P
Printableskunaa
M4 hex screw and nut (M4x10, M4x15, M4x20, M4x25, M4x30)
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
- Downloads
- 4,416
- Likes
- 141
- Rating
- 4.67
Search results: 4x2
Counting matching models…
P
PrintablesLWC
PVS 420 thermal vision 50Hz low budget 18650 monocular (256X192, 384X288, 640X512)
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
- Downloads
- 1,833
- Likes
- 1,230
- Rating
- 5
P
PrintablesK2_Kevin
Honeycomb Wall Gridfinity Shelf - 4x2
Gridfinity Shelf for the Honeycomb Storage Wall . I designed this to hold firm on your Honeycomb Storage Wall. Compatible with all your Gridfinity storage containers. Get your Prusameters… Post your Makes! If you like this project, please…
- Downloads
- 1,606
- Likes
- 560
- Rating
- 4.91
P
PrintablesSMACKMAX_
Garbage Bin - 24x24x45(x) cm
Garbage Bin - 24x24x45 cm Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Fully Printed Waste Bin Tub under needs a bit of support 240 x 240 x 450 mm…
- Downloads
- 1,175
- Likes
- 480
- Rating
- 5
P
PrintablesSumo.Hipster
Gridfinity 4x2 Pen tray
Remix of the original pen tray to fit a 4x2 gridfinity.
- Downloads
- 1,023
- Likes
- 112
- Rating
- 5
P
PrintablesJohnMartin
Gridfinity - Harbor Freight Pick Set - 4x2
I re-modeled this with the exact dimensions from charlescho's design, except I reduced the height by 10mm.
- Downloads
- 990
- Likes
- 187
- Rating
- 4.9
P
PrintablesIllia Shekera
Gridfinity Pen/Sharpie Stackable Tray 4x2x4
Features: - suportless magnet holes - easy to get the pen or sharpie from tray - stackable design
- Downloads
- 838
- Likes
- 103
- Rating
- 4.89
P
Printablesshoooo
Gridfinity 4x4 and 4x2 base French cleat mount
Two options for attaching back (cleat) CA glue. Designed with a mating registration surfaces to locate horizontally in the center and to give lots of strength for almost all purposes with just CA glue Hardware, made for ¼ bolts 2 x ¾"…
- Downloads
- 632
- Likes
- 178
- Rating
- 5
P
Printablessmtk
Battletech stackable miniature storage trays 4x2 and 4x1 All Mechs and Aero/Vehicles
Battletech stackable miniature storage tray Small 4x2 and 4x1, Stores 8 and 4 mechs or wider units like Aero/Vehicles Trays stack on each other It's stacking compatible with each other Fits all mechs if you want more storage density…
- Downloads
- 608
- Likes
- 75
- Rating
- 0
P
PrintablesBrasso
Gridfinity (4x2) Sharpie Tray 5 Pens
A shallow tray for Sharpie Pens. Two depths. Deep on better for stacking. The shallow one site nice as a top tray - I needed it to fit an extra layer in the draws I'm using.
- Downloads
- 533
- Likes
- 59
- Rating
- 5
P
PrintablesKimKim
Invisible GPU Cable Comb for braided cable extensions 4X2, 8X2, 12X2 (fits 24pin too)
My design for GPU Cable Comb for braided cable extensions for 3mm OD cable extensions there are 3 files 4X2, 8X2, 12X2 for 8 pin PCIE cable. good for 24 pin too (12X2). ***Designed with a 0.4 nuzzle in mind**** printed in PLA+ with 100%…
- Downloads
- 517
- Likes
- 79
- Rating
- 5
P
PrintablesRagnar
Realy Duplo Compatible 3D-Printing Optimized Brick (4x2)
Hey, this is my first upload on Thingyverse and I'm happy to give something back to the community. This thing has gone throug a lot of testing and is now in a state I feel comfortable publishing it. This is finally a Duplo compatble brick…
- Downloads
- 499
- Likes
- 63
- Rating
- 5
P
PrintablesSkippyMcSlappyPants
Traxxas Rustler 4x2 and 4X4 Paddle Tire and Rim
I just want to say that these really do fling dirt / rocks / gravel behind them in a HUGE arc. These tires are not good if you are around anyone who does not want to get peppered with rocks and dirt. These can easily fling rocks 30 feet…
- Downloads
- 493
- Likes
- 92
- Rating
- 5
P
PrintablesBasementLAB
Strong Angle Bracket 30° - 45°- 90° - M6 - 1/4x20mm Slots
