Counting matching models…
EN: This is my seamless Peg Board V3 (#0111). The mounting screws are countersunk. All holes are useable. Minimal support is required (Tree Support). I have added a single pin so that you can quickly design your own holder. Just add them…
In honour of Pokemon Go's February 22nd Community day I have knocked up a Rhyhorn one piece and multi-material model! Definitely needs supports! Print instructions Category: Creatures
This Adjustable Angle Gun Holster is specifically designed for the Taurus PT-111. With its unique adjustable angle feature, you have the freedom to choose a custom angle for mounting the gun to your hip. Whether you prefer to use it with…
⚫Zetor Crystal 8111⚫ Zetor crystal 8111 + new details update for all crystals !!! I guess no one expected it, not even me, but I decided to improve the crystals after so many years. What's new in the update? ▪ The sides where the door and…
I created this STL to help fit my Asus Ryujin ii 360mm radiator in the top of my Lian Li O11D Mini case. By default, this case is not made to support that large of a radiator on top. Lian Li sells a bracket kit to do this very thing but…
About the F-111 Aardvark The General Dynamics F-111 Aardvark is a retired supersonic, medium-range, multirole combat aircraft. Production models of the F-111 had roles that included attack (e.g. interdiction), strategic bombing (including…
extended magazine for the p111 taurus
This Project contains the files for my “SN-6” F-111CSB Prototype. It has already been flight tested successfully. Specifications: Channels: 3-4 Wing Span: 83cm Weight: 600g (300g printed parts) Thrust: 700g T/W Ratio: 1.17 Battery: 4S…
The F-111 Aardvark is a variable-sweep wing, supersonic, attack/bomber aircraft developed by General Dynamics. It entered service in 1967 in the USAF, and 1973 in the Royal Australian Air Force. With complications holding back the D…
This Thing is a modified version of jsirgado's caster, with wheels of my own design, to fit my Broyhill model 41119 office chair (well, that's the model number used by "True Innovations", the supplier; it's actually a "Wal*Mart fall-apart…
What up nerds, here's a plate to add an optic to your sweet Taurus G2/G2C/PT111, etc… It dovetails into the stock rear sight mount, and uses the original screw to make sure it doesn't slide out on ya. I have the spacing for a cheap…
This model is compatible with the lego system.
Separated parts to print in different colors. (I'm horrible at coloring/painting solid pieces) Should only need to print 2 files: "main-plug" + "center-pipe-start-end" Smaller layer height & slower speed & higher fill for pipes/center…
I saw the F-111 from Captain_Ahab_62 and liked it. I found out that his version would print full size nicely at a 45 degree angle on my FLSUN Q5 given it's smaller bed size, with minimal issues with the supports coming off. I tried…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Yes, lots of bit holders are available to download,…
This is the First Night set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
The ÖBB 1116 is part of the Siemens ES64U2 family of electric locomotives. It is also known as the Taurus and is widely used in Austria. This is one of the first 3D models I created in Blender, so there are still some minor issues. Some…
A wall mount bracket to Click-in the Bosch AL 1115 CV battery charger, with an additional cable holder to roll up the cable when not in use. To take the charger with you, just click it out of the bracket. Use three 3.5mm countersunk…
Better to print with PETG 99% infill for the blades. and 40%+ infill for the main body. Print the items separately better.
Für den Druck habe ich PETG Prusament verwendent. Nun schon einige Monate im Fahrzeug verbaut und hält ohne Probleme. Ich habe es auf meinem Prusa XL Multi Tool gedruckt mit standard Einstellungen. Die zwei Nasen habe ich nach dem Druck…
Holder for Bosch 12V Charger AL 1115 CV for the Multiboard The holder for the charger is designed for use with the Multiconnect System by @DavidD for Multiboard. The holder has been tested with my AL 1115 CV and should work with similar…
This is my model of the Airbus A320 Flood Light Panel for my future homecockpit! VISIT MY COLLECTION “A320 COCKPIT” FOR ALL CURRENTLY AVAILABLE MODELS! The goal is to make an accurate replica, so if you have any specific data on the real…
This is the actual Fusion360 file. it has: 1. The AXIS aluminum mast modelled (my own) 2. The Flipsky 65111 motor modelled (my own) 3. The folding propeller (propeller from another design, the propeller holder my own model)
Add a touch of humor to your home with this creative 3D model inspired by the legendary "La Linea - Balum Balum" animation from the 70s! The minimalist yet expressive character appears to interact with the switch, socket, or button,…
they are thicker than the orginal scales but you can scale them down if you want.
