110 models
*I thought the MK3/4 were 250mm in height similar to most other printers in that size category, I will be working to add a version that fits the 210mm height build volume of those printers Scaled down to fit the bed of a standard 250mm…
This is the goldilocks ornament, not too big, not too small, but just right. It is 9-sided or Nonagonal, so looks really nice. It is 110 mm from the very top of to the bottom, and about 47mm at the widest point. I found many ornaments to…
A remix of "Galaxy Watch 5 Active Charging Stand" to fit the 47mm model of the Galaxy Watch 6 Classic. I printed it with 100% infill to give it some proper weight :)
I was struggling charging my watches and still be able to see / operate them. So I made this stand wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on…
Scope cover that fits a 47mm scope ocular housing / objective bell. (Fits great on the old Bushnell scopes.)
A 9-ball billiards rack for 47mm balls. There are two versions, one that prints as a single piece and one that is sliced into multiple pieces for smaller print beds. For the multipiece version, supports are needed. Support My Work Should…
It's for any 47mm height cooler with a 92mm fan, I use it specifically for the Fractal Ridge. It uses the existing fan clips, a little more force is needed to put it back in because of the 1mm extra height. Dimensions: 92x25x92mm I use it…
In addition to the screen protector on the display, I wanted to protect the watch all around while wearing it. It’s not a full-fledged protection, but it does prevent the most significant scratches. The case absorbs light impacts;…
The model was designed to be printed at 75% scale for a 47mm (1.8in) diameter Kong tennis ball. At 75% scale, the two parts are connected together using: Square Head Screw; ¼"-20 Thread, 1-½" Long (McMaster-Carr Part Number: 91465A107)…
A Charger Housing for the Galaxy Watch 4 classic 47mm. Simply clip the supplied charger into the housing and you're done
Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood, modeled after the nice but expensive Hope Pro Sander. This version fits the more “standard” 608 bearings. You can see the two versions in the third…
Držák na mince v kapsli průměr 47mm - Coin holder in capsule diameter 47mm
A simple stencil to draw lines on a blank page.
Gerader Waschbecken Adapter für Camping Waschbecken mit 47mm Anschluss auf 25mm Schlauch. ----------------------------------------------------------------------------------------------------------- Straight sink adapter for camping sinks…
45 Grad Abflussadapter Camping Waschbecken mit 47mm Gewindeanschluss auf 25mm Abwasserschlauch
A 10-ball billiards rack for 47mm balls. There are two versions, one that prints as a single piece and one that is sliced into multiple pieces for smaller print beds. For the multipiece version, supports are needed. Support My Work Should…
simple Vacuum Cleaner Adaptor for Circular Saw Makita SP 6000 with a diametre of 47mm it fits on the rubber adaptor which is incuded at the Makita Vac
Accommodates standard 1.25" telescope eyepieces up to 1.84" dia (46.8 mm) and 3 to 4.5" length (75-115mm). WIDER than the original model to fit eyepieces with wider bodies. TALLER (30mm additional usable) and MORE THREAD ENGAGEMENT than…
⚓ Fuel/Water/Waste Deck Filler Cap – 47 mm Thread This is a 3D-printable deck filler cap designed for fuel , water , or waste tanks on boats. Originally modeled for a Catalina 30 , it fits a deck fill fitting with an outer thread diameter…
I printed the parts out of PC-ABS to make them as heat resistant as possible. There are two parts to make it easier to print. It should be a nice thight fit. If you need to change something about the dimensions, there sourcefile from…
Vacuum hoses 47mm connector / spojka vysavačových hadice 47mm Printed from TPU
A simple and easy to assemble Galaxy Watch 5 Pro (45 mm) | Galaxy Watch 6 (47 mm) charging stand. Do you like my models? Consider buying me a coffee ;) Print orientation You should print the models like below: Assembly Insert your Samsung…
The boxes were printed in PLA with normal settings (.4 nozzle, .2 mm layer). The plain box was printed in transparent PLA with Gyroid infill. The pillars box may need some support or not, depending on your printer. Decide at own risk ;)…
Simple protection, that protects your watch from damage to the bezel. 0,2 nozzle is a must. This is ASA profile, but you can try PLA or PETG maybe the scale needs to be adjusted. Build plate is smooth for the cleanest look. It is…
A 7-ball billiards rack for 47mm balls. Support My Work Should you want to, you can support me on Patreon . If you are unable to become a patron, remember that likes are free and make designers happy! :-) On Patreon, it is also possible…
This is a take on a Goose Hydra - it was a fun to blend together from multiple models. I split out each head, foots and body then merged them together. At some point I might like to make a kit of a body and heads that can be attached /…
