46 models
CVLIFE 3-9x40AO Throw Lever “Scope throw levers are an important component for shooters who need to quickly adjust the magnification of their optic.” - TRACT Optics This model is a throw lever I designed for the CVLIFE 3-9x40AO rifle…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Timberjack 240A - 1:16th Scale Holes will need to be drilled out for screws. These holes are marked with indents. Uses M4 and M2 screws. Uses M2 x 200mm Rods
This is a C-LIN SSR 40A480VAC Mount for my DIN Rail Bracket. You can find the bracket here ! For the SSR you need M4 screws and M4 Nuts. For the DIN Rail Bracket Mount you need M3 countersunk screws. Due to the heavy load on the SSR and…
This model is compatible with the lego system.
Laptop Stand for the Lenovo ThinkPad USB-C Dock Gen 1 and Gen 2 (40AS) with sizes of 17.1 x 8.0 x 3.08 cm and the front connectors on the left side. Prints in 3 pieces (on Prusa Mini and above, rotate the long connector by 45 degrees)…
PLA plastic holder for a 3S 40A BMS board and three 18650 batteries. The design provides secure fixation of all components, easy access to terminals, and tool-free assembly. Ideal for DIY projects such as portable power banks, e-bikes,…
This is a Timberjack 240A cable skidder resized so that you can haul logs to the landing on your Ho scale (1:87) model railroad or diorama ready for your logging trucks or pulpwood cars. Recommend 0.2 nozzle if FDM printing, as Starstreak…
This adaptor allow you to attach the camera to a wall / cealing or even to a regular electrical box if needed. I didn't think I would need this until I received the camera and realized how weird the casing was made. Hope it help others :)…
Adapter to convert the Skil 1340AA Table Saw dust extraction port to camlock. I think 1340AA is the European version of the Skil 15 amp 10 inch saw (TS6307), no idea if it will fit but they look the same. For use with Peter H's Camlock…
Plastic holder for BMS 4S 40A board and four 18650 batteries
A blank for design fitting.
You can print this shell for the shell ejecting M40A6 Dart Sniper Rifle. My version of the shell is a little bit slimmer than the original one. Using the original meassurements always lead to the shell getting stuck when pulling back the…
Panel for the spot welding machine for cells. NY-D04 40A/100A. from Ali. Only the selected (yelow Line) element and base for the electronic board. Print instructions Unassociated tags: NY-D04 40A/100A Category: 3D Printing Print Settings…
HAKRC F722 40A AIO Flight Controller
Lochdurchmesser: 4,5 mm (für Montage)
Replacement rear panel/bracket for Fluke 8840a bench multi-meter. design has integrated feet on one side and can additional feet attached to the 2.5mm holes on the outer side of the part. Print instructions Printed on MK2.5s using Sunlu…
Theres two options for the magazine and the bottom. One being a normal/blank one so you could modify it to your liking as well. Assembly is pretty easy. Insert the Follower into the Mag from the bottom. Push the spring in and then close…
Vewlix Ashtray Stopper. Taito part number F9008240A Printed with 2.8mm holes which will work with either the original 3mm self tapping screws or any M3 machine screw with a thread length between 4-8mm. I printed the part with the top face…
With those clamps you can place your entire build plate into the ultrasonic cleaner. At optimal fill height, there is about 2cm left on top, so no spilling should occur. Max height of models on the build plate should be around 11.5cm.…
print two of each. Includes recess for the power cord.
Note: Depending on your printer you might need to slightly scale up or down the model to ensure a snug fit onto the barrel. The silencer is very plain because im using a cover for it anyway. Feel free to add more details and adjust it for…
Lenovo ThinkPad USB-C Gen 2 (40AS) dock to 36mm monitor pole mount
I realized that my older model was missing the components on the bottom of the board.
End-mill, collet and wrench holder for the Roland MDX-40A benchtop milling machine, or just about any small milling machine. It has holes for end-mills with 1/4" and 1/8" shank diameter and holds both wrenches used to remove the tools.…
Abdeckkappen-Unterholmverbreiterung OEM 321 853 140A Passat 32b GT "Schwellerverbreiterung"
Designed this to get the hub off the top of my desk but allow it to be easily accessible. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 20% Filament:…
Build for https://s.click.aliexpress.com/e/_DmeGUsv and used: https://s.click.aliexpress.com/e/_DdgJN9J to be used in https://www.printables.com/de/model/49417 cable pipe https://s.click.aliexpress.com/e/_DeQnV8x
PWM DC 9-55V 2000W , 0-40A Motor Speed Regulator High Power Linear Speed Control 9V 12V 24V 36V 48V KSD 9700 250V Termostat Ventilator 32, 40, 50
The original coffee container was so big for my use so I designed a new one to only put a few grams of beans.
Uses M6 screws and nuts to attach the pieces to each other and M3x60mm Screws and nuts to attach the flat panel to the mount. The M3 screws are screws through the motor base and the 3d printed base to the other side. V2: Increased the…
Peut être modifié et personnalisé. Emplacement dessiné pour le collage des attaches du pied.
I followed the dimensions in the picture, but they are a little off. just use M4 or M3 screws. M5's for the 2020 part
Had to mount the PSU for my LEDs up on the ceiling and didn't want the cable contacts uncovered. Also as I was on the job I added a socket for a power cable, a switch and some barrel conectors so I don't have to take of the cover every…
If you have the old ASG VFC colab M40A3 you may have come across the issue like me that there are few good solutions for keeping spare mags to hand. I made the Molle adaptor a separate part for both ease of printing and so other types of…
This is a replica of the classic figure A from the Heritage Miniatures Dungeon Dwellers blister pack number 1240, "Goblins". (see…
Apple Macintosh 840AV - Reset/Programmer's Switch
This is a replacement for the plastic button for the front/rear switch on a Hewlett Packard 3440A Multimeter. Printed with PETG so there would be some flex when attaching to the switch.
20x20mm mounting pattern AIO
[Eng] [Note] The model number I provided was incorrect; the correct model is the 40AS. I apologize for the error. According to reports from who have printed the mount, the 40AY is also compatible in terms of size. (though the front port…
Alientek DM40A Holder, A hole will need to drilled for the power button, And glue the partes together.
An adapter for cordless delta sanders, for connecting to a vacuum hose. Made specifically for P.I.T. PSP20H-140A, but may fit other ones. Pictures and dimensions are provided if you want to check whether it fits your machine. Wall…
Docking Station for ThinkPad Hybrid 40AF, used together with a ThinkPad T14 Gen1. Made of two parts that press together supports needed.
Timberjack 240A - 1:16th Scale Holes will need to be drilled out for screws. These holes are marked with indents. Uses M4 and M2 screws. Uses M2 x 200mm Rods
This is a Timberjack 240A cable skidder resized so that you can haul logs to the landing on your Ho scale (1:87) model railroad or diorama ready for your logging trucks or pulpwood cars. Recommend 0.2 nozzle if FDM printing, as Starstreak…
Zero Clearance Insert – Skil 1340AA Precision. Stability. Cleaner cuts – instantly. Upgrade your Skil 1340AA with a purpose-built zero clearance insert designed to deliver cleaner cuts, improved control, and a more professional result in…