Komboloi beads for type 1 (100) Paracord and lanyard beads for type 111 (550) paracord. Set of beads in different sizes to print your own komboloi. Also added 4 basic Paracord 550 lanyard beads (But are no use in the komboloi bracelet)…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
EN: This is my Universal 4x3 Holder for seamless Peg Board V3 (#0111). Support is required (Tree Support). DE: Dies ist mein Universeller 4x3 Halter für mein nahtloses Peg Board V3 (#0111). Es wird Support benötigt (Tree Support). Links:…
The bracket is angled so that it points centrally to the print bed (when placed at the top). Mount it to the top right of the tophat and adjust the position before fastening it. You need the following parts: 4* RX-M3x57 threaded inserts…
Sized using K11 model from: FIIO K11 DAC | 3D CAD Model Library | GrabCAD Printed with supports in mounting position with PLA-CF.
This parametric boom extends the length of the standard camera mount by any size you want. The parametric OpenSCAD model allows setting the length and fine-tuning parameters as needed. …or simply use one of the STLs I've rendered for you.…
Realice este modelo para quienes necesitan imprimir números
Part Number 11141716134 Holder Part 11141716134 was found on the following vehicles: 3' E30 (01/1982 — 04/1993) 5' E28 (11/1980 — 01/1989) 5' E34 (06/1987 — 10/1990) Z1 Roadster (07/1988 — 06/1991) You can purchase an original one from…
Hi ! I finally received my tester ESR T4 from Aliexpress, I started looking for a box for this small circuit. After having printed and tested several boxes, I was disappointed because they were either difficult to print or not very…
This is a remix to put them all inside a case.
This is a battery organizer. I wanted to organize my batteries. So I designed a battery holder to store different batteries. The battery organizer can hold 111 batteries. Works great for AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032,…
WARNING: This model fits 111.75% Scale Up model of the SL_ST Cyclone. (I scaled up the original because my vacuum hose diameter fitting is 44.7mm rather than the 40mm.) So if you printed the SL_ST at its original scale, you would need to…
This is the Dungeon set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights. I my case I wanted to fit specific tunable-white LED spots from ConstaLED into an “Ronka” luminaire from Arcchio. I…
A durable plastic fastener designed to securely lock the hood prop rod in place. Resistant to engine vibrations and high temperature changes.
A Miniature of the SN-2/3 Prototypes of my 3D Printed F-111 project. A Video Series for the Project can be found here: https://www.youtube.com/playlist?list=PL1SFkJw_IdBfy1o2EyeMoZZ80XDKZUQrC Intended print size is 15% scale (file loads…
Käfer, 914, Typ2 Radmutternkappe SW 19
General Dynamics–Grumman EF-111A Raven Wall Art Silhouette model. Adjustable size. I accept model suggestions.
I decided to make a replica of the Galant desk connector from Ikea because in moving I lost the desk originals. On the internet you can find models only for a fee or 3d prints for a fee. I decided to replicate such object hoping it will…
EN: This is my 3D-Lac Holder for seamless Peg Board V3 (#0111). There are two little extra compartments to store small parts. I use it for thermal paste. Support is required (Tree Support). DE: Dies ist mein 3D-Lac Halter für mein…
Came across this post on reddit , where a user created a custom PCB with the following sensors : Sensirion AG SHT-40-AD1B Temperature and Humidity. Sensirion AG SGP41-D-R4 NOx and VOC. TDK ICP-10111 Barometric pressure and temperature.…
Two STL one logo and one NO logo. For logo to come out recommended a smaller nozzle and/or quality print settings. Remix of Part Number 11141716134 To make it stronger and thinner in the engine bay. Less slop in the cable moving around.…
This bushing mounts on the radiator and then sits on the radiator mount. It's used on a lot of 90's BMW's OEM part number: 17111178412 Print in TPU! 3 Walls, 30% gyroid infill
Ein Ersatzteil für die Pfaff Nähmaschinen der Tipmatic-Reihe. Auf den Bildern zu sehen ist der originale Garnrollenhalter von Pfaff. Mein Teil kann diesen ersetzen. - A spare part for the Pfaff sewing machines of the Tipmatic series. The…
I got one of these storage controllers for cheap, but it didn't come with a low profile mounting bracket! This design uses two M3 screws, but clearance may need to be adjusted for different printers/filaments.
