Search results: xtra

Sort order

Counting matching models…

P
Printablesstiaro

Minimalistic Solder Fume Extractor

Introduction Minimalistic solder fume extractor with 120mm fan and two active coal filters. Easily prints in three separate parts and slides together into a space efficient and sturdy package. The bottom is fastened with two countersunk…

Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,508
Likes
467
Rating
4.54
P

Hextraction Board for Small Build Plates (148x153)

Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
831
Likes
68
Rating
5
P
PrintablesFPacheco

Vase mode stackable HexTray (60 mm hexagons)

This print require to modify some slicer parameters, G-code for Prusa MK4 and MK3S+ is provided, if you need to slice this model for your printer please, follow the instructions step by step. More model variations and 70mm size coming…

Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant

Downloads
700
Likes
188
Rating
5
P
Printableseyalshtark

Extra long vortex tube and ball

A very long vortex tube with spinning ball. Printed to the height limits of the Prusa MK4. No supports needed for the tube, only a brim. Supports needed for the ball. Lower the print speed to 70- 60% for the top third of the vortex tube.…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
444
Likes
46
Rating
4.6
P
Printablesartsef

120mm & 140mm Fan Fume Extractor - Large Scoop

After years of trying to avoid solder fumes I found it time to design and print my own extractor arrangement. Initially the idea was to produce a desktop located unit, but due to space restrictions and consequent positioning issues, I…

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
433
Likes
95
Rating
5
P
PrintablesMr52

Perfume Extractor

Do you need a way to easily get perfume out of its original bottle? Than this simple print is for you. It's a simple adaptor for a perfume bottle that uses the vacuum created by a syringe to extract perfume. I have a nice travel bottle…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
396
Likes
45
Rating
0
P
PrintablesExtra Fox

Solder Fume Extractor Fan

This is a soldering fume extractor fan I designed heavily inspired by work by the user koensmelt who was in turn inspired by sneakypoo over on Thingiverse. The biggest difference with mine is the size. This is intended to mount a 12v 80mm…

Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
392
Likes
125
Rating
4.8
P
PrintablesAntro

DJI mini 2 (Mavic mini 2) battery extractor

There are two options: simpler, thinner version bit bigger v2 with small grips for more comfortable use I recomend to print without supports but enable all option showed below You probably should print it with supports if you want make…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
71
Rating
4.4
P
PrintablesChristianR

Solder fume extractor

Simple but effective solder fume extractor. Print instructions Additionaly to the 3D printed parts you will need: 1x Fan 80mm 1x activated charcoal filter 130mm x 130mm x 10mm 4x M3x30mm screws 8x M3x18mm screws with flat countersunk…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
326
Likes
51
Rating
4.67
P
PrintablesTrachtorBeam

Skadis Hook (Extra-Small Shelf)

Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters and infill 50%. Part is thin, so infill 15% will be fine. But, higher infill…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
236
Likes
26
Rating
5
P
Printablesgrtych

V3 KE Nebula Pad Relocation - Extra Stiff Support

The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…

Print approx. €3.21–€3.93 excl. taxPreliminary estimate for one variant

Downloads
223
Likes
24
Rating
0
P
PrintablesJonLB

Maxtrax Pin Wrench

A simple wrench to help turn the locking pins for Maxtrax mounts. Print instructions You have two options: Use the pre-sliced G-code Slice it and use the following settings**: Print settings: 0.15mm QUALITY Filament: PETG Infill: 30%…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
194
Likes
11
Rating
0
P
Printableszuberio

Vase Mode 120mm Fan Solder Fume Extractor

I wasn't satisfied with the other 3D printable designs out there for a 120mm PC fan based soldering station fume extractor fan. I felt they'd take too long to print and/or use too much plastic. Thus, I decided to leverage some of the…

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
37
Rating
4.5
P
Printableseponra

FanProject - another soldering fume extractor with a MacPro-grill

TL;DR first: This is very taxing on your printer! The mesh consists of a lot of intersecting shapes, and so this means a lot of movement and retractions. Be advised that you should make sure that your printer is maintenanced properly.…

