Counting matching models…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
This model is used to hold a 330 ml can on bicycle bottle cages.
yet another stackable crate for 500 ml cans. Supports needed. A version for 250 ml Red Bull Cans is available aswell the logo was made using this model
ACHTUNG: HIER IST DIE NEUE v2.3 VERSION: LINK Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke…
Please add your makes when you are done This is a PLA printed 3D part designed by myself in Fusion 360. The wall mount is multi coloured to help it blend in better with the wall and the wheels. Only 1 fixing is needed into the wall. I…
Can dispenser designed for tall 330ml cans (diameter 58mm, length 146mm). Other dispensers I tried didn't hold cans well enough while traveling downwards. Dispenser has been designed to fit 350mm depth shelves (tested on Bosch fridge).…
Update: Widened all the models 2 mm to better accommodate can size variations. (Thanks to @Yoyo for his input!) ------------------------------------------------------------------------------------------------------------ Nested and keyed…
The Original has the issue that you had to sand the connections to fit. Also, the connections was to thin so that the constructions start to collapse if the rack was to full. I changed the tolerances for a better fit, and modified the…
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
Like this model? check out the smaller version: https://www.printables.com/model/1366342-two-in-one-can-holder-for-250ml-and-150ml-cans 🛠 How Does It Work? This 3D-printed can holder features a clever sliding mechanism with a built-in…
After realizing the scarcity of dispensers fitting the new tall 330ml can measurements, I was searching for a solution. Pedro's model is fantastic, but only suitable for the ‘fat’ 330ml cans. This is why I rescaled this and uploaded it…
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
Intro: The motivation for this design was to build an eGPU with a $250 budget with used parts with a 10 liter maximum volume. At 165mm x 165mm x 330mm, it comes in at 8.98 liters. Full assembly guide here:…
If you love your Yeti can-holder like me and you also like to alternate your go-to beverage from those in the standard 375ml cans to those in the shorter 330ml cans, then this simple print is much more cost effective than buying a second…
about 5.5 ft. reinforced with a combination of .5 and .25 in dowels. have fun. Category: Props
Compatible with: Extruder : SKU M3301 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10 / Ender 3 Printers Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4010 Blower Probe: Various Options 3D Printer Model: CR-10 CR-10s…
A320/A330 131VU panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Important Note: While this panel can…
Print the dowels at 40% infill to give them some strength. I used expanding glue, e.g Gorilla Waterproof Glue, in the dowel holes so the assembly Is stiffer. Use cable ties or clamps to keep the parts in place while the glue expands and…
Can Holder Insert / Riser I decided to make these simple inserts that can make using my canholders more enjoyable. 41mm Insert for smaller cans in a larger holder (12oz can in a 0.5L holder) 330ml Insert for slim (coke) cans in a larger…
A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 Two-finger operation – open & close…
Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…
June26 re-design note. @s0ren reported that in his print of the 8 can holder, he had problems removing cans (removal aperture not high enough). He had printed in PLA, I had printed in PETG, perhaps there was a difference in shrinkage…
1:200 Desk Model of the Airbus 330-800 NEO. The .3MF file contains the parts for the print. Wings were printed with supports.
Hallo, ich habe hier für eine eBike Bosch Mini Remote BRC3300 ein Reparaturschelle konstruiert. Das Original ist leider gebrochen, ein Ersatzteil gibt es vom Hersteller nicht. Gedruckt in PC ist es stabiler als das Original. Auf der…
Made the goodyear eagle text flat with the tyres so it looks more like it's printed on. v1: Was my first version and gives the letters a faded look. The backtyre is not fully optimized and prints extra white in de tyre it self. v2 does…
HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…
Shroud and probe brackets for the NG Revo Extruder for the Ender 5, Ender 5 Pro and Ender 5 Plus.
