P
PrintablesMichael Pine
3Dsets Landy Mini - trailer
Trailer addon for Landy Mini by 3D Sets. It is just a little remix of by markberk from Thingiverse. https://www.thingiverse.com/thing:4656335
- Downloads
- 780
- Likes
- 182
- Rating
- 4.67
Search results: 3dset
Counting matching models…
P
PrintablesMatthijs2101
3Dsets.com Landy Mini Long Trailer + towbar
A trailer for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets Remix of the smaller trailer. For me it was too small and it was too high compared to the car. So I remixed it. Also fixed the…
- Downloads
- 746
- Likes
- 122
- Rating
- 4.94
P
Printablesoutcastrc
Driver and passenger for 3dsets Jeep
Male driver is based off of: https://grabcad.com/library/the-male-figure-carl Female is based off of: https://grabcad.com/library/mulher-sentada-seated-woman-human-person-1 Scaled and modified to fit as a driver and passenger in the…
- Downloads
- 582
- Likes
- 47
- Rating
- 0
P
PrintablesBenny
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 (normal and wagon) & Bamboo
Stand for 3Dsets Jeep Rancher 4x4 & Landy 4x4 & Bamboo 10/2/2020 - addes v2 upper part for much more stability 13/2/2020 - added v2 middle and bottom part, can now be screwed together 2/10/2023 - adde middle R-20 part for compatibility…
- Downloads
- 573
- Likes
- 54
- Rating
- 4.94
P
PrintablesBushi
3DSets Landy "Land Rover" Mud Flaps / Splash Guards
This is a remix: https://www.thingiverse.com/thing:4394842 Mud guard for the front and back of the 3DSets Landy. Logo land rover
- Downloads
- 550
- Likes
- 98
- Rating
- 4.86
P
PrintablesBenny
3Dsets servo arm
15mm is hole spacing 3.10. 2020 - servo arm 15mm 3.10. 2020 - added servo arm 15mm + nut hole 4.10. 2020 - added 20mm version 4.10. 2020 - tooth optimization Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
- Downloads
- 541
- Likes
- 53
- Rating
- 4.33
P
PrintablesMartin
Angry eyes for Rancher jeep from 3dsets.com
Angry eyes for Rancher jeep from 3dsets.com To be glued on top of the default grill Print instructions No tested yet, let me know how it prints and fits
- Downloads
- 458
- Likes
- 35
- Rating
- 5
P
PrintablesCristi D.
Angry Eyes Grill for Rancher 3dsets
Modified front panel so that the angry eyes grill fits over it. Both parts easy to print flat on the printer. Made holes to replace the two upper 3 x 10 mm screws with 3 x 12 mm screws to secure together the angry eyes mask, front panel…
- Downloads
- 458
- Likes
- 36
- Rating
- 5
P
PrintablesMatthijs2101
3Dsets.com Landy Mini Bull Bar
A bullbar for the Landy mini from 3Dsets.com: https://www.prusaprinters.org/prints/41264-landy-mini-by-3d-sets No supports needed, they are pre-modeled in there in the spirit of the Landy Mini model. Just remove them. Print Settings…
- Downloads
- 453
- Likes
- 68
- Rating
- 4.86
P
PrintablesPavel
Beadlock Rims for 3dsets
Designed for GMADE MT-1902, but will probably fit variety of other tires. Rim diameter is 49mm and width is 30mm (+4mm with beadlocks installed). Hardware: 1x SHCS M3x16-25 through the center 21x SHCS M2x6-10 for beadlock 3x SHCS M2x6 for…
- Downloads
- 452
- Likes
- 130
- Rating
- 4.89
P
PrintablesSi1verEag1e
RC 1.9" 105mm FLEX tire inserts (Specially designed for 3DSets Max van )
My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…
- Downloads
- 448
- Likes
- 87
- Rating
- 5
P
Printablesplachytomas.cz
Carl - 3Dsets Model8 Buggster driver
Remix of original model: https://grabcad.com/library/the-male-figure-carl Changes on model fits to seat of 3Dsets Model 8 Buggster his right leg is shorter, fits to pedals right hand on other position brand new ears less belly fat more…
- Downloads
- 448
- Likes
- 56
- Rating
- 0
P
PrintablesBushi
3dsets bambo Front Radiator Screen toyota & blank
Solid layers - Top / Bottom (0 layers) Infill density: 30% Infill type: Honeycomb Perimeters: 2
- Downloads
- 418
- Likes
- 68