Print approx. €12.55–€15.34 excl. taxPreliminary estimate for one variant

Downloads
175
Likes
47
Rating
4
P
PrintablesBM

Extra-wide lens hood Canon EW-73D alternative

The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant

Downloads
170
Likes
12
Rating
0
P
Printablesea69

Parametric Solder Fume Extractor

Designed this simple solder fume extractor reusing an old DC fan. Purchased some activated carbon filter material from amazon and cut it to size. Many filter options exist and the filter can be deleted if desired. The .stl files are for a…

Print approx. €6.40–€7.83 excl. taxPreliminary estimate for one variant

Downloads
162
Likes
26
Rating
5
P
Printablesnaxxfish

Safety Razor Stand with Hexagons - Extra Chunky Edition

This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
14
Rating
5
P
PrintablesoXiVanisher

Tamiya Square Bottle Stand (extra thin cement or panel liner)

This is a simple stand for up to two Tamiya square bottles like the extra thin cement or panel liner. After spilling my bottle twice and ruining the pretty grid on my cutting mat, I designed this. 😅

Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
17
Rating
5
P
Printableseponymous

Mooncat Nail Polish Extra-Stable Holder

This started as radical_rascal 's single-bottle polish holder (originally on Thingiverse ; reuploaded here ). I personally felt I could too easily knock over the single-bottle holder, but the multi-bottle holders were too crowded to…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
13
Rating
0
P
PrintablesTeraflop

Extra Holidays and Holder for Disney Countdown

The models contain additional holidays to be used in the Disney countdown. A holder is also included for storage. Thse holidays are: 4th of July Labor Day New Year Memorial Day Anniversary Celebration Halloween Teddy Bear Easter St.…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
116
Likes
94
Rating
0

1982-1992 Camaro EXTRA THICK Headlight Adjustment Base - plus various other GM Vehicles

EXTRA THICK Headlight adjustment base for various GM vehicles. Some vehicles have worn out adjustment base holes, this will have with some of that. Made these to fit my specific needs on a 1992 Camaro. Printed with Glow-N-Dark ABS,…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
93
Likes
14
Rating
0
P

Extractor for Fox Racing Shox Lower Leg Bushings

This is an Extractor for Fox Racing Shox Lower Leg Bushings. There is the video that explains how to use it! This version works well with 32mm forks. I don't know if it will work with the stepcast version. Printing it in pla (100% infill)…

Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
9
Rating
0
P
Printablessammythesquibb

Dyson V7, V8, V10, V11, V15 dust extractor adapter Fein 35 mm

I wanted an adapter for Dyson accessories that would fit a dust extractor with a 35 mm hose. There wasn't one, so I remixed an existing model from Printables. I have a Dyson V7 but I believe the connections up to V15 are interchangeable…

Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
9
Rating
0
P
PrintablesAWSW

IKEA “Jerker” rail extensions for extra storage

I still like my old IKEA “Jerker“ writing desk with its rails and extra boards to put things on. But as always you never can have enough storage. Yes the desk is not the nicest, but I could not find a better one that can keep so many…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
7
Rating
0
P
PrintablesCrocmagnon

Soldering smoke extractor

To combine with a 120mm USB fan and a 120mm charcoal filter.

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
22
Rating
0
P
PrintablesSYNCPRINTING

Classic Christmas Cracker: Gcodes and Extra Versions

Hello,,, Here we have more versions of our Festive reusable Christmas Cracker

Print approx. €19.27–€23.55 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
5
Rating
0
P
PrintablesJimleeQ

Gridfinity 4x2 Breadboard holder with extras

My version of a breadboard holder for the amazing gridfinity system, as I wanted to use gridfinity to organise my whole electronics prototyping space. This bin has space for a 830-hole breadboard (JUST fits..), and a range of bits in a…

Print approx. €6.22–€7.61 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
10
Rating
5
P
PrintablesSica

Solder fume extractor easy print

Introducing the " EyeSaver 3000 " – the superhero of soldering companions! Picture this: you're busy soldering away, and out of nowhere, those pesky fumes start playing havoc with your glasses. Fear not, for the EyeSaver 3000 bursts into…

Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
18
Rating
0
P
PrintablesAudunS

ExtraFinger

When you do not want to touch: Don’t want to use your hand to touch surfaces like the ATM pin numbers or the elevator button? Use the «ExtraFinger» to tap! Remove lid and tap the buttons, When done put the lid back on without touching the…

Print approx. €0.81–€0.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
43
Likes
1
Rating
0

4028 Fan Housing for use as air extraction system

Most instructions etc in the “Extractor #2” text file. It's a housing to put a small PC/server fan inline in 32mm pool hose for use in extracting fumes from a printer cabinet or solder hood.