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
The Lego model 10330 - McLaren MP4/4 Senna - comes with tyres that are much narrower than the real cars. This model is based on @tomvit work, and provides separate parts for tyres and rims to be printed individually. For best effect, I…
LEGO set 10330 McLaren Senna Formula 1 car tyre/wheel with or without logo's. My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original…
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
If You are glad with my work You can buy me coffee: https://ko-fi.com/szarkadiusz Legendary Vikings horn for drinks - optimized for 250/330/500 ml cans Be true legend Old tales said that You need fo finish Your drink in one sip ! Be Brave…
Dosen Deckel 250 ml gedruckt aus TPU 04 Düse in 0,2mm geeignet Insekten ab zu halten bedingt dicht wenn richtig angebracht läuft keine Flüssigkeit heraus. gedruckt mit Genius Pro 04er Düse bei 0,2mm mit geeetech TPU einfach und simpel…
I tried to adapt the original born for the VZ-Bot 235 to the VZ-Bot 330 for those who have the stepper pin facing inward I added an Airbox with the lower left part recessed so as to adapt it directly without having to turn the engine, if…
-tisknuto z PLA -Dewalt TOUGHSYSTEM 2.0, DWST08330-1
A320/A330 ATC MSG panel NO PCB NEEDED! This panel do not need any PCB as it has the unique “Button Base” panel for easily insert and attach buttons, switches, rotary, potentiometers and encoders. Can be connected to 131VU panel which can…
Hotswap 2.5" HDD/SSD caddy for old Fujitsu Primergy servers. Fits as a replacement for A3C40058356, see compatibility section for servers. Fits drives up to 12.5mm, however airflow might be an issue. You can use the metal piece from blank…
If you look along the Z-axis supports (the ones with the bearings), you'll probably notice that they curve due to the weight of the bed. This was a concern for me as I don't want the bed flexing as more plastic gets added to a print. Many…
The final print might require a bit of trimming to fit. But works just fine. Compatible with Fluke: 333 334 335 336 337
Car key/fob combinations are notorious for becoming brittle and failing. I scanned the fob internals and designed the case to use M3 SHCS and nuts. 0.2mm, PLA, Sovol SV01
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
Everyone wants a custom wheels for this MP4/4 Lego set are same reason… However, I can't found a after market parts, so I carry on my first try. Project characteristic Blender based project. Referenced to a lot of MP4/4 public source. My…
Scharfenberg magnetic coupling for model trams and light railways in scale 1:87 (H0) The magnetic coupling can be used for almost all light rail models and many GDR tram models that use Scharfenberg couplings. The printing should be done…
Remix of MyStoopidStuff's Under Desk Slide Out Mount For A Lenovo M700 (also fits the M93p and P330) Tiny PC Really liked the design and fit but needed a rack mountable solutions, step file included incase anyone wants to make their own…
Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a…
Filament: - JAYO - weiß - PLA+ - eSUN – hellbraun – PLA+ Objektgröße: ca. L:B:H in cm Drucker: Prusa MK3S, Bambu Carbon X1 Düse: 0,4 Schichthöhe: 0,2 Infill: 15% Stützen: keine Druckzeit: siehe 3mf/gcode Ziemlich passgenauer Deckel. Zum…
The HR-3300 was the first VCR commercially available. This is a 1:12 miniature I created looking carefully at the pictures on the internet. The test print was performed with an MK4 and a 0.25 nozzle, but this would require a resin printer…
This is a highly perforated PCIe bracket for an HP RX6400 that allows it to be used in a Lenovo P330 Tiny USFF system to replace the original Nvidia Quadro GPU. Theoretically any reference low profile RX6400 will also be compatible with…
Belt guard for X5SA 330x330
Various sizes. Easy to print. Preferably in PETG. Have fun with it.
