Counting matching models…
Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
The Messerchmitt Bf 109 (also known as Me 109) was one of the most iconic aircrafts of the Second World War, and is across its variants the most produced fighter in history. It entered service in 1937 and was at the time seen as very…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! Messerschmitt Bf 109 This is another plane for your collection : the Messerschmitt Bf…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET
NACA6409-wing rib. originaly made for throwing plane, just to test its abilities. maybe more versions in the future.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Bonsai display table 09 square 150x150x37mm, support is necessary. Feel free to scale up or down until you like the result and it suits your tree.
Print approx. €16.21–€19.82 excl. taxPreliminary estimate for one variant
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
Second hand Roco N Scale crane came without a mount for the beam on the tender , and the hook was missing. Created a replacement , and fdm printable on slow speed. ( might need a few tries ) made to rotate ( use M2 or M3 boult and nut ) ,…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Audi Box. Filament : Devil Design. Ocean Blue. ( 100% makita blue. ) PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 90c. Support : None. Box_Logo. Filament : Devil Design. Red. Klips. Prusament. Matte Black. Audi. Box. seal.…
Print approx. €4.91–€6.00 excl. taxPreliminary estimate for PETGSource material: PET
Use sensorless homing in your own projects! In this project and associate video I’ll show you how to set up sensorless homing using a TMC2209 stepper driver — no mechanical limit switches required! Perfect for 3D printers, CNC machines,…
Print approx. €3.25–€3.98 excl. taxPreliminary estimate for one variant
This is a stackable case that fits the Marklin 72090 H0 distribution strip. Put the strip in the case and keep it in place with the small circular “lid”. Then connect all your connectors through the holes on the side and close the case…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
MikroTik RB5009 mounting bracket, can be installed either way (0 or 180 degrees) 4 x M4 nut and screw (length 40 mm) Recommended to sand with P120 sandpaper and then glue with epoxy glue
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
Washers to DIN EN ISO 7092 with medium through-hole. For M1.6 ; M2 ; M2.5 ; M3 ; M4 ; M5 ; M6 ; M8 ; M10 ; M12 ; M16 ; M20 ; M24 For the smaller washers up to M3, I recommend a smaller nozzle (smaller than Ø0.4). Unterlegscheiben nach DIN…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Manufactured by Messerschmidt, it first took to the skies in 1935, and saw combat in the Spanish civil war, and fighting until the very end of ww2.
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
This Remix based on SethBon's LED Light Bar. I changed only the dimensions for the alu extrusion to 7x14mm.
Print approx. €6.43–€7.86 excl. taxPreliminary estimate for one variant
A spool adapter to use the Royal Mail P6709 thermal labels inside the Zebra GK420D thermal printer machine. May work on similar machines/labels. Have a great day.
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
Pole mount and housing for ADS-B 1090 MHz PCB antenna https://s.click.aliexpress.com/e/_c3I3thdT You can find the mount for a 25/35/40/50/60 mm pole. Hardware needed: n.2 M3 threaded insert n.2 M3x6 mm button head socket screw n.4 M4 nuts…
Print approx. €8.63–€10.55 excl. taxPreliminary estimate for one variant
petite porte pour pipeline laitier pour valve quadrofix de la marque GEA
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
3D printable box for Wemos ESP8266 D1 mini and 128x64 0.96'' OLED display for Display: LaskaKit OLED display 128x64 0.96 I²C Wemos: WeMos D1 Mini Pro 16MB ESP8266 WiFi Module !!! Be careful !!! This model IS NOT for this display…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
PAL-Übungsaufgabe 09
Print approx. €1.97–€2.40 excl. taxPreliminary estimate for one variant
This is a simple cutting disc holder that you can mount in the DeWalt DCF409 TSTAK insert, and probably for other angle grinders too. You can perfectly carry it with the side handle, if you don't throw around with your TSTAK boxes, the…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
Update 09/23. the original STL and gcode fit the phone too loosly. the current files are a much better fit this is a 3 piece assembly. Body, “CameraRim” and “MagInsert”. The body is TPU, the other parts are PET-G. The Camera Rim provides…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Needed an holder for w1209 without drill into the printer enclosure. So i designed this 120mm fan adapter/holder to mount W1209 enclosure from toastfr35 . For the tidiness of the cables the holder also has a recess for a cable tie. I used…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Pint Settings Material: PLA Supports: Organic support seems to be easier to remove.
