685 models
Aztec Death Whistle Updated (fixed bottom 12/7/2024) Small sound demonstration here.
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Simple but modern two-part pot or planter for your house or garden plants. Design inspired by Aztec design and buildings. A new design series called Ancient design is here! - there will be more such pots in the future - let us know what…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
Simple but modern two-part V shaped pot or planter for your house or garden plants. Design inspired by Aztec design and buildings. A new design series called Ancient design is here! - there will be more such pots in the future - let us…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Table stand for ZTE MC7010 5G antenna. Parts will fit tightly together. No glue required. I recommend to print with PLA as the tolerance of the parts may not be enough for other filaments. Use supports just in case to get a good fit for…
Print approx. €2.48–€3.03 excl. taxPreliminary estimate for one variant
Bluetti Halter für das 500W Netzteil T500 oder den Ladeverstärker Charge Enhancer D050s zum Solargenerator AC200(P/MAX), B230, B300, AC300, EP500 Das Netzteil kann ohne Schrauben zu lösen, entnommen bzw. eingeschoben werden. Am hinteren…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET
Das Teil passt in die Gravitrax pro Erweiterung. Kompatibel mit Gravitrax. Kann man festkleben damit es stabiler ist.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Mit dem Netzteilhalter können Netzteile von einer Höhe von 32mm und einer Breite von 38mm durch 3mm Schrauben befestigt werden.
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
##German Version / Deutsche Version:# Nachdem ich meine Satellitenschüssel vom Dach des Wohnmobils entfernt hatte, hatte ich eine offene Kabeldurchführung. Der provisorische Verschluss war keine Augenweide, also: kurz vermessen: 80mm…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Schanier für eine Duschkabine. Das alte Teil ist zerbrochen, also habe ich es nachgebaut. Leider weiß ich nicht, von welchem Hersteller die Kabine ist. Möglichst in PETG oä. drucken, PLA geht zu schnell kaputt. 100% Infill
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Drehknauf ist passend für die ARENDO Eierkochermodelle. Es scheint ein Problem bei den original Knöpfen zu geben. Sie brechen nach einiger Zeit ab.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
EN: After the good old Arflex desinger side table could no longer be saved even with epoxy and no spare parts could be found with the best will in the world, I decided to print them myself. I constructed the entire table including the…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
Ein Ersatzteil für die Abdeckung einer New Shades Jalousie.
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Es handelt sich um einen Halter der in die Aluschiene eines Wagens für Flächenvorhages
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Es handelt sich um ein Ersatzteil für die Armlehnenverstellung eines Bürostuhls. Leider ist der Hersteller oder Typ des Stuhls nicht mehr bekannt. Wer das Teil sucht, wird es aber sicher sofort erkennen. Die Platte ist 129,7 mm lang und…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
Modifications to the body to allow for a more ergonomic blasting of the death whistle, and some nice pointy horns for a -5 penalty to enemy morale checks.
A working replica of the Aztec Death Whistle from Ghostbusters: Afterlife Fixed errors from the original design . Printing Print with the eyes facing up, default orientation. Use support on the build plate only to avoid supports inside…
Replica of the Pirates Of The Caribbean Gold Coin This model imported from Thingiverse. The model is based on javialam and remixed by cyclone . The remix includes two sided versions and a necklace holder. Other models which are very…
Took about 2 1/2 hrs to print on my ender 3 V3 SE.
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
***IMPORTAED FROM THINGVERSE*** Just stick together using a glue and make use as you want... Enjoy.... Print Settings Printer brand: Creality Printer: CR-10 MAX Rafts: No Supports: No Resolution: 200 Infill: 20 Filament brand: FlashForge…
made the mouthpiece so it was easier to blow into it (tip: put two fingers in the hole as deep as you can in the bottom of the whistle, it will sound better.)
a very LOUD whistle used in the aztec times
This is my personal challenge to earn Prusa in Earn Prusameters! The goal is 25000 Points, which is 70 models downloaded 400 times and liked 20 times. I wonder if it is possible to achieve this. I also printed every model that I add.…
UPD 01.02.2025 Aztec calendar (Aztec sun stone) Spanish-Piedra del Sol . DIORAMA WITH A SET OF FIGURES I've uploaded a much better model of the calendar, as well as a set of figures to create a diorama. See here:…
Elegant 3D printable Clay Wheels ✨They're perfect for adding beautiful Aztec-inspired textures to all kinds of materials like clay, polymer clay, pottery, cake dough, fondant, fabric, and more! 3 patterns in STL print-in-place handle Size…
Easy to print Material: PLA Supports: Tree Temp: 200 Aztec Death Whistle (Wikipedia) The Aztec death whistle was a whistle exclusively used in several zones of the ancient Mexica, which mimics the sound of a horrifying animal-like…
Ich habe diese Teile irgendwo im Netz gefunden und wollte sie hier auch teilen.