material PLA can 200ml: https://www.printables.com/cs/model/586086-cap-for-the-can-200ml-d-515mm
Over the years I would end up dropping the remote a few times, in doing so the battery cover ended up breaking so for a long time I was using tape to hold the battery in, I then got an AnyCubic Photo Mono. From using tape to hold the…
I got this Lenovo P330 Tiny back in March of 2024. I mostly used this as a NAS. Its stock configuration included a 2 GB external GPU, which worked fine for basic tasks. I also played some games on it like FH4, and FIFA 18. While exploring…
Adapter for the Metabo DH 330 Dust Collector to 50 mm
this is my favorite post-it™ dispenser, and they stopped making them years ago, and i can't find any on ebay, so i jumped into fusion. printing requires no supports, fill the cavities with weights of your choice, i designed it to take…
Printed in Prusament PLA Galaxy Black - 0.10mm Detail - Support on the bed only - 15% infill - 5h42 printing.
This model is compatible with the lego system.
Print with 0.2 mm layer height Hardware parts: M3 heatset inserts M3 screws 10mm diameter tube a compression spring (100mm long) a tension spring (20 mm long) LM8UU linear bearing LM8UU linear rod (60mm)
This is a remix from stusona's can handle. This handle fits the european 330ml soda cans. Enjoy Print instructions Category: Food & Drink
Very grateful to MTMscad for his original, I modified it to perfectly fit the Tecsun PL-330 receiver and added a cutaway (circled in red) to allow the volume knob to turn freely.
This is a koozie cover for 330 ml & 500 ml aluminum drink cans. There are 3 versions for common can types: “Standard 330 ml” (66 mm diameter, 146 mm height) “Sleek 330 ml” (58 mm diameter, 115 mm height) “Standard 500 ml” (66 mm diameter,…
I designed an almost identical spare wheel for the rear of my Makita cordless lawn mower - more stable than the original because the soft struts are no longer needed! The original hubcap can still be used. A further improvement in driving…
Preferred printing at 0.1mm steps using any colour ABS or PLA. Print at 100% infill given its a relatively small component and the strength that a 100% infill provides, is required. The knob attaches via a 3.4mm hole that needs to be…
Can holder with rotating protection lid – easy print A minimalist can holder for standard 330 ml cans. The can is inserted from the top and clicks into place at the bottom; removal works in reverse. The holder grips the can using its…
Caddy designt for the Fujitsu Server RX1330 M1. (Maybe it can also be used on newer generations) The caddy is designt for transparent filaments, you can see the HDD status LED on the front. INFO: 2.5" caddy needs support! ...the 3.5"…
Eine Reduzierung von 100mm SSchlauch auf den Anschluss der Absaugung für eine Metabo DH330. Der Schlauch wird an diese Reduzierung angeschlossen. Dann kann der Schlauch mit der Reduzierung an den Dickenhobel Metabo DH330 aufgesteckt…
Nested and keyed Beverage Can Dispenser for standard Europeans sleek/slim soda cans (330 ml / 11.2oz). Holds seven (7) cans. Model is split into two halves so it can be printed on a standard size printer (bed size ≥ 20cm). The two halves…
A simple Touring Car/Rally style button box for the affordable Runsco 330mm Steering Wheel. The ideal low cost way of converting a real steering wheel into a Sim Racing accessory for your sim rig. The steering wheel specification consists…
I have made a new version of my wheel for the LEGO set 10330. This one has the 11 for Alain Prost Original model - https://www.printables.com/model/825905-lego-set-10330-mclaren-senna-formula-1-car-tyreswh
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
This model is compatible with the lego system.
The original is larger than it needs to be; this saves print time, material and back panel space.
This is the cap for the 80mm Mamiya lens. I obtained a good result with PLA and 0.4mm nozzle (0.2mm layer). Enjoy!
This model is compatible with the lego system.
