150 models
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
Recreation of 720s rim as close as posible for LEGO technic enthusiasts. Compatible with tyre 81.6 x 44 ZR Printing options: Printing outter and inner part separately. Outter (part with spokes) print with supports Printing the combined…
This is a holder/cover for using a ZnSe lens with the thermal imager UTi690A from UNI-T. It needs to be printed in a hard/stiff material like PLA. This cover protects the ZnSe lens from both the front and back when not in use. The ZnSe…
A cigarette holder designed for a 1920s crime dinner. It meets the requirements well and looks quite nice. It can even be smoked through. However, any risks cannot be completely ruled out. We used them and they seemed fine.
I created this design for the INGCO P20S Lithium battery charger 2.0A (FCLI2001/FCL12001E). The charger needs to be screwed in the base before mounting in the wall. You need to unscrew 4x M10 Torx tapping screw from the bottom of the…
Following Grimm's traditions, step files are better than stl. Please thank Grimm/Nash for the remake. This wouldn't be possible without his step files: https://www.printables.com/model/865559-onewheel-pintx-z-battery-box-remake I made the…
Here is a 20s6p 21700 cell holder designed for the Ninebot G30. V1 460mm (L) x 117mm (W) x 23mm (H) V2 460mm (L) x 117mm (W) x 13mm (H) making it an ideal fit between the two weld seams in the frame. It also provides sufficient space on…
puede que los ejes no funcionen😅 si es así coméntenlo y lo arreglo en una segunda versión😀👍
Very nice and detailed model in Wall Art format of a Mclaren 720s Spyder.Size can be changed. I accept model suggestions
A Hot Wheels scale antique Esso Gas Pump. For best results I suggest printing at 100% infill with a 0.2 mm nozzle and 0.1mm layer height. You may also wish to print with a brim or a raft, although I didn't use either. I did print it,…
To print the model, use supports, 20-30% infill works best, use support blocker near the lip where the hole is, the overhang is small enough to be printed successfully by most printers.
I think these will fit the x20 (non S model) or the new X20 Pro as well. Let me know if they don't. This model prints upside down and does not require any supports, although I did find I got more reliable adhesion when I printed with a…
Ah 2020, remember when we thought it was going to be fun and we all threw ever so unique 1920s new year's parties to welcome it in? Well, this was for that . Based on iconography from one of my favourite design periods, the transition…
Have you ever thought that a d20 has just the right amount of faces with '1' and not enough '20's? Well then I have the die for you! Still haven't found a good way to print this that it rolls well. Will update once I do How I Designed…
Mclaren Mini Wall Sculpture Layer height: 0.2 - 0.3 mm Enjoy!
Lens cover for the thermal imager named: UNI-T UTi690A, UTi120S and UTi712S It's a snap on fit to the thermal imager and the lanyard can be attached to it so you dont loose the lens cover when using the thermal imager. Adding the UNI-T…
Holder for 20 Sharpies. Keeps the Caps inside. Best printed in Transparent material to see the Colors. Be aware: The hols of the caps a little bit to wide. Just use some tape around the caps to keep them in place if needed. I included the…
A tabletop holder to store your your 20s in Crokinole. Accommodates up to 8 discs for those perfect games, or use one holder for all players. A cutout in two sides of the holder allows you to easily keep track of how many 20s have been…
LEGO Mercedes 220SE Cabriolet 1960
Recently I got a Jumper T20S Receiver/Transmitter for FPV Drones. I chose the RDC90 Version and really needed something to protect my gimbals, so I made this. Printed on a Creality Ender 3 Neo with PLA, 0.4mm Nozzle at 0.2mm Layer Height.…
Oil Filter Wrench for Motorcraft FL-820S. 15 Flute, 93mm. Hand or 3/8" drive. Print face down with no supports. Compatible Vehicles Cadillac - STS V8 4.4 (2006-2009); XLR V8 4.4 (2006-2009) Chrysler - Aspen (2008-2009); Sebring V6 2.7…
I modeled a replacement slider for the FrSky X20 and X20S RC transmitter that flips the long part of the slider to point down. This is more comfortable for me to use during flying. Be very careful trying to fit this on after printing. If…
After looking around on the internet, I couldn't realy find a model for this type of truck, so I created one myself. If you want the truck to be as in the photo, print both fences, if you want it to be a van print the van_back. I've…
A 20s holder for Crokinole. The holder mounts onto the side rail of your board. It is meant for boards with a typical ¼" width sidewall. Windows on four sides of the holder allows you to easily keep track of how many 20s have been sunk…
Originally published here: Samsung Galaxy A20s a207 case by tato_713 - Thingiverse This case is for the Samsung A20s phone (models started with a207), for the A20 (a205 models) look here . Thanks to Cesar Augusto Finger for testing this…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Will not fit Gemini version because heatsink is different. To actually make this, you will also need connector PCB . This model is created for one like in the pictures – “Jumper T-Pro external module adapter” on aliexpress or this . The…
Bring true vintage mechanical utility into a modern home. This design isn't just a decorative plate—it is a mechanical adaptor that transforms a standard modern Decora rocker switch into a fully functional 1920s-style dual push button…
Copper Nickel sheets https://de.aliexpress.com/item/1005005986261829.html Use 0.2mm/0.4mm Nozzle and PETG for the best result.