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
41
Likes
10
Rating
0
P
PrintablesRoman Nejedlý

Reducer for dust extraction for Extol ESB1010.

Reducer for dust extraction for Extol ESB1010. This end cap ensures the removal of dust particles from the machine. It reduces the outlet from the machine base to a 30mm hole for a flexible hose that is connected to the extraction (e.g.…

Print approx. €2.88–€3.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
28
Likes
0
Rating
0
P

Bergeon 6767 + 2 extra

Bergeon 6767 plus 2 extra tool

Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
5
Rating
0
P
PrintablesTurboultra

Bevel box, extra wide

When repairing some rotten boards, I needed to cut a bevel to a specific depth on the new wood to make a strong joint. Having difficulty getting a plunge saw lined up correctly I decided to make the cuts by hand. This box prints in two…

Print approx. €18.74–€22.90 excl. taxPreliminary estimate for one variant

Downloads
23
Likes
1
Rating
0
P
PrintablesSimon

Modular Solder Fume extractor

This is a simple modular solder fume extractor using readily available parts and minimal soldering. It is powered via USB-C and has a speed controller. BOM I got my parts from Amazon Germany, but they should be available everywhere on…

Print approx. €1.89–€2.30 excl. taxPreliminary estimate for one variant

Downloads
19
Likes
7
Rating
0
P
PrintablesRanchBear

Wyze Lock Adapter - Orange - Extra Tall n Thick

Original adapter piece was too short for the lock+handle combo that I had. Previous designs that copies the original pieces lasts around a year before they eventually crumble so here is a ultra beefy version that outlasted previous…

Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant

Downloads
17
Likes
0
Rating
0
P
PrintablesStonyMtn

Makita 18v Sander to Bosch Dust Extractor

I made an adaptor from my Makita 18v to my Bosch Dust Extractor. I made it in PETG with 20% infill and it has worked great.

Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
3
Rating
0

Teka Fan Extractor Grid Holder

Grid Holder for Teka Fan Extractor. Used to replace a broken original piece.

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
0
Rating
0
P
PrintablesGizmo Goody

MagDuct Parametric Fume Extraction Nozzle and Screen

Motivation See here for a full explanation of the MagDuct system. This accessory provides a way to connect an open-air fume extraction nozzle to a MagDuct compatible ducting setup. Solution This design achieves the following objectives:…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
PrintablesREMLURELMI

Multimeter Strap Lead holder with Extra Fuse Storage

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 mm or less Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Brim: Optional

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
3
Rating
0
P
Printables3D_Flexseeds

[Official Remix] Flexi Extra Size Cat (Print-in-place)

[Update] ---2025/01/21--- Ultra size cat released!! It is about twice as long as Extra size and looks like a dragon, so looong! This is a super long version of “Flexi Holding Cat” which was previously released. Since there were many…

Downloads
22,533
Likes
3,066
Rating
4.97
P
PrintablesEndK7

Glorious Baby Dragon - Extra Long version

I'm very excited to introduce you to the new and extra long Glorious Baby Dragon! Longer Dragon = more Fun! It has so many articulated parts, so amazing! Length: 93cm / 36,6Inch Luckily, I arranged the parts to use as little printing area…

Downloads
12,378
Likes
1,526
Rating
4.96

Extra Large Dragon Egg with Threads - (300 percent scaled version)

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . After much trial and error, I…

Downloads
9,699
Likes
1,438
Rating
4.91
P
PrintablesLongMarch9

Dummy 13 extra arms backpack

Also comes with a stand adapter on the back, should be easy enough to delete if it's not desired. ========== Added 200% version (remember to scale up) and stackable version for whatever reason ========== Added reinforced version to fix…