Realistic Copy of the Airbus A330-300 Comes with: Colored Airplane (No splitting) Non Colored Airplane (No Splitting) Non Colored Airplane (With splitting) Layer height: 0.2 mm (0.12 mm for sharper surface detail) Infill: 10–15% (display…
Very strong case for Lexus RX400h, RX400, RX330. Uses transparent glue to securely hold the case together. I prefer glue because screws and nuts are not attractive for this kind, small detail. Case will not flex and very strong when…
This is a remix (of a remix) of a eGPU enclosure. The previous models were made for smaller cards, this one in theory can fit a 330mm gpu. For more information about this enclsoure, check the original models. Please note this is the first…
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
Battery Pack for Recycled - 13300 from disposable E-Cigarettes. https://www.printables.com/de/model/1008015-battery-pack-for-recycled-801640-fake-akkus
Nested and keyed Beverage Can Dispenser for standard 330 ml. Euro cans. Holds six (6) cans. I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required…
I designed this adapter for soft drinks mainly for skoda octavia 3, but it could works with other cars. You can find two versions - for 250ml ("red bull" ) or for 330ml (soft drink) can
I printed this in TPU filament on an Ender 3. This fit on my Sekor 80mm lens. It could fit on other lenses with a diameter of 48mm.
This model is compatible with the lego system.
This is an osVAC adapter for the Metabo Planer DH330. The larger end has an inner diameter of 65.5 mm. Printed with 50% infill, a brim, and the large end touching the bed. ********************* Dies ist ein osVAC-Adapter für den Metabo…
The Airbus Beluga XL is a specialized cargo aircraft designed to transport oversized components, primarily for Airbus' own aircraft production. Introduced in 2019, it is based on the Airbus A330 platform and features an enlarged fuselage…
I've designed these dual-material HIVE palm rests to match my 75% mechanical keyboards (specifically Keychron's Q1 and V1). Video: https://youtu.be/W3amrgXQBYA Key Features: 75% sizing (w: 330mm, d: 80mm, h: 19mm max @5º slope) Dual…
Designed to match Large size Command strips. Lego style adapter to connect into the bottom of the base mount for the car. Print 2 mounts and click into the locations shown. There are two mount lengths depending on the offset you want from…
When moving, 2 legs (part number 6033081) broke on the Miele dishwasher, so this model was created. The front ones fit perfectly. Haven't tried the back ones.
The Airbus A330 is a wide-body, twin-engine jet airliner developed by Airbus. It made its first flight in 1992 and is widely used for medium to long-haul flights. Known for its fuel efficiency and comfort, the A330 is popular with…
Das ist ein Ersatzgehäuse für das Heidenhain HR 330 Handrad. Es werden Gewindeeinsätze für M3 benötigt. Diese Dateien sind nicht separat für den 3d Druck vorbereitet und sind nicht ganz einfach zu drucken. Um die Kanten ist eine Nut…
LEGO set 10330 McLaren Senna Formula 1 car tyre with logo's and no number My version has the 6 holes in the hub like the original. Lay the wheel on it's back. You will need supports. Back wheel to a size that is more like the original F1…
Object description: Soft jaws for the 300mm Knipex 86 03 300 Pliers Wrench. Replacement for original Article-Nr. 86 09 300 V01; EAN 4003773085812 Please note that the soft jaws on the photo look slightly different to the published design.…
This is a lens hood designed to fit the 80mm lens for the Mamiya C220 and C330 family of twin-lens-reflex cameras. The dimensions are roughly worked out from online images of the original metal hood. The diameter of the clamping section…
![eGPU Thunderbolt chassis for EXP GDC TH3P4 + ATX PSU [165x165x330mm - 9 liters]](https://media.printables.com/media/prints/429812/images/3562411_ec2f4b23-3b18-464a-bc88-986318650ad4/screenshot-2023-03-21-182821.jpg)
![M3301 CR-10 / Ender-3 [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Brackets](https://media.printables.com/media/prints/752941/images/5875415_aef71d45-79a9-45ac-914c-33f9cabdee76_1b470434-8aec-41fc-a3f6-a048b3c0addb/ngrevoender3001_2400x2400.webp)
![M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/735325/images/5748609_a9d64cd5-5eda-4399-a8be-543f085c15c6_d84847a4-8b28-4e4c-99e6-bdd8af654401/ngrevoender5001_2400x2400.webp)
