228 models
Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night?? The ⚡ EV Charger Holder J1772 ⚡ is designed to hold an at home Level 2 EV charging plugs and cables…
This is a J1772 adapter dock for the Tesla Model 3. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
This is a J1772 adapter dock for the Tesla Model Y. The dock is inserted into the rear of the door cubby and holds the charging adapter in a forward-facing orientation. Since the dock sits in the back of the cubby, it only takes up a…
J1772 Charger Holder. Slim profile - doesn't stick out from the wall too far. Mounting holes are aligned so that you can mount it to a single stud. Loop the extra cord over the top. No supports needed as long as you print it on its side…
Similar to my other model, but the charger is inserted perpendicular to the wall. This provides easier access, but does make the charger stick out further from the wall. The whole reason I made the first one was to get something flat up…
Ensure the safety and security of your Tesla electric vehicle with this Tesla J1772 Adapter Lock. Designed with Tesla owners in mind, this innovative accessory provides peace of mind and convenience when charging your Tesla Model S, Model…
Diabolo Box oder Schüttelbox für Diabolos 4,5mm im Kaliber .177. Druck ohne Support, Nozzle 0,4mm, Laye 0,2mm, Infill 30% PLA + von Sunlu. Nach dem Druck mehrmals rein und raus schieben, dann geht es leichter.
A design by EGoe from Thingiverse for a J1772 Tesla Adaptor Lock, with some considerate modifications: Bi-directional There is a small press-fit that helps keep the ring attached to the adaptor while you carry it around. There are two…
This model is compatible with the lego system.
This silencer has been tested succesfully at 7.5 Joule of kinetic energy using 4.5 mm pellets. *please test with caution and always wear safety glasses when shooting *not suitable for pellets larger than 4.5 mm / 0.177 *test with caution…
This little gizmo helps you load BBs into your Umarex USA Glock 19 .177 (4.5 mm) Air Gun magazine(s). Assemble the loader by attaching the threaded funnel to the guide (the walls of the guide should be facing away from the funnel piece).…
This model is compatible with the lego system.
This model is compatible with the lego system.
The classic .177 caliber pellet design with a skirt and an option to print a version made with a hole so you can fit a 2mm ball bearing for extra weight and accuracy. I have tested these pellets tremendously on my air rifles and they work…
An airgun silencer, model supplied for .177 calibre, with K-type baffles that prints without support. Particularly useful for silencing CO2 and pneumatic airguns. Firearms will just blow it to bits and may present multiple hazards, so…
This EV Charger wall mount for J1772 plugs takes up a lot less space, protruding less than 3" (76 mm) from the wall! The 90° plug at a 45° downward angle is accessible and easy to plug in. Features: No holes in your wall! The wall mount…
This model is compatible with the lego system.
These are upgrade parts to turn your original magazine into a 20 round one. Source files (FreeCAD 1.0) are included. Parts needed: M3x12mm DIN912 socket head screw Spring from Diana Chaser magazine… …or wind your own spring: 10.5mm outer…
Update 11/19/2025 - Recent request for the outside slider cover, so I decided to go ahead and add it in. I also did a mild update to the inside slider cover. I think I can do a better job but if this means someone's headphones work vs…
Designed to fit my 2020 Tesla Model 3, may fit other years as well. I downloaded another model from here that was designed to fit a 2021 and it did not fit my 2020 so made my own Tesla Model 3 J1772 adapter holder for door cup holder.…
A simple wall mounted holder for the AC port of a CCS1 charger. Please check your vehicle charger for compatibility. Mounting This model was designed to be mounted directly on the wall, utilizing key-hole slots to be easily placed and…
Printed .2 Supports not needed but is cleaner.
A few years ago I painted my own magazine for the PP750 cal .177. The assembly needs some more fine tuning, I'm using a small lathe, drill bits and also need to wind the spring. I printed from PLA with a 0.25mm nozzle.
More to be updated, assembly should be the same as my first model Getting real tired bruh give me some time to make a guide
Lock ring for the Tesla J1772 adapter to keep people from unplugging your car while charging.
