Counting matching models…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
11/22/22 update: If you are interested by RC boats check my other design at https://www.printables.com/model/322399-zryw-1-an-hydrofoil-rc-passenger-boat ------------------------------------------ This is a project I did in 2021. I'd been…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
Might need a bit of sanding. Infill: 100% Supports: Yes
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Wall mount for Lego Ferrari SF-24 F1 set 42207. Print settings: Infill: 30% 3D gyroid Perimeters: 3
Here is a bed model and textures for Orcaslicer and Prusaslicer for the SV07 Plus. Also included are json configs for slicer settings for Orcaslicer. “Klipper Detailed” orca profile I use everyday for a balance of speed and quality with…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
This model is a remix of Eplolako's model. I printed his and painted it (see photos) but it's printed horizontally on the bed from the middle up since he split the entire model down the middle. This causes a very noticeable loss of…
You can Import my SOVOL SV07 Profile to print fast and with the external fan. The only part I copied from Makersmuse was the start of the external fan. When you create a profile for PETG you should remove the external fan cooling and…
This is an enlarged base for the opoular Makita RT0700 Handheld Router. It makes it easier to guide the router on narrow pieces or at the edges. For a full description see my blog:…
Spoiler: I have not created 507 models; the name refers to the book “507 Mechanical Movements” by Henry T. Brown from 1868. The book is also available as an online version with animations. You should definitely take a look at it. Such…
A pencil vase for decorative purposes to hold pens and pencils, or anything else. It is 113mm tall and 100mm wide. Print time approximately 2 hours with a single wall at print speed of 50mm/s. The photo shows the vase printed in vase…
🚨 Latest version will always be found on the OSS Klipper Configuration repo. These config bundles can be imported into SS and PS. Printers SV06/Plus SV07/Plus Features Printer profiles. The best print settings in the universe (yes, even…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I was originally looking for a key ring that was 1) easy to use 2) easy to print…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Stuff you'll need: 1x Garmin insert (I took the one that came in the box, remove and keep the 2x M3 screws) 2x M4x8 SHCS such as these - https://boltdepot.com/Product-Details?product=6392 Start by screwing the printed model onto the…
A simple, easy to assemble model of the Thermal Katana from Cyberpunk 2077. The katana is 1.3m long. This version does not have room for electronics. Some filing/sanding may be necessary to fit parts together depending on your printer.…
Braindance Wreath from Cyberpunk 2077. Full sized and wearable, this is the perfect finishing touch for Judy Alvarez and other cyberpunk cosplays. The model and documentation were made with maximum effort and intended to be a product, but…
This is the Goblin, a single shot break open Silly Shell fed foam blaster. It can fire any ammunition type that can fit in a Silly Shell; you'll get solid performance from multi-dart shells, up to over 200 fps out of a sniper shell. You…
Cyberpunk 2077 logo. 150mm X 37mm X 10mm. You can change Z height if you want to make it thicker or thinner. Print instructions Rafts: Doesn't Matter Supports: No Resolution: 0.2
This RAK19007 WisBlock case is designed to be super rugged and printed in ABS to withstand higher temperatures. Recommendations: Use 4 walls and 15% infill for all Top and Bottom Plates - Use supports Insert - Use supports Shell - Use…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [UPDATE Sept 13, 2024] I just got some feedback that this model fits the…
This model is compatible with the lego system.
Hi! Due to the gift I received from Bambu in the form of "Remote Controlled 16-color RGBW Puck Lights", I decided to remix my previous "Minecraft Ore" model to attach these LEDs. The lamp has a size of 120 mm x 120 mm x 120 mm. Fits…
Recommended to print with PETG.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
A Zbrush sculpt of Roger Moore. Scale it to your needs and use the organic support option (Prusa Slicer)
10" Rack mount for optiplex micro mini PCs
This model is compatible with the lego system.
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 4-Way and 5-Way Tees…
This model is compatible with the lego system.
Fast Check if your Z axis is stil level with the bed on your Sovol SV06 Plus. I remixed these from the SV06 ones because after homing the SV06 Plus has a different gantry heigt. After homing the printer head and turning off the…
…Please be sure to hit like & post a make, I'd love to see your prints! Print on its flat EDGE as this will provide the strength you need in this orientation, that's important! Don't print too fast or you could pull it off the bed, use a…
This model is compatible with the lego system.