- Rating
- 5
P
PrintablesVojta
Open differential for 3Dsets Jeep Rancher
This is open differential for Jeep Rancher from 3dsets. I test it on version Wagon, but should be possible to mount it also on other versions. I created it this open diferencial, because I'm using my Rancher in house on vinyl floor and…
- Downloads
- 384
- Likes
- 103
- Rating
- 0
P
PrintablesJuergen
Front Bumper with 1:8 Warn Winch Mount for 3DSets Landy
This is a Front Bumper for a 1:8 scale Warn Winch for the 3DSets Landrover Defender. Included are two versions. One with holes to mount tow hooks, and one without the holes. Mount the parts as shown on the pictures. You need the Original…
- Downloads
- 375
- Likes
- 67
- Rating
- 5
P
Printables3DPrintSOS
3DSets Landy Wagon Roof Rack with LED Bar
This is a mod that allows you to use this roof rack: https://www.3dsets.com/product/roof-rack-accessory-for-model-4/ on the much larger Landy 4x4 Wagon. You will need at least a 300x300 print plate to print the rack and side rails but I'm…
- Downloads
- 347
- Likes
- 79
- Rating
- 5
P
PrintablesCJ I.
All in One Angry Eyes Grille for Jeep Rancher by 3dsets.com
I found some files for the jeep rancher angry eyes but they were separate and required super gluing or screwing on. I had issues printing these and getting it to look clean due to supports being needed so I combined the two models and…
- Downloads
- 344
- Likes
- 42
- Rating
- 5
P
PrintablesM
3DSets Model 7 Buggy dashboard with colour changes
This is a dashboard for 3DSets Model 7 Buggy designed for a double colour change at layer height. Open the 3MF in PrusaSlicer and press Slice now to see the layers the colours are changed at. Print at 0.15 mm layer height using PLA. Also…
- Downloads
- 342
- Likes
- 71
- Rating
- 5
P
PrintablesMartin
Stand for 3dsets Landy 4x4 Wagon
Stand for 3dsets.com Landy 4x4 Wagon modified upper part for better vehicle balance and better fit slightly wider stand footprint for improved stability Print instructions 0,3 mm layer height, 3 perimeters, 15 % gyroid infill.
- Downloads
- 323
- Likes
- 55
- Rating
- 4.9
P
PrintablesHatrick3D
GMC Grille for 3DSets Model 14 MAX Team Van
This grille is for the 3DSets Model 14 “MAX Team Van” aka the “A-Team Van”. It will replace the Grill labelled “MAX” with the “GMC"-labelled version that you need for the A-Team Van (or any othe GMC Express Van).
- Downloads
- 305
- Likes
- 51
- Rating
- 0
P
Printablespstimpel
Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
- Downloads
- 294
- Likes
- 22
- Rating
- 5
P
PrintablesJSeppl
3DSets Landy Mud Flaps / Splash Guards
Collection of mud flaps for the front and back of the 3DSets Landy. Overview Logo 4x4 Mountain. LandR. Logo. **** Printed with PLA and 0.25 nozzle, color change at 0.65.
- Downloads
- 289
- Likes
- 57
- Rating
- 5
P
PrintablesJan January
Tire model rescuer 3dsets
opona do modelu rescuer 3dsets
- Downloads
- 275
- Likes
- 56
- Rating
- 5
P
PrintablesHatrick3D
Sun Roof for 3DSets Model 14 MAX-Team / A-Team Van
The parts of this mod are a replacement for the “Roof1”-part from 3DSets in case you want to add a sun roof to the Model 14 / MAX-Team / A-Team / GMC Vandura Van. You will need an additional piece of clear plactic sheet for the glass of…
- Downloads
- 272
- Likes
- 44
- Rating
- 5
P
PrintablesRvadrichem
Hood strud for rc car 3dsets model 7 buggy
As I am building the model 7 Buggy from 3Dsets.com, I was missing a hood strut to keep the hood open. This can be handy when working on the receiver, which on this model is located under the hood, or just to keep the hood open when on…
- Downloads
- 266
- Likes
- 156
- Rating
- 5
P
PrintablesThe FuZZ
Blank license plate for 3Dsets Buggy .stp included
I made this blank licence plate as a basis for guys interested in making their own. Step file is included although not sure if I exported it using right preferences.
