 5V RGB Strip ( I used about 1.1m of WS2812B 60 LED/m strip ) Some M3 Screws ESP8266 with Installed WLED ( Can also be ESP32 )…

Downloads
1,808
Likes
815
Rating
4.5
P
PrintablesHow To Homemade

PrismLume | Hexagon WLED Ambient Light Panel

Things you wanted to know before: Be aware of the effort involved in this project, you can't just put everything together in 10 minutes. You should also be good at soldering and know how to handle cables. It took me about 3 hours to…

Downloads
1,475
Likes
1,511
Rating
4.88
P
PrintablesSatellietje

Glowing WLED or LED Hearth

*** You are doing me a big favor by clicking the Like button :-) *** This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n…

Downloads
1,075
Likes
186
Rating
4.83
P
PrintablesRubin Starset

Wemos D1 Mini V4.0 case - WLED

TL;DR: You'll want the V5 case and the V4 lid. Choose between logo or no logo with the lid. Do not directly power more than 30 LEDs off of the USB power on any Wemos board, otherwise you run the risk of destroying the board or potentially…

Downloads
1,060
Likes
185
Rating
5
P
Printablesqrotec

LED Tower Lamp | WLED Tower Lamp

Die deutsche beschreibung steht als Txt Datei zum Download bereit. VIDEO here : LED Tower Lamp I would like to present you my LED tower lamp. In my case this is 5 segments high. You can theoretically build the lamp as high as you want…

Downloads
873
Likes
146
Rating
0
P
Printablessermelo

ESP32 case for WLED

ESP32 case designed to incorporate a microphone and connect to a leds strip. This was specifically designed to sound reactive WLED . 4 M2 bolts are needed to mount the ESP32 PCB, but nothing is needed to close the case.

Downloads
821
Likes
121
Rating
5
P
PrintablesSatellietje

Glowing WLED all alphabet letters and all numbers 20 cm high

*** You are doing me a big favor by clicking the Like button :-) *** 🔧 Project I have carefully listened to the feedback from the previous versions: 💡 Fewer LEDs than the 100 mm project 🔤 Bold, sturdy letters 🔗 Stronger links between the…

Downloads
789
Likes
172
Rating
5
P

Smart RGB LED Lamp with ESP32 and WLED

UPDATE 2025 New lampshade, HomePod style But it not easy to print, need use support with non-stickable material (PETG+PLA or special support) New top cup available! Smart RGB LED Lamp with ESP32 and WLED This customizable 3D-printed RGB…

Downloads
633
Likes
141
Rating
4.75
P
PrintablesSatellietje

Hello Kitty glowing wled or led

Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…

Downloads
533
Likes
151
Rating
5
P
PrintablesUrzhiataer

Fiber Lamp - WLED

Hi Maker, Here an easy DIY for building a Fiber Lamp using WLED. Based on an original idea of andrei.erdei, but completely redesigned (bigger with 36 leds, improved, simpler with WLED) This fiber lamp is controlled exclusively in WIFI via…

Downloads
523
Likes
723
Rating
4.94
P
Printablessmartroad

Digilogue LED Clock - WLED Clock

This is my “Digilogue Clock”. This uses a ring of 60 LEDs to be able to show the time, syncing with network time. As it uses the WLED firmware it is able to do all the lightshow's that WLED can do and also show the time! The clock can be…

Downloads
502
Likes
171
Rating
5
P
PrintablesBencham95

WLED ESP32 Box

WLED ESP32 Box to run inline with wiring and voltage step up. Didn't put a lot in to making it look good as its always hidden for my use cases.

Downloads
485
Likes
100
Rating
5
P
Printablesmagwled

MagWLED-1 Enclosure (official)

Basic enclosure for the MagWLED-1 WLED Controller (https://magwled.com)

Downloads
481
Likes
51
Rating
5
P
PrintablesJakster

LEDster - Ledstrip holder with WLED

This is a 3D printable LED strip holder for a led strip that is controllable with an app. In my example, I'm using an SK68612 RGB WW (warm white) LED strip with a LED controller from AliExpress. You can customize the height depending on…

