29,083 models
I saw some of the toothpaste tube squeezers and thought there's room to improve. So here's brief description of this ratchet toothpaste tube squeezer: ratchet mechanism ensures the tube doesn't unwind no supports just 4 parts which clicks…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any.
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
The containers are in sizes 5x5 / 5x10 / 5x15 / 5x20 / 5x25 / 10x10 / 10x15 / 10x20 / 10x25 / 15x15 / 15x20 / 15x25 / 20x20 / 20x25 / 25x25 / 30x5 / 30x10 / 30x15 / 30x20 / 30x25 / 30x30 cm. All are available with a smooth, designed…
If you don't have a 3D-printer you can buy a set of 3 pcs printed here → Buy it here! The cable organizer is designed to fit all standard USB type cables with a diameter of 3-5mm. 2 slots for 2mm cable. 2 slots for 3mm cable. 2 slots for…
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
Most of the packets for my kitchen/baking needs come in standard sizes. So I quickly drew up a model to store them in my cabinet. (The compartments are 65 mm x 20 mm each in clearance and 60 mm deep. If your packets differ, you can simply…
Simple but very usefull cable organizer for your cables. I was inspired by other clips in database but all clips are unsatisfying for me. For ex.: 1) Too big spaces and cables leave the clip. 2) Too long clip and unnecessary wasted…
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
This model is a remix of the original “Catch-All Trays / Desk organizer” model. It is fully compatible with this remixing model and it can also be stacked on top of the original remixed model. The containers are in sizes 5x5 / 5x10 / 5x15…
Wind. Store. Go. Keep your charging cables neatly wound in a reusable organizer with a textured outer grip. Choose Large or Mini, with an open-bridge Mini option for larger connectors. Easy winding: a broad spool plate gives your fingers…
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
Toothpaste Tube Squeezer made by "My 3d Prints" This is a remix of Toothpaste Tube Ratchet Squeezer by Jakub_Matula
This simple and efficient 3D-printed toothpaste squeezer 🦷✨ is designed to help you squeeze out every last bit of toothpaste with ease! Features: ✔ Super Fast Print – Ready in just 12 minutes without calibration! ⏳🔥 ✔ No Hassle – No need…
Honeycomb shaped organizer Outer dimensions: width: 169mm depth: 152.5mm height: 102mm Max object size: Round: up to 47mm diameter flat: up to 52mm width (spatula…) Wall thickness: 2.5mm Featured in Prusa's Weekly Prints #54
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
This pencil organizer that's also a giant functional nut and bolt – size M80, to be exact. Interior dimensions: 69mm (diameter) x 107mm (height) External dimensions (WxDxH): 100mm x 114mm x 110mm I found that this was a nice size, both…
Overview Toothpaste squeezer to help get that last bit of toothpaste out of the tube. I've personally printed a couple for around the house. I've even had one get warped after going through the clothes dryer but it still gets the job…
Simple remix of @spidersky1489 toothpaste squeezer to open up the hole a bit to allow it to hang and added another slot to thread the tube back to keep it from slipping out while hanging. Added bonus of the double slot is it keeps the…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Check my newest version of this squeezer https://www.printables.com/model/1832705-ratchet-toothpaste-tube-squeezer Features Fits larger tubes More comfortable to use Much easier to load Print instructions Print settings : 0.20mm…
<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…
ZeroG Astronaut, printed for fun or serial videos for the Mercury One! Recommended settings: 10% infill 4 Perimeters 4 top/bottom layers
This a simple cable organizer that is designed to be screwed into place. Designed to be printed without support. ------------- UPDATE: In celebration of passing 100 downloads in one month I decided to give this model some love, so I have…
Wire / cable organizer, easily install and remove cables. One version accommodates 2 sided adhesive tape for mounting on any surface. A second version with screw holes for fastening down a more secure mount. This model is easily scalable…
I created the stackable version of my Organizer/Basket for Drawer at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High Profile 204.0 124.5 117.5 Standard Profile 60.0 Low Profile…
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
For bigger cabels: https://www.printables.com/model/1203677-gridfinity-cable-organizer-big-cabel-2x3 this is inspired by: https://www.printables.com/model/274250-ikea-alex-cable-organizer but it's completely redrawn with different sizes…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
Toothpaste squeezer for your almost empty toothpaste tubes. Slide your tube in the slot and turn the knob. Print as is without supports.
This is an insert for the Cricut Maker tray that helps you organize your tools.
Most minimized and functional USB Cable Organizer ever Printing parameters: 0.2 mm resolution, 3 perimeters, no supports. Common cable diameter is 3.50 mm. Gcode contains one piece of each size.
