Counting matching models…
This set includes screws, nuts and washers of all kinds ISO 4017 DIN 933 With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5 The screws are…
________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
This is a simple honeycomb fan grill for 40x40mm fans, as they are typically found on consumer grade 3D printers.
Collection of screws (ISO 4017 / DIN 933) including : M3x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
MK15.1 is the latest and suggested version to use, the other versions may not work as expected but have been left here for users that already have the previous versions and want to print it again. Hexagon Pattern can be printed with two…
Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Collection of screws (ISO 4017 / DIN 933) including : M6x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
4010 Mount for Ender 3 v3 se
Simple model of fan cover with voronoi style. Space between fan and tall fan covers might help with noise reduction, i haven't really tested it.
config file for using the fan to cool a Raspberry pi on Klipper [temperature_fan Raspberry_Pi] ;## Connect Raspberry Pi Fan in LED-G position pin: PB5 max_power: 1.0 shutdown_speed: 0.0 cycle_time: 0.01 hardware_pwm: false…
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Collection of screws (ISO 4017 / DIN 933) including : M8x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the…
Thule Fold Lock Anchor 40107011 For Urban Glide 2, Glide 2 a Urban Glide 2 Double.
This is a snap-in mounting block designed for mounting Wago 221-2401 inline splicing connectors. It does not include any extra holes or other features for mounting. It is recommended that you import the STEP into your CAD software of…
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
Description I was looking for a holder/spacer for a Lifepo4 battery set based on EVE 40135 cells. So no models were found and I decided to build my own. The model consists of 2 parts: a holder with additional places for busbars or wires…
FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
Collection of screws (ISO 4017 / DIN 933) including : M4x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Description I couldn't find a good case for the Raspberry Pi 4 that had all the features I wanted, so I decided to make my own. Here's what makes mine unique: Held together with screws. Snap-fit cases are great if your printer is REALLY…
Introducing the Mount for the Dual 4010 Blower and 4010 Hotend Fan. 🛠 Features: Purpose-built for accommodating the dual 4010 blower and 4010 hotend fan, ensuring efficient cooling. Final version got kitty ears :3 📏 BOM: 4x M2 nuts 2x M3…
BTT SKR Mini E3 4010 Fan holder. (For voron V0.1 or other printers) -3x M3x25 Screw for board and holder. -2x-4x M3 Screw for fan fix (length depends on the fan) -Ink. STP Assy. for Remix. I use for V2 but its work with v1.2 and v3 also.
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Is your 2150 fan dying and needs replaced? Is the cooling system for the hot end “inadequate” for you? Well, here's you're solution. It's designed around my other fan shroud , but made for this use case. I went through one prototype that…
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…
Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…
Detail printing by entry down with supports. Layer height 0.2 mm Nozzle 0.4 mm
Later edit: I have added a 20mm tall version i prefer the 25 because i can easily remove/insert the Neopixel and Det Plug for the 20mm version you will need M3x25mm instead of M3x30 If you want to but this Board here is an affiliate link…
V1.1 Update: Redid some of the geometry at the front, modified the back for better and more enclosed hotend and cooling air separation and for better cable routing. It's a remix of the miniSatsana fan duct and hot-end cover for the Ender…
ok i have fixed the old versions flaws and now this works great. make sure to have the fans blow away from the board. the MCU fan now blows out the original hole. you can make these changes in your printer.cfg to have the fans use PID.…
It's simple and looks not that bad. Print this in PETG/ASA/ABS Supports are required. Layer height 0.2mm Cooling is not the problem. Feel free to remix this or ask for modifications. PS: I will add photos when I get home. I was running…
After realizing my factory fan duct was broken I quickly drafted this replacement fan duct up to get back to printing. I am currently testing this in PETG (ABS recommended) and will be providing a couple of improvements soon. I will…
Simple fan mount replacing the whole Ender 3 V3 KE extruder housing, while improving on it by including a bigger 4010 fan. It's designed to be printed easily, without unnecessary overhangs, at the expense of some additional weight and…
This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.…
Replacement blades, in the style of the T33.