A 3-ball billiards rack for 47mm balls. Support My Work Should you want to, you can support me on Patreon . If you are unable to become a patron, remember that likes are free and make designers happy! :-) On Patreon, it is also possible…
I created this little enclosure for some projects i have. You can print the seal out of TPU which seems to work well. You need to add in m3 nut inserts as per second picture. You can break off the centre part if you do not want the…
Garmin Fenix 8 bike mount adaptor (remixed). I have adapted this model to fit the Garmin Fenix 8. I filleted all corners to remove potential stress points. I also made a slim (aero) version that reduces the height of the adapter to the…
porte savon en 2 parties a coller . facile a imprimer coller les 2 pièces a la super glue pour savon de 80x47mm trous d'évacuation de l'eau et surélevé Category: Bathroom
For ball diameter of 47mm. Category: Sculptures
Ich brauchte eine Ablage für meinen Saugschlauch nahe der Werkbank, damit er beim kurz weglegen nicht auf den Boden rutscht. max. Schlauchdurchmesser 47mm ------------------------------------------ I needed a place to put my suction hose…
Shorter version, 43mm to fix collision issues. No z-resize, it was cut and 4mm were removed. K1 max has 45mm distance between the nozzle tip and lower rod (see slicer config for your printer). The original model is 47mm. This means when…
These are scope caps for a 50mm objective and 47mm eye piece. Printer: MK3s, Filament: PETG Prusament Black and Orange. Slicer: Default settings.
PRINTABILITY - PLEASE READ These are resin miniatures at 32 mm. On FDM with a 0.4 mm nozzle the finest details on this model measure 0.55 mm — below what the nozzle can physically lay down, so they print thinned or missing entirely. For…
This simple disk allows a Wellbrook loop antenna mast to be supported inside a standard UK sized scaffold pole with an ID of 47mm. Print 2 and place onto the Wellbrook mast section then slide inside the mounting pole and drill a 4mm hole…
PVC Pipe Tapered Coupler (42mm to 47mm) This is a simple tapered cone–style coupler designed to join two PVC pipes with different outer diameters. One end has a 42 mm opening and the other a 47 mm opening, allowing a smooth transition…
Magnetic heart 47mm. Can be used as a fridge magnet or to create a heart from two parts. While printing, you must pause printing and insert the neodyme magnet (Ø14.95x1.95mm), then continue printing.
Tophat and Skirt parts required to make the v.pc case 47mm longer to fit a 460x380mm tinted glass panel from off the shelf pc cases. I printed mine out of ABS+ on my creality k1 and I added a pause to switch filament for the multicolor…
This is a lens cap i made for my Minolta Rokkor-X 45mm 1:2 lens but it fits most lenses with a 47mm filter ring. The part labeled "TPU" should be printed with TPU and then glued to the other part. The fit should be snug.
Hydro-Topf Höhe 100mm, Duchchmesser 57/47mm PETG 0,2mm ohne Stützen
To lift a fairly large and heavy roller shade, I bought a Zigbee-connected Zemismart 47 mm roller shade motor (ZM35R1). Unfortunately, the included adapters did not fit my curtain rod due to additional internal insets. I designed and…
Print was made with PLA and 15% gyroid infill. That is not strong enough to press the form in 4 times 1 mm aluminium, EN-AW1050 soft tempered, strips. I press between two 10 mm thick steel splints. Initial pressing is done with glue…
Wall plate adapter for 30A 6600W Smart Switch for Boiler, Water Heater, Window Air Conditioner etc. Fits an EU/UK 47mm back box for the specific smart switch linked below. A version with a small divot is included to allow for wires to…
Labelled loading block with both Solid and Vase Mode versions. Category: Tool Holders & Boxes
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
To lift a fairly large and heavy roller shade, I bought a Zigbee-connected Zemismart 47 mm roller shade motor (ZM35R1). Unfortunately, the included adapters did not fit my curtain rod due to additional internal insets. I designed and…
Garmin Fenix 8 bike mount adaptor (remixed). I have adapted this model to fit the Garmin Fenix 8. I filleted all corners to remove potential stress points. I also made a slim (aero) version that reduces the height of the adapter to the…
Shroud for 47mm Scope, with the ability to add an ARD (Anti Reflection Device). Easy to print, Please leave a like, and a picture if you found this useful!
Vac hose connector for cyclone separator: https://www.printables.com/model/74660 Printed with TPU
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. This version has these improved features:…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. This version has these improved features:…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. This version has these improved features:…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