Downloads
474
Likes
286
Rating
0
P
PrintablesVolan

Fiberoptic WLED Hybrid Wall Clock (40cm) v6.2

--------------------------------------------------------------------------------------------------------- Clock running WLED above. No, you don't need a large printer to make this. It's split into 6 segments. In fact - it should be…

Downloads
446
Likes
290
Rating
5
P
PrintablesMZ4250

Angel of Knowledge

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
440
Likes
72
Rating
0
P
PrintablesINVESTEGATE

LED RGB Matrix WS2812B ESP32 WLED 32x32 round square grid screen IKEA picture frame diffusor sound active

Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…

Downloads
432
Likes
146
Rating
4.67
P
Printablesespn8-theocho

ESP32 WLED Sound Reactive Box

I've seen quite a few ESP32 boxes out there, and even some that can accommodate a speaker for running WLED SR (Sound Reactive), but i wanted a box with a little bit more room. I made this container/enclosure for those that want a little…

Downloads
423
Likes
73
Rating
0
P
PrintablesTimon

Crystal Lamp with WLED

I remixed this lovely “Glowing Crystal Light” because I think I looks amazing, but I didn't have the lights from the original design. I added a cutout to except a 12 LED neopixel ring . I also added a compartment for a ESP 32. The ESP is…

Downloads
388
Likes
125
Rating
5
P
Printablesimeszaros

Wi-Fi connected LED Clock powered by WLED

A Wi-Fi connected seven-segment style LED clock powered by WLED. For details and plans check: https://github.com/imeszaros/ledclock/ 3MF files contains Slic3r settings. You can buy me a coffee if you like my design:…

Downloads
384
Likes
126
Rating
0
P
PrintablesOmphteliba

WLED Case for ESP32-Wroom-32 from AZDelivery

Remixed to fit my ESP32 Post-Printing The cover isn't press fit, so maybe you need to seccure it somehow else. How I Designed This I took the Step-file and imported it into Fusion360. Category: DIY

Downloads
331
Likes
46
Rating
5
P
PrintablesSatellietje

Apple logo glowing wled or led

Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…

Downloads
329
Likes
82
Rating
5

32x8 Display Case for PixelIt or WLed projects

Here is a case for a 32x8 RGB WS2812B-like leds strip, and a ESP8266/ESP32 controller on the back like a D1 mini, ESP-01… to control it with WLed or PixelIt firmware as an example. Fusion 360 and STEP files are included to allow remix…

Downloads
320
Likes
71
Rating
5
P
Printablesminc

Wall Mount for Skateboards with WLED Aluminum Profile Compatibility

The Wall Mount for Skateboards is a practical and stylish solution for securely storing and displaying skateboards. This innovative mount consists of two parts: one part attaches to the skateboard, while the other is mounted on the wall.…

Downloads
320
Likes
40
Rating
4.33

NodeMCU v3 Case for WLED

a simple ESP8266 case Designed for use with WLED firmware Assembly instruction Print the case Solder power and data pin to the NodeMCU pull the cable through the hole in the back put the MCU board into the bottom part of the case put the…

Downloads
309
Likes
22
Rating
5
P
Printablesdrathbone

ESP32-S3 SuperMini Case WLED

A simple click-lock case for an ESP32-S3 SuperMini. Nicely fitting, snug without being tight, with a small cable hole at the back for WLED or any other cables you want to run externally. The click-lock is tight and made to be that way for…

Downloads
299
Likes
25
Rating
5
P
PrintablesSeeed Studio

Enclosure for LED Driver Board for Seeed Studio XIAO (WLED, Home Assistant compatible)

This is the enclosure for the LED Driver Board for Seeed Studio XIAO (we included a hole for external antenna for WLED applications). This LED driver board is a compact yet powerful solution supporting both 5V and 12V LED strips,…

Downloads
288
Likes
20
Rating
0
P
Printablesandre2000

ESP32 (wroom32) + Level Shifter Box for WLED, Neopixel

This is a small box to hold an ESP32-Wroom32 micro controller, a level shifter and a female power plug. It uses M2 screws. Can be printed without any supports. Used Parts: These are just examples, not recommendations. The parts are…

Downloads
284
Likes
70
Rating
5
P
PrintablesKevin

D1 Mini Wled Case

Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. Like the ones on Aliexpress:…

