Counting matching models…
THIS IS THE FIXED VERSION Hello everyone, I’m P1lotz , a professional 3D artist from Scandinavia, and I have been working in this field since 2019. This is my first articulated print ever. I really hope you like it. More models like this…
This is an open-source Plastic Antweight combat robot, intended for the SCAR component kits available from Turnabot and Team Malice. This and other community designs can also be found on the Team Malice website . It placed 4th overall at…
NEW - now available for clip together baseplates If you want to save some filament on this print I added a version that uses my clip together baseplates https://www.printables.com/model/633086-gridfinity-clip-together-baseplates/files To…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
Designed for supportless printing with 0.6mm nozzle and 0.2mm layer height. Overhang angle is 25°. Mount holes accept 2.9mm flat head screws.
Motivation I've got several requests to adapt my design of the clip for the larger 45/65l boxes ( Never lost Ikea Samla Clip (45l + 65l) ) to the smaller boxes 5l/11l/22l. So far I didn't use the smaller boxes as dry boxes and until…
A tribute to Bite Force, one of the top Battlebots of all time. I have included the STEP and F3D files so you can change up anything you like. Hex standoffs were 6/32 thread, .5" long. Motors are Servo City N20. Weapon motor and most…
500g(1lb) Silica Gel Desiccant Box (Updated October 2019 with 1mm thicker sides to make it stronger and easier to print) Box to contain 500g of colour indicating silica gel for your filament dry box. The dimensions without feet are 155mm…
Video: https://youtu.be/IR4NWpqXP5c All of my previous PC case designs have been for ITX, but with every design I have been asked if it can work with ATX/microATX. This was mostly due to the maximum print size on many printers, so I…
I've used this 1lb, 3D printed, Antweight combat robot for the last year or so at local events. At our events, in the 3D printed class, all external parts, including the weapon, must be printed out of PLA, PLA+, PETG, TPU, ABS, or ASA. So…
Updated V2! I've finally uploaded some long overdue changes to make assembly easier and make the robot more durable than before! Some Patch notes: Updated design to use all M3 bolts and nuts included in the linked BOM. (no more fiddly…
As I wasn't able to find any working nozzle wiper for Core One L due to design changes made, I had to redesign my own one :) Designing and testing took quite a while and DOESN'T break air ventilation opener, so I'd be happy if you leave a…
Modular drawers, inspired by https://www.printables.com/model/72750-modular-organizer-drawers-alternative-design/files, but with all-new models of outer boxes and increased volume of drawers with a lot of changes and improvements. I tried…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors (this one) Shelly box for inline flex wire and wago 221 connectors Shelly box for 2x flex wires…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
I was looking for clips to secure the lids on some of my IKEA Samla boxes and came across many, including this one by Canislupus . I really liked the idea of the design but there were a couple of things I wanted to change so I remodelled…
Since I already had my favorite Battlebot (Bite Force), I wanted to make his rival Tombstone. Please be careful, the weapon blade is much larger and more dangerous on Tombstone that it is on Bite Force. Only spin it up in a testing box…
A 1L beer mug I designed for oktoberfest! I will print it in PET for transparancy but also since PET is food contact approved. Have not printed it yet though, designed by: https://www.mtb3d.com/ Print instructions Recomended to print with…
I have the new SodaStream 1L glass bottles (https://sodastream.at/products/spulmaschinenfeste-glasflasche-1-l-twinpack) and wanted a stand to dry them properly. It should have some kind of “organic” design to fit into my kitchen style.…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…
A cap for a one pound propane cylinder, used to keep it clean and protect the treads. It should be printed in TPU and without supports.
