Counting matching models…
Here's my contribution to all the quarantine creativity: an approximately life-sized C-20A Rifle used by the Starcraft character Nova. Originally I ripped it from an in-game asset, and then added detail from there based off of numerous…
This model is specifically for the DELL WD19, WD22, K20A USB-C Thunderbolt Docking Stations (all have the same 9cm deep x 2.9cm height case) and allows the dock to be clamped to the edge of a desk and hide all the associated cables. I…
13S4P 21700 - 48V 20ah Battery Tray - compatible with 2P Strips
AIM-120A A scale model of the AIM-120A split into logical parts for easy printing Print instructions and assembly Print the different parts in your desired colors and glue them together. No need for supports. Dimensions Length: 458 mm…
This a simple enclosure for a popular powerful dc-dc step down converter from Aliexpress. Requires four M3 screws that go directly into plastic. It has ventilation holes around the heatsinks. Printed with ABS.
This is designed to work with flexible TPU filament only. Recommend printing with 4 perimeter walls, 4 bottom and top layers, and 13% rectilinear infill. No supports required. Use a thin-tip Sharpie to darken the letters after printing.…
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
Simple junction box for reolink cameras RLC-1224A and RLC-520A (with included adapter). Square hole at the bottom easily fits crimped rj45 connectors so you can prepare them before installation of the junction box. I've attached the box…
There were two motivations for creating this model. One of them was a need to make my switchboard cabinet look nicer and the second one was just fun learning onShape, finding ways of efficient modeling. Pretty challenging because of…
Vacuum adapter for Bosch PEX 220A sander. Fits a vacuum hose with tapered 31mm outside diameter. (My vacuum hose is 30mm at the end but 31.5mm after about 30mm) Note: Inner diameter for hose connection part is 31.5mm with a length of…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
Gravity-Fed Battery Dispenser (20x AA & 20x AAA) This is an extended version of the popular Multi Battery Dispenser. It is designed for those who need to store a larger cache of batteries while maintaining a slim, functional profile. This…
Couldn't find one so designed my own. bom: 2x printed parts 4x woodscrew
A mount box to hide the cables that come out of the RLC camera. This one is made for my RLC 820A but it will probably fit other models as well. You will need some M3 heat-set inserts to put into the holes. Alternatively just edit the…
This model allows you to place your notebook on top of the docking station. Fits perfectly on the Dell K20A, maybe other. All ports are available and the air vents of the docking station as well as of the notebook are completely free. The…
V2 Updated to simplify and strengthen the design similar to the remix posted. Print with the "legs" on plate. I had an old Tripp-lite 6 foot tall, 20A 24 port NEMA 5-15 server power strip designed for vertical installation in server…
Box with DIN mount for 300W 20A DC-DC Buck Converter Step Down Module
Designed this VFD KeyPad Holder for the YL620 available on AliExpress. This fits in the same size hole as the original part, but the dimensions have been updated for the keypad. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
Designed specifically for seamless integration of the Reolink RLC-520A camera with both indoor and outdoor round junction boxes. This adapter facilitates the use of conduit systems or alternate mounting solutions, providing flexibility in…
It is preferable to print with support for better result.
Print two of these laying on the side, get four countersunk screws (I used 4mm ones, 3.5mm would have been a better fit) suitable for the material you're mounting it to, drill if needed, screw it in. Useful if you want the amplifier…
Die Ersatzteile von Husquarna sind sehr teuer, deshalb habe ich ein Vorderrad für den Automower 220AC konstruiert. Druck in PETG mit 0,2mm Layer. Spare parts from Husquarna are expensive, so I designed a spare front wheel for the…
I recently ordered this electronic load from Aliexpress ( 200V 150W Adjustable Constant Current Electronic Load Battery USB Tester DC 12V 24V Lead-acid lithium Discharge Capacity Meter ), and I was surprised there is no available case for…
Small wire holders - 20 mm wide by 5 mm thick 100% infill 0.6 nozzle 0.30 layer
Wandhalter für meinen Pedelec Akku von Hailong (HAILONG-MAX 48V 20AH). Die Gehäuse der Akkus werden gerne mal vom Hersteller verändert, also bitte vor dem Druck prüfen ob es überhaupt für eure Variante passt. Für etwaige Anpassungen habe…
A cap for Nikon EN-EL20a batteries to protect the contacts.
