Counting matching models…
New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This is a replacement batter cover or cap for Mitutoyo Calipers model 500-138. The identified Thingiverse model was used as a baseline for this remix. I used eSun PLA+ as filament and it seems to be robust enough for the small clips on…
This model is compatible with the lego system.
Anschlagschiene 1727 für Leitz Locher 5138. Getestet mit Locher 5138, sollte aber auch mit folgenden Lochern kompatibel sein: 5005, 5008, 5012, 5022, 5038, 5132. Update 20.11.2024: Ich habe das Modell überarbeitet und einige neue…
This model is compatible with the lego system.
Tested and printed without issues using Cura slicer. Hello everyone, I've prepared for you this model of the Czechoslovak heavy-duty truck Tatra T-138/T-148 S1 in 1/18 scale with working steering, suspension, dump bed, doors and bonnet.…
This is my first ever published model, and yes, it's literally a square with a hole in it. I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to…
Enclosure for DSO138 digital oscilloscope
UNIVERSAL GREEBLIE COMBADGE #1138 by Bruce Wright (unlimited edition) A very geeky item, if you know what the Universal Greeblie is. Perfect for Batuu-Bounding in Star Wars Galaxy's Edge in Disneyland or Walt Disney World, this…
I added a new design to the existing box as a cable holder. I added a minimalistic handle to make the lid easier to use.
Fits front and back of the QS138 90H V3. I designed and 3d printed this model before sending it to a laser cutting service who cut a thick sheet of mild steel and bent it in the right spot. I will end up welding this onto a plate on my…
This model is compatible with the lego system.
I made a protective case for the DSO-138 diy oscilloscope after soldering it. Thought it might look pretty with accents, though it prints just as well without them. Button and slider annotations are pictogramic representations of their…
Made texts a solid so you can print it on a MMU printer. You can also print it on a regular printer but you would need to make a few manual filament changes. (set your printer to multiple extruders, slice it like for mmu and put M600 to…
An enclosure for the DSO138 oscilloscope with room for a 9V battery. Print Settings Printer: TronXY X5S Rafts: No Supports: Yes Resolution: 0.25 Infill: 15% Filament: Generic PLA Any Category: Electronics
A minimalist WC door hanger , inspired by the iconic single-line aesthetic of the 1970s cartoon La Linea . Its clean, playful silhouette and clear toilet symbol make it an excellent fit for homes, hotels, offices, gyms, and wellness…
This model is compatible with the lego system.
Just a relatively straight-forward replacement part for the rear fender holder/attachement of (among others) SKS Velo Mountain 65 mudguards. My GF does not treat hear MTB with the greatest care and once the original ones snapped,…
This is the inside plastic of light switch. I have bought another in car spares and it was worst than mine. The design it's not perfect but it works very well and the light warnings stopped :) IMPORTANT, when assembling the part: Be…
A replacement paper guide for a Leitz 5138 hole puncher
Movement holder for Seiko 6138/6139. You may need to adjust your scale settings on your slicer depending on your filament settings and how much shrinkage/expansion you get. Printing this with PLA worked just fine for me though! Center…
EleLab_v2 DSO138 For general information and building instructions about this project please see the Github repo ! Also check out the collection of the whole EleLab system here ! The EleLab system is a low cost, modular elctronics lab…
Sturdy version of http://www.thingiverse.com/thing:779159 . Walls thicker. Battery compartment for 8x AA batteries (lasts longer then a 9v cell, use rechargeable batteries to not exceed the 12v max). Foldable legs. Reset button is flush…
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
This case attaches with slightly longer bolts in the rear of the oscilloscope. Keeps all pcb layers, just added to rear and provides side covering. Much easier to use and hold now.