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Dále jsou nutné opěrné plíšky 2x. Do okénka příjde plexi o síle 2mm.
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
EN: To indicate protective function of equipment associated with hazards related to ionizing radiation. DE: Hinweis auf die Schutzfunktion von Geräten im Zusammenhang mit Gefahren ionisierender Strahlung.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Replacement cover for GENIUS NX-7009 mouse. The pins on the original one broke of, so I created this. Fits nicely and holds in place. Printed in PLA without supports.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
EN: To identify a manually operated control. To identify the switch position that places the equipment under manual (as opposed to automatic) control. To identify the control that activates manual control. To indicate that the equipment…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Apologies for the absolutely awful photo of the print, the lighting is terrible by the rack. Allows a 9-port Trendnet TEG-S5091 switch to fit in a 19in server rack. Likely fits other network switches, but beware that some of the Trendnet…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for PETGSource material: PET
This platform is made to attach to the main mounting bracket for an Alpine X409-WRA-JK radio for the Jeep Wrangler JK. This platform gives external modules to the head unit and display a place to mount securely, without flopping around…
Print approx. €3.88–€4.74 excl. taxPreliminary estimate for one variant
For the mesh lens .stl or .3mf to print properly so that the insert is the through set: Top Shell Layers to 0 Bottom Shell Layers to 0 Infill Density to 25% Infill Pattern to Rectangular.
This printer profile is a copy of the profile from Bambu Studio (01.02.00.09), with the placeholders and variables adjusted to fit the PrusaSlicer style rather than the Bambu Studio style. The linear advance (flow calibration) is not…
This is a posable model of the ED-209 from the movie Robocop. It is a kit and all the joints are posable. Default color of the model is grey. so if there is no color code at the end of the model name, it means it is grey. G - grey B -…
Patch notes 23/04/2025: Uploaded collum.stl (whoops, that's an important one) This is the v.09 release of my milling machine. Its complex and may or may not be worth your time making. I'm being very honest about that, this mill is a…
This is the final version of ED209 in 1/10 scale. Includes all the parts to make this version as screen accurate as possible. Print at .1mm to avoid excess sanding.
Update Late Feb 2024: We had far too many wrenches on the bench, so we designed this new Allen wrench holder for all nine sizes. https://www.printables.com/model/776625-ufs-155-t-handle-hex-key-holder-allen-wrench-holde . Stop by and…
This is my 1/6th scale ED-209 from the original Robocop movie. I've decided to give it away for FREE. NO reposting on other sites. Consider this a Printables exclusive - else or NO MORE FREE _SHIT for anyone. Also, NO RESELLING OF PRINTS…
Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…
A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…
Printable 3D model. Gengar Nintendo Switch holder. Pokémon inspiration. STL file.
nothing too much to say. the fan is disconnected but the tolerances are tight so it might not be able to spin for you. could be a cool challenge for your printer? you definitely need a resin printer for this, and even still the “fins”…
Spider-Man 2099 Inspired Helmet Enjoy Category: 3D Printing
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
UPD : Added suitable for main body Voron-Stealthburner Thanks to @Ibot_3D for the idea. He inspired me with his design! But his model was a little hard to print and many (including me) could not print this model. I increased the spaces…
This model is compatible with the lego system.
This was designed to work for installation in my 2007 Chevrolet Trailblazer SS. Dash kit prints FACE DOWN with tree supports. I printed with 25 percent rectilinear infill and 4 walls / 4 top and bottom layers on my Bambulab X1C. Be sure…
The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
A wall hook for the Lego Porsche RSR to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are…
12.10.2025 Erweiterung V2.1 für diese Box verfügbar Extension V2.1 for this Box available https://www.printables.com/model/1442675-update-v21-print-box-dry-box-storge-box-102025 21.09.2025 Inklusive STEP und F3D-Files von Gehäuse und…
Recommended to print with PETG.
