35 models
LED Light: https://de.banggood.com/AMBOTHER-2PCS-Tri-ROW-4-Inch-9-32V-20-LED-Work-Light-Bar-Flood-Spot-Beam-Offroad-SUV-Driving-Truck-ATV-UTV-Boat-Fog-Lamp-Waterproof-p-1764193.html Attention: The lamp has no integrated undervoltage…
Print approx. €11.79–€14.41 excl. taxPreliminary estimate for one variant
This battery adapter lets you make a powerful worklight with your Metabo 18V tool batteries. You need: Suitable LED Light Small spring, ca. 5mm diameter, 10-15mm length. 5x M3x16mm screws for Case 1x M3x25mm screw for Lever Toggle switch…
Print approx. €11.60–€14.17 excl. taxPreliminary estimate for one variant
Why keep the room lights on when you just need to see the printer's bed? Add this easy-to-print lighting setup up and get lit! Snap-on lighting for a Prusa MK2 and possible MK3. Uses a 12v 17cm DRL (Daytime Running Light). Print…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for PETGSource material: PET
This model was inspired by this design by Spudinator ( Spencer Owen ). My design uses the same PVC trim from Lowes which is $7.31 at time of writing. ("Schluter Systems Rondec 0.313-in W x 98.5-in L Bright White PVC Bullnose Tile Edge…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This replaces the Harbor Freight 27 LED Worklight's 3 AAA batteries with a single 18650 and a charging board. I also removed the smaller 3 LED light because I never use that one. Materials: 1 micro usb charging / protection circuit - I…
This is a 70 watt "7000" lumen dimmable LED floodlight that mounts on anything that has a 1/4" or 3/8" thread. It's a standard thread used on all kinds of camera gear, like tripods, microphone stands, articulating arms, etc. Also has a…
Added a illumined logo to the model of Dan Cernogorsky . Printed the "Logo Transparent" in PETG clear (e.g.…
Parkside LED Worklight PLSA 20 Li A1 - it is little bulky, clunky, awkward when stored. Foldable legs solves that proplem! Also it can better illuminates from behind the edge. You need: 2 pcs - M4x20 screw (preferably flathead) 2 pcs - M4…
Heat Set Insert Press With this conversion kit, the Paulimot drill stand can very easily be converted into a melting helper for thread inserts. Never again crooked threads or missing hands. ;) The print can actually be made in all…
I neede a worklight for my IKEA Skådis pegboards so I designed this to fit over a 1m led diffuser channel. This fits 17,3x7mm LED-profile. (picture of profile in photos) You need 2 M4 bolts to assemble the joints. I have included the .f3d…
This is a stand for my **70 Watt worklight.** It's designed to take Makita batteries, but making an adapter plate for other 18V batteries like Dewalt, Milwaukee, Bosch etc. - is possible. A fusion file is available for a blank plate so…
Remix of Jerrari's excellent design, to hold the LED R18ALF-0 worklight. See my other remixes for variants to hold the circular saw and jigsaw.
