Counting matching models…
This is a drill bit holder to mount on french cleat or sit on the work bench. You can add drill bits from 1mm to 13mm in steps of .5mm. On the back there are already 10mm deep holes for attachment to a French Cleat holder. (there´s a…
Various connectors and an end piece for the 1/2" - 13mm Micro-Drip water pipes from Gardena. Depending on your water pressure you might need a hose clamp to secure it properly. If you want to connect your micro drip system to a garden…
Note !! this is a remix however I cannot find the source any longer. The model is possible to screw to almost anything , it has a groove in the top to storrage a special size drill if needed and have 2 slots in the top for center drill…
A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…
BSPP G1/4 barbed hose fitting for hoses between 5 and 7mm of Internal diameter. It has a small recess to fit an O-ring with 17mm of external diameter and a maximum of 2 mm thick. The barbs larger and smaller diameters are, respectively…
Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.
Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…
printed from PET-G, one body and 2 nuts. For body use brim, supports not required. if you need connector to 3/4" hose then set scale factor to 130% in X and Y coordinates for 1" hose connector set scale factor 200% in X and Y coordinates…
Compact detail sander with a 13 mm sanding width , designed for precise sanding in tight or hard-to-reach areas. Ideal for fine detail work, small parts, and controlled material removal. Cut Sandpaper Strip 13 mm × 183 mm (1/2″ × 7-1/4″)…
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
Filter intake to protect baby shrimp or fish fry from sucked in. Suits any piping that are 12mm or 16mm, 1 mm holes (Round and hexagonal). Models Filter 13mm (Height 55mm) - (Round and hexagonal) Filter 13mm (Height 79mm) - (Round and…
Used it for my own Airsoft M4. Works great and it is durable!
Filter intake to protect baby shrimp or fish fry from sucked in. Suits any piping that are 13mm, 1 mm holes (Round and hexagonal), 55mm height.
Chunky knobs made for a snug fit with M8 hexagonal bolts or nuts. Modelled to work best with normal DIN standard fasteners (13mm across flats and head height 5-6mm to 6.4mm.) Initially made for using with the partially-threaded bolts…
Size 1 to 13mm Fit for Measuring Physical specification: 97 x 190 x 3mm 9.7 x 19 x 0.3cm PLA or PLA+ or PETG
Please like model, if you are satisfied.
This is a 25%, or quarter scale model of a set of MG131 machine guns, with mount and feed chutes. I designed this for a friend, who was building a scale RC FW190. Most of the parts will print fine without supports, but the mount will…
Hi! I designed this in my free time and would really appreciate it if you could leave a comment or share a make after printing it. It means a lot to me and gives me motivation to make more items :) Thanks! This modular LED strip bar is…
lost two feet of my chair in a trip, was already sinking into wet ground a bit before, found the original file and made the inner diameter smaller then removed the holes 2024/10/8 update: revisiting the file because I need to print a set…
Coude 90° pour tuyau Gardena noir (enterré) 13mm Permet de raccorder un tuyau de 13mm à angle droit.
I tried to find the perfect drill holder for my needs and couldn't really find something that suits all my needs. Therefore I created one myself. This design fits drill bits from 9mm to 13mm in size. For sizes 1mm to 8,5mm see my other…
Adapter for conversion Xiaomi accessories connector to standard - 26mm diameter (13mm radius) hole. works for Xiaomi Mi Vacuum Cleaner G10 I needed it for baby aspirator. PLA, PET, PETG works just fine. Simple, easy, ready to print.
You can mount the Gardena MicroDrip 13mm system wherever you want. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Supports: No Resolution: 0,3 Infill: 70 or more Filament: Fillamentum CPE, ASA signal Category: Outdoor &…
My intent was to design a simple robust bow sander that was easy to load. 166mm (6.53") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…
Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.
