P
PrintablesKarol T
Qidi plus 4 - Display tilt adapter (20deg)
Adapter to increase the display angle by 20deg
- Downloads
- 644
- Likes
- 94
- Rating
- 4.9
Search results: 20d
Counting matching models…
P
Printablesquibeck
Mini Whistle GUARANTEED +120dB, ~1g – Tested with dB App
This Mini Whistle weighs in at just ~1 gram yet delivers a genuinely deafening 115 dB , verified using a decibel measuring app (as shown in the test screenshot). Small enough to disappear in your pocket or on a keyring, it's a functional…
- Downloads
- 425
- Likes
- 31
- Rating
- 5
P
PrintablesGrungus
RTL8720DN BW16 Case & Lid
Simple case & snap-on lid for the RTL8720DN BW16 board. I couldn't find any other models available for this board, so I made one! The snap-on lid press fits snugly, and has supports to help hold the board in place. Pins are exposed on the…
- Downloads
- 254
- Likes
- 11
- Rating
- 0
P
Printables1D_Design
Rough Country LED Rock Light 20Deg Roof Rack Bracket
This bracket will mount Rough Country LED Rock Light on the roof rack with a 20-degree angle. work perfectly as a camping light. Required hardware : M4 Bolt (12mm or longer ) M4 Nut M6 Bolt and nut (depend on your setup) Category:…
- Downloads
- 232
- Likes
- 59
- Rating
- 5
P
PrintablesGasket
Alienware Monitor Webcam Mount (AW3420DW)
Due to its odd triangular profile, a webcam will not sit well atop the Alienware AW3420DW. This is a simple mount that provides a mounting surface. This was designed to fit the mount used by the logitech brio, 920, 922, 925, 930 and any…
- Downloads
- 184
- Likes
- 18
- Rating
- 0
P
Printablesfrogstompr
Shure 520DX bullet microphone holder remix
Shure 520DX bullet harmonica microphone holder with angled stand attachment point. Holds the mic at a comfortable angle for guitarists who need the mic stand out of their way. Remixed from https://www.thingiverse.com/thing:26813 Category:…
- Downloads
- 175
- Likes
- 13
- Rating
- 0
P
PrintablesRegurgitatingVampire
GK420d & GX420d Right Bearing (Roller clip)
Right bearing roller clip for GK420d & GX420d thermal printers. The original was too tight for me so I widened the hole a bit. Original can be found here: https://www.thingiverse.com/thing:3689058 If you're looking for the left clip, you…
- Downloads
- 173
- Likes
- 4
- Rating
- 5
P
PrintablesSamir Chaman
FRC 20DP Gear Tooth Counter
Allows you to count the number of teeth in a 20DP gear. It can count from 12 to 84 teeth and includes a gear rack to quickly check if the gear you are trying to measure is compatible with the tool.
- Downloads
- 171
- Likes
- 28
- Rating
- 4
P
PrintablesVargaMark
Keyboard wall mount - curved with 20deg
I needed a keyboard holder for my secondary keyboard on my cockpit. After the first try I shifted it by 20deg towards me. It's designed to be mounted 25cm-s from each other (measured from the right side of both pieces). It's designed for…
- Downloads
- 140
- Likes
- 24
- Rating
- 5
P
PrintablesRegurgitatingVampire
GK420d & GX420d Left Bearing (Roller clip)
Left bearing roller clip for GK420d & GX420d thermal printers. Couldn't find a clip for the left side of the roller so I converted the existing right clip into a left. While the original listed here;…
- Downloads
- 133
- Likes
- 3
- Rating
- 0
P
PrintablesSNC3D
Nissan CA18DET SR20DET MAF to Apexi
Glue your o ring out of 3mm o-ring cord and asemmble your maf adapter of choice. If i see that stuff on etsy or ebay i am going to mount my old rod bearings in your motor or bent your rocker arms.
- Downloads
- 130
- Likes
- 19
- Rating
- 0
P
Printablesultimate_hecker
FRC 20DP Gears - 1/2" HEX Bore
20DP Gears in all standard sizes with enough additional tolerance to be printable on most common 3D-Printers. Although these gears are only recommended for prototyping, they can be used for in-season robot build in areas of light/medium…
- Downloads
- 114
- Likes
- 11
- Rating
- 0
P
PrintablesTRL3dDesigns
SR20det to VQ35 coil pack conversion
Here's SR20DET to VQ35DE (350Z) Coil Pack Conversion Brackets – Nylon Carbon Fiber Easily upgrade your SR20DET ignition system with these custom 3D-printed brackets that allow you to run **VQ35DE (350Z)** coil packs. A lightweight,…
- Downloads
- 106
- Likes
- 1
- Rating
- 0
P
PrintablesPrintCore
120db Whistle V1
This is a 120db whistle! ⚠ Use outside only. This whistle uses only 6 grams of filament and takes only 22mins! I used this custom filament maker for this whistle:…
- Downloads
- 98
- Likes
- 11
- Rating
- 0
P
PrintablesPeter
Microphoneholder/mount for Shure 520DX
Holds the Bicyclelight shape of the 520DX so it can be mounted on a regular microphone stand.
