114 models
This is my original Pile of Poo 3D model, first published on Thingiverse on 2016/07/20, now hosted on GitHub . I am publishing it on Printables as well so everyone can more easily attribute it as a remix. Check the GitHub repository for…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant
3D model of the 1FNT x-ray file from PDB
Print approx. €15.35–€18.76 excl. taxPreliminary estimate for PETGSource material: PET
Update V1.1 (Loose fit .2mm each side) As some of You can have a problem with fitting inserts into box as it was realy tight fit, I've added an stl to a bit bigger box 0,4mm in x and 0,4mm in y so there will be .2mm on each side, it will…
Transform your ultra-portable Arzopa Z1FC 16.1" 144Hz gaming monitor into a permanent workstation setup! This custom 3D-printed adapter adds standard VESA 100x100mm compatibility , letting you mount it on walls, arms, or stands for…
Originally published here: Xiaomi Redmi Note 7 & 7 Pro m1901f7 case by tato_713 - Thingiverse This case was teste on the phone Xiaomi Redmi Note 7, it may be compatible (because its size) with the Xiaomi Redmi Note 7 Pro (model M1901F7S).…
I made this case for my mom's phone. Sorry, I don't have any pictures. Fits well, but my first go had the usb power hole placed slightly wrong and had to enlarge the hole after printing. I have since fixed that in the model but have not…
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
This is a remix... but I can't find the original model anymore :/ Version 1 is with hole for charger (not tested) Version 2 does not have a hole for the charger (to prevent dirt from entering the port, it charges wirelessly) Added .stp…
CHANGELOG: 26 Mar 2024: Added standard sized cutouts for 6x2mm magnets to desk stand (requested)
My brother in law's mother was the proud owner of new small house with built-in air conditioning by Gree. All that was lacking was a nice wall mount remote holder for the remote (model YAC1FB9). Apparently Gree is one of the many brands…
Wowstick 1F+ that holds all bits including long bits and some other accessories. It uses 6x 5x3mm magnets in each half to keep it closed. If you have larger fingers, it may be harder to grab the bits because they are fairly close…
Wall mount for the Wowstick 1F+ for the Honeycomb Storage Wall. Needs supports, print at .2.
Slightly modified version of Bram's great wowstick orginizer. Here is the list of midifications: Widened hole for (de)magnetizer since it was too narrow for mine to fit. Original: 26.0mm New: 27.5mm Implemented “ floating hole hack ” for…
I designed a simple holder for my AC remote, as I was unsure if the models available on Printables would fit. Therefore, I quickly created my own design. This holder is specifically designed to fit the YAP1F7 remote. Additionally, there…
ADF-11F Raven A large fighter created by North Osea Gründer Industries. The Erusean Air and Space Administration (EASA) planned to create a UAV-model and a few manned models; this aircraft is the latter. What makes the ADF-11F stand out…
Print settings( optional) Quality: 0.2mm Walls: 5 walls supports: no
Hardware can be found here: https://moosemodshop.com/products/w01f-double-stack-bolt-action-rifle-hardware-250-fps-copy Build guide can be found here: Feel free to join the Moose Mod Shop discord for questions: https://discord.gg/EBNumh8C2u
Organizer for the wowstick 1F and all the bits The base supplied with the screwdriver come inside the printed piece There are identified spaces for each bit + 10 more on top for the spares Print instructions printer in PLA layer: 0.3mm…
Its a box for my bits..., Its a Bits Box! The original "case" that came with the Wowstick is pretty but not functional (in my opinion), so I made this one. It holds 52 shorter bits and 4 long ones. A final word for the hinges: I used a…
I bought the fantastic XIAOMI WOWSTICK 1F + lithium electric precision screwdriver and, as more and more often happens with Chinese hi-tech products, I admired the fantastic packaging and the completeness of the accessories, including a…
The cover from Blackbox Life Recorder 21f / In a room7 F760 made real!
Wanted to include the Wowstick logo on the lid, so here's the lid with the logo cut out. Both tight and loose fit available.