- Downloads
- 265
- Likes
- 30
- Rating
- 5
P
PrintablesDaniRodes
Smittybilt Bumpers for 3DSets RC Jeep Rancher (Wrangler)
I wanted the same bumpers as my Jeep Wrangler, so I re-diesigned the originals from 3DSets. I also customized the winch, winch hawse, a stronger winch drum and the D-Rings. Printed with Overture Matte PLA with 80% infill and 0,10 layer.…
- Downloads
- 264
- Likes
- 46
- Rating
- 5
P
Printablesplachytomas.cz
Stand for 3Dsets Buggster Model 8 & Buggy Model 7
Print settings 0.2layer Quality profile, printed with PLA. Original bottom part doesn't fits on Prusa Mini printing plate. Model is bigger as maximal size of plate. So, it was little bit redesigned for printing on Prusa Mini. Assembly…
- Downloads
- 262
- Likes
- 50
- Rating
- 4.88
P
PrintablesMartin
3dsets Landy 4x4 front wheelhouses with holes for LED lights
3dsets.com Landy 4x4 and Landy 4x4 Wagon modification for LED lights Wheelhouses - modified original mesh, added 24mm holes for lights Rings - to be used instead of default printed lights, push the LED light into it Print instructions…
- Downloads
- 250
- Likes
- 34
- Rating
- 5
P
PrintablesAhmad
Checkered Plates for Hood and Fenders | 3DSets Landy Mini
INFO Scaled down the original model to fit the Landy Mini, more items like air intake and original model for full size 3DSets Land Rover in the link below. Credit to original creator: https://www.thingiverse.com/thing:4270060 PRINT…
- Downloads
- 245
- Likes
- 42
- Rating
- 5
P
PrintablesBushi
grill gmc for model 14 3dsets
grill gmc for model 14 3dsets
- Downloads
- 238
- Likes
- 40
- Rating
- 5
P
PrintablesMrSnid
8mm to 12mm Hex Adapter for 3dsets Model 7 Buggy
Original file had to much play in the 12mm tire and around the 8mm axel. The updated file fits perfectly snug on the model 7 buggy. Printed with PLA .15mm with a brim.
- Downloads
- 238
- Likes
- 25
- Rating
- 5
P
PrintablesLukáš Foukal
Snowplow for 3dsets Landy 4x4 with height adjust
This print is a continuation of my design from last year . The actual plow is reusable from one to the other, I just fixed a minor issue where it was accidentally slightly angled up on the right side and added the height adjustable…
- Downloads
- 238
- Likes
- 47
- Rating
- 5
P
PrintablesBlackCrow (RockyTop)
3Dsets metal gear axles for Landy Rancher Bamboo Black Crow
!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…
- Downloads
- 233
- Likes
- 76
- Rating
- 5
P
PrintablesTim A.
3Dsets Landy Mini Realistic Towbar + Trailer Coupling
This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…
- Downloads
- 229
- Likes
- 33
- Rating
- 5
P
PrintablesMark Berk
3Dsets Landy Mini addon, Roofrack
My creation of a roof rack, to mount on a 3Dsets Landy Mini: https://www.prusaprinters.org/prints/41264-landy-mini-by-3dsets Print instructions Category: Toys & Games Summary My creation of a roof rack, to mount on a 3Dsets Landy Mini:…
- Downloads
- 226
- Likes
- 38
- Rating
- 5
P
PrintablesJSeppl
3DSets Landy License plates / Number plates
Collection of different license plates for the landy model from 3DSets. Overview Cal01 - 1 Color change. BadNews - 4 Color changes. BLOB Galactic Empire - 1 Color change (BLOB = Big Lump on Board).