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
Collection of screws (ISO 4017 / DIN 933) including : M10x 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle. I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup). If you print from ASA/ABS remember to scale model for…
Universal (fits both L&R sides) front and rear swingarms for 144001 as well as new from the ground up front steering hub. Each part is tested to fit, installed on at least 1 car and driven for at least 1 full battery charge. Recommended…
First of all: What is this about? I really like the look of the Mini Stealhburner, but I dont like its weak cooling performance on my Voron 0.2. This printer is capable of printing fast - especially with a CHT nozzle. But overhangs,…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
The original design has a large flat bottom, which for some reason would always sag downwards for me, sometimes colliding into prints. This remix minimizes that bottom surface such that the sag points are eliminated. The bottom is also…
2025/10/17 v4.0 Update: Make the ridges on the cap smaller so it would close shut without bulging. ----------------------------- 2024/10/09 v3.0 Update: Add ridges to the cap so it won't pop out. Enlarge trim-pot holes and merge them…
I wanted to use the Dual 4010 blower version of the Mini Satsana duct on my Ender 3 V2 but I couldn't find a remix that had converted it to be compatible with my printer so I made it myself. I also made it height adjustable to allow…
I wasn't happy with the 4020 Noctua fan, so I decided to use the 4010 that came from the part cooler on the hot end. It's a lot more tolerable than the stock fan, and will be a good upgrade for anyone that has an extra 4010 fan laying…
The ENDER 3 VE SE Dual Fan Project. Hi everyone, As I was looking at my Ender 3 V3 SE, I got the feeling than the original fan shell was too common and lacking some originality. As I also had another brushless Creality 4010 fan as spare…
I tried a lot of fans and fan mounts for part cooling for the BIQU H2 on my Ender 3 - nothing worked really So i designed this 4010 radial fan mount. It is simple and works. i also designed a fan shroud fitting this setup. Note on BIQU H2…
This design is a simple fan duct made for the BIQU H2. It mounts on the front of the extruder itself and is very simple. The duct is fixed position, as this is just easiest for me to design - please feel free to comment if you have any…
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Source file: https://cad.onshape.com/documents/6d2b5ab70346f30288cee4bc/w/581da15e481f8d17d003e36b/e/63c9a12203e9ab6971e0f0a6?renderMode=0&uiState=62ba698e4404174302000963 Small change to the v4. The slice engineering mk8 heat break was a…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
Print in PETG, 0.2mm layer height, no support required. Press fits nicely. Do this mod at your own risk. :) (Optional but recommended) Carefully push the fan blades from both sides to remove the fan blade rotor from the casing. Cut all…
Introduction: The design was made to be aesthetically pleasing, offer improved part-cooling while also supporting a BL-Touch or CR-Touch ABL. It is a replacement for the stock cooler however will require an additional 4010 blower. NOTES:…
I loved the minimal footprint of the original eB shroud, but was still having trouble with one-sided cooling. This remix adds a second fan and moves them to either side, with the same core designed by gibbed. No supports needed 25 grams…
This is a Case for the XL4016 Step-Down Converter. The circuit board size is 65x36,5mm. The holes for the screws have a distance of 58 mm at the longe side and 26mm at the short side. The diameter of the hole is for 3x7,5mm sheet metal…
ISO 4017 Bolts M12 - M36 / Length 25 - 200
I am not responsible if you break your printer for any reason using this shroud. If you require a shroud that works with the stock configuration please check out my single fan shroud here;…
Since I wasn't able to find any model that fits on the stock ender 3 fan, I've designed this model to replace the blades of the stock fan, it fits with pressure and works pretty well. Just be sure to rip everything from the broken blades…
You want to use the angled fan mount for the Ender 3 V3 SE but cannot use them because you have the newer version that does not have the side extractor screws? Now you can. Using the low profile bracket to screw into the heat sync, I…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
Dies ist ein einfaches Gehäuse für das hier beschriebene XL4015 Step-Down-Modul: https://www.electroschematics.com/dc-module/ Es enthält eine Zugentlastung und Lüftungsschlitze. Ich benutze es, um einen Dell Wyse 3040 vom Druckernetzteil…
After driving through fresh snow I found the car full of snow… there was a huge gap between chassis and body shell. This model closes these gaps. Printing PLA+, snug support, see 3mf file attached, Any other material may work, too.…
Dual 4010 fan duct for E3D v6 setups Optimized for ease-of-use and broad compatibility with different setups. If you have any requests or suggestions, leave a comment and I'll see what I can do! Features: - Unobstructed front, so you can…
Author : Mikael70 Link : https://www.thingiverse.com/thing:4270395 Thanks to Mikael70 for his work and sharing.