Downloads
9,051
Likes
2,125
Rating
4.86

Extra-long Snake with Scales

By popular demand, here's a really long version of the Articulated Snake with Scales. How long is it?!???? I don't know, I haven't printed it yet. :) Someone print this and let us know how long it is. I'm guessing it'll be close to 6'…

Downloads
8,685
Likes
498
Rating
5
P
PrintablesMakers Manual

Flexible Hose for Dust Extraction

Designed to seamlessly integrate into your workshop, the clamp has a 35mm hole on both ends to suit a standard shop vacuum hose end. If you choose not to use the clamp, then I have included an adaptor to convert from flexi hose directly…

Downloads
6,587
Likes
2,274
Rating
4.9
P
Printablesquibeck

Hollow Flying Ring - Long Distance Spiral Toy (extra rotation!)

How to throw? : Grip the object exactly like a soda can and toss it just like a football, making sure the heavy ring points forward. Check out the example above for guidance. To get a smoother flight, snap your wrist gently as you let go…

Downloads
5,608
Likes
1,028
Rating
3.44
P
PrintablesPeterH1500

100mm / 4" Truncated & Full-Size Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…

Downloads
5,148
Likes
843
Rating
4.85
P
PrintablesChris Borge

Kirby 40mm Fume Extractor

Update: 26/04/2024: Added a STEP file as much requested. Kirby sucks So do fume extractors Its kinda a no brainer Almost entierly printed aside from the filter and fan Update 1: I forgot to mention, some models of fan will requite around…

Downloads
3,993
Likes
2,217
Rating
4.87
P
PrintableseCrowne

4.7L Mini ITX case, easily printable (2 major pieces), sandwich layout, no extra thread inserts, standoffs or feet required

This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…

Downloads
3,977
Likes
589
Rating
5
P
Printableslewosh

Heavy Duty Battery Powered Solder Fume Extractor

Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…

Downloads
3,594
Likes
2,974
Rating
4.81
P
Printables3D_Flow

Pokémon Bead Set – Starter + 2 Extras

💥 Pokémon Beads for Every Fan! 💥 Bring your favorite Pokémon everywhere with this fun set of Pokémon-themed beads ! Designed to slide onto cords, laces, or keychains, these adorable prints feature: ✔ Starter Trio: Pikachu ⚡, Squirtle 💦,…

Downloads
3,251
Likes
1,357
Rating
4.89

33 inch crystal dragon extra flexi rustic

This is my next dragon. A few of the other ones I made were not very flexible, so I made this one extra flexible. When printing on an a1 mini, you can make this 33 inches. I haven't tested this, so if you print a dragon max size on a…

Downloads
3,185
Likes
430
Rating
5
P
PrintablesRossero

Single Extruder - Multi Color - Easter Eggs (Extra Twist)

This is my 2025 iteration of my multi color slide together Easter Eggs! But this time with an extra twist One has an extra color added and the other is one of my previous designs that now twists together instead of slides together! Here…

Downloads
2,851
Likes
634
Rating
4.81
P
Printablesdaver18qc

1/10 Scale MaxTrax MKII Traction Board

These are a copy of the MaxTrax MKII traction boards, for 1/10 scale crawlers. 145mm long X 42.5mm large X 6mm high. Comments and suggestions are welcome ! * UPDATE : I uploaded V2 which has the little traction losanges 0.28mm higher for…

Downloads
2,671
Likes
348
Rating
4.96
P
Printableshexvolt

PolyDryer Extra Desiccant Container

Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…

Downloads
2,545
Likes
446
Rating
4.96
P
PrintablesBONK BOY

MP5 and MP5K for Carbon/Dummy 13 Beta + V1/extra (Foregrip, Skeleton stock, Stock, Drum mag, etc) gun

The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…

Downloads
2,516
Likes
586
Rating
4.86
P
Printablessdaendi

Tilt-lift table with fractal vice (100% 3D printed no extra parts required.)