- Downloads
- 216
- Likes
- 46
- Rating
- 0
P
Printables3DPrintSOS
3DSets Landy Wagon Rear Hi-Lift Jack Mount(s)
Loved @daver18qc's Hi-lift jack https://www.thingiverse.com/thing:3513415 but needed a way to mount it to my Landy wagon from @3DSets. I made two. One is the "full" mount that replaces one of the hinges on your rear door and holds the…
- Downloads
- 211
- Likes
- 65
- Rating
- 5
P
Printableswolffman
3DSets Landy 4x4 Wagon Switch board for QuicRun WP10BL30
can be printed without supports in PLA and be connected on the pins with glue
- Downloads
- 209
- Likes
- 36
- Rating
- 5
P
PrintablesTheLordzofmafia
Wheel 2.4 beadlock MAX TEAM 3dsets
Koło 2.4 beadlock MAX TEAM
- Downloads
- 208
- Likes
- 36
- Rating
- 0
P
Printables3DPrintSOS
3DSets Landy Wagon + Ranger 4Door Rear Link Slider + Brace
Had an issue with my Landy Wagon where my links were flexing when crawling. Sometimes this caused the axle to shift and move the tires into the wheel well causing issues and binding. This is a tool-less, snap-on, solution. These sliders,…
- Downloads
- 196
- Likes
- 58
- Rating
- 5
P
PrintablesJan January
3dsets belt model14 max HDT 144-3M-06
pasek do modelu 14 3dsets HDT 144-3M-06 drukować z tpu
- Downloads
- 196
- Likes
- 28
- Rating
- 0
P
Printablessoulrider911
3dSets Landy Headlight Lens and Headlight for LEDs
Needed a Headlight lens and headlight bowl (modified) with a 5mm hole for leds the 3dSets Landy build. Print with the dome facing up and use supports. You need a small CA glue dab to attach it to the inner headlight housing.
- Downloads
- 196
- Likes
- 31
- Rating
- 5
P
PrintablesJan (Sláva) Slavík
Rancher grill 3dsets
Na fixaci dílu používám trochu lepidla, ale není to nutné.
- Downloads
- 194
- Likes
- 36
- Rating
- 5
P
PrintablesThe Doctor
Sprintstars Wheels for 3DSets Model 7/8
Print Settings Printer: Prusa i3 MK3S Rafts: No Supports: No Resolution: .15 Infill: 15% Others: 9x screws M2x6
- Downloads
- 187
- Likes
- 55
- Rating
- 5
P
PrintablesSteve Eckerlein
3DSets - Landy/Rancher/Bamboo - GT2 Belt Gearbox (with metal pulleys)
GT2 Belt Gearbox for Landy/Rancher/Bamboo 3DSets models. Use it with my Metal transmission, gears and axles mod This gearbox has a ratio of 4:1. Paired with the AR44 33/8T gears, it is the same overall ratio as original 3DSets model. You…
- Downloads
- 184
- Likes
- 70
- Rating
- 5
P
PrintablesBlackCrow (RockyTop)
Steering Servo shim spacer 3dSets Bug
Steering Servo Shim If using on 3Dsets Sandy or Bug you might want to upgrade the steering horn too. See this upgrade. https://www.printables.com/model/321649-3dsets-bug-steering-fix
- Downloads
- 182
- Likes
- 44
- Rating
- 5
P
PrintablesMarkus_p
3DSets Headlight lens for Model 7 Buggy
Front headlight lens for Model 7 Buggy from 3DSets
- Downloads
- 182
- Likes
- 42
- Rating
- 5
P
PrintablesLukáš Foukal
Snowplow for 3dsets Landy 4x4 (old)
This model is now depreciated, please use the new one . Are you tired of clearing your driveway by hand? Is it too small to justify a snowblower or other full scale device? Well now, it can take you twice as long, using your RC. This…
- Downloads
- 180
- Likes
- 37
- Rating
- 0
P
PrintablesJSeppl
3DSets Landy Spare wheel carrier
Spare wheel carrier for 3dsets landy. Printed in Prusament PLA with 0.25 mm nozzle. -- Note on the rear bumper and on the right rear fender, holes must be 1.8 mm. Screws needed: 8x M2x6 2x M2x10
- Downloads
- 177
- Likes
- 39
- Rating
- 0
P
PrintablesKnur
3dsets Tube Doorstep for Rancher Wagon
Model is designed from scratch, based on Tube Doorsteps for Model 1 & 2 Required screws for assembly: 8x M3x10 2x M3x8 (rear screws) Intended to look good with accessory Tube Fender Flares for Model 1, 2, 6 , but it will fit with the…
- Downloads
- 177
- Likes
- 35
- Rating
- 5
P
PrintablesJoJo
3DSETS Landy Mini Vented Hump Bonnet (Hood)
A different bonnet for the Landy Mini, pimp your landy. Print at whatever works best for you.
