321 models
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Print approx. €5.05–€6.17 excl. taxPreliminary estimate for one variant
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Print approx. €5.01–€6.12 excl. taxPreliminary estimate for one variant
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
MAZE RUNNER inspired LED 16x16 matrix clock with 256 NeoPixel LEDs Features: 16x16 matrix clock that you cannot read directly without knowing where you have to look. Some people i showed it had a really hard time to see it and some gave…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
A simple, compact 16x AA battery box with a tightly fitted lid. The provided "AA Battery Box MMM.3mf" file is a project for single extruder Prusa that uses two manual filament changes to print letters on the lid in a different color.…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant
Kryt pro I2C displej 16x2: https://arduino-shop.cz/arduino/1570-iic-i2c-display-lcd-1602-16x2-znaku-lcd-modul-modry.html Print Settings Rafts: No Supports: No Resolution: 0,15mm Infill: 15% Filament: Prusa, DevilDesign PETG Post-Printing…
Print approx. €2.80–€3.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple case for a 16x2 LCD with a pocket for a D1-Mini in the back. It has a cutout for the controllers metal-can to prevent overheating. Assembly M2 machine-screws inserted from the front side should self-tap into the posts in…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for one variant
A simple, compact 16x AAA battery box with a tightly fitted lid. The provided "AAA Battery Box MMM.3mf" file is a project for single extruder Prusa that uses two manual filament changes to print letters on the lid in a different color.…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for one variant
The housing fits LCD 16x2 2x16 model BIG LCD-PC-1602B-BIW
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for one variant
Bare stand for protection of an alphanumeric display 16 characters, 2 lines. This display is of I2C type, but the stand shall works as well for standard parallel ones.
Print approx. €2.55–€3.11 excl. taxPreliminary estimate for one variant
LCD control software on Github: https://github.com/janfitz/Arduino-Wemos-WiFi-keypad-shield-Bitcoin-ticker
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Here you can find a design of a display housing. The housing was constructed for 1602 2x16 lcd displays which can be used for arduino and raspberry pi. Print instructions I printed it with pla-filament. Temperatur: 210 Infill 15% Layer…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant
Vallejo paint bottle organiser for 16 bottles. Inner diameter is 25mm, it is friction fitted. I just put the least used paints in the middle. Printed in PLA. Enjoy :)
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
Support for 16X17ml bottles. It is a little more robust than my older design for 30 bottles. LINK Adding the gcode files for reference, but I recommend to use the STL file and slice it yourself. I'm also attaching the LINK to the design…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
A decorative frame for a 16inch by 10inch poster. Sized such that a thin canvas slides in and is held snuggly. I made cuts and added locating pins within the slicer itself since this is far too large to print in most desktop printers. I…
Print approx. €8.92–€10.90 excl. taxPreliminary estimate for one variant
caja Arduino con hc sr04 y pantalla lcd 16X2, además cuenta con un interruptor y un puntero laser para saber donde estas midiendo
Print approx. €7.51–€9.18 excl. taxPreliminary estimate for one variant
Dieses Gehäuse für ein 16×2 LCD Display Modul wurde entwickelt, um das Display sicher aufzunehmen und sauber in Elektronik- und DIY-Projekte zu integrieren. Das Display wird sicher im Gehäuse befestigt und erhält eine saubere…
Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET
LCD: https://pihrt.com/elektronika/315-arduino-uno-deska-i2c-lcd-16x2 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 15% Filament: Prusa, DevilDesign... PETG Post-Printing Category: DIY
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET
Dieses Gehäuse für ein 16×2 LCD Display (LCD1602) wurde mit einer leicht angewinkelten Displayfläche entwickelt. Dadurch lässt sich die Anzeige besonders bei der Montage auf Tischgeräten, Steuerboxen oder anderen Projektgehäusen…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
This is still work in progress. I make this for my Prusa XL as a dock for my DryBoxes supporting the RFID reader from the Project SpoolSense.org This enclosure is part of the SpoolSense ecosystem – an open-source project for tracking…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for PETGSource material: PET
Housing for 16x2 LCDs with an I2C controller on the back. The front panel is universal and fits all versions of the back-part (45° or 90°). Select the correct hole diameter for your LCD screen (M2 or M3) and the display cutout (big or…
WordClock 16x16 - 2024 This is the 2024 variant to the WordClock 16x16 model adding new functions and features as well as a new font as V2 variant. =) This WordClock 2024 variant covers mostly every input I got from users in the last 2…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
I have released a new, better and more modular version of this packer. Details: This packer fits 16 of the 1-¼" RAW cones and allows you to fill all 16 at once. Printed on the Bambu Labs X1C in the default orientation with tree supports…
16x16 LED Matrix Frame No glue, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector for easy installation Optional socket-less version…
3/8x16-2 bolt used on a buddies t shirt press that uses them as wearable items. Feel free to use as you please! Best printed in a horizontal way for strength but you will need a thread die to clean it up( I use a 3d printed die roflmao).