Downloads
277
Likes
59
Rating
5
P
Printableslabatt

Larger Quinled Dig Uno case WLED D1 mini

Whenever I build something using an ESP32 or Diguno I want to make it clean. There's never enough space in the case to do that. Everyone focuses on making it as small as possible and feeding in ugly wires from the outside. I've…

Downloads
269
Likes
39
Rating
5
P
PrintablesAdam L

Shrine of Knowledge Bookends: Zelda Shrine Themed Bookends With Pencil Holder

I wanted to design a Zelda themed bookend for my wife who loves the legend of Zelda and books. When I found @KoalatyLegalGrey's pencil holder, I knew I had a great mesh starting point to modify into a book holder. While of course it…

Downloads
260
Likes
116
Rating
0
P
PrintablesNam N

Wemos D1 WLED Shield

It's a snap-fit enclosure for Wemos D1 Shield v3.0. This model requires 4x 2.5 self-tapping screws to hold down the pcb to the enclosure. https://github.com/srg74/WLED-wemos-shield You can also buy the board here:…

Downloads
253
Likes
41
Rating
0
P
PrintablesHans

Led Matrix 16 x 16 With Sound Reactivity, Powered By Usb Type C, Wled And Quinled Dig-Uno

This is my design for a minimalistic and clean 16 x 16 led matrix display with sound reactivity. It is designed to stand or to be hanged to a wall. BOM: printed parts 16x16 WS2812B RGB Digital LED Panel Flexible e.g.…

Downloads
253
Likes
63
Rating
4
P
PrintablesDon Bitcoin

Esp-32 wroom Case (38pin) For Wled

esp-32 wroom (38pin) case, with click backside. size inside case 55.34mm x 28.1mm size outside case 60.4mm x 31.2mm print description: Filament : PLA Color Changing Brown/Green Nozzle : 0.4 Layer : 0.2 Infill : 20% If you like it. let me…

Downloads
252
Likes
14
Rating
4
P
PrintablesHijinx

Meanwell LRS-100-5 + ESP8266 Enclosure for WLED Neopixel Strips

This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB. My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED…

Downloads
251
Likes
59
Rating
5
P
PrintablesJared Gudnason

Pixel Grid case for 16x16 matrix, esp32, wled

Second model published, but the first one i actually started to work on. Diffuser + box for a 16x16 pixel grid (available from BTF lighting). for the diffuser, first three layers are white PLA, then switched to black pla for the remainder…

Downloads
245
Likes
59
Rating
5
P
PrintablesChocolateNinja

WLED Housing (ESP32)

WLED Housing (ESP32) Category: 3D Printing

Downloads
243
Likes
31
Rating
0
P
Printablesdm1x

ESP32 C3 Supermini WLED Case

Added USB C Connector ( https://www.amazon.de/dp/B0CL9F34GT ), others may not fit!

Downloads
231
Likes
34
Rating
5
P
Printablesneotil

ESP32 NodeMCU Enclosure/Case for WLED

Warning: You won't be able to access the Micro USB port with this enclosure! I modified this housing to be quite a bit slimmer, but it still has enough space for a level shifter and a 24V to 5V step down module. That's why the opening for…

Downloads
224
Likes
88
Rating
0
P
PrintablesWilber

Square WLED lamp

Square wled lamp. Base has space for a Wemos D1 mini. Top needs to be printed in vase mode. I designed it to have the led tape spiraled up the centre, but I guess it's up to you how you want your leds. See https://kno.wled.ge/ for details…

Downloads
204
Likes
50
Rating
4.5
P
PrintablesRichard M

WLED Controller Box

Simple box for d1 mini for WLED The din mount is adapted from Voron Trident - https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/ElectronicsBay/pcb_din_clip_v2_x5.stl - GPLv3 Hardware - m2x10 (din rail) or m3x? fhs - m2x10 (box)…

Downloads
197
Likes
72
Rating
5
P
PrintablesHasenpups

WLED Housing

This is a housing for my WLED project. I used the following hardware: Power supply: https://www.amazon.de/gp/product/B07Q2VXDKT/ Aluminium profile: https://www.amazon.de/gp/product/B07PSN77DY LED Strip:…