3 Teiliger Zapfhahngriff aus PLA, gedruckt auf dem Ender 3 V2, Einzelteile mit Sekundenkleber zusammengeklebt, Mutter M10 Inlay mit Sekundenkleber eingeklebt, Passt auf Zapfanlage mit M10 Aufnahme
A few years ago I made a small, poorly made box for a Tang Band W5-1138SMF 5 1/4" subwoofer plus two 6 1/2" radiators. It worked and sounded alright but now that I have developed better CAD skills and understand the modifications I wanted…
Printable 3D model. Omanyte headphone stand. Pokemon inspiration. STL file
I updated the back of the Scope stand to include a 9V battery. The front part comes from https://www.thingiverse.com/thing:959009 Category: Electronics
Thanks @ButteredWaffle_ for the original design! I have added space for a 9V battery to the lower case (had to increase the height by 5mm). Wiring is self-explainatory, use the switched pin of the DC plug in order to not blow up the…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Description An improvement of the original model by Peťas . Did one because I urgently needed some more or less rigid enclosure for my DSO138 and had very little colored plastic for the labels. Also added a light guide for the trigger…
It's a replacement cap for DC24 wand upper handle. Print it out with the flat part (top) against the plate, and pop it on.
Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…
model - PETG , vrstva 0.15 mm varrianty ASA,ABS,PA,PC…..
This model is compatible with the lego system.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an Imitation of the 20 x 138 B Solothurn cartridge. For Flak Cannon caliber 20mm. The cartridge is suitable for exhibition, decoration, or perhaps as cosplay.…
This is almost the same design as the bracket ( 076-1386 ) used when the CTO option's Apple SSD is inserted. The SSD and Housing fixation use the 2.5-inch drive screws used in regular computers (Very important! It should be for 2.5…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** A quick remix to add shoulders to create a snugger fit…
Sci Fi Movies - THX 1138 - 1971 3D printable model.
This is a case for the Sainsmart DSO138 Digital Storage Oscilloscope board. All switches are accessible. The range slider switches have extenders on the left. Function push buttons on the right are molded into the case. Probe and power…
Protect you (toy) oscilloscope! Has cutouts for power, ventilation, and all buttons. Printing Instructions Printed from PLA with high infill and no supports. Consider printing the buttons and switches separately with brims.
This is the interior part for a E21384 bay window lock (the pins break too easily and don't close the bay). We replaced this thing by another one that cost him almost 30€ and broke again in less than a year. So i tried to design one a bit…
This is an DSO138 Akku Case for the "DSO138 Simple Case by chibikuma2 " https://a360.co/2Nlzro4 Needed Parts: 1x Battery Charging/Protection Board 1xAdjustable Boost Module 1xMINI Switch 15*10 2 Pin 1xcapacitor (i just 1mF but it is to…
Jewelry Gold System Hydraulic Piston TPU seal, I.D. 138mm O.D. 158mm Especially designed for Jewelry Gold foundry machine, it's usable for all hydraulic piston that need a spare seal. You can scale it as you prefere to get a customized…
If you leave a fridge or freezer sealed shut for weeks in storage, it goes musty and mouldy. Most campervan fridge doors have a built-in "vent" catch that holds the main door slightly open for exactly this reason — but the internal…
Stihl C26-2 TrimmerHead Eye let Fits - Boccola Guida Filo - OEM 40027138307 - Mowing head AutoCut 26-2 Part Number 02640 Recommended filament: ASA - PA - PACF - ABS - PC COMPATIBILITY INFO: FS55 FS56 FS80 85 70 FS74 FS76 90 FS94 FS100…
Electronics enclosure for: DSO138 Oscilloscope ( https://www.aliexpress.com/item/32777588244.html ) LCR-T4 tester ( https://www.aliexpress.com/item/32680013678.html ) PWM signal generator ( https://www.aliexpress.com/item/32962154918.html…
I wanted to replace 2 of my old DS-2CD2142 cameras with DS-2CD1383G2-LIU, but wanted to reuse the existing mounts. The new cameras are smaller than the old, so I created an adapter. The 3 holes for nuts in the top are a tight fit, which…
Adapter to use Pfaff low shank presser foot on Pfaff 138 Printed in PETG with 100% infill. Hole is tight but with some pressure original screw can be used. I tried the fit on my 138 and it was ok. Made some changes in second file: hole…
If you leave a fridge sealed shut for weeks in storage, it goes musty and mouldy — and the freezer compartment inside is even worse, because it stays shut and stale even when the main door is vented. This is the two-in-one version of my…
Housing with place for a Powersupply PCB.