16x16 LED Matric case Features: Fits standard 16x16 LED matrix Rear hidden power barrel jack Internal supports for panel Lots of space for dev board to drive the LED matrix Its designed to house a ESP32 or ESP8266 running something like…
WordClock 16x8 - 2024 BIG news on 18.07.2026: Software version V5.0.0 available! WordClock 16x8 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To…
The F-16XL was a design submitted by General Dynamics for the Enhanced Tactical Fighter competition, the same competition that yielded the F-15E Strike Eagle. This was an up sized F-16 with a delta wing and 17 pylons with a capacity of up…
Case for Arduino Uno + LCD16x2 with I2C Print instructions Unassociated tags: lcd 16x2 i2c Category: Electronics Summary Case for Arduino Uno + LCD16x2 with I2C Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
model made for spiral vase mode, can contain 16 AA or AAA batteries. Print instructions can be printed in any material with any nozzle, the model is made for 0.6mm nozzle so if it is printed with smaller nozzles, the tolerances might be a…
16x32 LED Matrix Frame No glue*, tape or screws needed Accessible USB port Wall- or desk-mounted Snap-fit sockets for ESP-WROOM-32, MAX4466 or MAX9814 microphone and DC Power Connector Optional socket-less version * I suggest gluing the…
I really liked the design by @ColtonDick_376020 of the 16x RAW cone packer found here: https://www.printables.com/model/511085-16x-raw-cone-packer-1-14 , but it didn't come with a riser to allow you to pack the cones without holding the…
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
BIG news on 11.07.2026: WordClock 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of them please read this list and have a look…
A 16x16 base plate with Star Wars cargo terrain to add detail when displaying mini-figures Category: Playsets
This panel-mount bezel is designed to fit any standard 16x2 serial or parallel LCD. Designed and used in a custom PC project I built. .Skp file is include for easy modification! Instructions Print in PLA or ABS with a layer height of 0.25…
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
For my current project, i like to have a frame around a 16x2 lcd display in another color then the main housing. So i created a mounting frame, which can be printed in a different color. The frame offers all you need to mount a 1602…
The tray holds a total of 16 AA batteries, 16 AAA batteries and 4 CR2032 batteries. Print instructions The tray should be printed upside down to get a fine top side. Glue the bottom plate into the holder with some glue.
Case for Seeed's Grove RGB 16x2 LCD Display. I used M2 x 14mm screws but #2 x 1/2" thread forming screws would probably be better. Update 2019-03-10: Added a new version that is designed to be mounted on a flat surface (3/4" MDF board in…
A holder for 16 screwdriver bits, including holes for magnets. Print instructions Use 3x1mm neodymium magnets - glue them in.
