Counting matching models…
Universal Öl-Einfülltrichter- Adapter Trichter Ölwechsel Einfüllhilfe KFZ Adapter für AUDI VW SEAT SKODA (4Pins) 05E 103 485 C bis 31.12.2019 1,5L PR: DS9 / D8I 05E 103 485 J ab 01.01.2020 1,0 Grundmotor TJ4 / TC5 1,5L D8I / T3KJ…
Print approx. €1.85–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
J'ai donc souhaité avoir des connecteurs magnétiques sur le modèle train de Noël icône 10361 qui en était malheureusement dépourvu. J'ai fait un modèle simple, efficace, et rapide à imprimer. L'impression s'effectue avec un remplissage de…
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
A simple stand to display any of the 3 versions of the Lego Back to the Future DeLorean. I printed the stand with PETG to prevent sagging over time. PLA might do fine as well.
Update : 7 May 2024 : Added V2.1, 20mm extra length to reach Bambu rear screw rod 14 April 2024 : Added 2 Caps ! V2.0 : A Simple Screw Rods Adapter for the Superlube 21030 Tube Fit all the 8mm OD 2mm spacing rods Easy to print without…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
Please add your makes when you are done This is a PLA printed 3D part designed by myself in Fusion 360. The wall mount is multi coloured to help it blend in better with the wall and the wheels. Only 1 fixing is needed into the wall. I…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
The VAZ-2103 Zhiguli is a deluxe compact sedan car ( small class, passenger car, model 3 in the Soviet classification ), produced by VAZ , introduced in 1972 and produced until 1984. Better known by its export name Lada 1500 outside of…
Lego 10300 (Back to Future) stand, the individual parts must be glued together.
A mini brushless drone frame (90mm from motor to motor) that doesn't need any screws - everything is held together with zip ties. The frame is ready for standard 20x20mm flight stacks such as HGLRC Micro F4 V2 and similar. The frame comes…
This is a remix from the excellent and highly detailed model by Burning_Bridges : https://www.thingiverse.com/thing:3067279 The original obj file was not printable as-is. So, I did extensive repair to it to make it printable. I have also…
For those that follow, you will be glad to know that I have made this without telling the full build story, as I did with the last build. Hopefully I have learned from my last experience/struggle, (see "S160 Loco"), and there will be…
Fingertip mod for Logitech G103/203, inspired by OptimumTech's Zeromouse. Changed some things to allow usage of side buttons, scroll wheel and clamp for strain relief. Total weight is around 40g with PLA. 35g for side-buttonless version…
Requires 2 x Lego Connector Peg/Cross Axles and connects to the wall via a single screw. Prints in current orientation with no supports. Please note the layer lines are running in the direction of the stress forces so print with a strong…
A simple mount that I designed in OnShape that let's you hang your Lego Ornithopter to the wall by the landing gear. I printed mine in PETG CF, but I'm pretty sure PLA would hold it just fine. It secures the Ornithopter to the wall,…
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
Model should be printed in specified orientation without supports. Requires 2 x Lego Connector Peg/Cross Axles and requires 2 x screws to attach to a wall The storage easily fits all extra parts for the model Please note the layer lines…
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
Lego Back to the Future Delorean (10300) Stand This stand works better with LED kits by grabbing the outer portion of the rails. Also works well if you don't have an LED kit of course. 15 degree forward tilt, 5 degree side tilt Forward…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
Here is a diamond shaped lamp shade design with triangle shaped light and dark patterns to allow soft light on the corner of a table. There are no wires to cut, splice or solder together to make a light base. It is designed to fit on a 4…
This model is compatible with the lego system.
2023-01-03 Update: Ich habe eine 25,4 mm Version hinzugefügt. 2019-01-10 Update: Ich habe jetzt noch eine 35 mm Version hochgeladen. Das ist eine Fahrrad Halterung für das Garmin Edge 1030. Es muss nur noch die mitgelieferte…
This model is compatible with the lego system.
Everyone wants a custom wheels for this MP4/4 Lego set are same reason… However, I can't found a after market parts, so I carry on my first try. Project characteristic Blender based project. Referenced to a lot of MP4/4 public source. My…
I printed it on ordinary cr6 se with standard PLA. I have used 0.16 layer for better resolution of marks and numbers.
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
This model is compatible with the lego system.
This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…
Printed in PETG with a 45 degree tilt for greater resistance. The stl file is already placed in the correct position. - Enable borders - Activate organic supports - Gyroid filling at 20%
This model is made in a cooperation with Fwartstckr ( https://www.instagram.com/fwartstckr/) and we decided to make it to an open source design. We hope that you will like it:) Pictures are taken by…
I was looking for a way to just use a nozzle to grease carriages while still on the linear rail. Lots that allow you to grease round bearings, like the one that this was remixed from. So the smaller one fits in the hole, in a linear rail,…
I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103" - a high-performance 3D printed BCAR (Barrel Contact Accuracy Rig)…
This model is compatible with the lego system.