- Downloads
- 177
- Likes
- 23
- Rating
- 3.5
P
Printablesawestphalphoto
3dsets 3-hole Belt Drive Motor Adapter
This is another make of the 3Dset's Belt drive motor adapter. I found some makes already available, but the mount hole spacing on the motor I used (FlashHobby D3630 EVO “Turbo”) did not fit the holes in the other makes, so I made a new…
- Downloads
- 176
- Likes
- 23
- Rating
- 5
P
PrintablesMac
3DSets Rancher Segment Back Lights
Modular segmented back light for Rancher from www.3Dsets.com
- Downloads
- 176
- Likes
- 46
- Rating
- 5
P
PrintablesBenny
3Dsets Landy 4x4 light cover
New light + cover. You print the cover from transparent filament. I used Nebula natural. Spectrum alu silk was used for the light
- Downloads
- 174
- Likes
- 43
- Rating
- 5
P
Printablesmatej olle
Rear tire Buggy by 3dsets
Rear tire Buggy by 3dsets. I used filament TPE88 from Filament PM. Infill: On the sidewalls of the tire, I've used the modifier and infil straight line 8% Tread use infil 0% Supports: No Rafts: No Resolution: 0,2mm Perimeter: 2
- Downloads
- 173
- Likes
- 36
- Rating
- 0
P
PrintablesStefi
3Dsets buggy servo adapter
Servo arm remixed from https://www.thingiverse.com/thing:4834035 to fit different part supplied with servo. Also little bit shorter to be sure that steering rods won't touch front axle parts and also mounting holes for steering rods are…
- Downloads
- 168
- Likes
- 33
- Rating
- 5
P
Printables3DPrintSOS
3DSets Wheel Spacer & Rotor
This is a spacer used on models from 3DSets.com (both Landy and Rancher) to move the wheels and tires outward. Making a wider stance and moving the wheels away from the shocks. Giving you more shock options, more potential for…
- Downloads
- 167
- Likes
- 49
- Rating
- 5
P
PrintablesRuneLS
3DSets Landy 3 and 5mm LED mod
I modded the lights for the Landy to fit 3 and 5mm LEDs that come in most RC light kits on aliexpress.
- Downloads
- 164
- Likes
- 35
- Rating
- 5
P
PrintablesKnur
Fuel tank battery compartment for 3DSets Bamboo (Model 13 - Winch Truck)
This model allows using bigger 3S2P custom battery packs made from 18650 cells in the 3DSets Bamboo (Model 13 - Winch Truck), model available on their site: https://3dsets.com/product/model-13-bamboo-4x4-winch-truck/ Side fuel pipes are…
- Downloads
- 163
- Likes
- 52
- Rating
- 4.8
P
PrintablesSimTechRC
3DSETS Beadlock Landy classic rims
I recommend to print it with 100% infill
- Downloads
- 160
- Likes
- 42
- Rating
- 5
P
PrintablesDaniRodes
Front and rear LED lights for 3DSets RC Jeep Wrangler (Rancher)
FRONT LIGHTS: I used silver filament for the light and black for the shape. Transparent filament for the turn signals. Then I cutted 2 circular shapes from the plexiglass used for the glasses of the model. BACK LIGHTS: I used black…
- Downloads
- 160
- Likes
- 35
- Rating
- 5
P
Printablesikletti
Roll Cage for 3DSets Bamboo4x4
The real stuff For my Bamboo4x4 I wanted a fully functional roll cage just like the 1:1. This is it. The cage fits the Bamboo4x4 Model 9 & 10:…
- Downloads
- 158
- Likes
- 38
- Rating
- 5
P
Printables3DPrintSOS
3DSets Landy Radiator Fan Adapter - 40mm fan