Xiaomi Wowstick 1F+ Individual Holder for Honeycomb Storage Wall (HSW) Wowstick is one of the most favourite electric screwdriver used by Mini 4WD hobbyist. So i remixed Enahs' Parametric Circle Bin to create a ready to print file. Tested…
Desk stand for the Fortinet FortiAP 431F using the ceiling mount brackets included. The stand has holes for 2 mounting positions as the 431F either has the cables coming out the bottom but the logo on the front is upside-down, or the…
Keep your Wowstick secure and organized with this custom-designed 3D printed case! Specifically made to hold the Wowstick precision screwdriver tool and its bits, this case provides a convenient and protective storage solution for makers…
Stand for the Teenage Engineering “OP” line of synths. Works on a desk or in your lap, and is designed for use with: OP-1 OP-1 Field OP-XY (retains access to the pitch bend controller) The minimum angle is 20º and supports larger angles…
Its a tight fit for the wow stick metal stand, but you can gently push it into the print. Print instructions Print with pla.
Gehäuse für HomeMatic HM-LC-Sw1-PCB Funk-Schaltaktor 1fach. Zum Fixieren wird eine M3x5 Schraube benötigt. Ich habs mit PETG gedruckt…
Lifting pad / riser block with notches designed for the stock Vixen dovetail and rings on the Askar 71F Flat-Field telescope. Effectively raises the OTA by 7.4mm which provides enough clearance so that you can slide the dovetail under…
2024/01/12 - Update. The resin printed part became brittle and unfortunately broke after almost a year of use. Perhaps a ‘thicker’ version or different resin would hold up longer. 2023/01/28 Replacement brackets to hold heater instrument…
Holder for Wowstick 1F and screw bits in tubes with option for frequently used screw bits. Features Wowstick space has hole to support USB-C cable Simple holder, just tubes no extra bits Holder, with space for 5 or 9 frequent screw bits…
A simple tray to hold the screwpad, the wowstick base holder, plus other items. Fits on an Ender just be sure to turn off the skirt in the slicer. I've included the .blend file so adjustments/logos/etc can be made (expect ngons and other…
Print standing upright and glue two half's together. Do a less messy glue job then I did. ;-) Orca slicer fuzzy skin settings use 0.3/0.3
Simple adapter to put a micro sim (3FF) in a phone that takes standard sim size (1FF). Based on a model by user "Flatrongraad" https://www.youmagine.com/designs/nano2sim Modified in freecad, printed in PLA on a Prusa i3 MK2.
I wanted a nice clean all encompassing storage solution for my wowstick that would work on the Honeycomb Storage Wall and hopefully allowing for charging. I couldn't find onw that was clean, compact, stored everything (including magnetic…
I really like the original design. However, after printing, I found out that the demagnetizer is sticking out and it's difficult to stack another gridfinity block on top of it. Also, I want to use it in combination with 6u high storage…
Friend of mine lost this wall mount bracket for Hikvision IP camera (DS-2CV2Q01FD-IW). My first model in Tinkercad.
Hey team, Another quick model to solve a particular problem. The nozzle which comes with the Makita MCL281F is fine around the house, but isn't very useful for the inside of a printing enclosure as it's a little too short and thick to get…
I previously printed Twxii's beautiful case for the Wowstick 1f+ set. Then I thought I should have this in a rugged case - so I customized Rainer Backes parametric rugged box to fit the case snugly. I actually fits so well you don't even…
Download this cute floral pot design as an STL file. Recommended settings: use supports and nozzle 0.4 mm for best results.
As described by title, it's a storage for Wowstick on the Ikea Skadis pegboard. The alignment guides are designed to be printed without supports. The holes are all the same but the one on the left is for the screwdriver as it is open on…
The Lite version nixes the screwpad, but keeps the holder and fits in a 2x6 footprint. The Xlite version cuts out both and fits in a 2x5 space.
I found the anodised finish on the handle of my Wowstick 1F+ to be a bit slippery when manually tightening/loosening screws. So I made a handle grip to go over the Wowstick to make it feel more like a traditional screwdriver. It has a…
Original model and build instructions here: https://marcosatm.com/2020/06/04/2in-crayford-focuser/ This is based on the nut version as I found the heatserts for the bearings difficult to get right. I've added a lug to secure the reduction…
Bahtinov Mask for Askar 91F refractor. Sits in place of dust cap
3D print a frame for Adafruit LED Glasses IS31FL3741. Use any Adafruit Feather compatible board to control the LED Glasses. The Feather is secured to the arm with M2.5 x 6mm screws and hex nuts. The two arms are secured to the frame with…
Print flat side down with 0.15mm layer height. No supports required.