Tweezer Holder for the HSW Tweezer container, easy to print with 2 models to choose. Can be printed without support. Easy to Snap to your Honeycomb Storage Wall. Tweezer Dimension This holder is designed based on the regular tweezer with…
Holder for six tweezers like this: https://www.aliexpress.com/item/1005002899777953.html?spm=a2g0o.productlist.0.0.e8d24
The Infinity Pen Holder is more than a simple desk organizer. With its clean, minimalist design inspired by the infinity symbol, this unique piece is the perfect blend of form and function. This model helps keep pencils, pens, and other…
Ultra minimalist toothpaste squeezer design that's plenty strong! Works great for other things like facewash, lotion, etc. Measure the width of your tube at the end to make sure you choose the right size (there are 4 to choose from…
An elegant stand to help organize and hold jewelry of different shapes and sizes. Includes a recessed tray on the bottom for smaller items such as earrings, and the three arms can then easily accommodate bracelets, necklaces, anklets,…
Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
This project is inspired by “Honeycomb storage wall” project by RostaP, but NOT COMPATIBLE with it. My honeycomb plate has different dimensions and its walls are thicker and more solid. This project is not finished. New components can…
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Do you hate wasting toothpaste? I wanted something to help extract all the toothpaste from the tube and still look nice
larger compartments 80x35mm new design
this is a remix: https://www.thingiverse.com/thing:2384216 The great design of pzonyga didn't really grab the tip for me because the thin arms deformed a little when they went together. So I made the tweezers a little more massive and…
Hello, this is an early version of a compliant gripper which allows you to hold small objects that you can't reach using only your hands. So far I made four versions: Small rings (Ø20 & Ø14 mm): Short version - its dimensions are approx.…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
A small remixed version of @SaschaUncia 's Parts and Crafts Organizer Box that fits on smaller print beds like the Prusa Mini+. My son needed a box to keep his components for Arduino tinkering separated/organized and it seemed like an…
Info: I liked the original a lot (thanks @M4NU !) added grip lines at both ends of the tweezers, so it can hold things safely i have found it useful for my usage Asembly: just fold it, no glue needed (just like original) Print settings:…
Info: for simple keys with round base for keys with dimensions of the round part: diameter: 23 mm (or less) thickness: 2,3 mm (or less) designed to be tight, so it does not slip away in Blender you can easily use different text (if you…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Holds your PTFE tubes from the MMU2/MMU3 nicely parallel - which helps to reduce friction. The part does not actually clamp the hose, but the friction should be enough to hold it in place. The model allows you to choose either an M3…
A robust holder of HDMI size cables & a smaller version for USB size cables.
Original model was designed by chendragon2099. Body is prepared for MMU2S. Filament 1: Body; Prusament PLA Galaxy Black Filament 2: Face + Tail + Belly; Prusament PLA Vanilla White Filament 3: Beak ; Prusament PLA Lipstick Red The drawer…
For the organization of the small components that I have around, I designed this modular box. It is easy to print, does not require support or other components. The 1x1 box has an external dimension of 25x25mm, the wall is 1mm wide (it…
Desk organizer for storing pens, scissors, sticky notes and other stuff. (W)150mm x (L) 120mm x (H) 100mm.
Stores individually wrapped tea bags vertically with display bag visible. Easy to pull from bottom with generous fingerhole cutout at front and bottom. Holds approximately 1.5 boxes of tea. When stocking tea bags, reverse half of them 180…
I hate seeing USB and Charger cables laid bare on the table. Thus, I made this cable organizer to help in protecting the cables in the right place. 2 models are created and both bundled in the gcode (3 cables option and 5 cables option).…
📦 Description This storage box is designed as a universal, lightweight, and durable container, available as a small family of height variants. All versions share the same footprint and design language, differing only in height to better…
This fits gridfinfity systems and is 4x4 in size. There are 27 pockets, 3 different widths, and each has a 10mm radius at the bottom. I always prefer using Polymaker filaments. They print very well even when not perfectly dry. Very…
📝 Description Keep your cables organized and always within reach with this minimalist 5-slot cable holder. Designed for desks, workspaces, gaming setups, home offices, and bedside tables, this cable holder provides five dedicated slots…
I created the Hexagon Pattern Version of my Stackable Baskets Organizer System with Lids (Circle Edition) at the request of a user. Model Stackable Baskets with lids. Length [mm] Width [mm] Height [mm] Model XL High 204.0 124.5 117.5…
It does not matter witch one have you printed, instalation of the RPI Pi Zero is same and very simple for all of them. If you want to use a camera with your RPI, first pass the camera cable thru the hole in bottom of case and plug it in…
V2 of this model is now up! Go check it out Overview: This system was designed for a college independent study and was inspired by the Tons Gear Organizer product . It is designed to work with a roughly 1" (specifically, 24.6 mm) wooden…