Downloads
197
Likes
93
Rating
5
P
PrintablesVolan

WLED Indicator Light for Home Assistant v1.2

-------------------------------------------------------------------------------------------------------- Runs on USB-C (5v on everything) 45mm diameter. 30mm tall All parts prints solid Should be PETG or better, due to LED heat Base…

Downloads
195
Likes
110
Rating
4.67
P
PrintablesTyler Day

GamerLeaf WLED Project (Inspired Nanoleaf)

Introducing the extraordinary GamerLeaf STL files – a gaming-inspired marvel that's reminiscent of the iconic Nanoleaf system! With the power to illuminate your gaming setup like never before, GamerLeaf is here to take your gaming…

Downloads
193
Likes
81
Rating
5
P
PrintablesDynaMight1124

D1 Mini WLED Case

I wanted a small D1 Mini Case for WLED, just to power some short LED strips so didnt need external power etc. I found a few, but they didnt fit my D1 Mini, a lot were designed around the official Wemos version, mine is a cheap one with…

Downloads
188
Likes
21
Rating
0
P
PrintablesHands on Katie

Simple case for ESP 8266 powering WLED ring array

Part of this guide: https://handsonkatie.com/breathing-life-into-ornaments-the-smart-led-dragon/

Downloads
178
Likes
33
Rating
5
P
PrintablesFraat Ramski

Housing for ESP32-C3 Mini | WLED | Homematic | Home Assistant | Iobroker

https://www.amazon.de/DUBEUYEW-Entwicklungsboard-Unterst%C3%BCtzt-Bluetooth-Kompatibel/dp/B0DGX59RJL/ref=sr_1_1_sspa?crid=2FMGTPR13C9LW&dib=eyJ2IjoiMSJ9._6WPE5B0NSAQNibPocdHjnvEDqOUNGxKpGUZymeHsT3bXfWId2FqE1S7muhtKDkIEXgH8Tz0YYhvVbTOee_p8F…

Downloads
177
Likes
17
Rating
4
P
PrintablesDeimosfr

Minimal ESP32 case with DC connector for WLED

Print recommendations: 0.2mm layer height max size (prefer ≤ 0.1mm) 15% infill With support (only wholes are required) Tested on PLA+ Used components: ESP32 boards: https://fr.aliexpress.com/item/1005005953505528.html?channel=twinner DC…

Downloads
177
Likes
31
Rating
0
P
PrintablesCadriel

WLED Wemos Shield Case (pcb v3+)

A case for V3 of the WLED Wemos Shield. Takes inspiration from Serg's original cases. PCB Project can be found here: https://github.com/srg74/WLED-wemos-shield Should fit at the very least the basic configuration, plus the addition of the…

Downloads
173
Likes
16
Rating
5
P
PrintablesTravmac

ElectroCookie Prototype Board Case (ESP8266 WLED Project)

Case project for an ElectroCookie Prototyping board and barrel plug for small electronics projects. The case halves are held together using four #4-40x1/2inch machine screws. The holes are just large enough for the screws to tap into the…

Downloads
169
Likes
24
Rating
0
P
Printablesbmyonatan

Fan Light Replacement - WLED

The builtin LED light on my ceiling fan burnt out, so I designed and printed a replacement, that uses neopixels, a d1 mini and a 5v PSU to have RGB light control. Used same diffuser and light blocker from the original light, just replaced…

Downloads
167
Likes
6
Rating
0
P
Printablesdrathbone

ESP32 38-Pin WLED Case

Snug snap-fit case for an ESP32-WROOM 38-Pin devkit USB-C. Hole at the back for a cable (can easily fit a 5mm wide 3-core or anything similar). This was designed for a specific ESP32 board I got from Ali and couldn't find a nice fitting…

Downloads
164
Likes
6
Rating
0
P
PrintablesSpudd78

Funny Sign - Some People Drink Deeply from the Well of Knowledge, Others Just Rinse and Spit.