A stand for the DSO138 oscilloscope with the (standard?) acrylic case. Heavy enough that it does not slide around the worktop as you connect it up ;-). I also incorporated some storage for probes etc. All the ports and connections are…
Wall mounts for Lego sets: 42138: Ford Mustang Shelby GT500, 42137: Formula E Porsche 99x Electric 42204: Fast & Furious Toyota Supra MK4. Allows the model to be mounted on any flat surface in practically any position, including the…
When I moved to my new appartment, the first thing that broke was a plastic part of one of my IKEA BERNHARD barstools. As Ikea was not able to provide a replacement part, I went with my 3D printer and created the part myself. Now the…
Crossman 1389 Loader Model I made for a replacement loader using Microsoft 3D Builder.
A case for a DSO-138 Pro portable oscilloscope with 2.4" display. Layer height 0.15mm Infill 15% Perimeters: 5 No Supports Use brim around nut and standoff pieces.
Introduction This oscilloscope is sold either assembled or as a kit. Whatever the case, you might want to enclose it in a box. Original acrylic boxes were sold but I gave them a pass when they were available, and now I just printed my own…
ORGANIZZATORE GT138 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
A probe replacement for the DSO138Mini Oscilloscope which would let you plug in a 3.5mm patch cable. Use with two 3.5mm jacks coupled together as a passive mult (see photos for more info). You can find all of my files on Github:…
DSO138 mini (J) oscilloscope board replica.
re-render of modern interpretation of vintage 1890s patented by C.C.Packard leaf shutter, remixed from published on flickr blow-up diagram. Used image to 3d model on Makerworld with export to .stl Powered by MakerWorld-Image-to-3D (…
A replacement cover set for the ABUS tresor 1385 combination bicycle lock. To assemble glue both sides together with a glue that has a little bit of volume (I don't reccomend superglue), so that the tolerances are filled. If you still…
The repair contest pushed me to do and publish this model. There's a plastic part (probably ABS) of the gripper mechanism which recently snapped in the thinnest point after several years of use (mostly to grab fallen half-rotten apples in…
ARTE&DISIGN GT138 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Gridfinity bin for NWS snips. Tool outline was generated using https://tracing.tools/
Motivation I wanted to have a small case with oscilloscope, power supply and probes. As an extra feature, the tilt up supports enable you to put the device in an upright position for measurement within the opened case. Printing I printed…
The slider switches that came with my DSO-138 Scope were basically buried into the front piece of plexiglass. This design has them come out a bit further and also seems to fit a lot better as well. No obligation at all, but if you like…
Box mit den Maßen 138x37x52. Fusion 360 Datei zum bearbeiten angehängt.