MK3S Raspberry Pi Zero W Cover based on Steve's Fans Covers Print instructions Directly use the 3mf or gcode if it fits your print. Otherwise you'll just need to configure: Zero top and bottom horizontal shells. Five perimeters. Honeycomb…
A slim case for the Raspberry Pi Zero (w) and the Pi Zero 2 with mounting tabs and a friction fit lid. There are a few alternate lid designs if you want room for a header and/or heatsink. The regular case and lid work fine on the Zero 2,…
This is a mashup of two very cool systems. Additional Materials: 6 pcs - M3 x 6 mm bolts (or M3 x 4mm) 6 pcs - M3 x 8 mm bolts 14 pcs - 3 mm x 35 mm rod 2 pcs - 3 mm x 32 mm rod (for the bottom of the front latches 2 pcs - 3 mm x 25 mm rod
Use to fixe 5mm wood sheet (balsa) in you drawers (I haven't prit it yet)
Notice If you don't need a magnetic holder check out my latest design HERE ! This is my design of the idea seen in some of the latest LinusTechTips videos. I am sure they will eventually come out with a great product so do check out their…
My daughter wanted some hand sanitizer for her 1:12 dolls, so I made her it. Printed in white PLA at 0.12mm layer height. For me, it was hard to get off of the “BuildTak” sheet that came with my Creality Ender 3, so I printed with a raft.…
tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2
Another simple but elegant toothpaste squeezer ;-) Print Instructions Parts are oriented in the correct position Filament PETG (PLA maybe not) Nozzle diameter : 0.40 mm Default 0.20mm QUALITY PrusaSlicer Print Settings Perimeters : 3 No…
My son wanted a better way to organize his money and gift cards, so he and I designed this ultimate bank! At the front, is a slot for the common US coins (quarter, nickel, penny, dime) with handy “pullers” that allow you get access them.…
A remix of IOI671701's Hornady Comparator Set Organizer Box . This box will hold: 5 headspace comparator inserts (A, B, C, D, E) 8 bullet comparator inserts 1 anvil 1 spare grub screw (under the anvil) 1 comparator body 1 1/16" hex key…
I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…
Advised to print the small one first :)
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
BIG RED BUZZER / EMERGENCY BUTTON (Grobhandtaster / Not-Aus) I always wanted to have one of these "big red buttons". Print instructions Material: For the bottom half of the base, I used black PETG from "Das Filament", for the upper half I…
New "boxes" inside the Altoids like boxes :-) Print Settings Printer Brand: RepRap Printer: 3dRag Rafts: No Supports: No Resolution: 0.2 or 0.3 Infill: 20% How I Designed This Imported the STL from the original work, designed e new one…
Tired of digging through endless bags of screws, nuts, and tiny parts? Meet the Modular Organizer , a customizable storage solution for every maker! Perfect for organizing 3D printer parts, electronics components, or robotics bits, this…
The three interlocking gear shaped holders are held in place by a frame at the bottom. The whole office organizer is print-in-place and no assembly is required. Beside its functionality this design also shows the possibilities of 3D…
The ultimate organizer for Anycubic Kobra Go. Fully uses the profile length on both sides of the printer. Left side is a tool holder with a scrap tray. Right side is a generic deep tray. Print vertically without supports.
This is a remix of a brace I printed a while ago. I cant find the original model any more, but these are much longer. The ender 5 needs brace supports for the Y axis, but the belt tracks in the bottom groove on the Y axis where the tee…
A funny toothpaste squeezer in mouth form that makes sure you get all the toothpaste out of the tube without wasting any. Print instructions Easy to print. I decided to print it in PLA with infill 50%.
Similar to my TweakTown 24x Thumb Drive Organizer found here, this Flash Drive Organizer Holds 24 Standard USB Flash Drives but does not feature a logo. I have tested this model with the following thumb drives, but it will work with any…
I designed this powerful tweezer for laboratory equipment whose purpose is to directly facilitate laboratory activities related to clinical, biological or chemical laboratories. Since I could not get functional efficiency from the designs…
You want to get the last bit out of your toothpaste tube without any effort. With this model, that's no problem anymore. Happy printing! Recommended print settings: Nozzle: 0.4 Layers: 0.2 No support Adjust the size of the model to fit…
This s a toothpaste squeezer remake from https://www.printables.com/model/26897-toothpaste-squeezer. A pair of strips was added to the original design to increase the squeezing ability of the model. A sample GOCDE file is attached for…
It stores all contents of the Journeys in Middle-Earth game in the core box and its two expansion boxes. The core box holds all the minatures, the battle field maps and the rules. One expansion box contains all the cards and tokens and…
print took around 13 hours. You'll need good cooling it has 22 degree overhangs. I even had a little drooping with a 5015 fan.
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…
An enlargement of the stl model by 10% was used for the small packs and 65% for the large packs
This is a snap in place label for the Milwaukee Packout Organizer; model 48-22-8430
Organizer Trays for game "Quacks of Quedlinburg" Printed with "Prusament Premium PLA Mystic Brown" at temperature of 230°C Needs supports because of overhang!
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