Replacement for the Lego Bar 1L Clip/Claw. Compatible with many Lego and building block parts and pieces. Looks like a wrench tool piece. Print in PLA with default settings. This is not Lego, only a part that is potentially compatible…
Break Check is a 1lb plastic combat robot design for the WPI plastic ant tournament. Required electronics: 2x repeat brushed mk2 3mm shaft 1x A2212 Brushless motor 10mm eva foam for the wheels (Or other material, Ive had good luck with…
EN: This is a print-in-place swivelling and rotating wall bracket compatible with the Xiaomi Aqara RTCGQ11LM motion sensor. The Xiaomi PIR attaches directly to the rotating base of this wall bracket, replacing the original battery cover.…
Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…
This is technically a remix of the gorgeous Mini Son of Whyachi by Pinfari13. I used their model as a guide for the correct scale/sizing of the main body. I have included the Fusion 360 file so you can edit it all you want. I have also…
It's just another watering can for smaller plants. There are quite some already, but unfortunately they all are rather small when it comes to the water volume. So I've created a bigger one, which holds about 1L. Print instructions Printed…
Die Teile sollten am Besten aus TPU gedruckt werden. Andere Materialien gehen zwar auch, aber es kann sein, dass sie beim Aufprall kaputt gehen. Die Teile werden mit einer 0,4 Nozzle und einer Wandstärke von 3 Wänden, ohne obere oder…
I designed this for my own use, I'm an C5 quadriplegic, so my hands and fingers are quite shittyshittybangbang, can't get grip of anythin heavy or slippery. This can be used to lift it with your thumb. Handle is slided down to it´s place.…
I lost my original measuring cup fro Xiaomi Rice Cooker one so I made a copy using my firend's PETG - recommended - due to food contact Feel free to modify and share - skechup file included
Made this for a heater that attaches to a Coleman 1lb propane tank. Without the stand, the slightest nudge would make it fall over. With the stand, it can be smacked around and will stay upright. Printed in PETG, no supports, 15% gyroid…
Add one liter volume for extra coffee beans Category: Kitchen & Dining
These plugs help to close the Core one L 3mm screw holes on the sides and on the upper edges of the printer :) Print settings: - 0.15 Structural (recommended otherwise won't fit) - PETG (but PLA should be fine as well) or TPU 85A. When…
I designed this case in Fusion 360 for an Aqara door sensor mainly to use it for projects where I use this sensor as a general purpose zigbee sensor and I prefer something a bit smaller. There are 2 versions, one with a hole and one…
Deutz F1L Knubbel Baujahr 1951 im Maßstab 1:10. Er ist zu 99% von mir konstruiert und das in tagelanger Arbeit. :) Benötigtes Zubehör siehe BOM OpenRc Tractor MK2.4. Die Ketten auf den Fotos kommen eventuell bald als Zubehör. Der…
I needed a cup holder for my water bottle on my 8040 sim rig, but all of the ones I could find online were sized for 1L Nalgene bottles, which are quite a bit narrower than my 1L insulated hydroflask bottle. This one has an internal…
Hubby needed a base for a 1lb Coleman propane bottle. I just did a little math and increase the original file in size by 1.36. Category: Outdoor & Garden
This is a 3D printed gasket designed specifically for the IKEA Samla 11L and 22L storage boxes. It helps improve dust and splash resistance by providing a flexible sealing layer between the box and lid. Two versions are included: Precut…
I was having trouble removing the supports off the bottom of the previous two models (original and then the strengthened) without breaking the “feet” off the bottom. Beefed ‘em up, and now they’re solid. Use either m3 x 10 or m3 x 12…
Simple pegboard holder for 1lb Harbor Freight Pittsburgh-branded dead-blow hammer. Since Harbor Freight tools are usually a crappy copy of some better tool manufacturer's design, it's very likely that other 1lb dead-blow hammers will fit…
Printed First Measure After 1lb Plastic Ant This is a 1lb Plastic Ant that was made for use in Combat Robotics. I have been developing this robot for around 2 years now. Before I retire from Robotics and the internet for 2 years, I want…
I started out printing some of the "The best one" clips from Thingiverse but while I really liked their haptics, I didn't like the fact that they just fall off and so when you open containers often, that is a bit annoying. I then found…
2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle. Print instructions Category: Food & Drink Summary 2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle.
A 3-part snapfit sprouting jar stand that holds the sprout jar at an optimal 30° angle. Lightweight and Ideal for proper drainage of sprouts. Easy to clean.
Sizing edit of @Draco_295340 's deburring tool case. Includes an inset debossed label. Recommended to print in PETG. Example photos are in PLA, debossed label filled in with sharpie (lol). If you do print in PLA, make sure to snap fit the…
I found this cap, which is pretty much perfect. https://www.thingiverse.com/thing:3164779 I also found this plug, which is cool, but not easily removable. https://www.printables.com/model/25391-1lb-propane-discharge-plug I decided to…
1:10 scale expedition canister 21L rozměry 43,8*34,5*18,9mm. Díra na přidělání veskrz 3.2mm .
