194 models
This is a very easy 155mm clamp to hold down your workpiece on your CNC spoilboard. I use this with the T-track system from Incra, but compatible with many different clamping solutions.
This is a remix of the case by morleykert. I resized it to fit my tool that was 12 mm longer than the original
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
I love the Kalita Wave 155 dripper for pour-over coffee, but I want to use commonly available basket filters, like these for instance. This little tool will re-shape a larger filter to fit correctly inside the dripper. Print directions |…
Mopar 55155994AB, Jeep WJ 1999-2004 "Quadra-Drive" Emblem for trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. Printed in PETG, manual…
Hello, Today I have for you a Handle 175 mm long, with a hole spacing of 155 mm Suitable for drawers or cabinets. Suitable for M8 screws and smaller. Possibility of using a screw. I used ASA/PETG as the material. No need to use…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
For model makers (dioramas) see the exciting addition of accessories below This is the standard 155mm howitzer shell in use by the US army since around WWI. This model was inspired by @sbeecroft's models on Thingiverse; this is not a…
Update: May 5th 2024 The model has been revised to improve the hinge. This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). Print instructions Rafts: No Supports: No Layer Height: 0.2mm…
This model is compatible with the lego system.
The Printables version will not be updated. The best place to get it is here: https://captainbobsim.com/product/the-cessna-172-project-files/?customize_changeset_uuid= Find the MobiFlight code under Section 2/Avionics Bill 'o Materials: 📦…
This is a simple print-in-place protective case for Intel 2nd-11th Gen CPUs (LGA 1200, 1151, 1150, 1155). I've remixed the original model so that you can see the CPU model, with a small window at the top.
I needed a very strong basket to hold various things like LIPO Battery and oil, spray bottle, etc.
This model is compatible with the lego system.
I print this with PET-G at a 0.3mm layer height, works great.
This model is compatible with the lego system.
Hello All, This is an insert for my rugged box deburring tool case here: https://www.printables.com/model/551996-deburring-tool-case-150mm-afa-tooling-rugged-box-s I noticed there were a few folks who were cutting or modifying the insert…
Remix of Volkswagen Golf GTI - Low Poly Miniature which was designed by von Agustin "Flowalistik" Arroyo Changed it to a Low Poly Convertible Golf MK1. Seperated the wheels that you can print them seperately, maybe with color change, or…
This model is compatible with the lego system.
After adding more t-handle sizes to my model here: https://www.printables.com/model/70527-ufs-094-more-t-handle-hex-allen-key-wrench I suddenly had a bunch of wrench sitting all over my bench taking up space. So I designed a holder for…
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
Come support these models over on Patreon Buy my time, Not my models. Easy to print M1918 155mm howitzer, 1/100 scale, will want some greebling if scaled up. Some details have been changed for looks/ printability. For a towed version, cut…
This model is compatible with the lego system.
This model is compatible with the lego system.
I scaled it a bit up so the CPUs fit with no force and created the 2 by 2, 3 and 5 variations. Tape can be added to form an easy pull tab on the cover. I have printed 3 * 2x4 (with 10% infill) at a time on my Replicator+ and it worked…
Needed parts: M8 bolt M8 nut 1 cent (euro cent) coin. Printing advises: 100% infill on both parts, at least on part 2. 200 microns is enough, but it is better to print in 100-150. working even with PLA you can use lubricant on the rail…
This model is compatible with the lego system.
Huina 550 / 1550 Undercarriage Spring tensioner Bearing rollers More ground clearance under the center section (about 30mm instead of 8mm stock) Fits stock Huina track gearboxes (a little plastic snipping required only) Fits stock Huina…
This model is compatible with the lego system.
A minimalist bedroom door hanger designed to combine clarity, elegance, and a modern look. With a clearly recognizable bedroom symbol, it discreetly communicates privacy while adding a tasteful decorative touch. Perfect for homes,…
This model is compatible with the lego system.
XSR 155 - Yamaha XSR155R motorcycle keychain
Originally published here: (WIP) Motorola Moto E20 xt2155 case by tato_713 - Thingiverse This was designed for the Motorola E20, but it may be compatible with the E40 as well. Some of the models are designed for rigid materials and others…
There are quite a few "gas mask thread" things out there, but none that particularly inspired confidence in its compliance with specifications or how well they would interface with other components. mfxpyro's thing has the right…
I use the inspiration from another posting of making a US flag by just using color layer changes for the print, using a 0,2 mm layer height to print start with black for a base, at layer 3 change to red at layer 5 change to blue and at…
This model is compatible with the lego system.
This model is compatible with the lego system.
Needs supports. Can be removed easily. Printed with 10% infill, but modified the tip to have 100 infill → bolt flies better The file “Bolt with settings.3mf” has the necessary settings for the infill. 155,4mm X 5,8mm
Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…
This model is compatible with the lego system.
