Counting matching models…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
*EDIT Some people ding the design to not fit exacly from what i found out not all 40x40/80x80 frames are exacly those dimensions i based the design on a Simlab frame. I took over my sim rig from a friend, but it was missing a few end caps…
What's this? As seen in my FormD T1 v2.1 video , this anti-sag bracket secures the 4080 or 4090 Founders Edition stock air cooler and eliminates sag. Configurations supported: 3 slot 3.25 slot 3.25/3 slot (top strut in 3.25 slot + 5mm…
This model is compatible with the lego system.
"20th Century Fox" (https://skfb.ly/6W9rH) by toiam408 is licensed under Creative Commons Attribution (http://creativecommons.org/licenses/by/4.0/).
Hello guys, this is a Fanatec clone designed base setup for the FFBeast wheel DIY project. On the backplate i used a XT60 socket and a Type-C USB port. I have a 2080 aluminium profile version too but i need a little time to finish it.
This model is compatible with the lego system.
Easy model to secure cable width a ziptie or a strap to extrusion profiles. Just rotate 90° the part into the profile and you are ready to fix the cables.
Needed cable clips for my Next Level Racing GTELITE. Found one I liked but it didn't fit my 4040 profile, so I made my own from scratch, copying the same basic shape.
Made it heavier and bulkier and modified the orginal to be suitable for T-slot 4040 and 4080 used for most simrigs. the longer ones are real nice to cover up the cable completely print them all standing up (I used petg)
Remix of https://www.thingiverse.com/thing:6060534 so it fits on an E53 X5
Just easy keyboard stand with prepared holes to mount sim rig or elsewhere. I printed it with PETG and 4 perimeters. In slicer mirror model for right side. Please share your 3D Prints. Thank you 🙏
Flexible cable management for xx80 profiles. 200mm, 100mm, and 50mm for varied run lengths. Mostly intended for simpits but anything that uses xx80 profile and has cables can benefit. Saw a few other models for different profile sizes…
This is a set of different supports and braces that can be used to prevent sagging of RTX 4080 & 4090 Founders Edition GPU's in the FormD T1 v2 (and v2.1). The two braces (short & long) attach to the case spine and provide support for the…
New bracket for v2.0/v2.1 What's this? This is a PCI Rail attachment that I made for the FormD T1 v1.1 case, to be used with the RTX 4090 (and 4080) Founders Edition graphics cards only. It uses the existing SSD mounting holes of the T1…
Sim racing rig made with 4040 and 4080 aluminium profile and tripple monitor stand Category: DIY
This is a cable clip for a 4080 simrig to hold the larger cable sleeve. It clips onto the rig and stays put. Very small and fast to print so you can print several to help you guide the cable sleeve around your rig.
Versions: There are two versions you can download - one for sockethead screws and one for countersunk screws. The sockethead version will lock the hub in place with the screwhead. The coutersunk version wont. BOM: USB-Hub:…
This model is compatible with the lego system.
This model is compatible with the lego system.
This simple holder will clip into a 4080 groove and will help support any device. I use it to keep the PSU in place (check photo) and the larger one to keep the portable keyboard.
Stepper Motori. Serie 17HS2408 - 17HS3401 - 17HS4401 - 17HS8401 - 17HS6401. Creati con solidworks con passaggio semplificato*. per le misure complete consultare il file in allegato Step motor_datasheet.jepg Sono inclusi file solidworks…
Aluminum Extrusion -4080 European Specifications
This is a simple mount for the Gladiator NXT to attach it to 4080 or 4040 profiles as used in Simrigs or table mounts. It substitutes the original baseplate. If used in connection with my side covers this can reduce the width of the base…
The GPU mount uses the 4080/4090 Founders Edition M3 threaded holes hidden underneath the magnetic cover located at the front end of the card. The bracket attaches to the fan/radiator bracket of the Ncase M2 with M5 self-tapping screws…
BOM: Printed with ROSA3D High Speed PLA Signal Violet This is a universal 3-slot end cap for 4080 T-slot aluminum extrusion profiles , designed to securely cover the profile while keeping one rail open for functional access — perfect for…
Update 2: Over Christmass break I was able to button up everything. Sadly I couldn't get the encoder to work (my encoder was not working correctly, the design is not the issue), so I switched to Tig33r's magnetic encoder design. Now…
lego 4081B (Modified 1x1 With Light Attachment)
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case. Since the case is pretty compact I had to make some compromises. Also, It is possible it will not fit for you if you have, for example, a…
Winwing Takeoff Panel 4080 aluminum profile mount using M8 bolts and 15mm heads. Printed with Sunlu Black PLA on and Ender 3 S-1. 4 wall lines and 40% Infill worked for me but can be changed to taste.