This is an adapter to put a Nalgene bottle in a fairly standard car cupholder, Print should be in VASE mode for best results. I started out with a fairly generic design, then got intrigued by a YouTube video regarding using vase mode for…
Check out if your bed is good levelled. Print Settings Printer: 4Max Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100 Category: 3D Printing Tests
Updated model that adds +1 bottle. It is based on original model by @Marius and remix by @Kerensky
WARNING: Hold the center piece while fitting the top on. I was forcing the top on the third one I've printed and the center piece broke. I was holding the base when it happened. I may add some tolerance to the connection to make it…
What is it? Strap for holding the Nalgene 1L bottle cap. Why make it? Original broke. Latest revision Designed with FreeCAD 0.19 BOM To be printed out of flexible material Assembly Mount the small side on the bottle cap Mount the large…
This is a portable monitor made out of a screen from a broken netbook and a driver board I bought from eBay a few years ago. Print instructions The model of the netbook screen I used was N101L6-L0D and the particular driver board that I…
Mon 1er modèle avec Fusion 360
POZOR!!! jedná se o vršek na litrovou falšku! 0,7l má jiný závit
This we designed to prevent clogging and allow maximum airflow so there no more waiting for your resin to drain. The ribs in the funnel will prevent the resin soaked screen from laminating to the funnel wall and the funnel angle make sure…
Rigid bottle holder for a Micro Scooter, or any 33mm rod. Fits a 1L water bottle with 82mm diameter. The holes are designed to take M3 metal threaded inserts with 6mm depth. 4xM3 screws and inserts are required. Can be printed without…
11Lb Spool Adapter for smaller Lincoln Welders. Will probably fit other welders. Category: Tools
Insert for 1L wide-mouth Nalgene bottles to make it easier to drink. Includes a lip along the non-drinking edge of the insert to help with removal. Print from a food-safe filament. Print with default settings without supports. Version for…
Support de bouteille pour frigo permettant d'empiler deux bouteilles de 1L ou 75cL. Cette version consomme moins de filament que l'original tout en restant esthétique. La taille est ajustée pour la grande majorité de bouteilles en verres…
Holder for Harbor Freight 1lb dead blow hammer. Remixed the original pegboard model by removing pegs and adding holes to screw into wall. The holes are on the small side, you can enlarge with a drill if you have larger screws.
Halter für 1L Flaschen Isopropanol für das IKEA Skadis System. Gedruckt mit Sovol SV06 (Düse: 0,4mm / Schichtdicke: 0,2 mm) ##################################################### Holder for 1L bottles of isopropanol for the IKEA Skadis…
This is a collection of parts, some new some modified to install a Duet3D 1LC toolboard on a VzBot CNC Printhead on RatRig VCore3 printers. I have this setup up and running in my own printer, so it's confirmed to print and work well. I…
Als Ständer für die Ketchup-/Senf-Flaschen für den Kühlschrank, beim Grillen oder wo auch immer, sodass man nicht mehr schütteln muss. Die Tube hat leichtes Spiel, sodass sie leicht reingestellt und rausgenommen werden kann. Auch volle…
Remix to support a 1lb spool of solder from Kester. The only supports needed are for the axle -Fixed axle not being symmetrical Print Settings Printer: Voron Rafts: No Supports: Yes Resolution: 0.2mm Infill: 40% Filament: Sparta3D ABS+…
Simple clip-on box for Aqara door sensor to measure the impulses by REED sensor from gas meter. You have to unsolder the REED sensor and use extension cables to connect it back to the board. Works perfectly.
Did a little remixing to add a loop for my carabiner and reduce the stress of on the actual strap. Be sure to use flex, getting on the lid and bottle took a second but it eventually went on without modification.
EN: Grid for plant propagation box. Samla from Ikea is used as the box, size 11 l. The grid is placed at the bottom of the box and separates the plants, or their pots, above the water surface. The water under the plants serves to increase…
designed to fit a Coors or Miller aluminum bottle. I made a series of these for a fishing trip where everyone tended to misplace their beer. print in your team colors to keep all arguments centered around what's truly important. Obviously…
My chosen brand of mouthwash gets sticky and messy, leaking all over my bathroom cupboard. So I made this drip tray to keep things a bit more tidy. The design is supposed to follow the shape of the bottle itself, and the nubs inside are…
My 1L Isopropanol bottle shipped without spout, hence I designed one myself. You do not need to remove the spout when closing the bottle. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution:…
Intro A compact, modular Stevenson screen designed specifically for the Aqara WSDCGQ11LM square temperature & humidity sensor. The sensor installs into the Lower Part using a snap-in cradle with a latch (no screws or glue) and can be…
The Gridfinity bug is alive and thriving in my shop, so here is just another piece to the puzzle. Here are a smaller set of bins that together hold a generic brand 1lb dead blow hammer. The top side is 2x3, and for the bottom there are…
Measuring tool when you threw the wrapper out, 123 X 30 X 2mm. I printed in PLA, 2.0mm 20% infll it use 8.79g of filament.
Bracket for hanging the Aqara shock sensor on the door handle. This allows the alarm system to be extended to indicate that someone has grabbed the handle or that the door has been opened. The model is made in Fusion 360 and is…
MyQ decided to change their API to block people from controlling their garage and gate openers with any 3rd party apps. This broke my ability to open my gate through HomeKit or anything other than the MyQ app which tends to not work very…
This is my design for the EVA toolhead. This allows the Orbiter, the Magnum, Mosquito or whatever hotend you want. This mod is specifically made for the use of the Duet 1LC tool board for use with the 6HC Duet 3.
