489 models
Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…
Print approx. €15.13–€18.49 excl. taxPreliminary estimate for one variant
Safety first, so if you are making any project with high current lead-acid battery you need to fuse it. This design is allow to use holder many times and not afraid about wire/terminal damage. distance beetwen mounting holes - 27mm. Bill…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
The 9×19mm Parabellum (also known as 9mm Parabellum or 9mm Luger or simply 9mm) is a rimless, tapered firearms cartridge. Originally designed by Austrian firearm designer Georg Luger in 1901, it is widely considered the most popular…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This 19mm inner diameter ring can be just what you're looking for to remind that special someone how much they mean to you. Once the ring prints, use some force and spin the inner and outer ring in opposite directions to free up the ring…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This is a fidget ring with “PRUSA” embossed on it. It prints as is, let it cool before removing, it takes a little force to for the inner ring to break free from the outer ring and spin freely, to do just spin each ring in separate…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET
Halter für 12 Nüsse mit !/2" Antrieb bis ca. 19mm. Mit Rastfunktion. Anfangs etwas schwehrgängig, aber das gibt sich, Print instructions Infill 10%, PETG, 150%
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
I suggest :Simply mark your Laser Focus Distance from Laserhead to Workpiece on the tool. It's simple and one of my favorite used Tools for my Laser. I Printed it with PLA in 0,15mm LH
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This valentines day remind yourself or remind someone close to you, that you or they may be “Forever Alone”. The ring is 19mm. To allow the inner and outer ring to spin freely, use some force to turn them in opposite directions, breaking…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET
DIN-Rail mount/adapter for those common 19mm Push-buttons. Tried designing to save material and minimize support usage. Check out the .3mf file which also includes a pre-configured engraving for your application.
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a casa for the Radius gauge 02-19mm Concave & Convex PLA or PETG Merry Christmas and New Year 2022
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
a replacement end for wardrobe clothes rail
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
I didn't have PVC laying around, so I quickly modeled a dowel rod to use. For some reason the STL loads really small in the slicer, so make sure that the dimensions are 19mm diameter (x and y) and 85mm tall/long (z). I printed in PETG…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
Print tips: Best to be printed with full perimeters (7 perimeters with 0.4 nozzle diameter) to be more stable.
Print approx. €14.80–€18.09 excl. taxPreliminary estimate for one variant
PSU switch box - hole 22x19mm with cap v02
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
A complete set of 3D printed open-end and ring wrenches ranging in size from 8mm to 19mm. Each wrench is modeled with realistic proportions and fine surface detail - perfect as a decorative item, workshop display, or dimensional reference…
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
Socket set holder for 7-19mm sockets. Fits my craftsman set. Printed in PLA. If this design was helpful, please consider liking the design on Thingiverse! Check out my other socket holder designs: 1/4" Drive Metric Socket Set Holder (4,…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.0mm set…
I was looking for an inexpensive way to enclose my 3D printer (Elegoo Neptune 4 Pro). I designed several parts to connect 19mm wooden rods. This allows for the rapid construction of enclosures for various purposes. Besides printer…
No support needed. Print in ABS, I didn't test it yet with PETG, but it's on the way. If you use a magwell, make sure to take button head screws, my socket heads ones make it more difficult to insert and extract (but they may lower the…
Best printed with PETG for it's flexibility. PLA works too but may be more difficult to snap on the tent pole. I've had luck with infill anywhere between 10-30%. This was designed to print easily with no supports needed. Updated…
Herewith i want to share my design of a RC boat motor mount. The motor mount is designed to mount a Graupner Bushless Speed 600 BB motor but can be used for numerous types of brushless and brushed motors with a mounting diameter of 25mm.…
Based on Sound-Maker's idea for a 13mm/ 1/2", I designed a Gardena nut for the 19mm/ 3/4" system. I have tested the nuts with some hoses and also hose connectors and it works fine. I noticed that some threads are smoother or different…
Print without support at 0.2 or better at normal profile. For better adhesion you may want to use brim.
Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max). The files provided are only for the left side and need to be mirrored in the slicer for the other side. Print settings: Infill=15% gyroid /Layer…
This is a flashlight mount for the Steambow AR6 Stinger II crossbow. It fits the Steambow 19mm flashlight and laser to the lower picatinny rail in front of the vertical front grip. This position allows you to access the power buttons…
Designed a vertical stand for a Lenovo Thinkpad T480s laptop (pictured). The slot is 19mm wide. This was printed on a Creality Ender 3 with 20% infill using PLA without any supports. YouTube Video:…
The 9x19mm Parabellum is a cartridge that was designed by Georg Luger for DWM's Luger semi-automatic pistol. Category: Sport & Outdoors
Radio Control Airplane for brushless motors hole spacing 16mm x 19mm. Use to mount 22XX multicopter motor to a rc airplane firewall Category: R/C Vehicles
This is my 3/8in drive gridfinity socket holder for 10-19mm shallow and deep sockets. I used Husky brand sockets (Home Depot) for measurements but there is a bit of extra clearance so other brands may fit. For text filament swaps at…
14mm to 19mm adapter for FPV cameras, works for any standard Nano fpv camera. No need for any sort of supports or a brim. Tested on my runcam split 3 nano, had some crashes and shows no signs of wear. Included v2 : Is a little beefier…
Dieser Anschlag ist für Metalllineale mit den Maßen 19mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
I am slowly moving into my new toolbox. This model organizes my wrenches from Wera in a neat way. Last photo shows how much grid it actually takes – 6 by 5. Like and post makes if you print this! Thank you. Printing I printed with…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 18.9mm set…
¾ Garden hose screw adapter. Screw is 32 x 1.5mm so low layer height is must. 0.15 layer height 3 perimeters "Outside perimeters 1st" option in slicer. material - suitable for outdoor, Don't use PLA Body: needs support “on plate only”,…
To hang a standard 8-19mm 11-piece wrench set to a wall. It fits all brands, bit it's designed for a wera joker 6000 ratchet ring set If you want the change direction small to big, left to right just mirror both models. They have a small…
Super simple design, prints and works great. I would recommend to use PETG if you plan to use it outside where it is expose to the elements. No support needed
Update. V2. Made a better thread, easier to screw. And added a ring for spiral hoses. See pictures :P Remixed the connector in plasticity, so it's more comfortable to screw and it leaked less and also printed without supports. Overmodeled…
Here are some 9mm x 19mm Parabellum storage boxes and trays. These are designed to be able to arrange large amounts of bulk 9mm ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 12 trays…
I was always annoyed when my painting cones or pyramids moved away on the workbench when oiling or even polishing wooden boards … So I just thought about having a painters cone which uses my workbench dog holes, or which I can also screw…
This is 9X19mm stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/12/2023 - Text vertical adjusted. Category: Tool Holders & Boxes
21mm Picatinny Laser/Flashlight mount was has a Ø19mm pipe (Ø19,2-Ø18,80) What you need: -2pcs M3x10 screw and 2Pcs M3 nut -1pcs M4x30 screw and 1pcs M4 nut Print from PETG, 4wall, 5-5top button, 20-40% infill
Einfacher Türhaken in zwei Varianten, breit und schmal. Türblatt 16mm und 19mm. Simple door hook in two versions, wide and narrow. Door leaf 16mm and 19mm.
Length: 19mm x 19mm, width: 14mm, thickness 2mm. The diameter of the hole is about 4.3 mm, for an M4 screw. I also added a mounting bracket with a spacer which can save a lot of time when measuring the distance between the components of…
Wrench 19mm, contains internal geometry to increase stiffness. Print with many perimeters
Created this strong Zip Tie Socket because the ones I got ran out. Printed these in PLA and PETG, fit most small Zip ties. After printing the Model (best in 0.15mm layer height with 3-4 perimeters and NO supports), tap them on a standard…
Very large crochet hooks are often hard to find as well as expensive, so I created a US size S (19mm) hooks with the customizer below. I had to shorten it due to the limitations of my print bed, but it turned out very usable. At 0.2…
Organize your grow setup at home and get rid of all the cables flying around! Make sure to measure the diameter of your tent poles first. Most manufacturers use 16 or 22mm poles from my experience. Have fun!
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) 9mm Luger 9x19mm Parabellum Snap Cap Dummy Training Bullet Cartridge Round w/ TPU Firing Pin Cushion Print the cartridge/bullet in PETG or ABS, and…
Tool to remove and insert wheel nut cover. 19mm, fits covers of wheel bolts from: Audi VW Skoda Seat … Others Strong fit pulls even the most stuck parts, as well as covers over security bolts.
9x19mm (9mm NATO) Ammo Can Label Stencils! There are a lot of variants here.. they are as follows: - 115gr FMJ - 124gr FMJ - 147gr FMJ - 125gr FMJ \\ - 125gr JHP - 124gr JHP Enjoy!