- Downloads
- 90
- Likes
- 4
- Rating
- 0
P
PrintablesCristi
Portable enclosure for Sonoff POWR320D Switch (for EV charging)
I created a custom case for a Sonoff switch to monitor energy consumption while charging an electric vehicle. It's particularly useful for charging at unmetered outlets or at hotels/guesthouses without dedicated EV charging stations, as…
- Downloads
- 74
- Likes
- 15
- Rating
- 5
P
Printablesjimmyapage
SR20DET Yaris Coil Pack Adaption brackets
Fits all SR20 Heads, although later S15 heads had different sized holes so the Yaris coils don't seat as well. Please print out of carbon fiber nylon or ABS due to temperatures in head. 1 version has cable ties 1 not, i printed 2 of each…
- Downloads
- 71
- Likes
- 6
- Rating
- 0
P
Printableskillowatt
120deg tape measure noaa satellite antenna
Designed to be a simple and portable 120deg antenna for noaa satellite use. This antenna uses tape measure elements and should fit any pipe or stick smaller than 33.5mm (1 in pvc) by using longer screws. Category: Electronics
- Downloads
- 63
- Likes
- 10
- Rating
- 5
P
PrintablesSurfalex2000
Cleaning with cold pull->220degrees->235degrees->250degrees->260degrees->100degrees--> PULL
IMPORTANT: You need to add this to Line 20 of the G-code: M302 S85 This allows the Printer to do the Cold Pull. Be aware, that this is normally deactivated due to Security, since a Cold pull is pretty hard on the Printer, and should only…
- Downloads
- 55
- Likes
- 17
- Rating
- 0
P
PrintablesNordfpv
Baby Nazgul 20Degree camera
The iFlight baby Nazgul (both 63 and 73) has a very aggressive camera angle, around 40 degree. I designed a lower angle for this drone which should be closer to 25 degree. It fit both drones.
- Downloads
- 52
- Likes
- 2
- Rating
- 0
P
PrintablesJRosello
Logitech C920 Spacer for DellS3220DGF Curved Monitor
Logitech C920 Spacer for DellS3220DGF Curved Monitor
- Downloads
- 50
- Likes
- 4
- Rating
- 0
P
PrintablesMeowsketeer
Top lid/cover for dehumidifyer "Comfee MDDF-20DEN3"
This is a simple lid/cover for the opening at the top of the dehumidifyer to prevent dust and small items falling into the machine. The outer dimensions are 270x95mm, so you need a bigger machine than the common 220x220mm printers to…
- Downloads
- 49
- Likes
- 15
- Rating
- 0
P
PrintablesDotNetWorker
Replacement Bezel for Zebra TLP3842 / GC420d / LP2844 Thermal Label Printers – Front Cover Spare Part
## Full Description Missing the front bezel on your Zebra TLP3842, GC420d, or LP2844 thermal label printer? This 3D-printed replacement bezel / front cover stops labels from wrapping round the roller, restores a tidy look, and keeps your…
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesWilko
Sleeve for 720DGREE thermos (broken)
It looks like my thermos from 720dgree ( https://goo.gl/Hr2Gih ) is broken. It doesn't keep my beloved coffee warm for a longer time and the outside of the thermos is getting more than warm. It's still fine for the morning coffe... I…
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesSanguineDrone
AwithZ P90C/ P120D Spot Welders Angle Stand
Angle base for the AwithZ P90C/ P120D, keeps leads closer to work, and makes it much easier to see the screen and access settings. Based on a similar model from diy500amp.com Included is a 25degree angle (my preference), fusion360 design…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
Printableston4eff
Aixun T420D stand to soldering station fixing clip
Had to make these small fixing clips to securely lock the soldering station stand to the station itself. Without these it very easy slips out of place if I try to change the hot tip. FreeCAD project is also attached. Printed with PETG,…
- Downloads
- 35
- Likes
- 7
- Rating
- 0
P
PrintablesMáté
Lexus IS220d gauge cluster needle cover
If you break yours (which is pretty easy), or you want to customize it you can replace it with this easy and quick print. It's designed to be printed with a 0.3 mm nozzle.