Easily printable covers for impact resistance and prevention of accidental shorts. The clicky buttons aren't covered, as they're in a very robust section of the board. The toggle switch holes are optimized for printability. The display…
This one is for J-version with TTL -external triggering (FW -110 or newer) and PC connectors. The kit's mother/display board connectors are recycled for those extra connectors so unit is like 1/2 cm slimmer than standard one (see the…
Gedruckt mit Prusa Signal White PETG auf Sovol SV08 (Einstellung Sovol PETG) Printed with Prusa Signal White PETG with my Sovol SV08 (Filement Setting Sovol PETG)
Work in Progress (WIP) This is my version of the original Wurst enlarger by @sovograf ( https://www.thingiverse.com/sovograf ) , redesigned for 3D printing. Many thanks for making the original project available and inspiring this…
INSTRUCTIONS!!! For the assembly you will need eight M2.5 8mm countersunk screws (or just try different lenght if it will be enough), four M2.5 11mm long (standoff) nut and TP4056 usb C charging board. First step is to print all the…
Had a go with Tinkercad trying to make my first thing and this is what i came up with, needed some scaling in Cura but managed to make it work :) if it is not quite right in any way then the files are saved at tinkercad's web site. I plan…
EN: To identify a fluid ring condenser or fluid ring vacuum pump or operating controls for switching this equipment on or off. DE: Kennzeichnung für eine Rotationskompressor, Flüssigkeitsring-Typ; Vakuumpumpe, Flüssigkeitsring-Typ. Zur…
100x160mm signs, with quotes from the first George Lucas movie. “Criminal Drug Evasion” and “do you feel properly sedated?” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode.…
ANENG BT138 Battery Tester Box Protection for my new battery tester. Since I wanted a battery tester without its own power supply (battery), I purchased the ANENG BT138. The battery tester display would probably get scratched quickly in…
A Gridfinity Bin to Stote your DSO138 Osciloscope standing
I changed the original spark plug (can't buy it) to a BOSCH WSR 6F. But it turned out to be slightly higher and when the saw was working, it began to push out the lid. I modeled the spacer and printed it from TPU 80A. Largest model needs…
Simple part to replace an A-13898 flipper backing plate on some Gottlieb pinball machines. On a pin I was servicing there had been a clear plastic backing plate for the flipper button which had split, allowing the flipper button to push…
YDA-138 based amplifier chassis Suitable for entry-level radio hobbyists.
Last version worked great, but the pla threads didn't hold very well and i ended up needing it a little taller than 70mm so i made a few adjustments, changed the texture using https://bumpmesh.com again and re-printed it using pc this…
My son broke the pin for the 1380D1 cap. As I was missing most of the original, I have designed one that works. Currently, it is printed from PETG, waiting to see how long it will hold. I'm planning to print in ABS or PC in the future, so…
Der Schalter ist eigentlich für Platinen gedacht, ich hatte aber noch einen hier liegen. Dieser muss zwischen die Kabel gelötet und dann in die passende Aussparung gepresst werden. Die STL beinhaltet das ganze Gehäse und muss im Slicer…
⚠ Please Read the Instructions First These carriers work like the original Beseler carriers, but they are plastic, not metal, and plastic has to be handled differently. The included PDF walks through printing and assembly step by step.…
Tested and printed without issues using Cura slicer. Hello everyone, I've prepared for you this model of the Czechoslovak heavy-duty truck Tatra T-138/T-148 S1 in 1/18 scale with working steering, suspension, dump bed, doors and bonnet.…
INSTRUCTIONS!!! For the assembly you will need eight M2.5 6mm countersunk screws (or just try different lenght if it will be enough), four M2.5 11mm long (standoff) nut and TP4056 usb C charging board. First step is to print all the…
EN: To identify a fluid ring condenser or fluid ring vacuum pump or operating controls for switching this equipment on or off. DE: Kennzeichnung für eine Rotationskompressor, Flüssigkeitsring-Typ; Vakuumpumpe, Flüssigkeitsring-Typ. Zur…
ANENG BT138 Battery Tester Box Protection for my new battery tester. Since I wanted a battery tester without its own power supply (battery), I purchased the ANENG BT138. The battery tester display would probably get scratched quickly in…
YDA-138 based amplifier chassis Suitable for entry-level radio hobbyists.
A spiral vase with a small lip to keep it strong while beung printed in Vase Mode
Movement holder for Seiko 6138/6139. You may need to adjust your scale settings on your slicer depending on your filament settings and how much shrinkage/expansion you get. Printing this with PLA worked just fine for me though! Center…
Wall mounts for Lego sets: 42138: Ford Mustang Shelby GT500, 42137: Formula E Porsche 99x Electric 42204: Fast & Furious Toyota Supra MK4. Allows the model to be mounted on any flat surface in practically any position, including the…
This model is compatible with the lego system.
![#0138 [REMIX] Quarter-Turn PSU Lock "T" Nut - Original Prusa Enclosure (OPE)](https://media.printables.com/media/prints/809969/images/6459149_e23b932e-feb0-48c8-8f76-864cf5dd6be9_af64aa24-0ea5-44e4-ae10-830a5c39207d/rl-20240409-005.jpg)