P Clips for securely mounting wires and cables using M4 fasteners. Available in sizes 2 to 13mm outside cable diameters. Ideally printed with a flexible filament. I print mine in TPU with a high wall count. PETG may also be suitable. Band…
My intent was to design a simple robust bow sander that was easy to load. 89mm (3.5") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…
I used these brackets to replace the M16 pipe clamps I used to attach the 13mm tubing to the greenhouse foundation. The hole in the bottom is 4.5mm. I have printed it with PETG and 4 outer walls.
½ inch to 13mm barbed pipe adapter. I use this to connect my solenoid valves to the 13mm irrigation pipe which I use for the garden
Mini case for the Heltec V3, which fits a larger antenna which none of the other mini type designs seem to. Be aware if your print tolerances aren't the same as mine you might need to sand the side where the bottom of the screen fits in.…
I have lengthened the existing version to 120mm. Ideal for installing mixer taps. Printed with PETG.
The original didn't fit my 3 cup model so I just resized the original up about by 1/8th so that it would fit the 13mm stem of my moka pot no other changes have been made. Original by Jayuk. Print Settings Printer Brand: Creality Printer:…
M8 (13mm) nut adapter. I use for mower (handle folding). I printed model from PETG. czech: Adaptér matky M8 (13mm). Používám na sekačce (sklápění rukojeti). Tiskl jsem model z PETG.
Schützt ihren Boden vor Schrammen. Gedruckt aus PLA, PETG oder TPU je nach Anwendung.
Soil stake for 1/2 inch (13mm) Gardena micro drip hose. Quick and dirty Tinkercad design. Constructive comments appreciated. Prusa i3 MK3s 56 min for 1 with standard slicer settings Prusa mini fits 6 (4h18 with draft settings) Print…
The mounts were printed with a layer height of 0.3. in PETG. No supports are required.
A basic 13mm small thread T-Bolt for the Multiboard system.
An adapter from Gardena connector to a 1/2" - 13mm hose. You can use the ring seal of an original adapter but you can also print one with TPU (file included). Variant Gardena connector ½" - 13mm hose connector 1 1x 1x 2 1x 2x 3 1x 3x 4 2x…
This is a two piece 13mm to 18mm motor adapter. It works with Estes 13mm motors, and you can use it in lightweight rockets that use 18mm motors. Print in ABS for better heat resistance and lighter weight. Use a brim when printing. Use a…
Remix of the original model to combine with the male part of a quick release coupling lock. Watch out, the fingers are fragile and can snap off easily. Print with them facing down, with a brim. Best to use PETG for outdoor use. The nut is…
Printed from PETG. Printing position as in picture with two connectors down wards. The connector “fingers” are a bit fragile and can easily snap, but if handled with care it's a very tight fit and doesn't leak. I actually had to use some…
If you don’t want to spend a fortune on 13mm poly pipe clamps from the store, then this is a real cost saver. It prints a useable hose clamp with a 0.4mm nozzle, but I expect it would print a much stronger (teeth-wise) item with a 0.2mm…
Print using the same material and settings as the default Voron parts. Uses the same screws. I included the .stp in case someone needs it changed.
I got inspired to organize my electronic parts in test tubes, but wanted a better cover for them, that would eventually allow for labeling/customization. The caps provided are for a 13mm tube, 16mm tube, and the 16mm with test mmu label.…
The Juwel Bioflow One aquarium filter and heater combination, utilizes an O2 diffusor which narrows the 16.5mm outlet to a 10mm “jet” to inject air into the water. One downside can be that this jet creates a strong current in the fish…
Plug for Gardena underground pipes (or black irrigation hose) of 13mm Test for strength depending on the type of filament used and the orientation when printing the part.A horizontal print will be stronger but less accurate for example.…
just print and cut simple as that! Dart Tips: please print in TPU anything else and you risk serious injury or damage to anyone or anything the tips hit. (meant to only print and glue onto the cut ends for practice or simple shooting to…
My spanner collection inside my portable toolbox was always a mess. Each spanner dispersed in the toolbox box and hard to find. My solution to the spanner mess is to bring them together into this 3D printed spanner carrier. This 3D…
I printed it on my X1C at 0.12mm high quality.