These pellet seaters are designed to help push tight pellets into the barrel or an airgun at a consistent depth. This will help seat pellets that are tight in the barrel and leave the skirt sticking out slightly. There are two sizes, .177…
This is a high accuracy .177 Caliber Pellet with a 3.5mm ball bearing on the front of it. The ball bearing helps give the pellet some weight and the fins help stabilize the pellet to prevent swirling during flight. These pellets work…
This model is compatible with the lego system.
A Tesla (Model 3 '21) J1772 Charger Door Insert/Holder by richardlonwalker . This is a helpful model for remixing for those who don't want to open the trunk to grab a charger adapter. Some suggested modifications based on test print (see…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Introducing the heavy bag carrier and handle! There…
J1772 Charger Holder designed by Ken . This is a great design with a slim profile perfect for an area with limited space. I just added higher cable holder walls similar to trentik's remix , and rounded the corners. Print in the…
Airgun pellet in .177 caliber for pellet rifles. The recess in the top is made to fit a 3.5mm bearing (for weight). They will not function without the bearing. I got 500 ball bearings in 3.5mm off amazon for 8 dollars. I've only made a…
Pellet holder for .177 caliber/4.5mm pellets. Designed for ISSF air pistol/air rifle competitions. Holds wadcutter (flat head) pellets. 60 spaces for pellets (6 x 10 rows), which matches the number of pellets fired during competition. It…
OK, so this is a remix of my own model here: https://www.prusaprinters.org/prints/5805-tesla-model-3-tray-wj1772-storage-slot . I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to…
This is the minimod for air venturi avenger, replaces the o.e. air stripper, this help remove that turbulent air away from pellet when exiting the air rifle, does help some with report. print threaded side down with your favorite PLA @…
Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…
We have a PHEV and wanted to have a place to keep the charger cord outside since the car is most often parked in the driveway. SCRAT82 had a great design but the screw centers were too close - we wanted the screws to line up with the…
This model is compatible with the lego system.
SPARE MAGAZINE MODEL: https://www.printables.com/de/model/569356-weihrauch-hw-100-magazine Upcoming features: -field test -overall finetuning Material: PLA in general but interface plate I recommend ABS ASSEMBLY: If needed glue the rim to…
Designed to be printed in PLA. 20% infill , 0.2 layer height. Print upside down. for best results , first prime the base then paint with flourecent orange paint. Optimised for JSB pellets but will work for a lot other brands.
Just got an EV after my old car finally had enough. I designed this wall-mounted J1772 connector holder with a built-in cable hanger that can be printed without supports. The mounting holes are for (2) #10 pan/button head screws. This can…
3 airgun .177 cal pellets -wadcutter -hollow point -pointed I print these in sets of 30-50 should take about a minute per using a 0.6mm nozzle Works quite well in my old crosman backpacker 1389
Holder for J1772 charger plug with Tesla adapter attached. I liked Gizmotoy's rounded plug holder (based off of jakepoz's non-rounded plug holder), but it doesn't fit Tesla's J1772 adapter, which is much thicker a little too close to the…
I had a look around and saw that there were some models like this already, but I wanted to make modifications and found that editing the STL files was a nightmare due to their construction in other programs. So, I set out to make my own…
Model of a warship inspired the British Enterprise Class Frigates. The model is designed to print in two main parts : Hull Deck – It is a tight fit slotting it into the hull and might need a little sanding around the edges of the deck.
Funnel to easily load BB's into rifles. Printed in PLA If you download and use please like this model and upload a make picture. Thanks
I thought the available shaker boxes were a bit steep pricewise and also very crammed for my big fingers. It started with the idea of a somewhat wider grid for convinience and escalated from there into a modular box system when I figured…
Inspired of the famous Jörg Sprave and his “sixneedler”, i created a simple version of the darts for 4,5mm (.177) airguns. I printed it from TPU one at a time with random seam. Looks ok to me :-) The maximum powerlimit here in germany is…
This is a 27mm diameter Monocore for a Monocore Suppressor for your .177 caliber airguns. THIS FILE ONLY INCLUDES THE MONOCORE. Since there are so many different-diameter barrel airguns, there is no way I could design an individual…
Another J1772 dummy socket for your charge cable. There are already a few of these on Thingiverse, but I decided to design my own because I wanted a cleaner look to it. The other ones that I considered printing all had a pretty big…
This model is compatible with the lego system.