The height of the lift table can be adjusted with the lower wheel, the angle with the middle wheel and the Fractal Vise can be tightened with the upper wheel. Print Settings & Quantity: I printed everything with a layer height of 0.2mm.…

Downloads
2,324
Likes
1,305
Rating
4.89
P
PrintablesKajasX

dust and sawdust extraction module for DeWalt milling machine DCW600 DCW604

Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…

Downloads
2,175
Likes
381
Rating
4.94
P
PrintablesRandom-name

extra arms for dummy 13

please leave a review if you like this model and let me know if what you would like me to make next

Downloads
2,174
Likes
414
Rating
5
P
PrintablesCap'n Corny

Extra Arms / Assault Cannon Backpack for Dummy 13

A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…

Downloads
2,099
Likes
472
Rating
5
P
PrintablesHDz_designs

Sherpa "Extra" Heavy with NEMA17 (Update 2)

Update 2: Optimized design in CAD + Improved some structural rigidity. (23-06-2024) Thank you Annex Engineering for creating a very fine extruder in the beginning. Check them out: Sherpa Heavy All standard from the Sherpa Heavy…

Downloads
2,018
Likes
309
Rating
5
P
PrintablesIdea2Item

Magnetic Dust Collection Connectors Set for Dust Extraction

Hello, This was definitely not my idea, but what was available didn't quite suite my needs so I completely redrew a set of my own with some upgrades and went a bit crazy haha! This design is based on 3x10mm round magnets (Amazon afilliate…

Downloads
1,997
Likes
352
Rating
5
P
PrintablesHugoWhite

Dual-Filter Solder Fume Extractor: H12 HEPA & Carbon Filter | AC/DC/PD | No Supports

Featured in 3Printr.com ! When soldering, it’s crucial to protect yourself from harmful fumes. That’s why I designed this fume extractor—not only to redirect fumes but to completely remove them from your workspace, ensuring clean air for…

Downloads
1,994
Likes
1,295
Rating
4.94
P
PrintablesPeterH1500

100mm / 4" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…

Downloads
1,984
Likes
380
Rating
5
P
Printablesjs500

Insert / Organizer for Earth Board Game - Also Holds Kickstarter Extras

This is an insert / organizer for Earth, including the Kickstarter upgrades (wooden soil tokens, wooden leaves, wooden active player token, and calendar cards). It all fits in the base box, has no lid lift, supports premium sleeves on the…

Downloads
1,932
Likes
277
Rating
4.97
P
PrintablesEndK7

Dragon Axolotl V2 - Extra Long version - Print in place

Here it is! A brand new extra long version for you: Dragon Axolotl V2 – 73 cm / ~28.7 inches long 🦎🐲 Longer Dragon = more Fun! It has so many articulated parts, so amazing! Features: 👀 Separated eyes version 🪽 winged version 🎨 colored 3MF…

Downloads
1,792
Likes
223
Rating
5
P
PrintablesHitMxrker85

Funnels (Extra Small, Small, Medium, Large)

A simple funnel. (Credit to my friend for printing these on his ender for the picture)

Downloads
1,791
Likes
693
Rating
4.92
P

Gridfinity Bin with Printable Label by Pred (parametric) with extra Margins

This model is based on the fantastic Gridfinity Bin with Printable Label by Pred . This has quickly become my go-to bin for organizing my hardware. I found that these print great on a modern printer. On an older printer that is not as…

Downloads
1,740
Likes
654
Rating
5
P
PrintablesPeterH1500

63mm / 2½" Ball Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…

Downloads
1,711
Likes
376
Rating
5
P
PrintablesTdub415

Lack Enclosure Extra Table Connector

Print 4 of these to add a third table to the bottom of a lack enclosure, for additional height. I have lowered the overall height the legs will stand on by 12mm, and removed the slots for acrylic sheets from the original design. Print…

Downloads
1,711
Likes
198
Rating
4.86
P
PrintablesJared

The Better Pistachio Opener and Extractor Tweezers - Updated v1.1

Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…

Downloads
1,701
Likes
230
Rating
4.79
P
PrintablesChris Borge

Model 302 40mm Fume Extractor

*will update more in morning its 3am im going to bed Introducing the Models 302A and 302B mini fume extractors. A more serious alternative to my kirby fume extractor, these mini fume extractors are perfect for all your small project…