The original version didn't fit my metal stand so I enlarged it and moved a bit so you can still put a 4x2 bin on top. Comes in two versions for 25mm and 27mm wide (de)magnetizer. I printed mine in PETG and this stuff likes to curl on…
The Feather Sense nRF52840 features a built-in PDM MEMs microphone for audio input. Audio is sampled via the onboard PDM microphone. The sampled data is then visualized with color. YouTube Video: https://youtu.be/LPXLpRKf-MI Guide:…
Ersatztülle für Tülle Kopfstütze Porsche Recaro 911F. Aus ASA gedruckt auf Anycubic Mega X. Drucken mit Stützstruktur. Anschließend geschliffen. (Dübel in Akkuschrauber, Tülle aufgesteckt um die Oberfläche mit einem Cutter abzuziehen und…
Print standing upright and glue two half's and holder together. Do a less messy glue job then I did. ;-) Orca slicer fuzzy skin settings use 0.3/0.3 to attache to the multiboard you will need 2x…
Simple box upgrade to fit all bits inside of housing for Wowstick 1F+. No supports needed, since they are integrated in design. Part must be printed at 0,15mm layer height to get supports off! You will need to rotate design in slicer, to…
This is a remix of the original model by @RenatoKulman. I made this by request to fit a Lenovo M10 TB311FU model tablet. The main idea was to have a slim small formfactor usb-c cable that hides in the wall mount. I have added the used…
Simple base for your Wowstick that holds all 3 sets of bits and the included aluminum base. Modeled for better desk organization. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill:…
2 Löcher in der Wand fürs anschrauben des NSPanel sind noch erforderlich Infill: 100%
Seal for the Wowstick 1F + rugged box
Should friction fit, but better with a M2 threaded insert and a M2x8 grub screw. Should be printed upright, with supports on build plate only for the hole
The stock Wowstick base allows the screwdriver to easily topple over. This replacement base remedies that deficiency. The model is posted in both 3MF and STP formats.
Replacement part i made for my pc case.
YBE1F remote controller holder. Slot is 50mm long, 14.5mm wide and 50mm tall
This a simple tablet holder for the FYC JK8801F Folding Treadmill. The area for devices is far too small for a tablet to sit in landscape view, so I created this that slots into the existing device holder. I printed mine in PLA with 15%…
Adapter for connecting the Makita LH1201FL with Kärcher Category: Tools
I designed this WOWSTICK 1F+ caddy to make bit changes quicker. It includes a holder for the USB charge cable and a spot for a Wiha micro bit extension. The screwdriver can be stored with or without the longest bit still installed. Micro…
Print on the face side with supports for hitch pin holes (no supports for wires hole). Keep it as high as you can when putting on to prevent breaking the plastic. You can use a double sided glue tape to fix it to the hitch receiver. Link…
This is a model of one of the two different brackets. The other one I used was from here https://www.thingiverse.com/thing:5894963 . The handle uses two different brackets. I created this one.,
Great design but noticed when putting the cable in it kept wanting to pop out so I added a small lip to keep it in.
This is a wall‑mounted tablet holder designed specifically for the Lenovo Tab 10.1" (TB311FU) . It mounts directly onto a Schuko wall outlet , using the existing center screw. For a secure fit, replace the original screw with one that is…
Mounted Chisel Plow - 9 Shank 11ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
A integrated workspace that provides a recessed location for the wowstick, screw pad and an insert from the rugged v2 case. Allows for the Wowstick to maintain a vertical orientation for easy grabbing. The screw pad is recessed in,…
Cylindrical case for the Wowstick 1F electric Screwdriver and all three bit containers. Case top also doubles as a stand for the screwdriver.
Printed on Bambu X1C in both PLA and PLA-CF with 0.4mm nozzle. Print vertically with a brim, no supports required.
This is not made to print but if you want to print it as a test dummy feel free to do it.
Fits for the lever to tighten the saw table Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusament PLA PETG Black Category: Machine Tools
Print with PLA with supports (I use tree supports, base only). Attach with command strip to wall or under your cabinet. Turn blade counter-clockwise to lock, clockwise to unlock. Original CAD model can be found here .