- Downloads
- 30
- Likes
- 1
- Rating
- 0
P
PrintablesMax EvoX
FA20DIT Intake Walnut Cover
It's was tested on a FA20DIT from a 2018 Subaru WRX. We (My buddy and I) used a shopvac to suck the walnut out and the centre hole is for your blowing nozzle. Worked pretty great but we had to trim a bit of it out. This is my very first…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesPrzemysław Chrostek
Pentax K10D/K20D battery protector (NP-700)
Simple protector for Pentax K10D/K20D battery terminals. Model of battery of mine is NP-400. I'm also uploading FreeCAD project file. If you are brave enough, feel free to modify it :)
- Downloads
- 24
- Likes
- 1
- Rating
- 5
P
PrintablesBriarLee
Zebra GX420D Stand
Stand for Zebra label printer, allows for under storage of small items
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesAnthony
Zebra GK420D Spool adapter for Royal Mail P6709 thermal label rolls
A spool adapter to use the Royal Mail P6709 thermal labels inside the Zebra GK420D thermal printer machine. May work on similar machines/labels. Have a great day.
- Downloads
- 22
- Likes
- 4
- Rating
- 0
P
PrintablesStudio Mechanik
Hexagonal Corner Connector x2 120deg for PVC Tubing
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
- Downloads
- 22
- Likes
- 8
- Rating
- 0
P
PrintablesIzzyBoop
![Demibot 20deg Gopro Hero8 Mount [Certified Bando Proof]](https://media.printables.com/media/prints/400332/images/3336422_c3920e00-3c50-4ffd-815b-2049fcb3f0cd/20230216_110837.jpg)
Demibot 20deg Gopro Hero8 Mount [Certified Bando Proof]
Hero 8 black mount for the Demibot with some durability improvements
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesmonkPL
20deg IFlight Nazgul GoPro Session, RunCam, Caddx Orca mount TPU
This is a GoPro session (4/5), RunCam Orange 5 or Caddx Orca mount out of TPU for IFlight Nazgul. This is remix from https://www.thingiverse.com/thing:3103320 - correct hole spacing added Print Settings Printer Brand: Creality Printer:…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesJan Bic
3030 120degrees (or 45) connection stiffer
I was quite surprised how few of this 120 degrees connectors is available to download, for 3030 it was none, so here one is :) I printed it from pla (as i think it is not that bendable as petg), 0,25 structural, 5 perimeters 5 top and…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesRobert Wagner
Shaft seal assembly tool, BMW F11, N47D20D engine, front side
Der Kurbelwellendichtring beim N47D20D Motor hat keinen axialen Sitz. Der Wellendichtring könnte somit zu tief oder zu weit herausragen installiert werden. Im Extremfall könnte er nach innen in das Kurbelgehäuse gelangen. Mit diesem…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesPeterLandin
ZMR 250 Tarot 600tvl 20degree cam mount
UPDATE: I just received a new ZMR frame and noticed that the pillars was 2.5mm taller than the once I had before. I redesigned the mount and uploaded a new .STL-file named LONGERPILLERS in the end for the taller once.. UPDATE: Final…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesAaron Duce
Zebra GK420d front bezel cover plate with access to feed button
Printed on Mini+, 0.20mm speed profile. Sticks direct in place over the original control panel. Attach with double sided tape or nanotape (search Amazon) for easy removal later down the line. Created in Fusion 360.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesStudio Mechanik
Hexagonal Corner Connector x4 120deg double for PVC Tubing
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
- Downloads
- 14
- Likes
- 7
- Rating
- 0
P
PrintablesDEAth
Wall mount for UNI-T UT320D and UNI-T UT373
Wall mount for UNI-T UT320D and UNI-T UT373
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesDr.Enchanted
Drone Back Up Camera for 32mm Standoffs with 120Degrees of Movement
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
Printablesthisiskeithb
Opto 22 Z120D10 SSR/2-Hole Mount for Tevo Tornado Standalone Mod
I remixed this for an Opto 22 Z120D10 (140V) or Z240D10-17 (280V) SSR, but it should fit most two-hole mount relays. Having said that, your relay will likely need to be mounted to something other than plastic because of heat and probably…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printablesrahix
720dgree 0.5L Bottle Wall Mount
About If you, like me, need fast and convenient access to a bottle of water from time to time, this is a wall mount for a 720dgree 0.5L (500 mL) water bottle. Other bottles with a diameter of ~65mm should work as well. Additional Parts…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablespyr02k1
Voron V2.4 Hinge, M3/3mm 120deg hinge (Remix of quattroerik design)
This part is associated with Voron purely because it came from the Voron Mods Database, with the original by quattroerik. I was looking for a pretty much “print and use” style hinge for 2020 extrusion and this one was as close to perfect…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesMind2MatterPrinting
Adapter for BlenderBottle ProStak and 720Degree Shakers and Expansions
These are 2 Adapters for connecting BlenderBottle ProStak Shakers or Extensions with 720Dregree Shakers and Extensions and and vice versa. Print Option: PLA 100% Infill If you have any questions, feel free to ask.