This is the pinnacle of my tire designs for the robotmover. This tire wont get stuck, rip up your edges or clog up with dirt. Tire is 20mm wide, but use the slicer to extend to 40mm. Printed on CR10s PRO with microswiss directdrive. Rim…
This is an alternative vacuum adapter for the Einhell router/Oberfräse TC-RO 1155 E since for my case the original vacuum guide was too often unhandy. You can screw it in the exsting holes and everything will snap in place properly…
This model is compatible with the lego system.
Prevent the automower from digging ruts in your lawn. Printable on a 220mm square bed. This is a remix of a excelent design by polandmet so that it would print on my 220X220mm bed. https://youtu.be/YmMLucwmtG8 Each wheel prints in 4 parts…
This model is compatible with the lego system.
This model is compatible with the lego system.
Beide Teile ersetzen die Originalteile 1:1. Sie können also auch einzeln verwendet werden. Der Fanduct kann zusätzlich von 2 Magneten an der Grundplatte gehalten werden. Die hierzu notwendigen Aufnahmen sind vorhanden. Das…
Huina 1550 Progressive Link Thumb Your choice of : Short : Use without a quick coupler or for a shorter thumb Long : Use with the quick coupler Not compatible with stock square drive Not compatible with stock remote Not compatible with…
Cabin Bars / Grill / Protector for Huina 1550 Either print in 8 parts (print_7 and print_1) or the complete thing. Glue together the 8 parts then double-side sticky tape the grill to the cabin. V2 fixes a tolerance issue around the bottom…
Bucket push rods for your Huina 1550 This allows more angle of the bucket if used in addition to my other mod here : https://www.thingiverse.com/thing:3723652 Print one of each part except (2x) horizontal_v1 The cylinder_spacer is made to…
This was designed for the cheap Einhell TC-RO 1155 E router. It might fit other, very similar cheap models as well or can easily be adopted for them. Fusion 360 files are available for download. Please refer to the detailed build…
I needed to ship a handful of Intel CPUs and I didn't have any proper way to mail them. I wasn't a fan of any of the trays I could find on here and they didn't seem to be heavy duty enough to my liking for mailing. This is a bit thicker…
Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod. There is no square hole in this to drive it from the stock bucket motor ! Requires (1x) M4x45 bolt and nut to make the front attachment pins. The…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** This is a collar installed onto the glass cylinder and…
Wichtiges Update 2024-10-07: Offene Variante ersetzt, da sich die Längsträger mit Radaufhängungen sich beim Export der angepassten STLs aus FreeCAD nach weiter innen verschoben haben. Geschichte Erbaut 1898 von Herbrand für die…
lego 2877 71752 98283 15533 30136 30137 20310 2412
This model is compatible with the lego system.
After the wheels fell off by L2000 Worx Landroid I redesigned the wheels to ones which I believe are better. Watch video for assembly instructions.
This model is compatible with the lego system.
Print laying down with supports for more strength Screw into wall with 4mm screws
A TPU protector for the lipo. Print instructions After I designed a lipo protector für my mini beetle, I made one for my main kwad, too. This one holds a 1550mah 4s Lipo from Tattu, and fits under my transtec laser hd drone with air unit.
Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…
This is kickstand mount for Nami Burn-E if you change suspension from 165 mm -> 150/155 mm. You need: 1) Woom 1+-3 kickstand for kids bike for 150mm, Woom 2-3 kickstand for 155mm 2) M5 inner threads 3) M5 screws
Some Lenovo motherboards have CPU cooler mounting holes that are larger than the standard specifications (5mm instead of 4mm) making it impossible to attach pushpin style CPU coolers such as stock intel coolers. This print essentially…
Here is my first concept of a "quick coupler" for my new Huina 1550 :D This is for a stock Huina without mods ! For the moment, it is a manual coupler, meaning you have to remove 1 bolt to detach the bucket. You can make yourself a 3mm…
This holder allows you to reuse an old 478 Intel socket cooler for more recent sockets like 1150, 1151, 1155, 1366 and others with 75x75mm hole mounting. In my case, I had to trim some of the fins to clear the capacitors on the board with…
Info for 3D model: You can use this model for plate on MSI MAG Coreliquid 240R v2. Tested with PLA material on Asrock Z77 Extreme 4 and Fatality Z77 Performance (Socket 1155). Needs backplate and bolts/screws M3. BOM list: Bolts M3x30 mm…
Printable 3D model. Cyndaquil candle. STL file.
Initially, I drew a durable and convenient glasses case, but it can be used as a container for small items. Internal case dimensions: diameter 33 mm and length 155 mm. First change I added another version of the body half, making it a…
Make sure you check size of LID stl x and y at 105.19, 105.20 as I some how see fusion360 drop the size when export.
Lego round flat tile 2x2 with hole 15535 or 6055313.