Optimised for exceptional quality with PLA or PETG using a 0.8mm nozzle (also works with 0.4mm nozzle from 0.20mm to 0.28mm layer height) Model scaled to 75% size for a higher pitch (scarier) Great adhesion when printing a full bed of…
This is the remixed popular Mayan death whistle. It is much smaller and has an added loop so it can be carried as a keychain. Let me know how the print goes. No post-processing is required. If you notice any stringing, you can clear the…
6 Color HueForge model. Aztec carving filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6 Sunlu…
Aztec Temple for your succulent? Yes, another succulent planter for your desk or home. This one has the over water drain in the basement that goes under the stairs. If you see water there, you have watered too much. The bottom vents allow…
IMPORTANT: After printing and cleaning off the supports, it’s worth checking the mouthpiece. There might be leftover elements/threads that need to be removed. If you don’t do this, the whistle won’t work. So far, I haven’t been able to…
The rock as a whistle. Now with mouthpiece and keychain holder
Made the rocks head a death whistle
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
These instruments were used in ancient Mexico and they require a lot of pressure to produce their screaming sounds. You really have to blow as hard as you can. So, designing my own and adapting it to work as a projectile took a ton of…
AZTEC PENDAL COIN STAND
Yarg, I took the original and made it double sided in Matter Control. It prints upright, I printed on a Kobra 3 combo with a brim. Cryoplate 50C bed temp with sport mode just fine matey. If one of ye land lubbers prints it without a brim…
shout out to @GhostPants_937036 for the jumping off point had some great success with this profile and did lots of tweaks to the original. on other section in post-processing scripts be sure to update to your archwelder install path
This is a beautiful figurine depicting the Aztec deity Quetzalcoatl, originally posted by Världskulturmuseerna on Sketchfab. I have cleaned it up slightly for 3D printing. Prints great with organic support! Info from Wikipedia:…
Ersatz-Zinke für den Bruder Linde Gabelstapler 1:16. Nachgezeichnet nach 2D Scan. An der Spitze der Zinke einseitig verjüngt. Für die andere Seite bitte gespiegelt ausdrucken. Verstärkt. Passt besser als das Original. Auf den Fotos sieht…
Modeled after an Aztec Death Whistle, this model is similar but doesn't have the exact same screaming whistle sound, but still makes a fun whistle sound nonetheless. This model is in progress and I will continue to tune until I have a…
I wanted to make a more screen-accurate version of the "Aztec gold" coins from the 2003 film “The Pirates of the Caribbean: Curse of the Black Pearl”. Inspired by the other model here…
This 3D model is based on the Sun Stone, a monolith/sculpture that was uncovered in Mexico City (The Aztec Capital) in the late 1700s. Currently housed in Mexico City, it’s exact meaning is debated - it could be religious, cosmology…
A perfect Valentine's Day gift for any couple. If you quarrel with your partner, there is no other solution than to a Sacrifice to the Old Gods. Material: Prusament - Pearl Mouse PLA / Mystic Brown PLA / Spectrum - Copper Pla Nozzle:…
Three ZTE 5G Model MC7010 wall mount and Base Plate This is classed as an outdoor router. It uses a SIM card It needs to be mounted vertically outside the Sun.
(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…
🖤 Modernes Wandregal – Versetzte Ablageflächen
one of the mountings for our old roller blinds was broken, the roller blind itself is still in perfect condition - so I decided to reproduce the part included step files to easy modify have fun! IF SOMETHING IS NOT OK PLEASE LEAVE A…
This is a planter with the famous double headed aztec serpent. Thats it really, its a planter , you put plants in it, we are not doing rocket science here ;-) printed in pla or petg , best in petg if placed outside or somewhere hot. Print…
First layer depth 0.16mm then 0.08mm for all other layers. Filament: SUNLU PETG BLACK - 1st layer up to and including layer 8. SUNLU PETG SUNNY ORANGE - 9th layer up to and including layer 14. SUNLU PETG YELLOW - 15th layer up to and…
A planter with aztec design, the current photo is of version 1 , this is version2 . Best printed about 20cm high or bigger. Print with planter base down and the rim with top down. If this is going in a green house or somewhere hot best…
Aztec Jaguar Warrior Mask - High Detail Boosty is a secure platform for creators (Patreon alternative). It accepts PayPal and all major Credit Cards! This is a highly detailed, stylized mask inspired by Aztec and Mayan jaguar warriors.…
A stamp wheel from the Aztec Collection #15 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
This took me super long to 3d model. Modeled in fusion 360. This stl will also work for cnc machines. This file is also very large because there are a lot of complex geometries so it will take some time to slice in your slicer. It is…
A stamp wheel from the Aztec Collection #14 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
Ersatzteil für Inca Kirschenentkerner. Das Originalteil ist altersbedingt zerbröselt … Gedruckt mit flexiblem Filament. -- Replacement part for an Inca cherry stone remover. The original part got brittle … Printed with flexible filament.