Aim to add a 4010 fan on the ptfe hole to get better drying performance Use the 5.5*2.1 DC Power splitter to get power for the fan from the origin power supply BOM 5.5*2.1 DC-022B Female Jack…
Based on the ingenious design by [jwags55](https://www.thingiverse.com/jwags55). This remix is designed to fit standard 4010 fans (with or without built-in nut traps). It should be a tight fit on 35mm DIN Rails and hold the fan securely.…
The holder for my BIP&GO has been lost so I made a new one Use PETG with organic supports to print I used an 0.6mm nozzle with 0.3mm
This bracket was designed to mount a 40x40x10mm fan onto the SKR Pico board, compatible with RPI3, RPI4, RPI5. Use 4 BHCS M3*14 screws and nuts to mount the fan on the bracket, and then install the bracket on the motherboard with M2.5 or…
Updated: MMU version so you can print the Voron logo in-place. Follow this guide to calibrate your printer to do it Updated: Faceplate now can support both 3010 and 4010. Put heated inserts in the correct location depending on what fan…
Personal Test. Needed to transfer/upload files :)
A simple tool to determine the thread size based on the hexagon of the screw. Works with ISO 4014 and ISO 4017 metric sizes.
I'm really like the original miniSatsana Light, but the design interfere with BLTouch steel-mount from Creality that already attached to my Ender3v2, rather than messing with BLTouch offset, I remix the original design so it can be use…
I was struggling to get the chamber temps up in my Voron V0 and research led me to the use of bed fans to help circulate and distribute heat from the bed. There were not a lot of options for the Voron V0 with Kirigami bed so I decided to…
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
This is a mod of the Mini-AfterSherpa to mount 2 4010 fans. To get it to fit onto the x carriage some plastic needs to be removed around the side and bottom of their insets on the x carriage. The fan ducts some filing and superglued in…
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Screw Driver…
This is a quieter, lighter, and smaller (in every direction) fan shroud than the stock shroud for the Ender 3 V2. I really liked the design of Printercat64's fan shroud , but when I tried to fit it on my printer (even after modifying the…
Bigtreetech Octopus cooling 4010
Mount your WAGO inline 221 series lever nut connectors. The mount is designed to hold (3) side by side, which is useful for brushless motors. You can print the included clip, or use a zip tie to hold them down. Either option allows the…
This is a little optimization of the original setsana - mini remix. I removed the the bridge between the two fanduct to have a better view of hotend. This mod keeps all advantage of setsana fan duct more: -4% of material -3% print time…
The STL is only for the right side. You need to mirror it in X direction to get the left side too. You only need two M3x8mm screws. printed in ASA weight is ~3,2g
Its a adapter for 3010 fan to fit in 4010 fan enclosure. Increase wall count for the screw to fit tight. Fast print and no support needed.
It has been designed for 4020 radial fan and stock fan shroud of ANET ET series. You need 2 M2*20 screws.
I created case for XL4015 converter, because I cannot find anything suitable. It is for this converter: https://www.aliexpress.com/item/32830922824.html DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015 Don't require any…
Original Model's Issues I really liked the original Satsana remix that Kenny did in the form of the Mini Satsana, but I found the BL Touch mount made for it functioned really poorly for me in two major areas: I found that the mount could…
The new slim K1 shroud now supports my improved fan ducts (finally managed to learn how to do that). Print the ducts in PETG, ABS or ASA. The shroud can be printed in what you want, maybe not flexible filaments :) -BOM: 10x M3*8 Screws 8x…
4010 format cooler holder for cooling the extruder motor to solve the known problem of overheating and jamming of the rod. It features convenient installation - without the need to remove the filament and reinforced side holders. Printed…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Gyroid Filament brand: ICE Filaments Filament color: Red Filament material: PLA Notes: "Support overhang angle" set to 88 degree…
For this Remix you can follow the Assembly instructions of the Original Design. This set will only replace 1:1 the parts from the original with the ones from here. The Center Carrier of this set provides an additional advantage over the…
this is a fan blade for 4010 size creality fan…
