Counting matching models…
Simple stand for ZimaBlade which allows the board to be placed on the flat surface with storage hanging above the computer. I've designed it this way because I suck at cable management and I've mounted power/Ethernet/miniDP cables too…
That is my case for the Zimablade. You need: 4x M3x10mm to hold the SSD's 4x M2.5x12mm hold the top part 4 M2.5 brass inserts at the bottom part 1x 60x60mm fan (with mount screws - 4x M3x20mm in my case). The top part is common for both…
This is my customized 10-inch rack mount for the ZimaBlade. I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card. Because I also added a 2.5” hard drive mount,…
An SSD holder for the Zimablade: https://shop.zimaboard.com/products/zimablade-single-board-server-for-cyber-native Clip design allows SSDs or HDDs to stay in place without screws. That being said, screw holes are provided, but you will…
I designed a case to install an 80mm fan and an SSD. With active cooling, the temperature can be reduced significantly. The air flows out from under the entire underside to the rear through the cooling fins. The Cable you need to connect…
This has been designed as part of IceWhale's 3D design challenge . Please consider liking the submission here . Each voter receives a $5 coupon. Enhance the functionality and capacity of your 2 bay HDD stand with these add-ons designed to…
zimablade case that fits one or two 3.5" drives. hoping to eventually had a expansion card enclosure as well. requires 4 3x6mm or 3x8mm hex screws, think its 3x6. also requires 4 2mmx10-12mm hex screws. the 2mm can be hard to install, may…
Custom slot loaded (top down friction fit) for the Zimablade SBC module for use in the microRACK homelab setup. This has an additional slot for mounting a SSD or 2.5" hard drive. REQUIRED: You will need to print the microRACK track to…
ZimaBlade Powerful Single‑Board Server for DIY Labs & NAS Flexible PCIe Expansion Silent & Rugged Design Modular NAS & Storage Capability Supports Your OS of Choice Highly Rated by the Community If you'd like to learn more about…
NASTIER (Network-Attached Storage; Tiny; Inexpensive; Easy; Redundant) A ZimaBlade-based micro NAS with redundant Raid 1 storage and full server capabilities. Full instructions on my website here:…
remix from 6.5 inch rack ZimaBlade by request, more info read in remix source i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
1 Bay HDD Stand that fits the ZimaBlade and one 3.5" drives or two 2.5" with adapter. I used this adapter for 2.5" SSD's: https://www.thingiverse.com/thing:5423854 The model needs supports for printing.
A space-saving option to have your ZimaBlade on its side rather than flat against your worktop. Allows space for heatsinks or a fan to be attached to the blade and orientation for the heat to escape. Includes space/a cradle for a single…
Custom slot loaded (top down friction fit) for the Zimablade SBC module for use in the microRACK homelab setup. The module has 2 VERSIONS depending on which ports you want accessible on the front. REQUIRED: You will need to print the…
Project: This is my remix of the 10 inch Rack 1 U HDD cages from https://makerworld.com/en/@OloDeepdelver. I added a mounting option for a ZimaBlade to act as my NAS as my entire Homelab is based on a 19 inch rack. This was printed in…
Really love this model. Printed mine in PETG on a core one “vertically” with the face down for a nice textured finish from the build plate at the front of the rack. Added a couple of 12mm holes to the front for power buttons (see pics) I…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection rack mount design by use 3D Model Resources for IceWhale Products as reference and i dont have device to test this print, use at your own risk Rack mount use M3…
Notes on printing: Orientation so that the flat side (inside) lies on the print bed. Optional possibility to glue in TPU feet. Minimal support required. Assembly: Screw the printed parts to the two hard disks using 8x M3x8 screws. Then…
This is a relatively simple mount for a ZimaBlade, its designed for the blade to be slid on the holder and be bolted to the back of a monitor, this may be used where the ZimaBlade is used as a media player, or digital signage. The PCIe…
Requirements: 80mm fan (designed for Noctua NF-A8 PWM ) JST GH 1.25mm 4pin male -> fan adapter (you will probably have to improve and create your own) 2x5.7mm M3 heat inserts (designed for CNC kitchen M3 x 5.7 , but deeper or shallower…
Slight modification of DesignBot's Zimablade 10in rack mount Check out his original design here
A modified version of the original model with a holding bracket for a small single fan GPU. Repurposed for Zimablade.
A 3D model designed to build a home NAS based on Zimablade , with support for two 2.5" drives (HDD or SSD), featuring a design identical to the Iliadbox by Iliad , allowing it to be stacked seamlessly while maintaining style consistency…
(Fast) Schraubenloses NAS-Gehäuse für das ZimaBlade. Steckbares Gehäuse für das ZimaBlade und zwei 2,5“ SSDs/HDDs. Gedruckt in PETG. 8 Schrauben M3 x 5mm für die SSD/HDD-Trays werden benötig.
ZimaBlade Powerful Single‑Board Server for DIY Labs & NAS Flexible PCIe Expansion Silent & Rugged Design Modular NAS & Storage Capability Supports Your OS of Choice Highly Rated by the Community If you'd like to learn more about…
This is a relatively simple mount for a ZimaBlade, its designed for the blade to be slid on the holder and be bolted to the back of a monitor, this may be used where the ZimaBlade is used as a media player, or digital signage. The PCIe…
