Counting matching models…
🧱Lego Duplo Brick 2x2#3437🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
I broke my sunglasses and I wanted to order a new frame, because the glasses itself had some diopter, but unfortanely mr.spex doesnt sell them anymore... So I tried my best and made a model. Its for use with the Polaroid PLD D343 807…
I sat on my glasses -yet again- and, since the temples (or legs?) survived, I decided to make a 3d model of the frame and print it, so I don't need to buy new ones! (the glasses cost 160€ new, but it only cost 19 cents to print them!)…
This model is compatible with the lego system.
I've printed a custom fan duct for my Ender 3 V2 and I didn't want to re-print everything just to mount the ADXL onto it. Instead I got highly inspired by this drag chain mount. I designed my own based on this simply because I liked the…
This model is compatible with the lego system.
this mount allows you to mount a ADXL343 accelerometer to the Prusa mk52 bed and Prusa i3 mk3s+ extruder. is designed for a ADXL343 not ADXL345. using this mount, you can auto calibrate Klipper input shaper. longer screws are needed to…
This model is compatible with the lego system.
The ADXL343 is a cheaper alternative to the ADXL345 that can be used to tune input shaping with Klipper. While it's a drop in electrical replacement for the ADXL345, the ADXL343's board has a different mounting hole layout. This mount is…
Printed on Elegoo Neptune 3 Plus
-Gedruckt aus TPU 98A von 3DJake.
This model is compatible with the lego system.
The clips of the red side marking lights in all four doors of P80 series Volvos (V70I, S70) tend to break when you try to remove them to change the light bulbs. Sometimes they even break when slamming the door too much. While the lights…
This is a remixed version of Q's ADXL345 mount. I modified their version to fit the Adafruit ADXL343 which has M2.5 holes instead of M2 holes. Like Q's version, you have to replace 2 of the M3x25 bolts with M3x40 bolts.
In a working season I ate 2 or 3 of these blue parts, they are really expensive where I live. So I designed, and printed one with PETG. I use the same for 2 seasons now and it is even cheaper.
I made a version that can be disassembled and is not glued together. You need to insert the nut to the small part opposite propeller as first thing. Enjoy :) Print settings: - printer: Prusa MK3S - layer height: 0.2mm - nozzle diameter:…
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
1:343 reduction planetary gearbox, 3 planet gears per stage
I recently started changing my printers over to Klipper with Mainsail, and could not find any mounts for the ADXL343 accelerometer like Teaching Tech used in his tutorial videos. So I created some options to share! There is a mount that…
Excuse the poor photos! ADXL343 (Cheaper than 345) mount for the new MicroSwiss NG extruder. A little overkill with heated inserts but hold solid to get an accurate reading. These are the brass inserts I used:…
This is a replacement Throttle/Accelerator Linkage bushing for the Jaguar XJS, but should also fit the XJ12. Tested this on my 88 XJS and it works beautifully. Print in TPU or similar flexible if at all possible . Included are two files…
This is a mount for the ADXL 343 (for Klipper fully compatible to ADXL345) accelerometer from Adafruit. It is designed with clearence for a M12 half-nut in mind which is default for E3D and TriangleLab, Mellow etc. M12 heatsinks and also…
Replacement clips to attach the rotor to the helicopter. An 8mm hole must be drilled through the roof of the helicopter where the old clips have been. The clip is pushed through from below and the rotor is then clipped on it. eSUN PLA+…
Just a tiny modification of WhatWouldAnEngineerDo's ADXL445 Mount to fit the Adafruit ADXL343 with M2 self-tapping screws. WhatWouldAnEngineerDo's PillowBlock can still be used with this remix. BOM: 3x M3x5x6 threaded inserts 3x ISO 4762…
Tiskl jsem z PETG se 100 procentní výplní a 4 perimetry. Jedná se o dočasný háček do zámku dveří u pračky. Např. než dorazí nový náhradní díl. Funkčnost dílu je v pořádku, životnost nemám otestovanou.
Replacement part for Brake Hydraulic Line Clip 13432669 . Original part is cheap but its availability here was like 1 month of waiting. Printed from ABS with 98% infill and insert from TPU. M3x16mm for hinge and M4x10 as locking screw.…
Remixed from a great model uploaded on thingiverse by mjcanton. Use this to attach an Adafruit ADXL343 Accelerometer to your bed with magnets. It works great on springsteel beds for measuring resonances. The mount is compatible with 6mm x…
I could not find a printable STL file to protect my PSOC6 Wi-Fi BT PROTOTYPING KIT (CY8CPROTO-062-4343W) board I use for school. I did in fact found this website were someone makes the case I provide here, but this person didn't provide…
Printing should be straightforward. Wenn inserting the 2mm threaded inserts pay intention and don't heat your soldering iron up to hot, or you will fill the threads with molten PLA. This happened to of friend of mine.
After I purchased and installed this fridge in my apartament it turned out that the stock handle would either collide with the cupboard next to the fridge or, if mounted the other way, collide with the windowsill, making it impossible to…
This is a mount for the ADXL343 to be used on the side of the BRISS FANG GEN2 part cooler fan. I made cutouts for M2 nuts to be placed inside the model. FANG GEN2:…
ORGANIZZATORE GT343 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Replacement connector for the frother head on my Primula Model PR12343 frother/whisk from Canadian Tire.
Stock feet are super fragile and I needed more clearance from the carpet. Tried my best in TinkerCAD. Printed in TPU.
See attached files for all details. PETG Printed with 3 small supports to ensure quality.
Case for WeAct CH343P Category: Electronics
I have an Gorenje WA60085 washing machine, and spring that holds main drum broke which service guy replaced, but there was no original spring holder (it flew into the void :-) ). Washing machine worked but spring was squeaking during…
An Arduino UNO mount for an HP 3435A DMM to enable serial logging/output as a poor man's scope over Excel DataStreamer. See this GitHub repo for more information on how this works electronically. Essentially the goal with this project is…
I have an Gorenje WA60085 washing machine, and spring that holds main drum broke which service guy replaced, but there was no original spring holder (it flew into the void :-) ). Washing machine worked but spring was squeaking during…
This model is compatible with the lego system.
In this case, it's a Precision 3430 SFF. The original PSU passed a way. I decided to make some improvements, such as adding a graphics card, and for that, I needed to replace the ATX PSU. However, since I wanted to install it in a…
A cap to fill in the hole on the sides of the multimeter's plastic case if the handle has been removed. Printed in 2 parts to reduce support mess. Clear the support from inside the 4 holes and any stray printing artifacts. Press fit…
LEGO DUPLO-compatible Brick 2x2 Design ID: 3437 Printing information The STL file is correctly aligned. Layer height: 0.2 mm Perimeter: 2 Infill: 100 % Support: no I am looking forward to your Makes! :-) If you like this design, feel free…
This model is compatible with the lego system.
Replacement cap for Moen Kingsley facet handles. I have painted the model to match my oil-rubbed bronze finish (114343ORB). Used small o-rings I had laying around: 011 Buna-N O-Ring, 70A Durometer, Black, 5/16" ID, 7/16" OD, 1/16"…
This is an adapter to use the Adafruit adxl343 accellerometer on the Flsun V400 head. I adapted another component originally created by danorder (https://github.com/danorder), I personally always leave it mounted as in the photo and when…
20mm large cover to hide the cam-lock screws #113434. Do a test print and see if it fits when printed on your setup. The tolerances are really tight in this application.
Comes complete with all necessary STL files & painted 3MF file. The gears inside turn very easily and are ideal for anxiety and simple fun. Easy to print and build in roughly 5 minutes. Requires a tiny amount of glue and a small…