Needed more cooling for longer drives. I actually saw somebody post something similar but using a hacked stock radiator. Figured, there's a better way! Enjoy and Post your makes! The fans I used:…
- Downloads
- 153
- Likes
- 44
- Rating
- 0
P
PrintablesMartin
3dsets Model 7 Buggy aluminuim servo arm adapter
I had problem with original 3D printed servo arm slipping from the servo, that's why I made this adapter for the aluminium servo arm. You will need aluminium servo arm 25T, see attached image. Supports are already built in, don't forget…
- Downloads
- 153
- Likes
- 24
- Rating
- 5
P
PrintablesSteve Eckerlein
3DSets - Landy (and others) - Mod - Metal transmission : shafts, gears and axles
Modifications to 3DSets Landy Wagon (and other 3DSets models) to go to metal transmission from gearbox to wheel, using Thumper axles Use in combination with Gearbox with 3D Printed pulley and Metal output GT2/Metal pulleys gearbox UPDATE…
- Downloads
- 149
- Likes
- 61
- Rating
- 5
P
PrintablesFat_tommy
3Dsets Bamboo Landcruiser Toyota Mud Flaps
Made to fit the Bamboo Land cruiser. May fit others. Color change G Code below
- Downloads
- 147
- Likes
- 29
- Rating
- 5
P
PrintablesRvadrichem
Exhaust for 3Dsets Buggy model 7
Although I was okay with how the original axhaust looked, it broke when I rolled the car (flipped it at it's maiden drive outside). So I designed this alternative exhaust. It has a classic and robust look and it fits withing the engine…
- Downloads
- 146
- Likes
- 51
- Rating
- 5
P
PrintablesMark Berk
3Dsets Landy Mini addon, Trailer + Towbar
Created a Towbar and a trailer for a 3Dsets landy( https://www.prusaprinters.org/prints/41264-landy-mini-by-3dsets ) Towbar is the same as for playmobil car. A playmobil boat fits(clips on) on the trailer. Print instructions Category:…
- Downloads
- 145
- Likes
- 41
- Rating
- 5
P
PrintablesSimTechRC
Waterproof Receiver Box for FlySky FGR4v2 suitable for 3DSETS Landy and other models
To make it waterproof. I recommend to add silicone (as example Done Deal) on all adjacent surfaces, and to the wires under the small cap. Use it on your own risk! PS: parts are very stiff to connect. Its important for better waterproof…
- Downloads
- 144
- Likes
- 18
- Rating
- 5
P
PrintablesMarkus_p
3DSets Headlight lens for Model 11 Sandy
Front headlight lens for Model11 Sandy from 3DSets
- Downloads
- 139
- Likes
- 29
- Rating
- 5
P
PrintablesBenny
3Dsets Skippy Boats ESC switch holder
3Dsets Skippy Boats ESC switch holder for QuicRun WP 16BL30 req. 3x M2x6 socked head screw 10.11. 2023 - added holder WP 16BL120
- Downloads
- 137
- Likes
- 27
- Rating
- 5
P
Printableschipmen
Alternative engine for 3DSets Buggy & Buggster
Some friend ask me for helping to more durable of often broken original parts. I completely new designed the engine block. I transfered most of power trans pieces to steel or aluminium. Durability is more, more better. Constructed for…
- Downloads
- 135
- Likes
- 29
- Rating
- 0
P
PrintablesTomTLC
FRONTLIGHT GLASS FOR 3DSETS BAMBOO RC CAR
Simple Frontlight Glass for 3DSets Bamboo Rc Car. Depending on your printer it should snap in place. Might need a superglue. Use concentric top & bottom layers for more realistic look!