35mm DIN mount for this 20A 300W buck converter that I use for 12v fans and LED strip. The mount should be seated on a Voron DIN clip (also available in this thing ). I've included two mounts, one that orients the bucker converter along…
Vacuum adapter for Bosch PEX 220A sander. Fits a vacuum hose of festool cleantec (D27/36 bayonet) I used screws to connect to the original sander dust port, as the clip solutions (even the original bosch accessories) don't really stay…
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
Simple clamp designed specifically for ParkSide PDSLG 20 A1 double fast charging station for x20V Team powepacks. Fits perfectly and tighly and also cover the powercord to prevent dmg. .20 speed, PLA… i think the PETG would be more…
*****Bioenno appears to vary the actual size of the battery sometimes. This skeleton fits my battery fine but may need to be adjusted in your slicer to fit the dimensions of your battery.***** When I operate my amateur radio away from…
The shelly pro 3em smartmeter comes with 3 120A current clamps, which can be hard to fit in case you appreciate a tidy cabinet arrangement. This is why I created this DIN-rail mount. It's not overly space efficient and requires some…
I add to the download, if someone needs my project of bms-a Ant 7-16s 320A modification, all files are in. The package contains all the elements from the bms and LCD modifications, there are also heat sink files if someone has the option…
The goal was to keep the original placement of the receiver box and provides an addition 10mm clearance for the larger 4274 motor. BOM m3x20 2 m3x30 2 5x3mm foam m3 inserts 6 Print Support: Yes Material: PLA
A case for a 20A 300W CC CV Step Down Module regulator with openings for heat sinks and access holes for voltage and current adjustments. Tapered press fit cover. A comment indicated that their board had slightly different screw hole…
Quick and simple modification. Love this design, but needed to mount it to a cabinet door permanently, so I just added two screw-mount tabs to the top and bottom of the shroud base. Not particularly refined, but it does the job and is…
LiFePo4 120Ah battery contact protector 21mm - 1mm clip x 181mm x 14mm inter size
Must print two to properly mount to surface, use screws to screw through mount and into the wall.
Hello This is a USB-C stand for a Dell USB-C docking station with a Dell Latitude 5450 laptop. I made another version for Latitude 7400, specified on file name. I cannot assure that this design fit with other Dell laptop. The stand avoid…
Print this twice to under-desk mount amp, the screw holes are 3mm diameter, and 5mm deep. This won't work for BT20A Pro as the dimensions aren't the same.
Enclosure for protection. Used EMI Filter schaffner 20A. Printed with 3 perimeters.
Battery Mounts for securing a CHINS LiFePO4 12V 20AH Lithium Battery vertically. I originally made brackets to hold the battery on its side, but also needed to hold the battery vertically and that's where this model came from. I used 2 of…
This is a remix of psyvision's Rat Rig V-Core 3 IEC Surface Mount Adapter that has been modified for C20 receptacles. Standard C13-C15 connectors are only rated for up to 15A. The cheaper IEC combo packs found on Amazon (for which the…
I started building myself a hex panel led lamp, and needed a clean way of hiding the ugly PSU and WLED board. A case for a 5V 20A HoneyWell-style PSU off AliExpress and a spot for a NodeMCU ESP32 on a prototype board. Attach lid to case…
My dryer stopped drying after four years. After cleaning it, I decided to do something about it so I wouldn't have to go through this again. I couldn't find anything interesting in the pre-made models, so I designed my own attachment for…
BMS case for 120A JBD or Overkill BMS BMS mounts from the bottom after replacing original 3mm diameter screws with longer screws. Category: Automotive
I am upgrading my Ortur Laser Master 2 Pro with a LM3-20A 20W laser module. The new module is too large. This causes it to bump into the frame before hitting the limit switch. I created this plunger that slips onto the gantry so it bumps…
Simply download and print. Redesigned in Bambu Lab Studio when I printed it on my X1C in BBL PLA.