Based on Sound-Maker's idea for a 13mm/ 1/2", I designed a Gardena anti bend nut to prevent the hose from bending for the 19mm/ 3/4"system. Also you can find my 13mm / 1/2 " version here:…
Custom bicycle valve caps for your ride. The threads are built in to the dice. Print, Plug and Play. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/kFStzLcNeOh Print Settings Printer: Qidi Tech x-One 2…
These TPU landing feet are custom-designed to mount under each motor on the Rekon 10 Pro frame, providing durable skids for smoother landings and protecting the frame during takeoff and landing. Each foot/skid has 4 mounting holes to…
About a like and the posting of a make I am happy! Happy printing :)
Breathe a sigh of relief, this will work fine for their garbage FPV cam mount design. Print with 100% infill in TPU.
RC Airplane Tire / wheel 65x19mm for a 3mm shaft. Printed in TPU with no supports, outer wall 3, infill 10% and Cura infill pattern to concentric. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…
Printed with PLA Layer high: 0,25mm Infill: 18% Gyorid M4 screws: 3x 12mm, 3x 25mm 5x M4 nut 8x fan screws Working with AC DC 12V 2a Adapter - PWM Controller (0-100% controlable) - 2 fans connected in parallel
**Updated model again - I updated the model so the mount is shorter (less swing weight), main change is I inverted the dove tail. * Updated mode l - The file title with "update" has a small change where I rounded off the leading edge of…
A 19mm bench dog, for my workbench. For greater sturdiness, I printed it as shown, but everyone can print it as they want. It's indispensable for me. Printed in PETG, but maybe PLA or PLA+ is also fine, if anyone tries it let me know.…
I've tried other 15mm to 19mm adapter and they usually work well. But I had a problem once with the adapter being a little bit to lose so I made my own with no tolerance. the inner diameter is exactly 15mm and the outer diameter is…
i couldn't fit my Stanley Tylon Short Tape Measure 5m / 16' x 19mm in the ordinal design so i increased the size to fitment
This is for Zach Freedman's Gridfinity System. A Gridfinity 2x1 bin to hold a 19mm Electrical Tape (or Insulating Tape). With magnet holes. Enjoy!
Stop block for universal T-Track 3/4" Wide x 3/8" Deep / 19x9.5mm Works with 3-in 1/4 hex screws for the arm, and 1-1/2inch for the block. Here is a link to the track I used for my table saw and my router table:…
The TPU parts are just press fitted. They cycle fine on a Walther PDP.
FlyFishRC Volador VX3.0 VX3.5 VX5 Vibration Dampers for 19mm Camera TPU. Found the original silicone ones are way to soft for a 19mm analogue camera. I couldn't find an STL online so i made one.
419mhz Center Freq. Hope the bandwidth is good. This was model 100% to a the calculations of online calculations to the 0.5mm. Going to be intresting to see calculation vs result. I suspect the plastic will have effect but since center is…
Didn't have any 9x19mm snap caps, so I printed my own. Took the measurements straight from CIP. The body has a Ø4mm hole with a rounded end, so you won't need any supports. The insert should be printed in TPU. In theory it has a radial…
19mm Lug Nut Covers for longer lug nuts. No Supports needed I printed in PETG and they have worked perfectly so far.
Note: I made an updated version of this pod that uses zip ties to secure it. There is much less play in it, I recommend using that new model: ____________________________________________________________________________________ This is a…
Tube clip for 16mm and 19mm tubes (growbox frames)
This is Spiral Vase Mode 9X19mm stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/14/2023 - Fixed *-50 slot cut into lip. 05/12/2023 - Text vertical adjusted. Print Settings…
This is a little spacer (printed out of TPU) that allows the DJI O4 Air Unit “Lite” to fit into frames that have spacing for a 19mm camera. It also allows for a small amount of vibration absorption since it's not very rigid. I used the…
Made this because I wanted sockets to be in angle and not straight. Nor up or side. I can get a good grip and sockets won't fall down even when this holder is in my trucks wall. Added new socket holder for 20-27 millimeters. Printed this…
Simple print for sports shooters and hunters.
The source marked this model as adult content.