Printable Cable Drag Chain, with 16x12 internal dimension. 45 Degree rotational limit per link for radius limiting. Suits standard 2 and 3 screw cable chain mounts, with inverted variants to mount either direction. This chain is designed…
Adding 5x 140mm fans with two 16x20x1 filters, giving it a large surface, makes noise levels virtually undetectable when running at max 12v. I made 3 of them so far. If I was to change something it would be to replace the panels screws…
Three Y splitters that can be used to combine multiple bowden tubes into one, suitable for multi material printing with a single extruder and multiple feede
Very simple, wire these LEDS; https://www.aliexpress.com/item/4001296811800.html?spm=a2g0o.order_list.order_list_main.89.21ef1802Wp91AO Along with an ESP32 to a 5v PSU, glue the panels together and you're done :)
More Bolt Sizes! Feel free to send me a message if you have any special requests. Sample image is printed in clear PLA, 0.25mm layers, 40mm/s print speed on my Micromake D1 (Kossel Delta Clone). Updates New double nut, I messed up the…
There are several variants of e-chain. E-chain ends are compatible with all variants. Segments can turn to both sides (in photo down) Segments are turnable just to one side. Good for horizontal orientation of the chain. (second photo)…
remake of another model. Added features. Dimensions 170mm x 170mm x 5mm (L x W x H) excluding dovetail counter-sunk m3 holes parts clearance (0.8mm) Features parts clearance dove tail for connecting the four pieces small inlet for the PCB…
A case to hold your Raspberry Pi Pico together with a 1602/16x2 LCD display. Designed to be standing on a flat surface. The screen is tilted at a ~30 degree angle so it's easier to see from above. Has a hole in the back to lead the…
M16x30mm Nut and Bolt Category: Parts
All holes are 3mm. Inspiration: https://www.printables.com/pl/model/199471-1602-lcd-screen-holder
RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…
128X220 box Print instructions PLA flament nozzle 220 °C table 60 °C
16x2 1602 LCD Display holder, freely adjustable version
Second model published, but the first one i actually started to work on. Diffuser + box for a 16x16 pixel grid (available from BTF lighting). for the diffuser, first three layers are white PLA, then switched to black pla for the remainder…
I wanted to build a nightbed lamp for my kid, but all the previous neoboard-related designs seemed designed to be hang on a wall more than to be used by a 5 year old... so I built a new frame with a wider bottom side. Instructions for the…
I needed replacement brush holder cap for my Hitachi hammer, but should fit any tool using caps with M16x1 thread. Should be printer with heat resistant filament like ASA or at least PETG. I printed mine in ASA with 100% infill and used…
GT2 Pulley with 2 x 623ZZ bearings. Print instructions Unassociated tags: Rebel II Category: DIY Summary GT2 Pulley with 2 x 623ZZ bearings. Print Settings Rafts: No Supports: No Resolution: 0.1mm Infill: 80% Notes: nozzle: 0.4mm layer…
Collection of screws (ISO 4017 / DIN 933) including : M16x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Based on the rough working principle of the most popular self watering planters on this website. Walls are thick enough so no leaks occur (tested this myself, sadly I no longer have access to the final prints) Theoretically it's possible…
WordCalendar 16x16 - 2024 BIG news on 17.07.2026: Software version V2.0.0 available! WordCalendar 16X16 received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the…
Remixed this from AWSW great model https://www.printables.com/de/model/450556-wordclock-16x16-led-matrix-2023-v3 - here you can also get his neat Arduino Software to operate. I only remixed DE+EN Fronts so far, other languages would take…
No supports or brim, and print normally otherwise This is from my makeronline account, so please do not report, BURNTkoki, and this printable account is linked on makeronline
This is a remix of the German Version of the famous and great "Wordclock 16x16 2024" by AWSW (https://www.printables.com/model/768062-wordclock-16x16-2024). So if you need information about the hard- and software needed, please look…
Desk holder/stand for all WordClock 2024/2025 ( 16x8 and 16x16 ) models in case you want to lean your WordClock 2024/2025 a little bit back on your desk, sideboard or low board. =) With the shown big printed screw you can adjust the angle…
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
Conventional 16x2 character LCD displays with hd44870 controllers are huge. They get even bigger with a PCF8574-based I2C module attached to their back. Buydisplay.com sell the EastRising ERC1602-4 LCD series with a chip-on-glass (COG)…
This is operator panel i designed to my custom control system and already used it in few projects. You can use i2c expanders to make it ultra easy to hook up with only 4 wires. Keep in mind that you have to solder keypad expander exactly…
Remix of front panel that covers the LCD bezels.