Hi, this is my custom model for the outer slider plastics for the dt1990 and dt1770 headsets which is currently (aside from this now) only available from Beyerdynamic as part of a 40-euro slider replacement kit. The part put into use by…
This model is compatible with the lego system.
This is a commonly broken part in many Pioneer Laserdisc players. I modeled it close to the original but modified the design to accept metal shafts for the gears to ride on. The smaller top gear uses a 2mm shaft and the larger bottom gear…
uses m3 x 35mm screw AR mag release spring or similar m3 brass insert
This is a remix of hag's J1772 Dummy Socket model, for which I have enlarged the opening holding the J1772 handle's pin that keeps it in place in the receptacle. The receptacle itself is angled, and has two holes for screws*. Good for…
This .177 Caliber Pellet is made to shoot out of any airgun in this caliber. Compatible with FDM and Resin Printers Category: Sport & Outdoors
Attention, nouveau modèle ! Après 200 tirs avec l'ancien, l'avant du modérateur a cédé sous la pression. Attention new model ! After 200 shots with the old, the front of the moderator has given in under pressure.Attention new model! After…
Added a little update to this one: Strengthened structure in the cable hook area and updated for using 2 bolts rather than countersunk screws. Also made the back plate more robust. Probably overbuilt for most people… 7mm through holes.…
The thing is pretty basic and my printer says it should take 5 to 6 minutes. Also this is untested, it could explode or damage property. TRY AT YOUR OWN RISK. I will try it in my airguns, and update it with a partially tested or unsafe…
Holster your J1772 with Tesla/NACS adapter on the wall in a weather safe manner. Print in PETG, ABS, ASA, etc. for UV protection. 30% gyroid infill worked well for me. Mounting holes tested with Tapcon 3/16 concrete anchors.
The original design has a flat mounting surface that will allow hook & loop (Velcro), 3M VHB, or drill for screw/rivet, to attach in a convenient location. I elected to mount via velcro to the interior fabric wall in the rear nook of the…
.177/4.5mm airgun pellet clip off a small part of the bottom so it wont get stuck in barrel
I printed the Wall j1772 Holster by Falcon64 but I found out that the latch on my Morec EVSE didnt quite lock on his, it needed to be wiggled to catch and wasn't reliable for this EVSE. The Morec 32 amp evse I bought came with a wall…
Five Fit Tray-packing puzzle by Stewart Coffin (STC #177-A) Fit all five pieces into the square opening. Five Woods is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it isn't... if it seems…
GAMO CFX MODERATOR .177 (4.5mm)
Fits Model S, X, 3 and Y seat rails. Slides into the seat track to hold your J1772 adaptor. You need at least 1 inch of room on the seat track with the seat in the driving position. Recommended for taller drivers.
This wall mount is useful if you already have a Tesla Wall Connector or Mobile Connector setup at home and use a Lectron Tesla (NACS) to J1772 charging adapter for your other EV. It allows for convenient storage of the adapter next to…
Here is a J1772 dummy inlet to plug your charging plug into when not in use. There are a few others on Thingiverse, so just choose whichever works for you :). Instructions You should probably print with at least 50% infill to handle any…
V3 of Ken's great J1772 Charger Holder model with extra mounting holes
jonco223's design for a J1772 adapter for the trunk of a model 3. All credit goes to jonco223 on thingiverse. From jonco223: Utilize one of the plastic push pin clips in the trunk to mount this holder for the charging adapter. I printed…
A versatile IKEA SKÅDIS mount for Fluke 170 series multimeters, featuring a modular design for both multimeter and test leads storage. For mounting hooks use Skadis_Universal_Hook.stl from here: https://www.thingiverse.com/thing:2853257…
Just a simple cap to protect your J1772 style EV charger plug from getting dirt, dust, and debris in it. Useful for keeping the plug protected when traveling with a Level 1 charger. Snap on the cap, toss the charger in your trunk, and…
i got bored from normal pellets, so i created 2 types of pellets, one with a drill head, another with a hard pointy head
Additionally, please use the original sping or use a replacement spring: 9mm OD, 0.8 - 1mm gauge spring! Hope this helps!