LiFePO4 LiitoKala 3.2V 20Ah - MODELLiFePO4 LiitoKala 3.2V 20Ah - MODEL
Handle for Motobatt 34ah and 20ah. Print 2 of these parts for a battery handle. 6mm rope and 9mm Cable tie required.
This is a replacement antenna for the Sony AIBO ERS 220/ 220a. The antenna is push fit. Print with supports ‘on build plate’ I recommend using a textured build plate so both sides look the same. Or use a smooth build plate and use the…
Used 4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery4PCS LiitoKala 3.2V 20Ah/25Ah Lifepo4 Battery LiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection PlateLiitoKala 4S 12V 100A BMS LiFePo4 Battery Protection Plate
I followed the dimensions in the picture, but they are a little off. just use M4 or M3 screws. M5's for the 2020 part
Building a DIY battery bank requires precision and safety. These spacers are designed to securely hold 3.2V 120Ah LiFePO4 cells , ensuring they remain perfectly aligned for busbar installation while providing structural integrity to your…
Modelo defectuoso pero suficente para placa amplificadora de audifonos acompañada por los componestes disponibles en tienda local de electronica y otros elementos aleatorios a la mano Considerar solo como un modelo base para hacer sus…
LaskaKit ESPlan ESP32 LAN8720A MAX485 PoE v1.0/2.1 3D model vývojové desky LaskaKit ESPlan ESP32 LAN8720A MAX485 PoE v1.0/2.1 Stránka produktu: https://www.laskakit.cz/laskakit-esplan-esp32-lan8720a-max485-poe/ Github:…
1. 400W power supply for disc grinder. Voltage adjustment up to 20V and current adjustment up to 20A. Converted from a regular power supply. Added terminals, connectors, fan. power supply -…
The bracket is designed to hold USB sound interface Behringer U-Phoria UMC202HD and a power amp Fosi Audio BT20A Pro. The devices slide in the bracket.
Replacement knobs for the Array 3720A or electronic loads with similar terminals.
CZ: Potřeboval jsem krytku s chlazením na jeden svůj zdroj, tak jsem jej přeměřil a v tinkercadu načrtnul přibližný vzhled. Toto nejspíš není finální výtvor, ale už jsem skoro tam. Jeden ventilátor se mi zdál málo a nemám rád asymetrické…
Mounts stock MAF to podfilter
Simple part to repair water kettle lid button
These are identical so you'll want to print 2. I used PLA, only because that was already in the printer. 3M VHB tape on the mounting surface and 4 M3 thermal nut inserts and you are ready to go!
This is a flashing adapter for the HK 20/30amp ubec ESC. This will give you a clothes pin style clip to make contact with the contacts on the board. I am not going to go into details on flashing the ESC as there are already numerous sites…
es una caja que hice para meter una placa elctronica elevador de tension de 5 voltios entrada y da una salida hasta 90 voltios con 20 amperios, todo es regulable el voltaje de salida y los amperios y para ello hay 3 potenciometros que se…
Gridfinity holders for Angled drivers Wera 920A 4x4 and 8x8 . There is a plate for a combo holder (2x4x3)and for individual holders (1x4x3 and 1x3x3). These are designed to have a stacking lip and be able to stack with the tools in them.…
Great for van life, RV or off-grid battery setups. Mounts to any flat surface via two screws or double sided tape. Design includes easy access to all controls and cutouts to keep the charger cool. Models are print oriented. I recommend…
Designed to fit this 20A receptacle https://www.digikey.com/en/products/detail/schurter-inc/EF11-2561-0010-01/642383 Mounted with M3x6 button head cap screws https://amzn.to/44WXMar
Replecement for the battery_Clip which is fixed with hose-clamps and may damage the drysuit. The battery-tank is an Yellow-Diving 6Ah LiPo tank, Yellow-Diving 20Ah LiPo tank and Lightmonkey 10Ah LiPo tank. Clips for greater tanks are…
Needed this for a project hopefully someone else will find it useful. Holes are sized for M3 screws. Here's a link to the exact block I used ( https://smile.amazon.com/gp/product/B091F9Y399/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1…
This is a case I created for the SainSmart BT to Serial Port module. This was printed on a Tiko in Gem PLA Category: Electronics
Lever Switch for Vintage Luxman Amplifiers. Model M-120A C-120A L-58A L-45A Printed with ColorFabb Steelfill Metal Filament Print Settings Printer Brand: Anycubic Printer: Elegoo Centauri Carbon Supports: Yes Resolution: 0.1 Filament:…
Handle for multifunction calibrator FLUKE 5700A / 5720A. Probably compatible with other models such as 5080A. Recommended material for printing - PETG, ABS.