Printing costs per rack ~1.60 Euro.
robot soccer 17x16x9 dos puntos de contacto
Collection of screws (ISO 4762 / DIN 912) including : M16x 16, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Print Upside down! The AMS version has 16 individual parts at the top, which can be colored individually (use 0.2mm Layer height)
Needed end caps for my LED Channels and so here we are. Can't find any other info on the channels other than the size of 16x7mm as indicated by the picture. Included is a cap with a hole for a cable and a cap without a hole.
A wavy tray that looks like a seashell, a Version with a Flat Base a Version with a curved Base Dimension: Ø16 cm h 7 cm Supports Needed
Ready to print 3D model of the famous Brembo 16X18 brake If you print it, please give a feedback Thanks
The first version published here is a rather minimal case with a surprisingly effective diffusor for one of those quadratic LED matrices you can get on Aliexpress with 256 WS2812b LED on it, 16 rows a 16 lights, spaced in a 10mm raster. A…
This pen holder is for the Posca Paint Marker, the holes are 16mm and it fits 16 pins. I opted for a closed foot because nothing wobbles and it stands stable, the pins are easier to recognize by the height difference and the angles a lot…
Just a flat hat M16x1.5 screw with a 45 degree chamfer for easy printing. fusion360 included - modify you own :-) cheers
This is a 16x16 baseplate circle inspired by lego. Great if you want to mount some lego on/in something round. I also made a 10x10 version: https://www.printables.com/model/865765-lego-inspired-baseplate-10x10-circle And a 11x11 version:…
Držák LED Alu rohového profilu 16x16mm pro hliníkové rámy 20x20mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
I needed a scope throw lever that was thinner than others out there in order to fit with how my scope was mounted onto the rail. This thing is about 6mm wide, just wide enough for the M3 nut to nest into the side. At 6mm thick, this isn't…
Collection of set screws (ISO 4028 / DIN 916) including : M16x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
Standard round 45 degree LED profile end cap used for corner wiring. Has to be glued, doesn't hold otherwise.
A rope winder for 2mm rope. Originally intended for 2mm arborist throw line.
Ends caps to fit in 16 x 16mm angled aluminium extrusions for LED-strips. The LED-bar can get warm, PLA is not recommended as a material to print with. Tight fitting - make sure your printer and extruder are accurate/calibrated.
A parametric LED Matrix diffusor front plate. fullcontrolXYZ based, 100%extrusion, 0 travel, 0 retractions. Extrudes at 0.8mm, which is totally fine for a 0.4nozzle. A bigger nozzle will probably allow much faster print speeds. Prints as…
Use heated inserts (on motor side) to mount this adapter to your motor with 16x16 moutingholes and mount it to your frame with 12x12mm mountingholes. I used M2 inserts and screws to mount everything to the frame and M3 screws for mounting…
Záslepka LED Alu rohového profilu 16x16mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
FPV drone adapter with 16x16mm to 20x20mm mounting holes
Collection of screws (ISO 10642 / DIN 7991) including : M16x 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.…
The moss should grow outside the grid after a while. I will update the pictures in a couple of weeks.
This is definitely my biggest design project I've tackled so far. After a lot of trial and error it's finally finished and I hope I'm not the only one who has been waiting for something like this. I had seen the funny pixel art displays…
5.25" half height Gotek holder with space for a 16x2 (1602) LCD display. Multiple versions available, including: Original v2 with supports added to the LCD screw supports to help printing One with space for blackberry trackball…
I use it as an anti-stress gadget. Screw have 60mm thread + 13mm head. Nut have 13mm height.
![Lego inspired baseplate 16x16 circle| Fits HÄRLIGA bell jar[big version] from IKEA](https://media.printables.com/media/prints/865782/images/6646898_ed5a028d-8f81-4c76-9830-e8afd2b6a911_ef37d36e-8498-4f3d-b5da-02c69cda5283/knipsel.png)