Downloads
1,675
Likes
543
Rating
4.83
P
PrintablesTeppetuary

Gridfinity Ziplock, Wrap, and Kitchen Extra Containers

I organized my kitchen consumables drawer to make sense of all the mess using Gridfinity! I added dovetail lids to Gridfinity tubs, to allow for easy refilling of the ziplock and wrap containers. For the wrap containers, I designed them…

Downloads
1,646
Likes
544
Rating
5
P
PrintablesPrzemo-c

DJI Mini 2 / DJI Mini 4k Battery Extractor

It makes it easier to remove the battery. Especially helpful if you're using gloves or after flying you don't have much feeling in your fingertips :-) Added version with a pocket clip. Makes it easily accessible and easier to organise in…

Downloads
1,578
Likes
264
Rating
4.79
P
Printablesthtechnician

Gear Shifter Fidget Keychain (no extra components)

Some assembly required - Glue piece 1 on the bottom of the main body. USE ONLY A FEW DROPS ON THE PERIMETER, do not stick to the spring. Superglue/Cyanoacrylate works fine. Glue piece 2 onto piece 3 (There are a couple of divots to help…

Downloads
1,565
Likes
58
Rating
4.71
P
PrintablesSunny Galeas

Ender 3 V3 SE/KE Side Spool Holder. Less gantry wobble. Extra Support Clip

I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…

Downloads
1,500
Likes
175
Rating
5
P
PrintablesBuildX

#0073 xRivets for Original Prusa Enclosure OPE (Extra Rivets / Plugs)

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…

Downloads
1,462
Likes
441
Rating
4.95
P
Printablesdr.dentz

Soldering fume extractor for 120mm fan

This is a simple soldering fume extractor. It uses an active carbon filter commonly found in hardware stores and used also in your kitchen fume hood or in cat toilets. The design is quite simple, no need for screws or anything else. All…

Downloads
1,415
Likes
264
Rating
4.9
P
PrintablesNinja3dPrinting

Hextraction Set

Build-able marble racing !!!!!! Saw an Upload from A.Fool for his own modded tile which led me to find this, Without A.Fools tile i wouldn't have seen this , for that reason i'm uploading it here for viability. All models here were…

Downloads
1,283
Likes
217
Rating
4.77
P
Printablescoreyzev

Elegoo Centauri Carbon 1 ver2 Filament Sensor Offset (no extra parts)

All of the sensor offset mounts I could find were based on the original Elegoo CC design with 2 screws. Lots of people now have the one w/ a flap and 1 screw, including myself. So i made one. Only tool you need was provided w/ the…

Downloads
1,279
Likes
148
Rating
4.92
P
PrintablesPeterH1500

100mm / 4" Butterfly / Throttle Valve Type Non-Clog Blast Gate for Workshop Dust Extraction Network

Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…

Downloads
1,270
Likes
238
Rating
5
P
PrintablesMatthias

Dust extraction for Milwaukee angle grinder M18 FSAG

Designed to clip onto your existing disk guard. Stays in place with friction/clamping. Will fit most Milwaukee battery powered angle grinders (I use it on an M18 FSAG model). Keep in mind that even though my printed version has a strong…

Downloads
1,265
Likes
270
Rating
4.5
P
PrintablesVreter

Super Spinning Top (spins extra long)

The Super Spinning Top is designed to spin longer, smoother, and more satisfyingly than your average desk toy. Its wide base and low center of gravity reduce wobble, while a finely pointed tip minimizes friction for maximum rotation time.…

Downloads
1,213
Likes
136
Rating
4.67
P
PrintablesNadir @ CN3D

SV08 CN3D Shroud V3 Extra : Fan, Magnets Klicky + LED

Later update: 03.september.2024 This is and Original model Based on the Klicky probe made by jlas1 all credits to his work for the macros and idea. and for the contributors. We have adapted his work to our design. Please if you like his…

Downloads
1,206
Likes
202
Rating
4.89
P
PrintablesSteven Barker

QIDI Q2 Foot support with extra clearance

Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…

Downloads
1,198
Likes
133
Rating
5
P
PrintablesTestoMane

Fake Dice - always six (with extra weight) - Rigged Dice V3

A rigged Dice V3.0. Fully new Version with Sphere as Base Model, like a real Dice. 4 different versions: one without weight on a specific side (Rigged Dice V3.0 - hollow) one with a weight → so 6 gets rigged (Rigged Cube V3.0 - rigged)…