This model is compatible with the lego system.
2x120mm 15mm fans; 2x120mm 25mm fans
Nema 17 mount, Z-axis, 4080U, for Generic linear actuators made by QWORK, Twotrees, Befenybay and others sold on Amazon . This mount allows you to use a Nema 17 stepper motor on a linear actuator that is designed for a Nema 23 stepper…
Solidworks 2017 Part Category: Replacement Parts
Simple bracket for aliexpress-special simracing shifter. Screw holes are 8mm in diameter, shifter screw holes are 110mm
The stock FormD T1 v2 GPU IO cover blocks part of the rear exhaust opening on the Nvidia RTX 4080 / 4090 cards. I designed this shorter cover to fill that gap and not impede the exhaust airflow. This cover is compatible with both 3 and…
Sidemount for SHH Thorn. Uses 6 or 8 m4x8mm screws for shifter side and 2 m8x16mm for rig side.
Gleitmutter für die Monster Tech Alu Profile für M4 Schrauben mit Sechskant Kopf. Ich empfehle der Stabilität halber bei der Struktur die Füllung auf 100% zu stellen.
Only requirement is to print it out of a material that is UV resistant. No supports needed, regular settings for any functional print. It's just very slightly oversized to make it friction-fit with the layer lines but doesnt really matter…
UPDATE 2024-04-03: I added a version for mounting on 4040 or 4080 profiles with M6 or M8 hex screws and T-nuts. For printing the VRS-BOX_4080* files, choose “Split → To objects” in PrusaSlicer. Then arrange the printing orientation…
Eckverbinder für 4080 Aluprofile mit einer Wandstärke von 3mm und 4mm für M8 bis M4 Schrauben. Löcher sind in 8,2mm, 6,2mm, 5,2mm und 4,2mm Durchmesser Cornerbrackets for 4080 Aluminiumextrusions in 3mm and 4 mm thickness for M8 to M4…
Nema 23 mount, Z-axis, 4080U, for Generic linear actuators made by QWORK, Twotrees, Befenybay and others sold on Amazon . This mount allows you to use a Nema 23 stepper motor on a linear actuator from amazon Category: 3D Printing
I needed fan friendly covers for the drives I put in the Inter-Tech 4088 case using this bay adapter . It is made to be a tight fit so you can put it in place without the screws as I did. Set top and bottom solid layers to zero and infill…
Simple foot rest. Printed PLA, 3 shells, 15% grid infill. Organic supports on the large holes. Print support on it's side, pedal flat. M8 screws and T-nuts to mount to extrusion. Two M3x20 screws to attach the pedal. 2026.04.20 Added…
This is a simple mount for the STECS Mini Throttle to attach it to 4080 profiles as used in Simrigs or table mounts. I recommend using the following hardware: 4x M4 threaded inserts 4x M4x10 countersunk head screws 6x M6x12 socket head…
Model siren. Rotatable (Fixed now!). I also made the prototype version. Fixed (non-rotatable) version is still up.
Stephen King's 1408 - 2007 3D printable model. Very easy to print, but it's tall and takes a while.