Public domain model of the Space Shuttle Discovery, from the collection of the National Air and Space Museum. Originally uploaded to the Smithsonian 3d digitization archive .
Bližší informace o modelu na stránkách Lega nebo v aplikaci LEGO Builder. Zkompletováno z různých zdrojů na internetu, popřípadě navrženo ve FreeCadu.
When this little beast lands on rooftop, this piece can easily break. I designed a spare, much stronger part. Fitting perfectly with 0.2mm layer height print. Make sure you slice with 100% infill. No need for supports. No need for raft or…
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
The old Audi / Auto Union Odometers are known to fail, while the speedometer is still working fine. The reason for that is a white plastic gear in the odometer, spltting/cracking and slipping on the shaft that turns the digits. This…
A wall mount to mount the Lego Star Trek Enterprise D 10356 onto a wall. Includes a drill/positioning template Struts are slightly angled towards the wall. To change the layer direction, the model is cut into three parts, to print them on…
Battery up to 10mm x 36mm x 65mm
With this model, the specific kitchen scale can be neatly stored for example under a cabinet. Attaching can be done with a double-sided tape. Print instructions The provided model is for one side. Mirror the model in slicer for the other…
X gon' give it to ya. Feel the relentless dread of being pursued with this massive figurine of the T-103 Tyrant, known to fans as Mr. X. Dropped into the R.P.D. with a single objective, this B.O.W. is the epitome of an unstoppable force.…
Lego Concorde 10318 wall mount I only put 2 screws in main support no fixation needed for le head support
Quick model I made to replace a broken thread thee on on a Brother 1034D overlock machine/serger. Same layout & spacing as the original. Slight modifications made to enable printing without supports, bar shifted to the back of the post.…
Need a replacement for your Brother 1034D Serger's lost or broken thread catcher? Look no further. This design incorporates a sturdier retention tab than the original to keep the basket snug against the body of your serger, and even…
Lego 10337 Lambo Countach wall mount. Use two leftover pin connectors from build to put into bracket. (See photo) Print Settings Printer Brand: Prusa Printer: MK3.9S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Prusament…
This model is compatible with the lego system.
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
Designed to match Large size Command strips. Lego style adapter to connect into the bottom of the base mount for the car. Print 2 mounts and click into the locations shown. There are two mount lengths depending on the offset you want from…
This is a replacement gear for the Dyson V6 motorized brush head. There was a number on my original gear: “T103310 2B”. I do not know if that is a model number or not. It goes inside the motor assembly and connects the motor to the brush…
This model is compatible with the lego system.
LEGO set 10330 McLaren Senna Formula 1 car tyre with logo's and no number My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original F1…
A project inspired by this forum topic , it allows you to use a standard USB power source with a Garmin Flush Out-front mount, Triathlon mount and probably also mounts from other brands that are compatible with the Garmin Flush Out-front…
The shelves for small LEGO flowers are available in three different combinations, allowing for versatile adaptation to any space and display style. Each of these versions also includes a variant with a mounting hole, making it easy and…
A slightly larger D10 part for Tamiya F103 to accommodate stardard 2S lipo batteries.
This model is compatible with the lego system.
T-103s possessed intelligence close to that of normal humans, and could follow orders impossible for more primitive BOWs. Consequently, the T-103 models were used as bodyguards, assassins sent to hunt specific individuals, Umbrella agents…
Parts for wltoys- rc cars
For my shelf, I needed a smaller stand for my LEGO 10356 "Star Trek: U.S.S. Enterprise NCC-1701-D" build. This stand is shorter and angled 10 degrees to the side to avoid only support the one side. A hole is included to slide the plaque…
Poussoir de remplacement pour robot KitchenAid.
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
This model is compatible with the lego system.
This uses velcro command strips to mount these cute little Lego plants to the wall. I printed them on their side with organic supports on each Lego style post so they maintain their shape and fit well with the Lego base of the plants. You…
I bought a used GPU for my arcade build at a price that I couldn't pass up. The only issue is that is was missing the Low Profile Bracket with it. Fits this GPU Graphics Card: BTO GeForce GT 1030 2GB GDDR5 Low Profile Graphics Card This…
Really liked the original use of the GL2103 HEPA filter into a 120mm fan solution. In trying to adapt the first set of files, it didn't work well, so I went to OnShape and re-drew everything. This is very handy to say the least! I used…
Router table inserts for the Skil Router Table (SRT 1039). I wanted more than the 3 inserts that came with the table and give me a larger assortment to support the work piece better for more bits and a small basic tray to hold them in.…
Print in PETG using lots of walls and strong infill patterns. Then do a stress test trying to break the mount. If it doesn't budge, carefully use it on a bike.