Support Me On Patreon and Get Commercial License access https://www.patreon.com/c/naqashafzal/membership 🔥 TESTED & WORKING – EXPERIENCE THE SCREAM OF TERROR! Meet the Aztec Death Whistle , inspired by one of the world's scariest ancient…
Aztec sun stone (Spanish Piedra del Sol ) is a late post-classic Mexica sculpture housed in the National Anthropology Museum in Mexico City, and is perhaps the most famous work of Mexica sculpture. It measures 3.6 metres (12 ft) in…
Support wie im Bild. 3x 2mm Schrauben zur Befestigung notwendig. Gedruckt in ABS. Grobe Anleitung: Ausgangszustand Motoreinheit ausbauen (4x T6 unter dem Batteriedeckel, Verstellrad einfach abziehen) Flansch entnehmen (2x T9 seitlich)…
I saw an amazing image of a skull and was instantly inspired to turn it into a fully functional death whistle. I'm really happy with how the modeling turned out, so I'm sharing it here for anyone who wants to print their own! As you can…
A stamp wheel from the Aztec Collection #13 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
I found what I thought was a really good design and remixed it so I can I can use it as a little cave in my aquarium, but I'm pretty sure it’ll work for terrariums as well. I only used supports for the exterior ceiling and it turned out…
I made solid version of this feeder without any holes for easy FDM printing. Original file is remix of flowerpot version that is hollow with holes in the bottom. I used adaptive layer height and ironing for the bowl part. Everything else…
Wandhalterung für ein ZTE MU5001 Mobile Router
A sculpture based on an Aztec design. It is designed to print without supports. If you collect or download, please "Like". Print at the highest resolution settings on your printer for the best results.…
Untersetzer 105mm - 4mm hoch
Made in Tinkercad, I was like 13 and I wanted to print one of these but I could not find a good model for free so I spent about an hour in Tinkercad making this. I might redo this in a few months when I have time. Settings: Layer height…
Aztec Double Headed snake. + Double Headed Rancor as displayed in Luthen Rael antiquities shop in Andor series. + an Double Headed Rancor with a texturized head (was trying to get it to fit with the snake skin motif) MEH.
6 Color HueForge model. Aztec Skull filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: PLA Sunlu PLA+ Black Transmission Distance: 0.6 PLA…
This is a 3D scan of an Aztec sculpture, it's a demo model from Go!SCAN 3D. There is a color model and 2 STL models that I have edited a bit (fixed holes, smoothed some areas) and gave a flat base. One file is a big original scan, the…
Deckel für Netzteil mit leisen Lüftern Der Unterschied ist enorm, die Lüfter kaum noch hörbar. Umrüstung auf 12V Lüfter 1x Original Anycubic Netzteil Lüfter 1x AAbCooling Slim Silent Lüfter 80mm x 10mm (…
Göztepe logosu kullanılarak çeşitli programlarla 3b hale getirilmiş ve direkt baskı alınabilir .stl dosyası oluşturulmuştur. Pla 0,2 nozzle kalınlığı ve %10 dolgu ile çok iyi sonuç alınabilmektedir.
For Surface Pro Power Supplies (e.g. Pro 5. Not suitable for Pro 8 without modifications) Check if your power supply fits because the newer ones are bigger. If you have the bigger power supply (e.g. Pro 8): Measure the outer dimensions of…
This model is compatible with the lego system.
This is an artistic cube with a design derived from Aztec architectural structures. Designed to print without supports Please "like" this file if you collect or download it. Instructions Created in Modo. No special instructions. If the…
Ersatzteil für einen alten Playmobil Gabelstapler.
I tried the other Jack Skellington Aztec Death Whistle on here and the sound was a bit too high pitched for what I wanted. I have a feeling that file is smaller than it needs to be, but I decided to try my hand at making it with a…
Aztec Earring, Pendant, Christmas Ornament
Spare part for the Playtive Station. Category: Construction Toys
Ersatzteil-Schieber mit den gängisten Einstellungen A4 und A5
Since I got new monitors, I had the problem that they are using powersupplys instead of power cabels. So tho solve this and dont have any powersupply hanging anymore, I constructed a small bracket to hold the and screwed it unter the…
Ersatzteil-Visitenkarte Diese Teile sind natürlich nur für “ leichte Aufgaben ” jedoch in so manchem Hobby-Bereich wird sich eine Verwendung finden. Beim Druck sollte eine Schicht-Höhe von 0,15 mm nicht übersch r itten werden. Ich…
Hi all, having the problem, that the 10m cable coming with the ZTE889 is not long enough and cannot be replaced, I created my own cover to add a my own cable. This needs to be used together with a cable gland, so you can seal any round…
Have fun printing it! On my panelslide it works fantastic. I reccomend printing it with 100% Infill standing on one of the short edges Category: Replacement Parts
Teopankatl - The Forgotten Aztec God
Baseus USB C Ladegerät, 65W USB C Netzteil 4 Ports GaN Charger
Einfacher Halter für das Netzteil des Prusa i3 Mk3/S/+ um das Netzteil beispielsweise außerhalb einer einhausen zu montieren. Simple holder for the power supply of the Prusa i3 Mk3/S/+ to mount the power supply outside a housing, for…