- Downloads
- 8
- Likes
- 3
- Rating
- 0
P
PrintablesRoderiq
AwithZ P90C / P120D Angle Stand – Modular Accessories Remix
AwithZ P90C / P120D Angle Stand – Modular Accessories Remix This is my remix of the original AwithZ P90C / P120D Spot Welder Angle Stand . I really liked the original angled stand design, but wanted to add some practical storage and…
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesSimple3D
Coachmen Nova 20d Protective Switch Cover
A friend has a Coachmen Nova 20d on a 2024 Ram Promaster chassis. The water pump switch easily gets knocked. He asked if I could make a protective switch cover. Things I used: PETG-CF for high temp and matt finish (…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesOSADKTDA
120dB Loud Pocket Whistle | EDC Keychain
Mini emergency pocket whistle - extremely loud 120dB+ Small. Loud. Only 1.8g. The Mini Mighty is a sub-2-gram powerhouse engineered for maximum output. Ultra-lightweight profile that screams at 120dB+ . It’s designed to live on your key…
- Downloads
- 4
- Likes
- 2
- Rating
- 0
P
PrintablesSantiago Roel
0103/39.8A Inserto cambiable raya 8x20d plastico FV modelo Libby
Modelo del inserto plástico para la grifería Libby 0103/39.8A que diseñe para reemplazar. Model of the plastic insert for the Libby 0103/39.8A faucet that I designed as a replacement.
- Downloads
- 0
- Likes
- 0
- Rating
- 0
P
Printables
Hexagonal Corner Connector x2 120deg for PVC Tubing
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
P
Printables
Hexagonal Corner Connector x4 120deg double for PVC Tubing
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
P
Printables
Drone Back Up Camera for 32mm Standoffs with 120Degrees of Movement
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
P
Printables
Cable box for Sonoff POW316D/POW320D
Introduction Provides a cable box at the bottom of a Sonoff TH/POW 16/20A smart relay to safely enclose cable connections when used outside of a distribution box, such as wall mounting it independently. Without the cable box, mains…
P
Printables
Dji O4 lite canopy : 20deg tilt + crest + antenna holder
20deg tilt + crest + antenna holder
P
Printables
Artillery Sidewinder x4 plus s1 mounting bracket XD4020D24M
https://temu.to/k/e4gg1j4kd3n 8010 24V FAN The mounting bracket for the motherboard cooling fan allows the installation of an 8010 fan instead of a 4020, using the original 20 mm screws. Printed in PETG. please comment your opinions on…
P
Printables
Wyze Doorbell V2 Mount - 20deg Down
My doorbell is mounted to my siding (8-10deg angle). I wanted my doorbell camera to look down at my porch more to keep any eye on packages and reduce the overall blind spot. I decided to make this extreme 20deg angle mount because a 10deg…
P
PrintablesJC
Hirsch / Identiv Card Reader 1 Inch Back Plate (CCD version-9t_20deg)
Hirsch / Identiv Card Reader 1 Inch Back Plate ( CCD version-9t_20deg ) Had an instance where I needed to mount on a concrete surface nearly as flush as possible. This version has a 20 degree upward to make viewing and using the reader…
- Likes
- 1
- Rating
- 0
P
Printables
Blank 20d Snap Together Die
This is a remix of the Snap Together d20 die by Strange_Meadowlark. I removed all of the numbers and rearranged the individual pieces into a more square layout. You can easily incorporate your own designs, numbers, symbols, etc... onto…
P
Printables
GENELEC 8020D Speaker Stand
This is a sturdy GENELEC speaker table stand which I designed for my pair of 8020D Studio Monitors. Other Genelec speakers of the same size range should easily fit too (provided they have the rubber foot on). Simply place your speaker…
P
Printables
Zebra GK 420d Power Supply Holder (under desk)
Simple Holder for the Power supply Infill: 100%
P
Printables
Hytais TS20D Cap
A cap for the TS20D Pen Meter to prevent poking the sharp probe through your service bag. Prints with not supports and can use an infill of 20% to save filament. The cover has four bumps that engage the end of the meter to hold to the…
P
Printables
Xenomorphic 20D
Two Version of 20d Xenomorphic Dice. Please align with point (tip) pointing up on plate and use bed before slicing. Use supports on build plate only and turn the support angle down to 10.
P
Printables
Wanptek KPS3020D front add-on
I really like this bench power supply from Wanptek. One strange sting about it is a DC output placement at the back. I have designed add-on that is screwed in place of the two front rubber feet. The feet are repositioned on the add-on…
P
Printables
Protek25 RunCam flat mount 20d
Adding version v2 - reinforced bead mount Another version of RunCam 5 Orange mount for Iflight Protek25. This is flat mount - 20 deg. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:**…