My OEM plugs fell out, so I designed new ones. I just measured the inside of my handlebar tube and with the tape end wrapped inside, it was 19mm. I made three sizes in case 19mm was too loose. The size measures the widest part that goes…
I used ESUN PLA PLUS for this model and it gives enough flex to the detents this way. but other materials might work fine as well. Category: Sport & Outdoors
Box for 100pc 9x19mm rounds. To assemble this box fasteners are needed: -3x M3x20mm Socket Head Screw -1x M3x30mm Socket Head Screw -4x M3 Nylock Nut Material: PET-G, PLA etc. Layer high: 0,2mm or lower Supports are needed.
I've designed these dual-material HIVE palm rests to match my 75% mechanical keyboards (specifically Keychron's Q1 and V1). Video: https://youtu.be/W3amrgXQBYA Key Features: 75% sizing (w: 330mm, d: 80mm, h: 19mm max @5º slope) Dual…
The AtomRC Dolphin motor mount is pretty weak, and barely glued in. This mount replaces the stock wooden one, with an insertable mount. There is an included 19x19mm plate which attaches via m3 bolts and screws into nuts on the mount. Best…
I made model i need for one of my machine. It's cmpatible with original one. Chain is moving 30 degrees between separate link of chain. #Edit 2 new models inside - fixed end + start och chain Enjoy :)
Remixed to fit a 0.75" (~19)mm leash Added raised dots to increase friction Leash slot width is undersized by 0.5mm for a tight fit. Designed to fit this leash : https://www.amazon.com/dp/B000H594R8 Print instructions Category: Containers…
Cutting Jig to make PTFE pieces for the PTFE Holder and Pulley Body. Original design for the PTFE and Pulley Body may be too small for the included PTFE tubing. If during assembly the 19mm PTFE tubes are damaged, this jig allows…
New Update : Benchdogs for tables with 19 mm holes. I designed the model myself and tested it until it fits perfectly! Printed with PETG OsVac M40 and Festool D27 combination adapter to make your own nozzles: osVac M40 and Festool D27…
This is another update for my foil assist motor mount, this version is shorter than my previous version so there is less swing weight. I recommend printing the cone off in 95A or 64D TPU and the mount in a stiff filament. The big change…
This is a comprehensive set of 3D printable 9x19mm Luger dummy rounds (snap caps) designed for safe dry fire practice, function testing, and malfunction drills. These models are designed to protect your firing pin and allow you to cycle…
I recently got a new table saw, DeWalt DW7491. The miter slot size and location was different than my previous saw, so I'm working on remaking some of my jigs. I was going to use the old method of trial an error to cut down wood runners,…
This adapter allows you to mount a Caddx Nebula Pro Nano, or any 14x16mm, camera to a 19mm camera mount. Use this to save weight in or reuse equipment you already have.
2 models, newest has some top protection for wires against blunt impact (forgot to smooth corners sorry). READ: With the camera removed from stock hardware, the camera will snap into place for TPU prints (please only use TPU!). If you…
Organize your grow setup at home and get rid of all the cables flying around! The XL sized clips are for anyone that needs to fit more that 3 cables. Make sure to measure the diameter of your tent poles first. Most manufacturers use 16 or…
Print flat for optimal strength. The underside fillet might not print perfectly but it can be easily fixed in post. Pictured as used for hardware on a DIY packraft (1" version). For permanently sewn or welded-in fixtures that will be hard…
This is a paint bottle shaker for Army Painter bottles. It fits on a Bob and Brad massage gun with the included seals of the gun. The connector diameter is 19mm. Put one of the replacement joints of you gun on the base. You need a 8mm M3…
After my store-bought shower head holder broke, I got fed up with constantly buying replacements, so I decided to design one myself. This custom holder is easy to install and fits perfectly on a 23mm shower rod. Need a different size? No…
Remix of QUICK-CLIP (GEN 3) for 19mm strap
Official DJI Nano camera canopy of the ASBO-X This is a canopy for a DJI Air unit lite and 19mm camera combination. For the Caddx Polar, Caddx Nebula, RunCam Link, etc. Based on the Original VistaPickCanopy designed by Thingiverse user…
This Gridfinity holder is designed for 1/2" socket set from Wera. It takes 1x7 space on the grid and I had to print it diagonally on my P1P. I got used to “take it easy” colors from Wera and I wanted to display these sockets in a way that…
![FPV Drone Landing Feet [19x19mm] (eg: for the Rekon 10 Pro)](https://media.printables.com/media/prints/1082369/images/8183131_8ecd968c-6b23-464b-bf70-d2fc79b6c8d3_73b21e60-60d6-45c5-a53f-c65c20a96fbe/photo2.jpg)
