Counting matching models…
Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…
EN: This is my seamless Peg Board V3 (#0111). The mounting screws are countersunk. All holes are useable. Minimal support is required (Tree Support). I have added a single pin so that you can quickly design your own holder. Just add them…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** First I took on the challenge of creating a STRONG split key ring for everyday…
I wanted a way to store and ship my cpus i have. The design is inspired by another one from here, but it is 100% my own. There are 5 cpu platforms currently supported. If I will get my hands on others I will upload the designs also. The…
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
🧱Lego Duplo Brick 2x4 #3011🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
A sample of some of the parts available in the full kit. Pre-supported and test printed, Micro Gundam Model kit. More info here : https://cults3d.com/en/3d-model/game/msa-0011-ext-ex-s-gundam-artifact-scale Or…
🟦 Zetor Crystal 8011 🟦 UPDATE https://www.printables.com/cs/model/446803-zetor-crystals-update-for-attaching-a-trailer-no-s From this day on, all my models will be in the better 3MF format Look forward to other similar models, I will be…
This model is compatible with the lego system.
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
I printed it with 0.6mm nozzle and 0.3mm layer heights in PLA and it worked fine, it doesn't damage any of the pins and keeps them covered. I made this quickly so it's not perfect, but it does the job
Remixed an older design from Discobanan since the original had a lot of friction for me. Safely store your precious Xeons (and Desktop CPUs)! Best printed as the STLs are already orientated.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Objective: I wanted to add switches to the Voron 2.4 skirt for accessories…
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
This model is compatible with the lego system.
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
I wasn't about to pay springfield or another company $50+ for a +3 magazine base pad extension for my Prodigy DS 17-round mag, so I designed my own in fusion from scratch. Currently uses M3x4 heat set inserts I grabbed from microcenter…
My center console (underneath the shifter) was a mess and needed something to organize it all. Specifically, I wanted something for coins as they would always get shoved into a cup holder and rattle around. I found some great examples…
EN: My wife asked me to design a dosing spoon for detergent. This should have exactly 54ml. (1.5 times the old one) DE: Meine Frau bat mich einen Dosierlöffel für Waschmittel zu entwerfen. Dieser sollte exakt 54ml haben. (1,5 mal der Alte)
Replacement Toyota emblem for a 2nd generation (2005-2011) Tacoma. The back "fill" piece has two slots built in for cable ties to pass through to secure to the grille. I have included a 1 piece file which you can do a layer change on for…
Need more airflow without modifying your case? No problem!! Print 2 of each O11 Dynamic evo feet Alt.stl X2 O11 Dynamic evo feet.stl X2 i Printed on Anycubic Vyper 3 walls gyroid infill 20% infill
This is a 2011 Dacia Duster, it has been custom modified for 3d printing and prints pretty nicely Happy printing! link to original: 2011 Dacia (Renault) Duster - Download Free 3D model by razor24 (@razor24) [30bc2e0] (sketchfab.com)
uses standard mounting holes for most frame mount sights, has “love & peace” inscribed from the show Tri-gun.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models ! ********** I always enjoy a simple modern way to store things like this toothpick dispenser in a…
This is a 65% mechanical keyboard design inspired by the Apple M0110 keyboard and the Apple II computer using the KBDfans Tofu65 2.0 PCB. It's originally designed to be printed on a Voron 2.4r2 300 but any printer with enough space should…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
There are two options, the first is a copy that can be bought for example on Aliexpress, but for my top flow cooler it did not fit, one wall interfered, so in the second version it was removed, but the rigidity of the structure was not…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Motivated by the business card case design by @LoboCNC , and thanks to LoboCNC's…
Made a few modifications to the original design. Prints well with supports for the depressing tab and the finger loop
Custom STI 2011 9 x 19 Base Plate If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
Never be caught short again with my versatile coin and contactless payment holder. Designed specifically for Ford Fiesta 2011 owners, this compact accessory features a secure coin compartment to keep your parking fees organized. The…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Update 1 : Slide lock likely fly away so we find the way to fix ts(this) Added SlideLock Added anti-walk for fcg likely come out too Note: Grip are not include infill 99% weight around 280g (only model) no full auto too lazy to make it…
Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…
You will need to print two of these to mount the cooler. This uses the hardware that is included with the kit. All you will need to do is secure the clips to the print. The cooler used can be found on amazon here Pick the cooler that…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Jan 11, 2024:] added a case that fits long…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Yes, lots of bit holders are available to download,…
Simple angled laptop stand for my Macbook Pro. Wanted a sharper angle to take up less deskroom. Will likely support other laptops -- the gap between vertical supports is 17mm. Inspired by this design but rebuilt in Tinkercad. I wanted to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
MIKROTIK 2011 / 4011 - series - holder RACK 19''
I bought a chonky noctua CPU cooler for my 011D only to realize my smooth brain never checked the dimensions of the cooler against those of the case… so here I am making an adapter that moves the side panel out roughly 17mm. ENJOY :)…
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
This model is a simple but very useful magazine holder for all double stack 9mm and 10mm i could test it with. This includes 2011 magazines.