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
An angled wall mount to allow you to mount the Lego UCS Gunship (75309). This set is notoriously difficult to display due to its large wingspan. This mount utilizes the Lego's original stand mounting location in the floor of the ship, so…
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
This model is compatible with the lego system.
What's this? As seen in my FormD T1 v2.1 video , this anti-sag bracket secures the 4080 or 4090 Founders Edition stock air cooler and eliminates sag. Configurations supported: 3 slot 3.25 slot 3.25/3 slot (top strut in 3.25 slot + 5mm…
Printable 3D model. Controller holder for Playstation, Pokemon Krabby design. STL file.
[09/12] SAGITTARIUS - THE ARCHER Here is complete series of sculpted zodiac signs. All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.15mm ( You can…
Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…
Modeled in Blender. This is my first go at making a plane with panel lines, and I'm very happy with how the model came out. I noticed a lack of good BF-109E models, so I decided to make my own. I hope you enjoy it. It has no particular…
This model is compatible with the lego system.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…
Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…
Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.
This is my rough model of the Tomahawk BGM-109 Cruise Missile.
This model is compatible with the lego system.
The Egg-209 design is inspired by ED-209 from RoboCop. You can rotate the model in your browser. https://a360.co/4rKVhSK I made it simple, no supports are needed for printing ✅. The model consists of 3 parts , the legs are glued to the…
This is a tool less replacement adapter of the SSD caddy of the Atomos Ninja V. No screws or tools are needed in order to use your SSD with your Atomos. Also included is the clip (you have to print two of them) for the Smallrig 2209 cage…
First German addition to the wallart series featuring Bf109. Main enemy of the Spitfire you can find on my profile. Once again simple one-piece print to decorate your workshop, office, locker at work etc.
In order to cool my SB2040 canbus-board (with extruder-driver onboard) I used to have a 30mm fan cover sitting on my Clockwork2 extruder. Now switching to Galileo2, noone seems to have designed such cover, only for smaller 25mm fans…
This model is compatible with the lego system.
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
First German addition to the wallart series featuring Bf109. Main enemy of the Spitfire you can find on my profile. Once again simple, precut print to decorate your workshop, office etc. original size maxes out the Mk3s print bed, but can…
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I tried a few paracord winders to organize my paracord, but none worked as I had…
This model is compatible with the lego system.
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** *** HEADS UP: this is a good model to do comparison test with Prusa's new…
This model is compatible with the lego system.
Treppe für z.b. Playmobil Puppenhaus 70985 Staircase fits for e.g. Playmobil Take Along Dollhouse 70985 Multicolor mit single Noozle - Farben wechsel auf 2,5mm einfügen -→ dann hat der Handlauf eine andere Farbe als die Stiege. → 3mf -…
Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…
This is for the original version of the CW2 main body, won't fit BTTs variant.
Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…
I couldn't find this on Printables. This is not my work; I am only uploading with credit to the original from Thingiverse under CC. Original description from creator: This is a remix of Ed 209 from Robocop by GHathaway. Thanks for such a…
This model is compatible with the lego system.
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
SCP 096. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
![[09/12] SAGITTARIUS - THE ARCHER - Zodiac Series](https://media.printables.com/media/prints/6f972a6a-4342-4cb1-ab48-436260969f1b/images/9948970_d69b01e6-ecc9-4a00-a35d-37ee04c8c704_2379eb41-d013-4e71-ae0f-74fcd634a016/09archer_004.jpg)
![#0099 Latching Poker Playing Card Hard Case [w/Diamond Pattern]](https://media.printables.com/media/prints/589876/images/4716360_968ca957-dbcc-498f-b4db-c3b271dec7ec_2a661ca2-b8fe-4f07-8282-6968b1af301f/20230923_083207.jpg)