Another funny sign to add to my growing collection - “Some People Drink Deeply from the Well of Knowledge, Others Just Rinse and Spit”, multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs…

Downloads
158
Likes
51
Rating
5
P
Printablesminc

D1 Mini Case for WLED Projects with Capacitor and Resistor Compartment

The D1 Mini Case is a compact 3D printed enclosure specifically designed for the AZDelivery D1 Mini board. This case features a dedicated compartment to conveniently house an electrolytic capacitor and a 470 Ohm resistor, making it an…

Downloads
157
Likes
14
Rating
5
P
PrintablesSatellietje

Bitcoin glowing WLED 19 cm high

You are doing me a big favor by clicking the Like button :-) There is enough space in the bottom for a Wemos d1 mini and the cabling. Shopping list 21 x WS2812B RGB Led (AliExpress) 1 x Wemos D1 Mini V3.0.0 (AliExpress) Wire thin 30AWG…

Downloads
146
Likes
35
Rating
4.5
P
Printables2Mars

Housing for Wemos D1 mini ESP8266 - WLED

This housing is intended for the Wemos D1 mini microcontroller, in my case for short WLED strips (approx. 34 LEDs). https://kno.wled.ge/ The dimensions of the housing are 44 x 35 x 14 mm. The Wemos is simply plugged onto the printed pins,…

Downloads
145
Likes
23
Rating
5
P
PrintablesTDI4

WLED Desk lamp

I've seen a project like this in a Facebook group, and thought I need to do it on my own :) So I designed the lamp, and used other resources from @Aircoookie on GitHub: https://github.com/Aircoookie/WLED Things you need for the project:…

Downloads
144
Likes
55
Rating
0
P
PrintablesSatellietje

Glowing Wled heart

You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…

Downloads
142
Likes
40
Rating
0
P
PrintablesLee Roberts

Star Wars Inspired WLED Lamp

This simple wifi enabled WLED lamp is perfect for adding a bit of fun StarWars galactic aesthetic to your space. This lamp is a simple project using 2 24 LED WS2812b rings and an ESP32 microcontroller and is powered via usb. The case is…

Downloads
141
Likes
43
Rating
5
P
PrintablesDan Henriksen

Knowledge Book ends

Just a speed design to enter competition :-) Prints easy and can be scaled.

Downloads
140
Likes
25
Rating
0
P
PrintablesSatellietje

Glowing WLED Easter Rabbit

You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…

Downloads
138
Likes
35
Rating
5
P
PrintablesTigersmash

Neon Arrow Sign (Using wLED)

Introduction: This is a neon style sign (so not with actual neon gaz) that uses WS2812B LEDs with the wLED library so the neon sign can be controlled using wifi via the wLED app on your phone and you can use all the cool wled effects (for…

Downloads
136
Likes
30
Rating
0
P
PrintablesIan

Esp32 case wled usbC remix

Added usb-c cutout.

Downloads
136
Likes
16
Rating
0
P
PrintablesJulant

MagWLED-1 Enclosure w/ Power Button

I tried using the file on the MagWLED website for the power button model by ‘James’, but it had a lot of build errors when sliced. Unclear if the issue is the file or my download, but it doesn't seem to be published anywhere else to…

Downloads
134
Likes
10
Rating
5
P
Printablesspool2kool

esp32 box for wled

box for esp32. for use with WLED. Teyleten Robot ESP32-S3-DevKitC-1 (slots in). https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details ESP-WROOM-32 ESP32 ESP-32S (screw in).…

Downloads
134
Likes
18
Rating
0
P
PrintablesArchie

Fill your Skull with Knowledge!

Skull halves placed side by side look cool on your book shelf but can be slowly expanded with knowledge as bookends!

Downloads
134
Likes
81
Rating
5
P
PrintablesSatellietje

Big glowing wled or led heart

Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…

Downloads
131
Likes
19
Rating
5
P
PrintablesValentino Hesse

WLED lamp V.2

WLED lamp pro WEMOS mini D1 a programovatelný led pásek. A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!…

Downloads
131
Likes
45
Rating
5
P
Printablesalawljez

Wled Esp32 big case

Printoptions: 0.15-0.2 layerheight 10% infill Parts: https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details https://www.amazon.de/dp/B0C5D6H38S?ref=ppx_yo2ov_dt_b_product_details&th=1