Warning Only the right side has been printed (the left is a mirror operation). Definition C1 is the bottom color, C2 the middle one and C3 the top one. Printing Is required the same printer size than 3D SETS has defined. Use the same…
UPDATE: I cut the model so that that it is out of the way key to ensure that the original key is making OEM contact with the car. This is to fix where the plastic breaks off where it connects to a key ring. First, file or sand the top of…
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
ssogaard 's Oil funnel remixed for 2011-2014 F150 5.0. Funnel is keyed to match oil cap.
— — — Edit 11.06.25 Added CAD files — — — I couldn’t find a 10-inch rackmount that fit my MokerLink 2G080110GSM switch—so I designed one myself! The switch slides in from the back and is held securely in place by built-in hooks,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A simple adapter to mount an SSD hard drive in Apple iMac 2009-2011. Printing time approx. 31 minutes 8 grams of filament Category: Computer
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a tray for Intel Xeon CPUs of Ivy Bridge & Sandy Bridge (Xeon E5-26xx and their v2/v3/v4 variants), and some Haswell & Broadwell. It may fit other CPU models too! Check your CPU dimensions: if it's 45x53 - it will fit! UPDATE:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Honda Push Rivet 6MM these are push-to-release rivets with captured pin Modeled for Honda Dax Battery shroud Honda Part number 90116-K0A-E11 Suggest printing the rivet outer part in 90° orientation for best strength as shown in…
Modeled to replace the standard fans FAN-0118L4 with Noctua NF-A8 PWM fans in a 2U Supermicro Server SCE829. As stated by Supermicro the FAN-0118L4 is a standard fan for CSE-218UTS, CSE-219UTS, CSE-828TS, CSE-829, CSE-835XTS, and…
Needed a replacement grommet for my 2005 Ford Focus. This one was almost exact, so with some minor changes this fit perfectly. You may need to file the nodule off the prop rod to make it fit, or file the grommet slightly so it can slide…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Additional Signs from DIN 4844-2, NEN 3011 & NF ISO 7010 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were…
This is a sabot that is used for traditional hunting with black powder rifles. It creates a gas seal between the barrel of a muzzle loader and the bullet/Ball. Instructions Print it. Use it, or just show it off. Category: Other
A cover box to store Intel CPUs with the LGA 2011-3 socket.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I really like my Dyson V10 cordless vacuum. It's light weight and powerful!…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Windshield washer fluid reservoir cap for a 2011 Volvo S40. Includes a very small vent hole in one of the portions of the icon. It fits very well on my S40. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
No support required, ideally should be printed with ABS. Was using 6 pc. M4x15 bolts, 4 pc. M4x18 bolts, 6 washers and two M4 nuts to attacht this to dual cpu motherboard.
Festool is very innovative in the further development of its tools and their details. Therefore, here is another anti-tilt for mitre cuts with the FS 55 EBQ and the FS/2 rail. Suitable for the 2011 model of the TS 55, which was the last…
I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** We have an 8-foot wide closet that we wanted to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
EN: This is my Universal 4x3 Holder for seamless Peg Board V3 (#0111). Support is required (Tree Support). DE: Dies ist mein Universeller 4x3 Halter für mein nahtloses Peg Board V3 (#0111). Es wird Support benötigt (Tree Support). Links:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
GENERAL This Zetor is a unique model for passionate Zetor fans, not only because it has many features such as movable arms, rotating wheels with a steering axle, and more. The Zetor also has an opening hood under which hides a beautiful…
Drop in grip safety block for 2011s, No permanent modifications required just drop in on top of your mainspring housing behind the grip safety tails over top of the hammer strut and reassemble. no need to pin your safety using this PETG…
Unášeč - Spojka pre kuchynský robot ETA 0010. ETA blender carrier
2011 competition style follower to add plus one. Does NOT lock back.