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary. Tags
It's a M-10AF Lexington from Cyberpunk 2077 with movable magazine and shutter Videos about this model: https://vm.tiktok.com/ZSJBu1mJ2/ https://vm.tiktok.com/ZSJBmwtf6/ https://vm.tiktok.com/ZSJBujJXk/ Print Settings Printer: Artillery…
This model is compatible with the lego system.
My interpretation of Skippy, the AI assistant of the Iconic variant of the Arasaka HJKE-11 Yukimura in Cyberpunk 2077
This is the Relic made for 3D-printing. The "The_Relic_2077" map contains several files. The uses of these files will be discussed here. For 3D Printing: The model is cut into 3 parts. The silver outline, the inner black part and the…
Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…
This model is compatible with the lego system.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
My first model using forms in Fusion 365 - Slowpoke! This is also my first entry into the Sleepy Slowpokes Design Group - You should join cause this website can be lonely sometimes. The print is kinda straightforward, but assembly may be…
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 4-Way Elbow designed to…
This model is compatible with the lego system.
Updated 01/28/2024, 28/01/2024 for the rest of the world. I saw a few comments stating that the mounting/starting chain link was causing collision issues with the side of the printer. I went ahead and made some minor changes to the model…
Print it the same way you hang it, with no support, i suggest PETG with 30% infill and 3 perimeters, you'll also need a way to fix it to the surface you want to put it. Watch the third image to hang it correctly.
Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 07 The toolbox 07 is the smaller version of the toolbox 06. Toolbox with two drawer and top . The drawers has indexing in the closed and open position. To install this toolbox on your 3D…
Build this to add spaces between each piece. It might need some cleanup after printing, as the space tolerance isn't perfect, but it is doing the job. It should be compatible with other Dell OptiPlex Micro models as well, but try it out…
I present a full size replica of the pistol from cyberpunk 2077 with a lots of details. It has a detchable magazine attached to magnets All parts should fit in a regular 220x220 mm 3d printer Print Settings Printer Brand: Creality…
Didn't like the giant printhead housing on my sv07+ but I still wanted to use the factory led for it so I whipped up this bracket on tinkercad real quick to try out, at least until someone comes up with a better one lol added a 2nd model…
Update 5-29-24 Updated 18650 suction cup backs for less supports. ----------------------------------- Update 5-22-24 Uploaded large encoder knob STL that I forgot to include. ----------------------------------- NodeBrix Modular Case…
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
RAK19007 WisBlock Base Board mount with 4mm mounting holes that fits an electronics base board with a 5mm grid spacing.
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
Cover for your Holosun 407C-X2 or 507C-X2 with side mounted battery tray. Print in supplied orientation. Designed to be printed with NO support and minimal bridging.
I wanted a compact box to keep my Fluke 107 together with the test leads in an organised way. I’ve remixed @Whitty’s rugged box a bit to accomodate the fluke meter whilst having a roughly similar footprint to the other compact tool cases…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one! Original…
Okay, let’s see what we’ve got here. The Memo TTX HDR 250; not bad for Zetatech. Damn, I can do a lot with this thing. Ha ha! Gotta tell Ev. Hey girl, it’s me. So that MRAM you hooked me up with? Hella preem! Peeps’ll be lining up halfway…
An indicator to the timemore sculptor 078(s), to help with setting the grind size.
This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…
This print was the result of discussions about the use of DIN rail with 3D printed parts within the following group: 3d Printing for Metalworkers and Model Engineers Admittedly this print is of limited usefulness for the following reason:…
This model is compatible with the lego system.
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are 5-way and 6-way crosses…
Didn't fine any eligent solutions to this problem that retained the ball check valve used for priming the filter. So I made one. 1.5mm holes Print with ABS or PETG. I tested both. Settled on ABS as it looked nicer. Pictured is the PETG…
This model is compatible with the lego system.