Angle Bracket 30°- 45°- 90° - M6 - 1/4x20mm Slots The Bracket is a rigid angled mounting plate, available in 30°, 45° and 90° configurations. It features slotted faces for adjustable positioning and is compatible with both 1/4-20…
- Downloads
- 394
- Likes
- 56
- Rating
- 5
P
PrintablesThimira
Fan Bracket for LSI 9207-8i with 40x20mm Fan (NF-A4x20)
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
- Downloads
- 378
- Likes
- 36
- Rating
- 5
P
PrintablesGarlicDoggo
HotWheels Stack 4x2 and 4x1 Remix
I liked the original stack model a lot but I realized I can't stack another one on top so I made my own for the bottom to hold an extra 4 vertically. I took the original and remade it from the ground up with as much fidelity as I could…
- Downloads
- 373
- Likes
- 62
- Rating
- 0
P
Printablesiotandserver
Microserver GEN8 Noctua a4x20 Holder CPU active cooling
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
- Downloads
- 359
- Likes
- 23
- Rating
- 4
P
Printablesthe freewheeler
BORA Centipede | Thin Hex Nut (M14x2.0)
This nut matches the spec used on Bora's Centipede expandable workbench system. Standard nuts are too tall and wide to fit with their 'p-top' and riser accessories. It's unfortunate that Bora makes it this difficult to replace a small,…
- Downloads
- 325
- Likes
- 36
- Rating
- 5
P
PrintablesTheo de Carvalho
Gridfinity for two glasses (4x2 base)
Just remixed the model to fit two instead of three glasses
- Downloads
- 319
- Likes
- 40
- Rating
- 0
P
PrintablesMark
Ender 3 V2 Lead Screw Knob T8x4x2 (8mm, 4 start, 2mm pitch)
Ender 3 V2 Lead Screw Knob T8x4x2 (8mm, 4 start, 2mm pitch) Designed in FreeCAD. Ender 3 v2, Prusament PLA, 0.4mm nozzle, 0.2mm Layer height.
- Downloads
- 294
- Likes
- 33
- Rating
- 4.67
P
PrintablesMissMarcie
Pegboard Gridfinity Refined 4x2
What if you could hang Gridfinity bins on a pegboard without the mess of glue, but with the securing magnets? I use Gridfinity Refined for bases and baseplates. 6x2mm magnets are either friction or snap fit. I do use a bit of hot melt…
- Downloads
- 294
- Likes
- 57
- Rating
- 5
P
PrintablesSmirnaff
Mounting kits for mounting Noctua NF-A4x20/A4x10 fans above and below the CPU cooler in Fractal Design Terra case (only for position 1)
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
- Downloads
- 279
- Likes
- 26
- Rating
- 0
P
PrintablesTae
Small Sanding Block M4x25mm
Remix of the original Small Sanding Block that uses M4x20mm screws. This version requires M4x25mm screws so it is a bit higher (duh). Knob and Cap are unchanged in this remix. For detailed description please refer to the original model.…
- Downloads
- 275
- Likes
- 61
- Rating
- 4
P
Printablesmariospinaci
Raspberry Pi 5 case with Noctua NF-A4x20
Case for the raspberry 5 with the Noctua 40x20 5v fan. To assemble this project, the following are required: Raspberry Pi 5 Noctua NF A4x20 5V Fan (can be PWM version) with 4 screws 4 x M3 25mm screws (to join the top and bottom) 2 x M3…
- Downloads
- 263
- Likes
- 54
- Rating
- 5
P
PrintablesAlexandru Hauzman
Box with Drawer_4X2_150x70x75
Organize and store your component. This drawer is made for smaller components, tools,etc, you decide what to put :). There are 2 different drawer available : Drawer 1x1 Drawer 2x1 - with 1 separator You will need to print 8x Drawer 1x1,…
- Downloads
- 262
- Likes
- 57
- Rating
- 5
P
Printabless2sP
Gridfinity | Base: Skelet | 4x2 | select2stertPrint
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
- Downloads
- 260
- Likes
- 13
- Rating
- 5
P
PrintablesFrugal Shave
1" Diameter Knurled Knob for 1/4x20 nuts and bolts
Knurled Knob for 1/4x20 nuts and bolts. I really like the feel and grip of the knurled knob, and it has a smaller footprint than wing knobs. This is perfect for woodworking jigs that use T-track 1" outer diameter, fits the 7/16" head on a…
- Downloads
- 228
- Likes
- 32
- Rating
- 5
P
Printableskarl-herbert
Prusa MK3/S Mini Y-Achse Gehäuse für Sinterbronzelager 8x14x20 - X-Achse Adapter (neu)