This model is compatible with the lego system.
Want a manual style shift knob in your automatic mk6 or mk6.5 VW? Look no further! Shift knob adapter for automatic style transmissions to adapt a different, or in my case, more comfortable shift knob. Simply pull the shift knob…
Gridfinity Inserts for Intel Xeon (Scalable) CPUs with Sockets 2011, 2011-3 and 3647
Additional Signs from DIN 4844-2 & NEN 3011 that are not (yet?) in ISO 7010 I have only created new signs if they do not already exist in my ISO 7010 Sign collections or if they look significantly different. These Signs were all created…
This is for a third generation Toyota Sienna. 2011-2020. It will fit in the lower console to allow for phones, chapstick, dvd's, etc.. We had a Honda odyssey with so many more cubbies and this just helps us out with organization.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Used to avoid damage to socket pins when no CPU is in the socket (shipping, etc)
ENGLISH I lost the original control cavity cover on my 2011 Gibson Les Paul Studio. After realizing that replacement covers available online are either overpriced or don't fit the Studio model properly, I decided to make my own. The model…
Idk its feat perfectly now i will check this soon Scrues : m4x0,7
These should fit all the various mags made by Checkmate. I've tried it on Live Free Armory and MasterPiece Arms mags 126mm/17 round mags and it worked for both. If you try it on some other one let me know and I'll update this page with…
My little dogs push the buttons and upset my jeep. This cover stops that. It’s a tough print, and may need some tweaking because the “clips” need to be small enough to click in, but are also fragile. I would print vertically because it…
Realice este modelo para quienes necesitan imprimir números
An emblem replacement for 2011-2014 Chrysler cars
I made 2 changes after using Mathieu_Duamas's handle. I made the nut thicker and thus easier to operate and I made the bottom flat so i could set it down. Otherwise the original is very comfy and I like the screw design requires no rubber…
I made an adapter for my new chinese x79 motherbord and old AMD 754 cooler that I had. It will probably work for AM2/AM3/AM4, but I'm not sure. Category: Computer
Case criada para uso com a tela Nextion 4.3. This Case has build to use with Nextion 4.3 Display.
I lost the cap for the windscreen wiper fluid reservoir of my Ford Focus 2011 Stationwagon, so I whipped up a new one to replace it. Probably best to print in PETG which is more resistant than PLA. Could potentially fit other reservoirs…
When changing a CV axle in a 2010 ford focus I damaged my axle seal. I thought this would be an easy swap, but little did I know Ford used the worst seal design I've ever seen. After trying 2 times and ruining 2 seals, I looked online for…
I have a steady supply of empty unrefillable gas canisters (2.2 liters) and was looking for something to do with them other than just throwing them away (they can not be refilled). So I created a set of “Bird Bunkers” (because of the…
![#0110 STRONG Round Split Key Ring [3 sizes] - Meets the Demands of Everyday Use!](https://media.printables.com/media/prints/649764/images/5140960_15cdce87-8223-450e-aa50-46aad106d16f_e6506626-dde5-4a1d-90d2-5199e5125402/20231118_174057.jpg)
![MSA-0011 [Ext] Ex-S Gundam [Artifact Scale] [Free]](https://media.printables.com/media/prints/529483/images/4276285_70782fe4-78cf-4f7f-9adf-d5b4025016b8/01.jpg)
![#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>](https://media.printables.com/media/prints/684679/images/5379109_2c2c8704-f14a-47c0-a640-2faee9f8204a_5ae8e719-2a4b-4ff5-a084-a3e50fdbeffe/rl-20231217-006.jpg)
![#0114 [Remix] Business Card Holder <Spring Loaded Card Ejection>](https://media.printables.com/media/prints/665593/images/5286655_cb879090-431c-4fb4-b015-f0fdae30c873_ec75e7ce-cfda-4ebe-b19e-42802fe37971/20231206_224503.jpg)
![#0117 Pinecil V1/V2(BB2) Smart Mini Portable Soldering Iron Hard Case [2 Sizes]](https://media.printables.com/media/prints/670454/images/5353924_6e7c94e6-92a1-47bf-ab0b-a15ac30893b4_2d36bceb-8f66-4386-8114-1dac6445cf0a/20231212_163347.jpg)