I used: fibre reinforced ABS 20 % infill 4 outer wall thickness 0,4mm nozzle no support but slower outerwall speed Might also work with generic ABS/ASA/PETG
Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…
Flashadapter fuer Gosund_SP111 oder baugleiche WiFi Steckdosen. Category: Household
See https://www.amazon.com/AMS1117-5-0-Step-Down-Voltage-Regulator-Module/dp/B078BCCDN1/ref=sr_1_7_sspa
Radio Support Bracket for E30 to support the radio from the rear. Part number: 65111370841 Only tested on my US model 1990 325i left hand drive with CM5908 radio. Best to print sideways like in picture with organic (tree) supports. Source…
This model is compatible with the lego system.
Bloques compatibles con sets lego Basic-brick
This is a stand for a Brother QL-1110 label printer with magnetic attachable tub. You need 4 8x3mm magnets for the holes at the front. You can glue small TPU pads at the bottom for a better stand. Update V2 08.2024: added a longer version…
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
Introduction This is a 6mm (1/4 inch) hex-bit driver I made for my 111mm Victorinox SAK. It will only work with 111mm Victorinox knives, but I will make one for 91mm ones as well once mine arrives. I tried to make it as durable and…
I saw this model ages ago and liked it. But the artist only provided fix version of the model, either forward or swept. Being a key feature of the F111 was it's ability to swing its wing I always wanted to update this model with that…
Hikvision base, one tilted by 14°, one normal. With hole for a PG16 grommet for ethernet cable. Included small grommet/end cap for microphone cable, if you have "-IS" version. A low ring is for testing. Layer 0.25mm, Nozzle 0.4mm, Infill…
NIX63111 Motor mount brace for RC10 Graphite. Fits also NIX91.
This model is compatible with the lego system.
Kitchen Sink Drain Cover / Strainer – Ø111 mm This is a 111 mm kitchen sink drain cover that I designed from scratch in Tinkercad. It is intended to fit standard sink drains while providing a simple and functional design that is easy to…
30mm Kopierring für Makita Oberfräse gedruckt in PLA+ passt und getestet
It is a replacement part for the parts 130650 and 121111 They are the same part with diferent colors
Seeed Studio Wio Tracker 1110 case. M3x20 screws for hinges and clips M2x6 for OLED and Air530 M2.5x4 for mainboard
Print how you see fit. I printed mine with PET-G, the geometry makes those more or less 100% filled. Probably don't do this unless you are already full of microplastics. Also not verified since I can't bake
Goemon Ishikawa XIII - Lupin 111 - Wall Art
Hard shell case to replace the bag tha comes with the Leica GMP-111 Mini Prism
Размеры посадочного места на картинках. Печатал АБС пластиком, заполнение 15 процентов. Можно печатать и другим пластиком, усадки будет меньше, просто садится будет плотнее Быстросменный резцедержатель, AXA QCTP 250-111 250-101 for WM210.…
Originally published here: Samsung J1 Ace j111 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file…
Replacement part for John Deere mowers/tractors. Print in ASA as minimum. You can use my parametric to make your own: https://www.printables.com/model/1348321-parametric-flanged-bushing-sleeve
These ears hold up well over time. and are inspired by the 110 shape. The counterbored ear hole requires support material but nowhere else does.