This is an update of the Wowstick 1F+ Box made by cartoleba on Thingiverse, due to changes in the 1F+ kit for 2025. I prefer this case as it is the only one that can accommodate all the components of the Wowstick 1F+ kit in a carrying…
Ball bearing cap for WOWStick 1F designed for usage with 1 608 ball bearing Found it unpleasant when I had to screw in the last mm of a screw by hand. With this cap there is no sharp edge any more and super easy due to the ball bearing.…
Phone holder (Galaxy S21FE with transparent TPU case on) for the JBL boombox 3
Air conditioner remote control holder model YAY1F2. An ideal way to store the remote control and prevent it from getting lost. The remote control shown in the photos is used in air conditioners from brands such as GREE, Dreiha, and…
I decided to have a try at getting some better nozzle visibility this weekend, I modeled this unit and printed everything and installed today. Performance is on par with the stock set up more or less. It moves the fan back and and keeps a…
I used this for my Wilfa heat pump remote with controller type YAG1FB3.
Découvrez le modèle 3D du Grand Stickman Discret en trois parties avec le branding Kick1Fire, une représentation unique et captivante d'un personnage emblématique en taille réelle. Ce modèle ludique et minimaliste, en collaboration avec…
This hook unlocks the saw table to set the cutting depth in table saw mode. It is attached to the cutting guard (Europe only) with two screws. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't…
Smaller and with support for WowStick 1F+ magnetic pad Remix of: https://www.thingiverse.com/thing:3944441 Thinkercad link: https://www.tinkercad.com/things/a6wWLuG9IoR-wowstick-wiha-percision
I was looking around for a good new SKADIS holder for my wowstick 1f+ that i got for my birthday, but to my suprise, i didnt find any (good ones)! So i modeled this myself in fusion360. It has all the files (STEP, F3D, STL and 3MF),…
Replacement part i made for my pc case.
DeltaSnap‑3 is a sleek, easy-to-assemble 3D-printed rocket designed for hobbyists and makers. It prints in three parts for quick assembly. Compatible with Estes A8, B4, B6, C5, and C6 engines, it reaches altitudes up to 981 feet with the…
i upload all formats, stl, 3mf and step. it fits vitus DHF112 front hub left(brake) side end cap. but techniquely, almost all modern mtb hubs follow the exact same dimensions: 110mm in total width to fit the forks, 15mm inner diameter to…
This is a replica of figure F from the Grenadier Wizards 2001 box ( http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2001.jpg ) Print Settings Printer Brand: Monoprice Printer: Maker Ultimate Rafts: No Supports: Yes Resolution: 0.1mm…
I replace head gaskets on 94.5-97 Land Cruisers with 1FZ-FE engines almost weekly. Cleaning the block surface makes a mess and I was tired of having to stuff paper towels into the cylinder bores to prevent debris from getting into the…
Replacement light diffuser for liftmaster early 2000's model(s). Posting two versions. 1) Thickness compatible with original 2) Thin wall.. 1.7mm so that will be three layers. The corners have more material around the mounts points since…
If you're finding yourself here voluntarily, then I apologize in advance. I was attempting to retrofit an existing AP installation that had PoE to connect a FortiExtender for support purposes, since it was in a wide-open area with no…
Body Marker for edding 141F Pen Body marker designed specifically for the edding 141F pen, available in heights of 6, 7, 8, 9, 10, and 11 mm. In addition, there is a separate holder for the rear end of the pen, allowing it to be guided…
Requires a single screw with max 5 mm thread outer diameter and a 10 mm wide, 5 mm tall head. There's a cylinder around the screw hole in the STEP file to be used as a 100% infill modifier.
This is just a small tray to neatly organize a FrSky XM+ / Jumper R1F and a Eachine nanoVTx, which greatly increase range and video quality. Weighs in at around 1.5g, while both components are friction fit they might come loose in harder…
I needed to make Salus wall thermostat just portable, with plug and socket on cable instead of mounting it on the wall. So i designed this back cover. to safely cover AC wires, and allow controler to stand on the shelf. Holes have…
I needed a way to stack three 5.5v 1f capacitors to make a sort of “battery” for a new flying project ( Coming Soon!!! ) so I modeled something really quickly printed it and glued the capacitors in it and then soldered the corresponding…
Printed with TPU 95A 30g of filament, 3 hours print Supports required for the bottom ports 99% rectilinear infill Monotonic first and top layers Use a smooth textured bed Use a sharp stilletto, chisel or knive to cut excess filament Paint…