Downloads
131
Likes
12
Rating
0
P
PrintablesSatellietje

Glowing Wled heart

You are doing me a big favor by clicking the Like button :-) This heart can be combined with the letters from my other project. https://www.prusaprinters.org/prints/109865-glowing-wled-or-led-all-alphabet-letters-and-all-n Shopping list…

Downloads
130
Likes
22
Rating
0
P
PrintablesMarius M

LED Clock - MICRO [ powered by WLED ]

Led Clock - MICRO (24x41mm PCBs) Smallest version of the LED clock project by @imeszaros. You can print this version even on a Prusa Mini :). For more details please check the github fork repository:…

Downloads
125
Likes
59
Rating
0
P
PrintablesRoman Kiprin

WLED + ESP32 Holder box with magnet lid

To be precise, it is the 3d model I created myself. All the geometry and ideas are mine. The inspiration is from Makers Mashup video: WLED & ESP32: The Dynamic Duo of DIY LED Projects . I took his entire project and added some…

Downloads
123
Likes
33
Rating
0
P
PrintablesIshai

WLED Simple lamp

To print the shades print with no top layers, no infill and 2 walls WLED Project

Downloads
122
Likes
52
Rating
5
P
PrintablesKasuki Kairen

Llavero Digimon - Emblema del conocimiento / Digimon's Knowledge emblem Keychain

Llavero inspirado en la serie de animación Digimon, con la posibilidad de imprimirlo completo o por partes para hacer cambios de color para esas impresoras 3D mas básicas. Keychain inspired by the Digimon animation series, with the…

Downloads
122
Likes
23
Rating
0
P
PrintablesSatellietje

Instagram Logo glowing wled or led

Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…

Downloads
119
Likes
21
Rating
0
P
PrintablesAnefecious

Custom Led Box - Easy Print - WLED

A sleek blend of 3D printing and smart LED technology. Effortlessly customize your space with vibrant WS2812B light strips, powered by the user-friendly D1 Mini. Enhance your surroundings with 3D-printed diffuser panels, making it a…

Downloads
115
Likes
39
Rating
0
P
PrintablesHasenpups

Housing for ESP32 WLED controller

This housing is designed for the ESP32 WLED Controller: https://github.com/Hasenpups/WLED_ESP32_Controller The housing is minimal and only requires 2 M3 screws. Big thank you goes to the designer of https://www.thingiverse.com/thing:5282811

Downloads
114
Likes
24
Rating
0
P
Printablesasoli.dev

ESP32 Enclosure with INMP441 mounting for WLED setups

An ESP32 enclosure for WLED setups with an optional housing for INMP441 I2S digital microphone for soundreactive-awesomeness. The ESP32 boards that I use are from AZDelivery ( Amazon Link ) The enclosure has snap-on cover and two design…

Downloads
112
Likes
14
Rating
5
P
PrintablesLilimah

WLED HexaLeS Lamp Remix with DC jack, power button and level shifter

This is a Remix of the HexaLeS Lamp by ErikState ( https://www.thingiverse.com/thing:5400473 ). The main hardware is a Wemos D1 mini running the WLED software and a led strip of ws2812b leds. I made some modifications to add a level…

Downloads
112
Likes
48
Rating
0
P
PrintablesPeter Jordan

ESP32 Mini Case (for WLED)

To hide the ESP32 for my WLED project I designed this case that fits for ESP32 Mini versions. I used an DC-Plug 5.6/2.1mm that comes from my Power supply, an XT30 plug to connect the stripe to the power, so that everything can be…

Downloads
112
Likes
16
Rating
0
P
PrintablesSatellietje

Simon's cat glowing wled or led

Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high. https://www.prusaprinters.org/prints/149829-glowing-led-and-wled-all-alphabet-letters-and-all- You are doing me a big favor by clicking the Like…

Downloads
109
Likes
34
Rating
0
P
Printablespollinho

WLED Hexagon Wall Lamp

Just a hexagon wall lamp Works with any 10mm wide LED strip, I use WS2812B's 60LEDs/m, but you could also go with FCOB-LEDs, SK6812s or whatever you fancy. You can create your own patterns or just copy mine. You'll need some 15mm x 2mm…

Downloads
109
Likes
61
Rating
0
P
Printablestrial_attorney

ESP32 case (WLED logo lid remix)

this is an optimized cover for ESP32 case for printing on multicolor printers (like Bambu Lab with AMS). I have optimized the WLED logo so that the logo does not sag during printing as it does on the original cover model. In addition, you…

