63 models
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
This model will print in 33 minutes. It allow testing your z-axis for wobble on a 125mm tall part. It will also challenge you bed adhesion but should print without any issue if your printer works fine.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Something I have wished was produced but have never found anything like it. I needed a way to neatly connect 25x16mm self adhesive trunking to a single UK pattress so I could relocate a light switch in my workshop without having to chase…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
I have provided versions with and without mounting holes for M5 screws, in case you want to modify the model. For easier remixing, I have also included the SOLIDWORKS files (designed in SOLIDWORS 2020) and their STEP AP214 versions.…
Print approx. €4.94–€6.04 excl. taxPreliminary estimate for PETGSource material: PET
I hade some difficulties mounting the lids of a cable channel in a tight place, the vertical cables fell out of the channel interfering with the lid while trying to lock it in place. Designed for 25x16mm (width x height) channel Clas…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Box ZigRig 1x
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Einfacher Dichtstopfen für eine 230 V Außenanschlussdose mit M25x1,5 Gewinde. Ersetzt die mitgelieferte Kabeldurchführung / Simple sealing plug for a 230V outdoor plug socket with M25x1.5 thread. Replaces the originally delivered cable…
Made an organizer for our bathroom cabinet (Ikea Enhet 130cm depth) Easy to print, and should fit most bathroom cabinets of other brands too. Wall Thicknes is 2mm. Wall Height is 40mm. + additional 2mm Floor Thickness (Total 42mm Height)…
Plug/cover for the threaded holes of the Mennekes 1419 wall mounted power socket or similar. Since it's scripted you can adjust the parameters to suit your needs or obscure application. Current configuration: Thread diameter: M25 Thread…
ReadMe.txt Festool MFT DIY Klemm Dog Anwendung: Dieser Klemm Dog kann durch anziehen der integrietren Schraubverbindung fest mit der Arbeitsplatte verbunden werden. Die Idee ist nicht neu. Beispiele finden sich hier viele. Das besondere…
Small Figure for Board Games: e.g. Halma, ludo
length 25mm inner width 10mm width 18mm height 10mm two side bended one side bended no support use bridge 0.2 layer 100% infill
This is yet another mitre / miter box but with a unique difference! It is designed to hold and clamp 25mm x 11mm window fly screen frames to allow for easy accurate cutting of the required 45 degree angles. I designed it with two guided…
the size 25x18 is the outside of the cable trunking (consequently, the inner space of each joint covers) if there's a lot of downloads, i might consider building the 2 missings parts "90 OUT" & “END”
This is a tile storage box for these rifraf tiles , inspired by this design made to fit inside this specific organiser . It is 225mmx160 and is made to REPLACE the "TM - Tiles" box. /!\ Unfortunately there is no enough space to fit all…
Cable chain model with start and end support. Cable chain can be printed without support in horisontal position (last picture). You can easy adapt size to your needs in Prusa Slicer If you need any modification - ask me :)
Astronomy red dot finder holder for big binoculars 20x80 (25x100) or similrar types Other componets: 7x M3 srcew 5x M3 nuts 1x Red Dot Finder Note: Use a tap to create a M3 thread in the dovetail For Binioular 15x70 see:…
Фурнитура для кабель-каналов. Заглушка 25x16. Печать от стола.
Cable chain system with 25x15mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 40mm bend radius. Your printer should be able to print 0.2mm…
This is an improved design with smoother intake ramp and despite being slightly smaler, is much more effective. It is however harder to print and does need supports. I found the stock 100x55mm Kotto intake to be noisy (made a whistling…
A minimalist and functional hardware solution for your bathroom, kitchen, or hallway! This clever foldable wall hook serves as a sturdy towel or coat hanger. When not in use, simply push the hook back into the housing for a flush, hidden,…
A simple Monitor Stand with Hexagon Infill and place for storage The measurements for the Display foot is 225x13mm Designed for a Samsung S24E650 or S27E450 Best print setting is 0.3mm Prusa standart Profile with enough brim
Just a simple box I designed in Fusion 360. I intend to use it as an divider or extra shelf space by laying it on one side onto a larger shelf - but since it has a bottom it can be used as a "normal" container as well. Fusion 360 file is…
Create a frame for an insect screen effortlessly with these 3D-printed inner corners designed for a window screen profile measuring 25x10 mm. These corners are optimized for connecting profiles cut at a 45° angle, known as miter joints.…
15% infill PLA or PETG No need for support Suits for 2mm² cable M4 screw holes
Ritewing Mini Drak Motor Mount 2814, 25 x 19 and 25 x 25 mount holes pattern. Designed to fit Ritewing Mini Drak. I had Cobra 2814 1800Kv spinning APC 7x5, basically the recommended combo, decided to switch to something more efficient for…
J'ai besoin d'un embout pour utiliser une moulure 25x16 qui me restait. Réalisé sous FreeCad avec du PLA blanc.