Downloads
1,195
Likes
106
Rating
4.71
P
PrintablesJace1969

Dead Trooper Helmet Extra Large

You can how ever download different versions from here if yo dont want a full size model https://www.thingiverse.com/thing:2423889 and https://www.thingiverse.com/thing:2437223 and https://www.thingiverse.com/thing:2442198 and…

Downloads
1,149
Likes
489
Rating
4.75
P
PrintablesLoboCNC

Extra Supple HexMaille Fabric

This thin hexagonal chain maille consists of hexagonal tiles held together by little cuffs at the edges. It is very flexible in all directions. The tiles are 13mm across the flats and are only 1.8mm thick. Print using a 0.2mm layer height…

Downloads
1,129
Likes
288
Rating
5
P
PrintablesBP3D

Reusable Dental Floss Pick Kit Card (Extra Strength) (1pc & 6pc)

Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.

Downloads
1,082
Likes
468
Rating
4.75
P
Printablesncsandor

Japanese Style Candle Holder with Extra

Update #1 I fixed the hooked top, so now the small sticks snap in properly, and I added a "candy" looking side panel. If the tolerance of the printer is not accurate enough, cut 0.2 mm from the top of the side panels. On the other hand,…

Downloads
1,076
Likes
711
Rating
4.57
P
PrintablesJGFTW

Press Fit Pulley Extractor for Nema 17

This model is inspired by Jake_of_all_Trades Pulley Extractor (https://www.thingiverse.com/thing:3593964) but with changes: fillets added (for removing failure point when using excessive force) chamfer added (removed sharp edges for…

Downloads
1,055
Likes
92
Rating
4.31
P
PrintablesVinark

Solder Fume Extractor - With Magnetic Cover

I wanted to design a fume extractor that had a rechargeable battery and had a modular design if you want to quickly swap filters and such. I also wanted it to have relatively simple electronics inside, so people with less advanced…

Downloads
1,011
Likes
1,030
Rating
4.94
P
PrintablesMagicShrimp

Extras for 270 degree hinge

Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…

Downloads
1,004
Likes
104
Rating
5
P
Printablesjdriscoll

Solder Fume Extractor (120mm fan)

Another fume extractor. I looked at what was available and made my own. I took the idea of a slotted housing for the filter from another design and then built that and everything else around the fan body. Fitting the wiring into the…

Downloads
993
Likes
180
Rating
5
P
PrintablesEndK7

Spiky Mountain Dragon - Extra Long Version

Here comes the brand new spiky mountain dragon - extra long version🐲!!! This little buddy is very articulated and it's really a lot of fun to make him wiggle✨. Again you will get a separated eyes version and pre painted versions (bambu…

Downloads
984
Likes
73
Rating
4
P
PrintablesVyrCZ

Extra hands for Lucky 13

Has the same size as the original hands. No supports needed.

Downloads
982
Likes
244
Rating
4.67
P
PrintablesThreeD-Michael

Extra long Shower Shelf for Shampoo and Soap

This is an enlarged version of my “Sturdy Soap and Shampoo Dish” with more room for shampoo bottles and soap bars. Inside dimensions: 156 x 76 x 22 mm. There are versions for 18, 20, 22, 25 and 28 mm shower rails. Assembly: Please follow…

Downloads
977
Likes
193
Rating
4.95
P
PrintablesUntangleWORKS

FGC9-MKI MKII UNW EXTRACTOR

read the PDF manual for more details. but with these tools and instructions should it not be that hard to make your own extractor for the FGC9 platform. it also includes a section about clearing malfunctions

Downloads
974
Likes
13
Rating
0
P
PrintablesReuben Ress
Downloads
955
Likes
249
Rating
0
P
PrintablesErikjuh

Carpet extractor attachment for Kärcher wet/dry vac (35mm)

An attachment to use with a shop vac with a 35mm nozzle (eg Kärcher, but possibly others), useful for wet cleaning carpet and upholstery. The attachment area is conical so it creates a snug fit. Print with 100% infill, this needs to be as…

Downloads
947
Likes
100
Rating
4.88