I was looking for a way to rise my printer, I have a lack enclosure that sits on top of another lack table but the printer was to low for me to work on it so I made these extenders. I personally use the 155mm extender on top of some…
This is my capture of the fan favorite "Egyptian Michael Jackson" statue from The Field Museum in Chicago. Always one of my favorites, now I can print one out for my desk! More details on the sculpture can be found in this Time Out…
3D Topographic Map of Denali (Mount McKinley) Alaska. A rendering of the "Great One", the highest peak in North America. 20,310 feet / 6,155 meters high. When measured from its base to summit; Denali is taller than Mount Everest.
Dies ist ein Case für ein Multimeter VC155 des Herstellers Voltcraft. Es bietet Platz für das Multimeter selbst, den Temperaturfühler (unter dem Multimeter) sowie diverse Kabel, Ersatzbatterien, etc. Als zus. Hardware werden benötigt: 2 x…
Design Objectives I liked the idea of the basket weave desiccant containers, so this container is an iteration on that design. Large capacity for big dry boxes. The container is 83mm (diameter) by 156mm (height) and can hold 500 grams of…
Limbered version of Windham Graves ' excellent M1918 155mm Howitzer (known as the 155C mle 1917 in French service) in both horse-draw and motorised versions. The gun barrel was separated from the cradle and moved to its travel position.…
Erbaut 1898 von Herbrand für die Nordhausen-Wernigeroder Eisenbahn (NWE) erhielt der Wagen die Nummer 155. Der Gepäckwagen ist heute in schlechtem Zustand, aber er existiert noch. Nach 1958 erhielt er die Nummer 905-152. Er war bis Ende…
Made an addition - crude fuse wrench. Shell fuse 2 and shell top fuse 2 have not been printed. Shell fuse 1 and shell top fuse 1 have been printed and fits tight if it's too tight the method i use is to dip it in boiling water for a…
Key for Yakima SKS lock with code A155 Based on Yakima control key design
A model of the 88-94 OBS C1500 GM_15599095 88-94 C1500 Junction Block Nuts. These have not yet been test printed. MJF Nylon would probably be the best method/material.
remixed the original to now accept 155mm OD spools
I needed another size and so i just used the frame from Flotschi and created my own size. Changed some small things. I also uploaded the step, if someone want to change it on his own in size. fitting Size: height: 215-225mm width: 150-160mm
This is an adapter to go from a MS-44 antenna mast to the official starlink pipe adapter. This is a snug fit that prevents needing to damage the MS-44 antenna mast sections with the provided set screws.
The stem enables to wind antenna coil for 1616mhz. The polarization is circular and stem It contains both - left and right hand path(L,R). You can chose desired polarization base on your needs. If you transmit an signal using satellite…
Designed to fit on the outside of a 63mm OD/52mm ID basket with tabs around 22.5mm wide on each side. Funnel opening is 75mm, overall height is 30mm.
Drill/Screw bits holder for Makita LXT DTD155/DHP483 and maybe other Makita tools. Includes holes for 6x2mm magnets. Holes should be tight enough but you can always add some glue to make sure they stay in place. OpenSCAD source code…
Adjusted in tinker cad using online size guides and a ratio calculator
a small hol on bottom for a screw. good for 24mm handle. 11 teeth, 155mm total
i wanted to use longer props for a steady and longer flight i will use mjx bugs8 eletronics in it and ready to sky motors mt2204 - 2300kv remix from left coast drone https://www.thingiverse.com/thing:1166987 Print Settings Printer: tronxy…
This is (mainly) a 155mm long version of the fischertechnik flex rail. When combining fischertechnik and Gravitrax (using this: https://www.thingiverse.com/thing:3169727 ), it turned out that the 180mm original rails were to long. The…
Simple 3x4 magnetic parts tray for small screws or whatever. 155mm x 102mm. Takes 12, 8mm x 2mm magnets.
Průchodka na zeď mobilní klimatizace ETA pro flexi potrubí 155 mm Grommet for wall ETA mobile air conditioner for flexible pipes 155 mm
Adapter to fit KN1550 air filter on Virago cafe racer. The only modification you need is to cut the rubber boot. You can use the original bolts. I used a 50 x 3,5mm O-ring between the mount and baseplate.
I printed this to replace the broken selecting gear in a thrifted Brother XL 3010. I'm still working on putting the machine back together, I'm not even sure it works really. But the gear does mesh with the selecting mechanism, and…
Messbecher für 155 ml Gabelöl für z.B. Yamaha XS 650. In der .3mf Datei sind zwei Druckpausen für einen Farbwechesel eingefügt. Der erste Farbwechsel bei einer Aussenhöhe von 81 mm, der zweite Farbwechsel bei 81,8 mm. Bis zu dieser…
got a bunch of scrap motherboards with CPUs in them. CPUs worked fine but needed a way to store/ship them, so i decided to mount them to the heatsinks to make them more convenient. fits most CPUs 37.6mm Category: Computer
![#0155 Graduated Cylinder Protective Collar [5 sizes]](https://media.printables.com/media/prints/876813/images/6725450_91b1aba0-3694-43dc-9495-dcaae1d449d4_fbb5fb1e-cefd-48b7-af6c-1184a0dfdb0c/rl-20240511-009.jpg)