Bitte sorfälltig bis zur letzten Zeile durchlesen: Gedruckte Gehäuse für Sinterbronze Gleitlager in Fest- und Loslagerausführung. Der 14mm CAD-Gehäuse-Bohrungsdurchmesser ist auf 14.10mm Spielmaß konstruiert. Beim Festlager sollte das…
- Downloads
- 225
- Likes
- 68
- Rating
- 5
P
PrintablesvagueDirector
20x20mm to 25.4x25.4mm adaptor for whoop flight controller stack mounting
Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to mount a happymodel diamond dvr vtx to a 20x20 mount. Holes should be tight enough for the screws to bite, so nuts…
- Downloads
- 221
- Likes
- 10
- Rating
- 0
P
PrintablesAndreas
Pool Planen Halter Bestway 4x2
Zum schnelleren Abspannen der Poolplane für einen Bestway 4x2m Pool Die bestehenden Files haben entweder alle nicht zu meinem Pool, oder den Spannern gepasst, also in fusion selbst einen entworfen. gedruckt mit prusa mk3s 0,6mm nozzle und…
- Downloads
- 202
- Likes
- 48
- Rating
- 4.67
P
PrintablesOscar Matthews
M4X20 H3 COUNTERSUNK SCREW
Tired of nonthreaded 3d screw models? tired of looking for screws to print only to find no models? Well look no further for my M4*20 H3 COUNTERSUNK SCREW, unlike my other one it is threaded!
- Downloads
- 196
- Likes
- 9
- Rating
- 5
P
PrintablesWilko
Cookie Cutters Mittens (4x2)
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…
- Downloads
- 186
- Likes
- 47
- Rating
- 0
P
PrintablesBloodyPolarBear
Gridfinity 4x2 Ziplock & 2x8 Plastic Wrap w/ blade support
2x4 Box with matching 2x4 lid Scaled the original design by @ Teppetuary 's 2x5 box design to be 2x4 to match my needs. Snack ziplock bags don't fit without a slight angle, but not a problem for this smaller box to save the space and…
- Downloads
- 180
- Likes
- 37
- Rating
- 0
P
PrintablesDeanRass
Gridfinity Battery Holder with empty Space 4x2
I've edited the Battery Box below to be compatible with Gridfinity and also have Space for more Batterys. It can hold: 25x AA Battery 20x AAA Battery 10x CR2025 or CR2032 Battery Small Container for other things (ex. Empty Batterys)
- Downloads
- 173
- Likes
- 25
- Rating
- 5
P
Printablesgltovar
Omnifixo Helping Hands Display and Travel Case. Gridfinity 4x2
If you are unfamiliar with the Omnifixo, it is by far the best “helping hands” system I have used for soldering. https://omnifixo.com I wanted to create an compact footprint Omnifixo case that was also compatible with Gridfinity. The…
- Downloads
- 171
- Likes
- 62
- Rating
- 5
P
Printablesw3rN42
3 segments - divided Gridfinity bin 4x2x11u
Divided the original box into 3 segments to store my baking ingredients. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
- Downloads
- 169
- Likes
- 18
- Rating
- 0
P
Printablessamywamy10
Hex Holder Gridfinity 4x2 (4U tall) - holds long, short and extender bits
This hex bit holder holds: 26x short hex bits 9x long hex bits 2x hex extenders In a Gridfinity bin 4 tall x 2 wide x 4U tall
- Downloads
- 167
- Likes
- 37
- Rating
- 5
P
PrintablesSnakeFist
Flashforge Adventurer 5M (AD5M) LED Bar (4x2 magnets)
Uses up to 12x 4x2 magnets - add as many or little as you like. I had issues with other light bars that eventually fell into the printer, so I made my own model adding more magnets to ensure they stand up to the test of time!
- Downloads
- 165
- Likes
- 24
- Rating
- 0
P
Printableskicou
Ryobi One+ Router base plate - 4x2 groove
While rebuilding the guardrail for my old deck, I needed to cut grooves into 4x2 studs to hold vertical glass panels. It is my first time using a plunge router and I did not trust my ability to cut in a straight line, so I made this plate…
- Downloads
- 161
- Likes
- 61
- Rating
- 0
P
PrintablesThomas Lippert
Gridfinity 4x2 shelve for Honeycomb Storage Wall (HSW) with Multiconnect
Remix of Multiboard gridfinify shelves von David D | Kostenloses STL-Modell herunterladen | Printables.com to use it on honeycomb storage wall system.