Update January 2025 Just a minor update after some feedbacks about a loose fit. It's easy to swap on purpose, but maybe it really was a little to dependent on the seam the old printer made. 😅 Anyways here's a slightly tighter version with…
This is the Arasaka Shingen smart SMG from Cyberpunk 2077 There are a lot of parts for this, especially the scope. I may create detailed and simple versions so that people can choose which they prefer This model is still a work in…
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
Aquarium spraybar for a Fluval 07 series canister filter. I used it with my 207 filter on a 29 gallon aquarium and it produces a low current flow and provides good aeration if placed above water. Laminar flow from the spraybar reduces…
Since I don't have a Microsoft LiveCam 3000 HD and only a webcam with ISO 1222 / DIN 4503-1 / 1/4-inch camera thread. I couldn't help myself and built this model. It is further away from the print bed and elevated. Two different ISO 1222…
This model was based on this work. but it has been redesigned to specifically fit the Dell Wyse 5070. I modeled this with a 0.5 mm tolerance. Print Settings that I use: Infill: 13% Layer Height: 0.2 mm Material: PLA (I know it's not…
This is a custom 3D printable shroud compatible with slim 92mm fans for the Powercolor Reaper AMD RX 9070 XT GPU. Can be printed on small build surfaces, I recommend PETG or ASA material. Easy to print and assemble, you just need fan…
Die Vorrichtung zum Planfräsen wurde während einigen Twitch Streams entworfen, modelliert und zusammengebaut. Sie wird mit einer Kantenfräse Makita RT0700C oder Makita DRT50Z verwendet. Das Planfräsen von Weichen Werkstoffen wie Holz,…
This is a wall mount for the Technical Ferrari F1 car based on the same design concepts I used in my Mercedes F1 mount: https://www.printables.com/model/935748-lego-technic-42171-mercedes-amg-f1-w14-e-wall-moun The aim for this model to…
required equipment power switch of your choice 10000mAh battery gps module ipex to sma connector/wire "soldering/heat shrink m2.5 x 4mm bolts for mounting switch otherwise its the same as the original.
Kličenka ve stylu cyberpunk2077 - Arasaka Doporučují tisknout s tryskou 0.25 vzhledem k písmu. 0.25 nozzle recommendation
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
This is my attempt at the Miltech Crusher from Cyberpunk 2077. I referenced screenshots from CDPR and drawings/pics from Volpin Props. Those guys are awesome, check them out. Modeled in Fusion 360 There is a text file with the bill of…
A redisign of the amazing Prusacaster model. While playing Cyberpunk 2077 I noticed the cool guitars scattered everywhere around Night City, and thought it would be awesome to have one in my collection. This project was awesome as it let…
This model is compatible with the lego system.
I modeled the original base plus two variation when extra surface area is needed when routing
Just a simple mount for Quad Lock with dampeners for a Yamaha MT-07 with LCD-display. It has a structural design and should be pretty sturdy, but I take no responsibility if it breaks ;) It requires a M5 heat insert, I use M5x9,5x7 mm.…
This model is compatible with the lego system.
ripped from the files, edited slightly to be printable best to be printed on its side, with supports
I present full model of a Cyberpunk 2077 character - ADAM SMASHER. This model is ripped from the game by the program Ninjaripper. On the pictures it has ~28 cm (480% scale of the original files). Printed on anycubic photon mono 4k
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
UPDATED >> 07/09/24 >> For MGN12C rail slides only. This is a flat-plate adapter version of “ @NeedItMakeIt ” adapters. I made it light weight too. Let me know if they work for you. PETG or anything that doesn't distort over time / heat.…
Another strange, crooked mushroom. Growing in areas like swamps and forests, this huge mushroom provides cover for one or more units. -- Another "plant" for tabletop gaming and a nice addition to the tables vegetation, which can be used…
I use a lot of Bosch Professional hand machines in my workshop and have a matching FSN 1100 guide rail. Unfortunately, my beloved Makita RT0700CX2J router does not fit this rail. Buying a Makita rail and a matching adapter is out of the…
More here: https://cults3d.com/es/usuarios/DIEGOROLANDO93D/modelos-3d
![LEGO Speed Champions Modular Display Stand [last update 21.07.2024]](https://media.printables.com/media/prints/532084/images/6044190_522b121d-3533-45b1-9d14-b2a10072eb0b_b8c2e7a3-f852-4a50-bf7b-1311d4b55232/sc-2024-3-2.jpg)
![Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]](https://media.printables.com/media/prints/35720/images/1199286_159f781c-d9e2-4896-be13-5668e22d36a3/eatxv3.jpg)
![Conversion kit for the Spine cable chain for the SV07 & SV07 Plus [Fixed]](https://media.printables.com/media/prints/602642/images/4795554_3c8b74be-3e7a-40f7-82f2-7985236209f0_f71f2402-dfc7-4936-b991-5c3a62342dc2/20231003_230737.jpg)
