Fuel/Water/Waste Deck Filler Cap 47mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printable 47 mm threaded deck filler cap with O-ring seal, suitable for fuel, water, or waste tanks, featuring a bo
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 68
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
⚓ Fuel/Water/Waste Deck Filler Cap – 47 mm Thread
This is a 3D-printable deck filler cap designed for fuel, water, or waste tanks on boats. Originally modeled for a Catalina 30, it fits a deck fill fitting with an outer thread diameter of 47 mm.
🧰 Includes M3 hole at the bottom to attach a chain (to prevent it from falling overboard)
🧵 Uses a 44×2 mm O-ring for a tight, splash-resistant seal (can also fit 44×1 mm)
💧 Print in PETG or ASA if used for fuel or long-term outdoor applications
⚠ Note:
PLA prints are not fuel-resistant and are best for temporary or prototype use only.
Print Settings (Recommended):
Layer height for threads: 0.08 mm
Infill: 20–30%
Print orientation: vertical (threads facing up)
Perfect for boat owners or DIYers who need a quick, printable solution without a trip to the chandlery.