Update 9/6: Found the sweet spot for printing this at an angle. I have added a new 3mf file with the exact orientation i printed at. Bambu Slicer gives a angle of 59 degrees for the Y axis. I also changed to glass infused ABS and it has…
Gimbal protector for the Jumper T20s. Will need to be printed with supports.
Print in PETG Props need to be trimmed a litte bit
The size of battery metal contacts is 15 x 13 mm , thickens 0.8 mm A dry wall metal supports are good alternative for metal sheet , for contacts. A wood screw betwine 20 - 30 mm depends on tool handle size on the other side , for securing…
The Lenovo M920s is a small form factor pc perfect for use as a home server. It is low cost and easy to find on ebay. It can handle GPUs that require 75 watts of power from the PCIE slot. The only issue with this PC is that the case is…
Stick ends for gimbals on the X20 and X20S FrSky transmitters. You might need to adjust Horizontal Expansion to pull in the outside walls a bit for overextrusion on the outer walls. You can also just increase the size by little amounts in…
I like a bigger back momentary SI button on the X20S so I designed this. It replaces the plastic mechanism on the inside and has a screw on button top. For the internal part, Support should only be used on the flat area that is suspended…
Adapter for Nexx X-Com 2 Intercom Slot (Helmet) to Standard SENA Intercom This adapter allows you to mount a standard SENA intercom to the dedicated Nexx X-Com 2 slot on your helmet. Designed for a secure fit using 2x M3 screws and 2x…
You can use this nozzle on your Ryobi air blower to remove dust, and it’s especially useful for drying your car after washing it. You can modify the size of the nozzle in Fusion 360 using the provided file. By default, the air outlet…
Ninebot-G30 20s6p Cellholder – Advanced Assembly Files Cellholder Dimensions: Length: 460 mm Width: 117 mm Height: 13 mm Hole Diameter: 21.4 mm Overview This new version of the Ninebot-G30 20s6p cellholder is designed for advanced…
Hey out there! i printed this tire in A95 TPU and it didnt went well on my test track. Because the car was around 1 second slower then with the original carrera tires. so if u try it out then plz use an softer TPU. In the slicer menu add…
这是一个Jumper T20/T20S遥控器的屏幕底座，通过与相机快拆组件的结合，实现fpv屏幕的角度调整和快拆。由于安装屏幕后遥控器重心会发生变化，推荐搭配对应的重心调整器使用。需要购买以下部件： 1/4相机云台螺丝，螺帽厚度2.4mm，直径12mm（以下淘宝链接选择 “TF7012”…
I have a Begode EX20S suspension unicycle, and found that I wasn't really able to use the upper stock power pads very well, as the 'gap' between the front and rear pads is quite large so I found I wasn't even moving my leg back far enough…
A big thumbscrew is better for my old fingers. I remixed the C930e horizontal mount remix to work with my C920s and provide clearance for a thumbscrew from yet another camera mount .
20s5p 21700 Cellholder 21,5 Cell Diameter 0.2mm Nozzle
Here is my take on a lens cover / 20 mm ZnSe macro lens combination to be used with Uni-t UTi690A (tested) / UTi120s - UTi712s (it should work as they seem to pretty much be the same camera) thermal cameras that does not require glue or…
Fit the X-20 Series of FrSky Transimtters and protects the three-axis gimbals sticks. I printed it out of PETG with 20% infill, three perimeters and gyroid infill on a .6 nozzle. Should work with any transmitter with these types of sticks…
Radiator modeled by Davis Woody on Grabcad Still missing some odds and ends.