Simpel ruler slide stop with an M3 screw. BOM: M3 screw M3 x 5 x 4 threaded heat set insert (standard voron)
Backstory When creating window frames for Seed pixels using 25x16 mini trunking (Available from many uk suppliers), the standard instructions are to take the commercially available top cover corner pieces and place underneath to make a…
Parametric model to create joining parts for 25x16mm cable conduit. Use the model at…
Nikon camera models such as the D800 have a built in curtain to close the viewfinder. But not on the “cheaper” models. Normally this will not be any problem as long as you don't do long exposures like in astrophotography. If the dark pic…
Due to the tight tolerances you may need to change some parameters. I have marked the most important dimension in the last picture. I used the "dust_cap_17" printed on the Bambulab P1S. Stahlbus brake bleed screw:…
Don't overthink this one, it's just an inch long peg for a 1/4 inch holed pegboard. Category: Organization
Save lots of money on filter replacements for your HRV ventilation unit. With this filter housing, you can easily replace the filters with a filter medium with a thickness of 20mm. You can buy a filter medium to your liking and cut it to…
15% infill PLA or PETG No need for support This model was made for 4mm² cable. You can run 4mm² cable above the bumps . For 2.5mm² cable, it fits below the bumps M4 screw holes
Most Ikea furniture has standardised internal storage space to accommodate products like the sockerbit and kuggis. I ended up with a bunch of these in my workshop and wanted a divider to separate loose parts.
I made these so I don't impale myself on the sharp corners as I am using the shelving as a bench top. I think these shelves are sold under a lot of brand names or at least very similar ones are sold are so these may work for you as long…
The motor mount for biger motor D3530 with holes pattern 25x19mm
I made this for a 50 AMP outlet box I found on Amazon. Joinfworld 50 Amp RV Outlet Box 25HD Adapter. ASIN B0D142ZXQ7. I could not find a reference to a 25HD thread pattern. I initially tried a 2mm pitch, but it turns out it is a 25mm x…
Aus Kostengründen habe ich einen Spitz C3542-05 Motor verbaut. Leider hat der einen Lochkreis von 25x19mm. Gedruckt habe ich es in ASA mir 3mm Stärke. Sollten heute beim Testflug 3mm nicht reichen, werde ich es auf 4mm erweitern.
Small storage box originally made to be used for a person with reduced mobility (PRM) walking chair where wallet, phone etc. can be stored. The box was printed in PLA material (however, I would recommend PETG as it has better material…
15% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
Couple of quick little box designs for cable breakouts from 25mm x 16mm cable ducting. Uses some m3 x 8mm screws and some m3 inserts.
Rather than buying a product like the FilterLock furnace filter (which probably does a better job at sealing the opening) that can be bought on Amazon or most big box retail stores in North America, I made a filter cover for my furnace…
These are custom Niimbot label holders for the Multiboard system , designed to keep label rolls neatly stored, easy to access, and clearly visible on your board. The holders are made to suit the following label sizes: 25x15 40x30 50x70…
I didn't had the original waterproof kit for my Omada EAP650 Outdoor access point, so I created this adapter to use a standard M25x1.5 waterproof gland instead.
tested in both PLA matte and PETG, printed vertical with the top up, tree support or snug, i used variable layer height on the top curve, printed at 0.15 balanced. I would also add a brim just to give more bed adhesion.
🇹🇷 Türkçe 25x17 Sineklik Köşe Bağlantı Parçası (Tam Uyumlu) Bu modeli, kırılan sineklik köşe bağlantı parçasını değiştirmek için tasarladım. Orijinal parçayı ölçerek 3D ortamda yeniden modelledim ve 25x17 mm alüminyum sineklik profiline…
A medium sized baskedA medium sized basked --- Printed with 0.4 nozzle + pla
I've got an eurodrive with broken fan bracket, probably someone tried to fit 25x25x10 fan in it instead of x8. With this bracket you can do that without a shadow of hesitation, Remember about leaving a little bit of space while mounting a…
Same as my remix for the 14x14 roof opening, but sized to the smaller opening needed for my OutEquip Pro rooftop air conditioner. Print 2 each of the corners and keys. All the same instructions, rules and caveats apply.
Our robotic vacuum would get stuck in the drying rack, and all the other models were made for the circular tubing kind. It rises the drying rack just enough to have the vacuum robot work around it rather than trying to mow over the feet…
15% infill PLA or PETG No need for support Suits for 2mm² cable M4 screw holes
15% infill PLA or PETG No need for support Suits for 6mm² cable M4 screw holes
Rather than buying a product like the FilterLock furnace filter (which probably does a better job at sealing the opening) that can be bought on Amazon or most big box retail stores in North America, I made a filter cover for my furnace…
I made these so I don't impale myself on the sharp corners as I am using the shelving as a bench top. I think these shelves are sold under a lot of brand names or at least very similar ones are sold are so these may work for you as long…
A small storage box, with a window. I use it to keep gift cards (in their cardboad peg-board packaging from the store), AMC gift movie tickets, etc in, so it is sized to hold all of those dimensions. I designed this to look like the great…
This highly affordable and customizable air purifier kit uses a clever design based on readily available components, making it an ideal DIY solution for improving indoor air quality. It features a common 16"x25"x1" North American furnace…
Standard bracket 30x30mm, or 1.25" x 1.25" for all our imperial friends. Printed in PETG. Category: DIY
This is a 125x190x15 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 125mm External diameter : 190mm Width : 19mm Balls : 18 POM ball…
![[OECC2] 25x15mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161407/images/8915763_c379734f-27b4-49d9-aa5e-6aaf6c7de211_d0d3623c-9690-49de-8063-aed342546209/b87460c0-58f0-49c7-a329-0dfc596cf033.png)