This is a deshroud bracket designed for the MSI Suprim X RTX 4080 and 4090, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
loose ground coffee cover for philips coffee machines For models 1200/2200/3200 For me only like a case. I don't use the hatch opening printed on creality ender 3 v2 neo printer material petg filling 20%
A friend of mine has decided to upgrade his printer with linear bearings for his hotbed. For the Y-axis it is used a 4080 C-beam. He asked me to design and print the plastic parts. Components available Version 1.0 increase the size of the…
i suggest to refer to the original page of the project to get more info but i will update the description in the future to add more info about it. Update April 27: added universal mount and added space at the top to fit m5 nut. Update May…
Unfortunately, my Inter-Tech 4U-4408 server case does not have a 5.25 bay. So i made this mount to insert a 2x5,25" Icy Dock ToughArmor MB508SP-B. It fits into 2x 5.25” drive bays and you have to cut a hole into the frontplate of your…
This model is compatible with the lego system.
This model was designed to help increase the reach of the GPU support provided bu ASUS for their TUF RTX4080 graphics card. In a full tower E-ATX case, one may find that the GPU sits high enough off the bottom plate that the stock support…
ITEM light 4080 3-way connector left side This 3-way connector for 4040 / 4080 profiles was designed for a DIY laser cutter project. It easily connects three ITEM profiles to each other, which can be attached with four M8 x 20mm inner…
MKS original screws needs to be replaced for longer m3x16. Board is secured to the mount with 4 screws.
Wanted the suprim logo on my radiator tube comb so I embossed it in after sketching. May make a MMU compatible version once i get my other printer fixed, to allow the logo to be printing in a different colour instead of embossed.
This is a disk fanshroud that can be installed behind the harddisks in the Inter-Tech 4U-4408 case. Since the case is pretty compact I had to make some compromises. Also, It is possible it will not fit for you if you have, for example, a…
ITEM 4080 3-way connector right side This 3-way connector for 4040 / 4080 profiles was designed for a DIY laser cutter project. It easily connects three ITEM profiles to each other, which can be attached with four M8 x 20mm inner square…
Suits the china USB handbrake and mounts on the side of an aluminium profile of 4080. Perfect for your sim rig. Just print in PLA with 25% infill laying on the side for best strength for those moments when ju have to save that drift. Have…
This is a model I made for a friend, of the little glide piece for the curtains of the VolkswagenTransporter T4. Best to be printed without brim, and with very delicate tree supports. Use a 0,10mm height for the layers.
Rear Door Handle Fiat Scudo / Citroen Jumpy / Peugeot Expert OEM 9408720738 - Maniglia Interna portellone posteriore Two Versions: Standard / Lite MANIGLIA INTERNA SERRATURA PORTA PORTIERA DESTRA PARETE POSTERIORE FIAT SCUDO FIAT…
I created this armrest replacement after my Monstertech HOTAS chair mount interfered with my chair's existing armrests. I ordered extra 4080 extrusions and made my own adjustable armrests to replace the stock arms that came with the…
Držák na stůl pro multimetry Voltcraft LCR4080, VC830 a podobné
A simple mount to fix the power supply of a LG 34GN850 to your simrig or any 4080 aluminium profile. Print with Pla and use supports under the corners. Use DIN 912 M6x16 to mount to you rig.
I just rescaled it for a friend. Not printed it myself. https://www.thingiverse.com/thing:3154080
I needed a way to easily remove and replace my paints for storage. This fits the ArtBin Sidekick 8408AB craft box and the SCAD file can be easily tweaked to create any sized rack. The rack prints in two pieces with divots where the posts…
DC/DC Buck converter, voltage step down enclosure (case) suitable for CR-D4080P
Hi, This is a Deshroud mod for my Gigabyte RTX 4080 OC . It makes the GPU 4 PCIe slots tall, but it’s now quieter than the coil whine of my CPU. The mod reuses all the original shroud screws except one. For that one, you can either skip…
// DREMEL 408-432 TPU // 2g - 0.81m, no support, TPU Dimensions : 13 x 13 x 13 mm For replacement of Dremel 408 and 432 center. (grinding belt category) TPU work well because the part must be flexible. Design plan on demand.