Spacer to improve the ergonomics of the FrSky X20S transmitter. I found that the position of the radio was uncomfortable and it weas unnecessarily short. This spacer makes the height more similar to my other radios. Printed in ABS on a…
This is a 20s3p 21700 cell holder for the Xiaomi Pro2, which can be screwed onto the original mounting points. This has already been printed and is in use. I have printed the old version out of ASA-CF. A newer version is included, which…
Relocates the antenna to a much more crash resistant location. Print in TPU, PETG or ABS
20s5p 21700 Cellholder 21,3 Cell Diameter 0.2mm Nozzle
Rotor Head of Model Helicopter Blade 120s. Drilling of functional holes required. Print instructions Layer Height: 0.1mm Supports everywhere Best to use PETG
I decided to upgrade the case for my FrSky X20S and ordered one from AliExpress - https://www.aliexpress.com/item/4000677757547.html (size: 330x235x170mm). The original insert fits right in but leaves a 3cm gap on the side so i designed…
A lame attempt to make a more thematic encounter token. I've got the campfire tokens, but I don't get what a campfire has to do with an encounter. They look more like postcards or still shots, so I tried to make a 1920s style camera token…
I designed these with a spider web motif, and suggest printing in PETG, or you could try TPU if you're comfortable printing with supports in TPU (I haven't figured that out yet so mine were a mess). They're not large, but provide some…
Print in TPU or PETG for best protection
The bottom corners of the aluminum battery cases on the EX20S are relatively exposed, especially on tight trails and on compression of the suspension and/or tire. I designed these corner protectors to protect the cases from scratches and…
Hello there, This is my very first share. I use Ikea bror shelving system to put all of my 3d printers and some other accessories. For my Prusa MK4, I used the Logitech C920 Original Prusa Enclosure Mount from Hoppsen, which is fantastic,…
Created these protectors as I preferred the separated design compared to other protectors. I also use larger sticks so needed additional space for them to fit. Printed in PLA on an AnkerMake M5 .2mm layer, 2 walls, 15% infill. Print as…
Designed for a BN-220 GPS.Need new Screws M3 x 16mm
Onewheel battery model 20s2p
Molecular surface representation of yeast proteasome from PDB 1FNT . Each of the components (alpha in green, beta in blue, and caps in red) were rendered separately and printed in different colored PLA. The beta catalytic domain was…
Print in TPU or PETG, replaces the LEDs
Full Protection, 10, 15, 20 and 25deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws
This is a simple endcap for a 4S 38120 battery pack with the typical orange holder with pins. It includes egress channels for large-gauge wire as well as top and bottom BMS connections. I've included the Fusion 360 file so you can…
3D model of the 1FNT x-ray file from PDB
P20s battery box to add buck/boost or battery cut-off circuits to use a p20s battery as a power bank or power source
Same as the original rubber mount, but adapted for a typical chinese action camera. Print instructions 50% infill makes the mount strong but lighter than the original. Print with flexible filament.
Do you have a Soviet-era Trabant from East Germany / DDR? If so, the electric Windshield Washer Pump has likely deteriorated. In particular, the Drive Coupling has likely stripped out. This is likely to fit other Eastern European cars of…
This rear grip fits directly over the sharp metal edge of your EX20S electric unicycle, giving you a more comfortable option to lift or carry the EUC. The centre hole is to allow fitting without interfering with the screw that comes down…
I know, I know, we need another 3D printer design like we need a hole in our heads but..... I love the Ultimaker with a passion, in my opinion it is THE printer to beat, it has the smallest layer height of a personal FFF printer I have…
I designed this easy-to-print front fender as a way to increase the waterproofing on my EX20S. The mounting holes line up with those used for the rear fender bracket to the EUC frame, so simply remove the rear fender by removing the two…
This is a lens plate I designed for an old-style bellows camera. The overall dimensions of the plate are 6" x 6"; the diameter of the opening for the lens is 96.2mm (approx. 3-3/4"). It includes a spiral indent to capture a ~3mm pin on…
A slighty modified (improved IMHO :P) guard for the x220s camera. Print instructions Category: R/C Vehicles Summary A slighty modified (improved IMHO :P) guard for the x220s camera.