A Drill bit tray for 1-13mm bits. (25) Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PLA PLA Category: Tool Holders & Boxes
Added raised labels to Flash72 's Gridfinity Drill Bit Set Holder. There was no room on the 4mm, 8mm or 8.5mm slots so you'll have to use context clues sorry guys. Original:…
Gridfinity Dimensions: 1x2x3U 2x2x3U Remix The model was made with OnShape and should be available to all https://cad.onshape.com/documents/d2b1533fdd4339235a0aeaef/w/dfd6302d8036a7602175fc06/e/bd297a3feee5e0f1c54b42ff
I have printed these from petg and pctg, and both seem to work fine. Additionally, you also need a roughly 16mm x 2,5mm (5/8" x 0,1") O-ring. PS. If you are using a hose clamp to secure the connection, be careful not to overtighten the…
1/2" (13mm) PVC parts to build enclosures or shelves Parts: pvc clip: clip to hold fabric or plastic on the tube pvc-corner: to build a door or a frame pvc-3-corner: brackets to hold the corners pvc-table: clamp for 4mm board, can be used…
Introducing our Winged Socket Wrench for M8 Nuts (13mm size), a must-have tool for any handyman or mechanic. This 3D model combines convenience and versatility, making it an indispensable addition to your toolbox. Features: Effortless…
I just need some pastry socket to make some cakes during the shutdown. So I made a serie. I have not used all yet. Material Quantity 8g Dimensions 35 x 35 x 40
Works fine with both acrylic and PETG tubing, easy to use, perfect 90 bends. 2cm bend radius.Enjoy
This one has not been tested yet but is using the same design as the 14mm which has been tested. I made this 13.4mm inside. Tolerances are 0.2mm so print this first- https://www.thingiverse.com/thing:3569489 More sizes to come. I…
13mm Endstück für 1/2 Zoll Leitung (z.B. Gardena Micro-Drip 13mm)
p clip for 13mm od 13mm flexible conduit takes a m5 bolt
Spacer for rolling pin to allow you to create .5" or 13mm thick dough
cover for 13mm nut ( originaly on top of oarlock)
Currently, the files are V2, the description will be updated ASAP This mount lets you lower your screen and provides more clearance on the top side (level with top glass or handle). It offsets the mounting point 14mm outward, then 21mm or…
Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…
Simple to print without supports. PetG preferred.
Use 10mm toppers on 13mm foot switches, like on the TC electronic Plethora guitar pedals.
Greenhouse Outdoor Pole Clip Ø 10/12/13mm - Molletta fermateli serra da esterni Greenhouse Film Clear Polythene Plastic Sheeting Garden DIY Material Cover Greenhouse Roof Resize to adjust dimension If you download/enjoyed this file,…
Please like model, if you are satisfied. As main holder use long version of model. Short version is getting from land easily, but is usable as balancer. Socket compatibility checked with: Gardena Adjustable Endline Drip Head (1391-20)…
I printed some of the original clips and noticed, that my label printer stickers won't fit them. So I enlarged the original 10mm ones to 13mm for a perfect fit.
A basic J shaped hook meant to be placed or slipped over top of a rail, cabinet door, or shelf wall. Great to hang items such as hats, keys, coats, etc. Five different models with gap widths to fit over wall thickness from 12mm to 16mm.…
These hinges are made for acrylic door. I designed parts for IKEA Lack enclosure and it needed hinges, where doors are 13mm depth from feet surface. Measurements: Height: 50mm Width: 60mm Holes: 4,5mm Countersink: 8mm Female part depth…
All the cable clips I had downloaded were too small. I'm using some woven flexwrap around my cables, so they're a bit fat. This clips into the extrusion channel. Not super tight, but not loose either. 13mm inner diameter, 16mm outer…
Story: I needed to connect the hose of my mini pump to a regular 13mm hose to be able to attach a Gardena quick connector . After the first version, I have added some chamfers so you can print without any support. If you have any trouble…
The mini keychain wrench for 10mm and 13mm nuts or bolts
I play a little with the thinkercat and designed a body for an Axial SCX10
Connector for 15mm Gardena MDS Pipes. 2 O-Rings are needed. (9 mm x 1.7mm)
Allows you to connect the Gardena microdrip 13mm system to an electric water valve. Thanks, Enjoy! Print Settings Printer Brand: Prusa Printer: MK3S Rafts: No Supports: Yes Resolution: 0,2 Infill: variable Filament: Fillamentum CPE, ASA…
I really liked the original design by NickiDotDK, but it did not fit the requirements for the make of wall panel I was due to fit on my wall. With a sample of the Trepanel brand of wall panel I determined that the width needed was 13mm…
This is a sturdy Multiboard mounting bracket for a Ryobi single battery charger (model BCL14181H). The battery charger has mounting holes 105mm apart and the posts on this model, although small, are just about strong enough to hold it if…
This is a remix of @VAROEsolutions model to use 13mm dowel Instead.