I needed a small and sturdy L-bracket as a rest for a large wooden board inside a frame made from 4080 aluminum profile. It prints fast and easy without any supports (if you orient it correctly) and uses a short M6 screw and a t-nut to…
Hey, I designed this connector to join a 2040 extrusion profile with a 4080 extrusion profile. The reason was that I wanted a different base for the ‘Jo Presser – Threaded Insert Heat Press.’ The screws i used for the connection to the…
HW-408 Amplifier ventilation case with exposed outputs and potenciometers Shortly the case for a HW408 class-D amplifier
I put a MSI Geforce 4080 Super Ventus 3x in a Cooler Master NR200. Tight fit! In this case the GPU sits horizontally and the card is very long and unsupported at the front. Because I will need to move this PC occasionally I made this…
Protection layer designed to slot-in to 4080 profile that is classified as "lightweight" (thinner structure). I originally designed this to slot-in to 4080 profile to act as a shelf for a computer attached to a monitor stand. I covered…
Ich benutze ihn für TX Plus 25, 20, 15, 10, 9, 8 Schlüssel
Printed on a BambuLab P1S with PLA with 0.2 layer height
The CXA 302 is a heavy-duty boring bar holder designed for use with CXA quick-change tool posts, typically found on larger lathes (13"–18" swing). It securely holds round shank tools such as boring bars and is built for rigidity and…
I made an insert for a .408 Chey Tac. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate if someone would be able to verify a good fitting.
I'm modeling them for friend with Yucatan. He didn't broke them yet unlike the original ones, so here is my files :) Just 1:1 replace part for these fragile rocksliders Printed with PETG 50% infill 2 perimeters (flexible)
Made this to properly space and support a nema 23 stepper on top of a 4080U linear motion unit from Amazon. https://a.co/d/iyIKNiq Coupler used was this anti-backlash “lovejoy” style connector. https://a.co/d/0nqUxjk Printed from Rakine…
I ended up recreating the models from scratch. I fixed the scaling issues and updated the distance between the holes to 65 mm (Mounting points for BUTTKICKER 4080 universal mount post). I also reduced the length of the insert by 1 mm to…
non working real working one will be out soon print if you want for fun
Crumbling Cursor Causing Concern? Correct it Conclusively with this Clever Creation! Replace your crumbling K&E slide rule cursor bars with this! Quick print with integrated spring. This will also fit N4080-3 rules and probably others as…
ORGANIZZATORE GT408 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This is a modification to attach the panel to the side of the Tevo Little Monster. Print Settings Printer Brand: TEVO Printer: Delta (Little Monster) Rafts: No Supports: No Resolution: 0.3236 Infill: 50 Category: 3D Printer Accessories
Tirador (2 tipos)para ventana de aluminio, asi podras hacer mas fuerza, modelo de 150 mm entre agujeros . Topes ( 2 medidas) para poner detras en la guia para evitar que se abra demasiado y te coja los dedos, es elastico para que no de…
Aluminium Profil (4080/40120/40160) Bohrlehre für eine zentrale 12mm Bohrung
Designed after the original part, but simplified push buttons a bit. I've split model into three parts for better printing. Just connect them as on the picture, you may need to apply some force. In the attached .zip you can find FreeCAD…
Just though I'd re-produce this corner connecting bracket for 4080/8040 extrusion. I use a lot of them for my sim racing rig and these are great when you only need to hold corner pieces together, but would rather not use your metal ones.…
I removed all drive bays in order to make more room and fit a 4090 GPU. While doing this I thought it would be great with a new front for better air-flow. This chassi front is made to print three time to make up for the whole front. Each…
Perfil para tapar la madera y cojer el embellecedor de debajo de los fregaderos, para madera de 16 mm , normalmente son de esa medida. 2piezas para ancho de 560mm
varios soportes para cajones cocina con riel , valido para papel aluminio o papel film valido para el rollo redondo, o modelo para caja de 45 mm tipico de caja de carton . Soluciones para cocinas
Ich nutze die Modelle als Halterung für den Stecker „ Kalitec KALI-2408 ”, um das Netzteil meines „Prusa MK3.5” außerhalb des Druckergehäuses ( PrintClosure-Projekt ) zu montieren, sowie für den Stecker „ Kalitec KALI-2406 ”, um…
Mount for this Cases https://www.thingiverse.com/thing:2981147 PanelDue 7i & 5i Cases with flexible mounts