The SEEED Meshtastic Tracker 1110 Dev Board comes with a 1000ma battery and no display. I typically hook up a lot of sensors to this board. I thought I'd make a slim case for just testing the radio. SEEED Wio Tracker 1110 Dev Board for…
If you want to know how a space-frame looks like where all the struts run in the [111] directions (miller indices) then here it is. Directions where the corners of two dual tetrahedra point to like so:…
I am back once again with a replacement part for my Umlo V111 rechargable stick vacuum! The original HEPA filters are no longer available for purchase, so I had to come up with a new solution. This replaces the original HEPA element with…
My father in law asked me to print out replacement feet for an ironing board ordered from Amazon that came with 2 of the protective feet missing. They had tried to return the ironing board when it first arrived with one foot missing but…
A replacement disassembling latch pin For the Tarus Millennium G2. Mine flew away while I was doing some maintenance. I recommend using a solvent resistant material like nylon to print it, but PLA should be fine.
Based on Zack Freedman's Gridfinity model. A Gridfinity 1x3 organizer designed to hold two 111 mm knives. Good for storing and protecting knives like the Victorinox Swiss Cheese Master and JJ Barretos in a modular system.
Mount for DLE 111cc or 120cc engine ignition module. Printed in PLA with or without supports.
Version standard available : without Atmos mount I took the original Cooler Master model and added the Vault 111 door from the game Fallout 4, which is my favorite Fallout game. You will find various versions for this model, with…
Lost the rubber foot on my CRAFTSMAN CMST11154 Metal Saw Horse. This is a close approximation of a replacement. Printed mine in PLA and needed just a little persuasion to get in the leg, but it's never coming out again. You could easily…
The first thing that was broken was the wheel holder. At least the Caliper worked without the wheel.
This is bushing for the upper radiator mount. You need two of these. Part Number: 17111150984 Print using TPU! 3 Walls, 30% gyroid infill
Taking ThePlanetMike's excellent little Neighborhood Trolley as a base I remodeled the carriage to match that of one of Dunedin's Cable car carriages, Mornington #111. Dunedin was the second city in the world to have cable cars, following…
You can hang your soundbar on the wall with this. The 001 model has 15mm clearance to the wall, the 002 version has 45mm clearance. If you need more clearance drop me a message and I will add it. Design files:…
CZ: Šablona obsahuje 5 otvorů pro označení míst, kde je nutno vrtat (4x díra 4,3 mm a 1x díra 44 mm). EN: The template contains 5 holes for marking where to drill (4x holes 4.3 mm and 1x hole 44 mm).
Mein Design #0206 ist ein kleiner Halter für mein Peg Board V3 (#0111). Der Halter ist für kleine Flaschen mit max. 32mm Durchmesser. My design #0206 is a small holder for my Peg Board V3 (#0111). The holder is for small bottles with a…
New version with better fit and thicker walls for more strength. This is for any printer with a door that has a gap at the top of the door. Mount for a Tapo C101, C110, C111, or C110P2 camera.
The main criteria for this design was to prevent ingress. No charger port or screen port. It has enough room for the board in a 3000 mAh battery. I designed this to be printed on a smooth build plate so the two halves can meet with the…
What up nerds, here's a plate to add an optic to your sweet Taurus G2/G2C/PT111, etc… It dovetails into the stock rear sight mount, and uses the original screw to make sure it doesn't slide out on ya. I have the spacing for a cheap…
Just a clip to replace 51 44 7 111 532 part from BMW. Break off the modeled in support after printing Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: eSun ABS+ Black…
Le fichier source provient d'Open Forest Data => https://dataverse.openforestdata.pl/dataset.xhtml?persistentId=doi:10.48370/OFD/DCZPUO mais contient des erreurs. J'ai donc corrigé le modèle pour le rendre imprimable en 3D. Identifiant…
For the realization of this small box you will need: USB converter: https://www.gotronic.fr/art-convertisseur-usb-serie-ft232rl-gt1125-26140.htm Wires with their X6 connectors of your choice. Model used in my case:…
A solid wall mounting support for for rectangular 111x54mm ducting from Hornbach. I can be used even without lid. Tips: Print on the side, any material is good PLA, PETG … Use two 3.5x0.5mm screws (you can clip the tip of a longer one)…