Designed for the Jumper T20S. You'll need a M3x12mm internal hex screw and a M3 nut for assembly. It's possibly a good idea to print from PETG or ASA.
A collection of d20s with their 20 faces replaced by the symbols for the colleges of Strixhaven The dice are approximately 35x35x35 mm, with markings 0.4mm inset. I have not yet attempted to print these files yet and as such I cannot…
This adapter fitted perfectly so I just made some holes for the pd65w case and soldered a pair of cables, for the battery conections I used two cables, a pair of male american outlets and four selftapping screws, I used instant glue for…
For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m) Main Landing Gear Tire Replacement for losing weight of the plane, with the removal of the complete brake…
This is a complete kit for an absolutely monster 72V battery, Using 5Ah 21700 cells, you can produce a 72V30Ah battery. The kit includes a case and a lid. It was made using my battery design software that can be found here:…
Print in TPU use TBS ND Filters: (https://s.click.aliexpress.com/e/_9ROQbh)
Replacement feet for the Lenovo ideapad 520S laptop after they inevitably detatch and get lost. It's the same height as the original so it should work even if just one is lost. Might be compatible with other models. Best printed in the…
Einfache Box für eine Tauchlampe “Wurkkos WK20S”. Durch die Form der Lampenaufnahme wird ein unbeabsichtigtes Einschalten der Lampe bei eingelegtem Akku verhindert. Druckparameter: Material: nach eigenem Wunsch (PLA, PETG, ABS/ASA,…)…
Full Protection, about 30 grams. 10, 20 and 30deg angles. Print in TPU for more durability and PETG for more cam protection (but will break while crashing) Use M3x25 Screws Update 16/4/20 added 15deg Version
Yet another quick and dirty OpenDTU case. This is a very simple box with thin walls and cover has no click system but it does the job. Requires: 1x ESP 32D dev board 1x CMT module with E49-900M20S 2x M2.5x4 Print: infill: 0 walls: 2 layer…
Holes for magnets 6x2 (one or two together) and/or 30x10x2. Please check out my other creations: https://www.printables.com/@RadekPilat/models
Silhouette of a McLaren 720s. Follow for more similar car designs - PLEASE READ LICENSING Category: 3D Printing
Support to hold the detergent bottle in place when it starts to empty The support can be printed in PLA, PET, PETG... Optional support trees The cap can be printed in Flex TPU (You do not need the cap if you are not filling the detergent…
Ce modèle est divisé en deux parties : Un conduit pour le câble XT60 qui évite que le câble parte dans les hélices et s'abime.(PETG conseillé pour plus de résistance aux crashs Une butée pour éviter que la LiPo ne glisse et tombe du drone…
A collection of d20s with their 20 faces replaced by the symbols of the organisations of the Forgotten realms. The dice are approximately 35x35x35 mm, with markings 0.4mm inset. I have not yet attempted to print these files yet and as…
Xmod 2006 BMW 320si Front Clip Changelog: V2: fixed weak point on rear of clip Category: R/C Vehicles
A simple replacement for the battery cover on the GMC-320S geiger counter. Has a somewhat steep 60 degree overhang, but is printable without supports otherwise. I used white Overture PLA.
Just a little thing to hang the Mould King 720S GT3 flat on the wall. Mine is hanging there like 11 month and seems to be stable, even with its weight. Print the mount and 2 pins, they might have to be glued in. Designed to be printed…
For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m) After removing the very heavy brakes from the main landing gear wheels you can opt to replace the solenoid…
For use with the JP Hobby ER-120S Tricycle Full Set with Brakes (Sebart Avanti XS 1.9m or ARG Mistral 1.8m or EA Viper 2.0m) Nose Landing Gear Tire Replacement for losing weight of the plane, for a total weight loss of 10 grams is…
XT60 Holder to Eachine Wizard X220s Category: R/C Vehicles
Foxeer Box 2 mount for WIZARD X220S, if you want to edit this file there are Fusion 360 files
A collection of d20s with their 20 faces replaced by symbols. This is the second part of the collection focusing on symbols related nature and weather. The dice are approximately 35x35x35 mm, with markings 0.4mm inset. I have not yet…
Based on the wonderfull parametric rugged box, I created the insert to neatly house the Icom IC-20SR PMR radio's and the USB-C charging cables. I added a bit of foam stuck to the lid to keep them from rattling (they won't fall out but…