ein kleines Spassprojekt. Mit diesem Bohrer ist es möglich den Kopf der Bohrmaschine beim Bohren auszugleichen Viel Spass beim ausprobieren.
So couple of years ago I got fed up with various ethernet cables around the house and decided to do something about. I already had few bits and pieces of cable trays I had purchased from hardware store, but since the only option for…
This is an inlay for Bosh Professional 1mm to 13mm Drill Bit PointTeQ Set. It accepts Quick Setup Drill Depth Guide by Highrise Workshop.
Print in ASA for outdoor use. you might get away with PETG or even PLA, but PLA will bend in the summer if in direct sunlight.
13mm wrench for polymer bolts! Printed in Glass filled Nylon with a large brim for success
This Gridfinity holder is designed for the seven 1/4" sockets from Wera Tool-Check with 5.5, 6, 7, 8, 10, 12, and 13mm sockets. It takes 1x3 space on the grid. I have another design for Bicycle Tool-Check with spaces for 5.5, 6, 7, 8, 12,…
No Support Easy Print Aquarium Planter - 4-13mm
The clip can be slotted into 2020 extrusion from the side, and then rotated to lock them in place. They can be quite stiff to get in, I used an adjustable wrench. I've included a 3mm hex wrench socket that may also work to turn them into…
Gardena 13mm MDS to QuickConnect Adapter. useful as replacement for the pressure Limiter when used with low pressure water supply e.g. garden pump. 2 O rings are needed 9 mm x 1.7mm and 10.6mm x 2.7mm (As for MDS 13mm and QuickConnect)
This has a built-in support that should easily snap off after printing.
So… I decided to roll with the Gardena Micro-Drip System, but because I like to make life harder and more fun, I’m hanging it in mid-air like some kind of hydroponic wizard. That’s why this holder is long enough to double as a lightsaber…
Halterung zu Bohrer Sortiment - Ø1.0 - 13mm - 0.5mm Steps Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Hoch und Flach Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2.…
Remix of ( https://www.thingiverse.com/thing:4784422 ) for 3mm high x 13mm wide LED strip. I printed with a modified PrettyPLA profile. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 10…
Wir haben für den Außenbereich (Terrasse) einen wetterfesten LED Streifen gekauft. Dieser ist in einer Art Schlauchform um Feuchtigkeit abzuweisen. Hierfür habe ich einen passenden Clip mit M3 Bohrung konstruiert. Gedruckt in PLA (PETG…
13mm socket insert to attach your favorite Wera KK screwdriver insert to your favorite torque driver. Included also a longer version for the long socket. Print instructions Obviously this is not VDE 1000V anymore. Print 0.2mm 100% infill,…
My kit y-axis idler started making clicking noises, so I wanted to replace it with a (hopefully) higher-quality alternative. I could only find 9mm, 20T GT2 idlers with a larger OD (18mm, instead of 16mm) and 13mm length (instead of 12mm)…
These are foot ends for packable camp chairs. These feet will work on any chair in this style as long as the poles are 13mm in diameter. The rear legs are for 45 degree poles and the front legs are for 50 degree poles but these should be…
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