Downloads
109
Likes
11
Rating
0
P
PrintablesHow To Homemade

Spiral LED Lamps | WLED Sound Reactive Hub

Assembly instructions for the spiral lamps To build these lamps, the following parts are required Part Link 5V 8A power supply https://www.amazon.de/dp/B00MWQF08C GX12 Connector (4 Pin)* https://www.amazon.de/dp/B07JPXV3BT WS2812**…

Downloads
108
Likes
44
Rating
0
P
PrintablesEldron

WLED Button Box

This box is for a nodemcu ESP8266 and three 16mm temporary buttons. The ESP runs both the MQTT broker and client. Pressing the buttons publishes to the wled/all topic to make changes. I use this in conjunction with my status indicator…

Downloads
106
Likes
26
Rating
0
P
Printableskrisztian96

FloWLED moodlight with WS2812B, adressable LED, WLED ESP32

IT IS STILL A WORK IN PROGESSS, it works, but i wish to add more improvements. I will continue as soon i will have time, i have just moved home after 3 years, there are more important things to get done around the house. Plus new…

Downloads
103
Likes
42
Rating
4
P
PrintablesSatellietje

Daf wled logo

You are doing me a big favor by clicking the Like button :-) How to program a Wled / Wemos https://www.youtube.com/watch?v=xIYOKvj4gPo

Downloads
102
Likes
13
Rating
5
P

Bambu Lab P1P LED Top Riser for X1 Glass Cover Plate (ESP8266 & WLED)

Thist is a LED Riser Top for the P1P which is designed to House the X1 Glass Cover Plate. After Printing the Bambu Lab P1P "Minimal" Enclosure + X1 Door I felt it a bit to open at the top. The Print: Everything exept the Top Parts are…

Downloads
102
Likes
41
Rating
5
P
PrintablesBen Engelen

RGB WLED Tube Light

Build your own cheap RGB LED Tube Light ! UPDATE : Step files added. This is a cheap version of a tube light using a WEMOS D1 Mini, for the tube i used a drainage pipe of 40mm made out of polypropylene it makes a great difusor. The LED…

Downloads
102
Likes
32
Rating
0
P
PrintablesVojtěch Kaláb

Light bar (WLED)

Stand for 1m aluminium led strip profile. You can put there WS2812B LED strip with wled. Inside the base is space for the electronics, in my case Wemos D1. Printed on Ender 3 V2 with 0.5 mm nozzle without supports. The size of the ALU…

Downloads
102
Likes
63
Rating
4
P
PrintablesErwin Hijdra

Quinled Dig Uno / Wled case Sliding top

A case for the Quinled Dig Uno by Intermit.Tech. Good project to DIY with digital adressable led's I use the board with WLED in combination with home assistant. Perfect combination.

Downloads
100
Likes
9
Rating
4
P
PrintablesSatellietje

Glowing WLED Easter Egg

You are doing me a big favor by clicking the Like button :-) Fits in the project Glowing LED and WLED all alphabet letters and all numbers 10 cm high.…

Downloads
100
Likes
34
Rating
5
P
PrintablesMjm

Wled Matrix

this is a case for a 16*16 adressable led Matrix . By using an esp32 you can use wled to controll it. there is enough space in the back to fit in the esp32 and a microphone for soundreactive effects. All parts are designed to be printed…

Downloads
100
Likes
28
Rating
3
P
PrintablesJonas J

WLED Case for ESP8266 1 channel relay module

A simple screw mountable case/box for ESP8266 1 channel relay modules (ESP-12F / See the model in the screenshot) with a clip on lid. I use these as WLED controllers. they work really well as the relay can be used to cut all power to the…

Downloads
99
Likes
8
Rating
0
P
Printablesnnmm

GLEDOPTO ESP32 Wled Box

This is a simple 3D printed box designed for a GLEDOPTO ESP32 WLED controller. The enclosure is a 2-part design (base + lid) : Screw-on lid using 4 corner screws for easy access and a secure close ( M2 screws ). Push button mount…

Downloads
98
Likes
9
Rating
0