Wanted a mount for a Duet 1LC Toolhead board that did not require the large models/STLs of the steathburner to be customized. The left standoff needs a heatset like the original cable chain mount and the PCB mount heatsets need to be…
Two 1lbs coleman green canister holder. With two hook loops on the sides to hook and secure it or if you wanted to put multiples the loops should help secure them to each other with a bungee or some rope.
This is the mount I am currently using on my V-Core 3 with EVA3 carriage. I trimmed 3mm off the stand-offs; you may need shorter heat-set inserts.
This threaded adapter allows you to screw two empty/full 1L Old Spice shower gel bottles together. When your old bottle is almost empty, simply attach it upside down onto the new one. The remaining gel will slowly drain into the fresh…
A friend of mine was restoring an old Vespa. The battery is no longer required, so we decided to model a tool holder that looks like the original. I recycled the original filler caps, and added a plastic bar to simulate the original…
Upgrade part for RELIFE RL-601L quick release PCB fixture for improved versatility and stability in various soldering tasks. This easy upgrade increases the clamp height, enabling you to securely hold PCBs with taller components,…
Abrelatas is my 1lb combat robot, built in 2023 for the robot combat tournament at OSHWDem . It’s a 4-wheel drive vertical spinner, mostly 3D printed. It’s a fairly simple build, there’s no microcontroller onboard. Everything is directly…
Proof that 1 liter = 1 dm³ To demonstrate that 1 liter is equal to 1 cubic decimeter, we use two objects: A cube with sides measuring 1 decimeter (dm) . A beaker labeled with a capacity of 1 liter (1 L) . Step 1: Calculate the volume of…
MODEL DETAILS A mounting cover for the Duet 3 Toolboard v1.3 1LC , designed for use with the Hemera XS . We've provided a STEP file in case you need to make modifications to accommodate your own mounting/cooling solutions. 3x M3x8m screws…
Holder for Tupperware 1 liter bottle to let them dry. Print Settings Printer: Cetus3D Rafts: Doesn't Matter Supports: No Resolution: 0.3 mm Infill: 20 % Category: Kitchen & Dining
This cup holder panel mat was designed based on Ford part number 1L2Z-78046B76-AAA and should be compatible with the following vehicle models: Ford Edge: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 Lincoln MKX: 2007, 2008, 2009, 2010…
A 19-inch, 2-piece, modular rackmount for a Lenovo 1L PC. I have tested with a 720q and M80q This mount is part of a 19-inch modular rackmount system designed by @Mauker , you can mix and match the modules with other mounts. Take a look…
have a look at Ikea Samla 5L Miniature storage and transportation tray for 20/25/32/40mm bases by fidoriel | Download free STL model | PrusaPrinters You might have to glue it to the lid with hot glue.
Why i made this. I design this to organize my desk en easier access. Made it mountable with 4 metric M6 screws so i cloud hang it to my desk close to the printer. At the front there is a opening made so there is a better view for the…
A slip on hanger for 1 Liter Smart Water bottles. Used for hanging hummingbird feeders, chicken waterers, or other bottle attachments. The tight fit makes glue optional, but it is recommended. Printed using PETG with supports.
Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. Compatible with CURVER INFINITY 11L and 17L boxes (without lids) Box dimensions: L35,6 x B26,6mm Remixed from IKEA Trofast rail system. LONGSIDE and NO LONGSIDE…
1lb. Solder Spool Holder About This holds a 1lb spool of solder. Specifically made to fit product: KESTER SOLDER 24-6337-0027 Solder Wire, 63/37 SN/PB, 183°C, 1LB but should fit most spools. Requires two 608 bearings Printing tips: parts…
0.1l Jagermeister emergency box. The model is inspired by a smaller version of the box: https://www.printables.com/pl/model/484392-emergency-jaegermeister-in-a-manual-call-point by der-pw. Enjoy!
I made a Duet 3D Toolboard 1LC holder to connect to the EVA3 system and add stability. I added an arm that screws directly into the Orbiter screw, just use a longer M3x30 screw to connect the orbiter to the board back. Apologies if this…
This is a remix of a perfectly fine model I found that just wasn't big enough since my IPA bottle was 1 Liter (33.8 oz). I removed “blocked out” the zip tie holes since I was gonna use glue and screws but I also posted a model that still…
![Deburring Tool Case (AFA Tooling B01L2XR4P2) [Remix]](https://media.printables.com/media/prints/656236/images/5172135_127ee4eb-1af2-4614-827d-127d6f3cacaf_be530f00-3209-4ede-aa54-90d49423e53a/img_2219.jpg)