- Downloads
- 134
- Likes
- 32
- Rating
- 5
P
Printables3DPrintSOS
3DSets Rancher Beadlock Tire Lock Ring (2 Options)
My tire kept slipping on my rim with my Rancher wheels and Super Swamper tires. These rings help you "lock" the tire in place. There is also an option to use M3 nuts as weights — 48 per lock ring. Enjoy and post your makes! If you found…
- Downloads
- 133
- Likes
- 42
- Rating
- 5
P
PrintablesBenny
3Dsets Jeep Rancher 4x4 Light with hole for 5mm led
3Dsets Jeep Rancher 4x4 Light with hole for 5mm led Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 25% Filament: Inland PLA Black/White Category: R/C Vehicles
- Downloads
- 133
- Likes
- 26
- Rating
- 0
P
PrintablesDaniel Hošek
Headlight for JEEP Wrangler JL 1:8 (3Dsets.com)
Before installation can be equipped LED in the headlights: I printed the models "Front light - left.stl" and "Front light - right.stl" with holes 5 mm (corresponds to the size of my LEDs). I respect the model license (model purchased on…
- Downloads
- 129
- Likes
- 30
- Rating
- 5
P
PrintablesHemi
3dsets Rancher stronger Ball joint for M5 threaded arm
Work in progress changed to READY TO MAKE! - 5.11.2020 Print, assemble, ENJOY Share your feelings down bellow in comments :) If you like it, you can support me with cup of coffee…
- Downloads
- 123
- Likes
- 24
- Rating
- 5
P
Printableswolffman
3DSets Headlight modification for LED Light
This is the headlight from the 3Dsets models with a hole in it for a LED light. It works really well with this lens: https://www.printables.com/model/237490-headlight-lens-cover-for-the-3d-sets-landy/comments/454368# Print in Silver Silk…
- Downloads
- 119
- Likes
- 44
- Rating
- 0
P
PrintablesMarco
3DSets Model 1/2/6: Rancher 4×4 Türen
Ich habe für mein 3DSets Model 6 ein paar neue Türen entworfen. Die Fronttüren davon sollten auch bei Model 1 & 2 funktionieren. Damit der Spiegel besser passt habe ich auch die Original Spiegelhalterung angepasst.
- Downloads
- 119
- Likes
- 35
- Rating
- 5
P
PrintablesMichal K
3DSets Ball Joint Remover
I realised that the printed ball joints for my Bamboo Toyota FJ40 are too big. However, I have installed them all. Now I need to remove them and install a smaller - scaled ones. This is the tool to uninstall them with vice or hammer. No…
- Downloads
- 117
- Likes
- 40
- Rating
- 4
P
PrintablesHatrick3D
Africa Trophy Bumper with 1/8 Warn Zeon Winch Mount for 3DSets Landy
Modified Africa Trophy front bumper with larger winch mount to fit an RC4WD 1/8 Warn Zeon Winch.
- Downloads
- 116
- Likes
- 25
- Rating
- 0
P
PrintablesMC1457
3DSets 2.2 Wheel B Modifications
Here are some modifications I put together to widen the stance of the Wheel B set for the 3D Sets Buggy. Spacer: Makes the front wheels a bit wider and grips the foam tire core for less lateral tire movement. The goal was to stop the…
- Downloads
- 114
- Likes
- 43
- Rating
- 0
P
PrintablesBlackCrow (RockyTop)
3Dsets Buggy Sandy steering fix
If you are like me you love the 3dsets Bug but hate the easy to break steering. There are other fixes here on the site and I have tried them. Here is one that works using parts that you likely already have. The steering servos that I buy…
- Downloads
- 112
- Likes
- 45
- Rating
- 5
P
Printablesspeedysk1
3DSets model 7 buggy headlight lens
I created these headlight lenses for the model 7 buggy. I also installed LED lights in and so these will fit with LEDs. I created 2 designs, one flat backed and one concaved. I was able to use the flat ones with my LEDs, but YMMV. Enjoy!…
- Downloads
- 111
- Likes
- 16
- Rating
- 4
P
Printableswolffman
3DSets Landy 4x4 Wagon Rear Wheelhouse holes for LED lights
Rear wheelhouses for the Model 5 Landy 4x4 Wagon that has holes for led lights This has the openings for all the rear lights of the Landy model Print on .20 resolution in black PLA. No supports needed as per original design by 3Dsets
- Downloads
- 110
- Likes
- 33
- Rating
- 0
P
PrintablesBenny
3Dsets Landy 4x4 Wagon ESC switch holder
3Dsets Landy 4x4 Wagon ESC switch holder for QuicRun WP 16BL30
- Downloads
- 110
- Likes
- 24
- Rating
- 5
P
PrintablesPhenix2984
3Dsets Landy Beadlock
Issue at first run: tire pops out of the rim. I create this simple cylinder, in order to put it inside tire and lock it into the wheel when screwing the rim. (It press the tire between internal beadlock and rim). Not miraculous (still…
- Downloads
- 108
- Likes
- 21
- Rating
- 5
P
PrintablesMarkus_p
3DSets Side grille for Model 6 Rancher (Jeep)
This is a side grille for Model 6 Rancher from 3DSets . Use 4 Screws M2x8 and screw it into the side panel.