This is an update to the original model. My Dell Precision laptop from work would not fit in the slot meant for the laptop. It was too thick. So, I expanded that slot by 10mm to allow for larger laptops to work in this stand. It works…
Simple box to hold M6020 PWM speed controller with an input and output XT60 connectors. Prints without supports, the bottom of the box should be facing up. Requires 8-10mm M4 bolts & nuts for the top plate, 8-10mm M3 bolts & nuts for the…
100% infill Supports Enabled Hardware: 5/16 X 33.5" hex bolt, 5/16 Nylock Nut, 2 8mm Flange Ball Bearings
Created with Fusion for FRC 2026 Team 5137 Iron Kodiaks. Intent of the model is to allow for a flat base plate that can be used for 3M adhesive velcro or zip-ties, as well as having room for bolts to thread into a breaker shroud .…
Print with 100% infill Enable supports Reuse original Powermatic screws + M3 X 30 for hinge + 3X12mm Magnet
Print on side with tree supports enabled
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
Print with 100% infill Enable supports Reuse original Powermatic screws + M3 X 30 for hinge + 3X12mm Magnet
Simple part to repair water kettle lid button
Created with Fusion for FRC 2026 Team 5137 Iron Kodiaks. Intent of the model is to allow for a flat base plate that can be used for 3M adhesive velcro or zip-ties, as well as having room for bolts to thread into a breaker shroud .…
Will work with Bambu and other large bed printers. Not compatible with Ender3 printers. This is a DIY battery enclosure kit, for the DIY battery building community. I had originally made a kit using 280ah-sized cell for my RV, it worked…
Privacy cover for the RLC-520A. Not sure if it also fits the RLC-520.
It a model for change famaly of accumulator from one-power P.I.T to 18v LXT MAKITA for P.I.T. PHM20H-120A
A mount box to drop the the RLC camera below the house fascia board to avoid IR glare into the camera lens. You'll obviously need longer screws for mounting. Also made the walls thicker to reduce risk of vagrants breaking cameras from…
This power supply can be purchased from the following link . This model was created using manual measurement. Mounting points included in model are accurate (see included photo).
Overview: This is a power supply cover/enclosure to contain he wiring, electronics, and input/output connectors for a 24V AC to DC power supply. It allows me to safely convert electricity from the wall (230v) to 24v DC power for all of my…
Tarmo 4 steering link (20A) mod to suit store bought rod ends / rose eyes Print Settings Printer: Artillery X1 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: ESUN PLA+ Category: R/C Vehicles
Power supply cover for S-240-12, it's was from my ANET A8 printer but this power is popular. I added a cheap voltmeter interface for showing the voltage like other design out there on the 30a. Hope you like it! Print Settings Printer…
Here's a little shelf I put together for my Fosi Bluetooth amp. I printed it with PLA.
PSU cover for 12v 20a PSUs Compatible with Prusa MK2 Print instructions Category: 3D Printer Parts Summary PSU cover for 12v 20a PSUs Compatible with Prusa MK2
just a small quick Skadis holder for the Tamiya X20A/ Lacquer Thinner in 250ml canisters. Print in any material you want, i advise for PETG since that is the material i used. Since the Thinner bottles aren't that heavy PLA should also…
Stand for motion detector. With the stand you can align the motion sensor exactly to your needs. Print with 15% infill. No support You can add the motion detector in both orentations.