De Stridsvagn 103, ook wel Strv 103 is een Zweedse main battle tank en een uniek voertuig. De tank heeft een schuin voorpantser, dat lastig te doorboren is. Ook bevat de tank een 105 mm kanon met autolader, waardoor de herlaadsnelheid…
I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103 slim" - a high-performance 3D printed BCAR (Barrel Contact Accuracy…
I used the following settings: printed on the side, to have forces pulling the layers apart 0.2mm layer 3 walls 30% cubic infill manual support for the mounting holes I added a simple drill template. Two screws per bracket is properly a…
This is a remix of Codex's mounting bracket for the SCPH-10350 version (and possibly other versions) of the PS2 Network Adapter for use with the SATA upgrade board. I printed the original model and it came out a little strange on my X1C.…
Abfallbehälter für die Overlock von Brother 1034DX
I remixed the LEGO Ornithopter Stand from sherlocked (see below), as his version wasn't what I wanted. I found it unpleasent to glue the parts and also the ankle was to steep for me. So this will print in one piece and is more upright.…
My brother plays warthunder a lot and needed a gift for his friend so i made the cheese wedge stridsvagen/strv 103 in tinkercad and printed it in yellow and blue PLA. The one in the picture is scaled to 200% and is 26.8cm long, 100%…
A wall mount for the podium in the lego mclaren mp4/4 car
I've been using the Heltec T114 with the great 3000 mAh case from Printables, and I really loved that design format https://www.printables.com/model/1451567-heltec-t114-3000-mah However, I ran into two problems: 1. The case was still a…
Simple but strong EcoTank ink holder. Holes are little bit bigger to make possible to hold new ink with protection bag on it. Model has engraved letters to determinate the color of bottle in same order as in my Epson L3251 printer. Its…
This case I design houses the Aurora Lily58 from splitkb.com and has space for a 103040 Li-Po battery with 1200mAh. You will need 12mm standoff from the Plate, through the PCB to have enough space to clear the battery. I attached the…
Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…
Simple model created to replace missing thread spool caps on a Brother 1034D overlock machine/serger. Pretty much a drop-in replacement for the caps that come with the machine. Should print fine with any material and settings w/o the need…
I made a template insert for the Pelican 1030 case. Mocked up in Tinkercad, please modify for you own use. I use my Pelican 1030 for my darts storage, so I will be lopping off much of this template and adding holes in the side to put my…
This is a model to hold Lego flowers or other brick flowers or other Lego items may fit. Mount with strong double sided tape or glue a magnet.
These are the End Caps I created for the aluminum fence extrusion I used on my mitersaw bench. They are a nice tight fit so they won't fall out. This extrusion is 1" x 3" and it is available from the following link…
Overview This wall mount is keyed for the stand that comes with the Lego set, making sure that the ship cannot move side to side. Printing This is a tight fit but works well on a 180x180mm build plate Both mounts are NOT identical, they…
This is a replacement for the stock part 55620-89103 . It uses the original carriage for the cups and the s shaped bar. I have confirmed the design fits and the cup holder works. This design improves on the locks in the back by using…
Ein Ersatzteil für die Pfaff Nähmaschinen der Tipmatic-Reihe. Auf den Bildern zu sehen ist der originale Garnrollenhalter von Pfaff. Mein Teil kann diesen ersetzen. - A spare part for the Pfaff sewing machines of the Tipmatic series. The…
Compact case for a Xiao NRF52840 + Wio SX1262 with a 2000mAh 103450 cell. There are 4 mounting options: Without switch: 1 - XiaoNRF with the original adhesive antenna. 2 - XiaoNRF with Ipex-SMA pigtail. With switch: 3 - XiaoNRF with the…
Wall mount for the popular Danish toymaker's 10327 Arteides Royal Ornithopter set. You will need 2-3 8 stud wide axle for the assembly. Please check my other model for straightening the wings when the copter is mounted on the wall:…
This 3D print is the emblem of the VFA103 Squadron of the US Air Force. 17x17cm | 6.70x6.70in Wikipedia link There are 3 files. One for each color. The pieces interlock with each other. There is not too much need to force the banners with…
This is a static model of the Grob G103c Twin III, unarguably the best training glider ever designed and built. The model comes in a ready to use bluid plate. If the outer wing parts are too difficult to print straight up, it might be a…
Frame for utilize with spare motors 1103 -11.000kv of Betafpv Cetus X
Made for keychain and/or Tabletop display Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super…
![Garmin Edge 1030 Bike Mount [Fahrrad Halterung]](https://media.printables.com/media/prints/10390/images/86293_44a7b17c-f483-4dda-a10c-7fea02d85520/unbenannt1_10390.jpg)