This is my solution for wanting an overhead LED light that works with Multiboard. The files work as uploaded but this is still currently a work in progress. Functionally they are fine, aesthetically, and proper design/printing standards…
We upgraded our Fendt 514C Favorit with some nice looking LED worklights by mounting them at the front and backlights. Cables have already been preinstalled by the factory and are easy to find. Just attach the printed brackets and mount a…
I didn't like any of the lights available from Makita and didn't want to start down a whole different battery family in order to find one that I did like. I've also tried many of the various lights with built in batteries and have been…
I used the original arms with the multipoint mounting and designed different mounts for the LED light I bought. Per arm you need 2 x multipoints flush mounts (and (flush) snaps , too, probably) and 1 x M4x30 bolts, nuts and washers. In my…
Holder for worklight or other things with magnet or metal plate on the bottom to Honeycomb storage wall. This thing customizable throw OpenScad file. You can customize: - Plate dimensions: lenght, width, thickness - Plate shape: oval,…
These are mounts that can be used to attach a work light or lightbar to a ROP (roll over protection) made of 2"x2" square tube steel. They use M5 cap head screws (30 - 40mm) and nuts for assembly. Nuts fit into recesses in the larger…
Two worklight mounts. One for attachment to the grab handle on a 3038e and one to allow replacement of the original Hella worklight on a 1025R with some other type of worklight. The 3038e mount screw pockets were designed for use with 3mm…
Author : Volan Link : https://www.printables.com/model/10929-70w-dimmable-led-worklight-v14 Minor changes : I replaced the square nuts for fixing the bezel with hot inserts. I’ve reduced the housing for the square nuts so they can stand…
I suggest you to print the part where the working lights are attached to the side, this will require support but the print will be much more solid with 3 perimeters and 20% infill. The part where the battery is inserted can be printed…
I did not fully trust the printed loc line segments; that is why I created a clamp that uses two M3 screws with nuts to grip the end of a 3/4 loc line segment. The advantage of this approach, in my opinion, is that the printed parts are…
Author : Volan Link : https://www.printables.com/model/34758-stand-for-70w-worklight-v11 Minor changes : I added 2 screws and 2 square nuts to assemble the lock. On the bottom cylinder, I reduced the slots for square nuts. On the right…
This is designed to mount the Bosch GLI12V-300N Worklight (https://www.boschtools.com/us/en/boschtools-ocs/12v-max-lights-gli12v-300n-178350-p/) horizontally so that it shines down on a workbench. Either mount this to a wall or to a Slat…
(english below) (C) 2023 by Oliver Kuhlemann, cool-web.de Quelle: Oliver Kuhlemann, https://cool-web.de/3d-druck/ Die China-COB-LED von AliExpress mit der Aufschrift Worklight hat zwar einen starken Magneten im Fuß, steht aber auf nicht…
Replacement joint for repairing the "Worklight" LED lamp (Larger 18650 version). Individual parts may not be compatible with the original, the entire joint should be replaced. Recommended PETG/PLA, perimeters only.…
I like building led lamps, and so i decided to modify a 10w led floodlight to make it like a work light with a stand and all . there are 2 versions of the housing , one with premade holes and one with no hole , in case your lamp has…
Designed for use with outdoor floodlights like this (available in various wattages): https://www.amazon.com/gp/product/B0CCND2TFV?psc=1 These lights are designed for mounting on a wall, but they make good worklights when mounted to this…
Mounts for lightbar or worklights to be mounted on a ROP with approximate cross section dimensions of 53x79mm (or nominally 2x3"). These worked fine on my gen 1 (2010) JD 3038e tractor. Clamps will show a gap after being tightened around…
Gridfinity bin for Duracell 600 lumen LED work lights. This 3 pack is from Costco. Bin is Gridfinity 6 x 4 x 6. The 1 piece version for those with large beds. The 2 piece version has a 3 x ~3.25 and 3 x 2.75 pieces that you can just put…
This clip is designed to mount the Quantum 215 Lumen Worklight From Harbor Freight to the top of the Prusa i3 MK3S+ or any other Prusa with the same frame width. It clips around the frame to the left or right of the spool holder. I was…
This is a storage box I designed for this worklight set - https://myproduct.duracelllights.com/products/1500-l-3-pack-worklights It fits all 3 light in snugly. I made mine out of PLA as I keep them in my house. If you keep them in an area…
A simple modification to BigDumb's clamp mount. I just added a hole to allow a power wire routed through the loc-line to exit through the clamp.
This battery adapter lets you make a powerful worklight with your Metabo 18V tool batteries. You need: Suitable LED Light Small spring, ca. 5mm diameter, 10-15mm length. 5x M3x16mm screws for Case 1x M3x25mm screw for Lever Toggle switch…
Print approx. €11.60–€14.17 excl. taxPreliminary estimate for one variant
This is a storage box I designed for this worklight set - https://myproduct.duracelllights.com/products/1500-l-3-pack-worklights It fits all 3 light in snugly. I made mine out of PLA as I keep them in my house. If you keep them in an area…