- Downloads
- 108
- Likes
- 33
- Rating
- 5
P
PrintablesHatrick3D
EU License Plate Holder for3DSets Landy
This is a resized license plate holder to fit EU-size rear license plates for the 3DSets Landy
- Downloads
- 107
- Likes
- 23
- Rating
- 5
P
Printablescoryflucas
3dsets Model7 Buggy servo arm adpter
Remix of this Model7 Buggy servo arm adapter to work better with the servo horns I purchased on Amazon : https://www.amazon.com/dp/B07D56FVK5. Changes: Holes for mounting the servo arm increased to 3mm Center hole enlarged to allow…
- Downloads
- 107
- Likes
- 18
- Rating
- 0
P
PrintablesMarco
3DSets Model 6: Rancher 4×4 Wagon Haube
Ich habe mir für meinen 3DSets Model 6: Rancher 4×4 Wagon die Haube etwas angepasst. Die Haube hat Einlagen für die Lüftungsgitter. Für eigene Anpassungen habe ich STEP Dateien beigefügt.
- Downloads
- 105
- Likes
- 24
- Rating
- 5
P
Printablesu01pei
3dsets Buggy motor spline
The motor I purchased did not fit the spline that came with the Buggy print files, so designed a new one. Spline is 22mm tall with base. Spline length itself is 17mm. The 3 holes are equally spaced.
- Downloads
- 103
- Likes
- 28
- Rating
- 5
P
PrintablesMarkus_p
3DSets Exhaust for Model 7 Buggy
The original exhaust was too long for my taste. Therefore I've created a shorter one.
- Downloads
- 103
- Likes
- 24
- Rating
- 5
P
Printablesawestphalphoto
3dsets Wheel C for 44mm ID tire
I scaled down the outer edges of the 3Dsets' Model 5's wheel type C, to fit tires that have a 44mm inner diameter, which are usually used for 1/14 scale semi truck models. These will give the 1/10 or 1/8 scale vehicles a more “stock”…
- Downloads
- 103
- Likes
- 23
- Rating
- 0
P
PrintablesSpiderz Hobbies
3DSets CV Boots for most 3DSets models
3DSets vehicles are awesome, however the open CV axles have to be greased to prevent wearing out the connection, These boots are designed to protect all the open CV (universal) joints by allowing you to stuff them with Grease and not…
- Downloads
- 102
- Likes
- 33
- Rating
- 5
P
PrintablesElg
3dsets ball joint press remover/inserter
The frame would be printed as shown in attached picture. I used 6 perimeters, 50% gyroid infill. Printed in PLA. Thread has a clearance, printed on my mk3s+ and I didn't have any problems to install the screw. The frame is capable of…
- Downloads
- 101
- Likes
- 19
- Rating
- 5
P
PrintablesDaniRodes
Hood Details for 3DSets RC Jeep Rancher (Wrangler)
I wanted to add some more details to my model, so here's what you'll find: -Hood Flap: This is the hardest part to print, I failed a lot of prints before make it. Print it slow with raft and support, 100%infill and 0,1 layer. In the…
- Downloads
- 97
- Likes
- 18
- Rating
- 5
P
PrintablesTheDIYGuy999
Servo arms, brushless motor pulley and headlights for 3mm LED for 3Dsets model 7 buggy
Material: Servo arms ESUN PLA+ Headlight Reflectors Filamentum PLA Headlight Glass & Motor Pulley PETG (100% infill) The motor pulley consists of 2 parts in order to make the drive more silent. The Fusion 360 file is provided as well in…
- Downloads
- 97
- Likes
- 22
- Rating
- 0
P
PrintablesMC1457
3DSets 2-piece brake rotor and hub
Wheel hub spacer for Rancher or Landy. Pushes the wheels 11 mm further out and adds a nice 2-piece disc brake rotor because racecar. Hubs must be printed with supports. Print the rotor in silver and the hub in black...or orange...or pink.…
- Downloads
- 96
- Likes
- 32
- Rating
- 0