A revolver bullet for the Dan Wesson .177 caliber air gun. Made this because I did not want to pay $50+ for 25 well made, metal shell, rubber tipped, bullets. This is made to work with metal, .177 caliber bb's. Made with Solidworks,…
Modérateur de son/Sound moderator for Hatsan Flashpup-S ½ 20 UNF (4.5mm or .177) Fonctionne très bien, la ligne de raccord du nid d'abeille n'apparait pas après avoir généré le G-code. Je passe un coup de taraud M12 en pas de 1,25 pour…
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
hiopilot@Thingiverse had an interesting idea for a J1772 holder. Previously, I kept mine in the glove box, but liked his/her idea. My 2020 Model Y doesn't have the connections he has pictured. It's sort of a diagonal vent arrangement.…
recommend setting the fill to 50%
This is provides a wall mount holder for a J772 CCS 1 EV Charging cable. I used this video to modify the original https://www.printables.com/model/460807-j1772-ccs1-ev-charger-wall-mount-holder as I had issues with ABS prints on my MK4S…
Bmw E30, E28 - rear sun shade hook holder. OEM-numbers: 82 12 9 413 177, 51461905393 Reproduced with the example of original part. There's 2 versions attached: ORIG - original fastening dimensions used. Was bad for my case, poorly fitted…
The design has fins for stability and a 3.5mm bb on the nose for proper weight distribution. Resin 3D printing or Fine Nozzle FDM
Bolt EUV J1772 / CCS1 charge handle cover. Version 2. Used to keep snow, ice, rain off he latches (on handle, in port).
After building a Honeycomb Storage Wall (HSW) I decided I wanted to put a lot of my leads and electronic equipment on the wall, including my Fluke 177 Digital Multimeter (DMM). So here is my version of a holder that allows the user to…
The original J1772 holder by Ken worked well for me, except that loops of cable hung over the top would frequently fall off as the lip is quite low. When my old one broke I decided to modify it to add a higher lip. While I was working on…
A dummy socket for docking your J1772 style EV charger when not in use. Say goodbye 👋 to the plug dangling on the ground and getting dust, dirt, water, and snow in it, “Click” it into this dock and save yourself the headache! Designed to…
I took rodsmith's J1772 to Tesla Adapter Holder from Thingiverse and tweaked it. Updates include (see attached pic): Increase this face for a tighter fit and added radius for assembly. Add radius and thickened the overall width of the arm…
Needed a set of wall-mounts for my Fluke 87V and Fluke 177. Went through a few revisions so that they slide on perfectly, stay secure without moving, but also pop off easily when you want to remove the meter. Mounting holes sized for M4…
ATTENTION : Ne pas tirer sur un humain ou un animal / WARNING: Do not shoot at any human or animal. Porte-cartouches imprimable pour billes .177 (4,5 mm), conçu pour un stockage sûr et pratique / Printable pellet holder for .177 (4.5 mm)…
This is an external module to secure the air gun pellet box from accidentally opening. It costs around 6-10 EU on the market, so I thought it would be a nice thingy for those who are practicing competitive or hobby target shooting. (Note:…
Tesla quietly changes parts sometimes. I believe this will fit 2022-2023 Model Y with carpet lined door pockets. It may fit earlier models. It may not fit 2024 Model Y starting in early spring. I printed in PETG for better temperature…
Storage for J1772 EV charge cable.
Modeled for the Bolt EUV charge port. Dimensions to check if your charge port is compatible: 83mm tall From the apex/top of the curve, to a bottom edge of the cover 86mm wide Edge to edge 135.088mm radian (overall curve) Purpose: Cover…
Walther Rotex RM8 PCP airgun single shot magazine .177 caliber
I made this because I lost mine.