- Downloads
- 158
- Likes
- 33
- Rating
- 0
P
PrintablescHaOt166
Fan cover A4x10 / A4x20 (Noctua)
Fan cover A4x10 / A4x20 (Noctua) Cover for A4x10 and A4x20 fans. Just put it over and screw it with the fan. With and without cable routing available. The width has a little bit play, the height is adjusted to my printer, if needed…
- Downloads
- 151
- Likes
- 28
- Rating
- 4.33
P
Printablessmtk
Battletech stackable vehicle (half height) storage tray 5x2 and 4x2
Battletech stackable half height miniature storage tray 5x2 and 4x2, Stores 10 or 8 vehicles. Trays stack on each other (two trays stacked equal the size of one regular tray) It's stacking compatible with the 4x2 and 4x1 full height small…
- Downloads
- 144
- Likes
- 7
- Rating
- 5
P
PrintablesMr. Doggo
Ender 3 V2 Neo 'naked' fan holder (Noctua NF-A4x20)
This mount allows you to mount the thicker Noctua NF-A4x20 fan to your Ender 3 V2 Neo. Should work with any 40x40x20mm fan though. This model is a slight modification of Ihor Pomaranskyy's Noctua design.
- Downloads
- 138
- Likes
- 21
- Rating
- 4.5
P
PrintablesHunex
Gridfinity Pencil Crayon Tray 5x4x2
Remix of @HellfireHD_125784's model. Based off the Gridfinity design by Zach Freedman, this stackable tray was designed to hold 18 8mm x 180mm pencils. Part size: 210x167.5 It uses 6x2mm magnets as per Gridfinity design. I recommend…
- Downloads
- 131
- Likes
- 22
- Rating
- 5
P
PrintablesVaulter98c
Intel CPU Tray (4x2 / 1150 / 1155 / ???)
I needed to ship a handful of Intel CPUs and I didn't have any proper way to mail them. I wasn't a fan of any of the trays I could find on here and they didn't seem to be heavy duty enough to my liking for mailing. This is a bit thicker…
- Downloads
- 130
- Likes
- 7
- Rating
- 5
P
PrintablesDino
Snap-on Towel & Clothes Holder for Bathroom Radiator 24x21mm
Description This model was designed as a simple way to extend the functionality of a bathroom ladder radiator. These radiators often lack convenient places to hang smaller items like towels, shirts, or underwear. This snap-on holder adds…
- Downloads
- 128
- Likes
- 34
- Rating
- 0
P
PrintablesBy_Sere_3D
Paint Holder Amsterdam 24x20ml
This is an organizer of Amsterdam acrylic paints of 20 ml for 24 units.
- Downloads
- 125
- Likes
- 23
- Rating
- 5
P
Printablesw3rN42
6 segments - divided Gridfinity bin 4x2x11u
Divided the original box into 6 segments to store my packs of spices. The dividing walls are 2mm thick. Printed with: Bavaria Filaments PLA Galaxy Silver @195°C on Qidi i-mate S 0.4mm nozzle 0.24mm layer hight 20% infill
- Downloads
- 123
- Likes
- 24
- Rating
- 5
P
Printablesbumyong
Bases for Full Spectrum Dominance with 4x2mm Disc Magnets
I print upside-down so that my PEI plate creates a rough texture on the top. But you can orient either way. Check out my video where I review the game and show how I texture my bases:
- Downloads
- 123
- Likes
- 9
- Rating
- 0
P
Printabless2sP
4x2x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
- Downloads
- 122
- Likes
- 8
- Rating
- 4
P
Printablessamywamy10
Needle File Set Holder Gridfinity 4x2 - Draper 6 Piece Diamond
Holds a Draper 6 Piece Diamond Needle File Set - will likely hold most needle file sets in a 4x2 Gridfinity holder. Measure approx 30mm tall when filled, good for shallow drawers. Replaces a much larger and flimsier tool case.
- Downloads
- 119
- Likes
- 20
- Rating
- 5
P
PrintablesPotatoGambit
Ender 3 Noctua NF-A4x20 FLX stock type hot end
This is a Hot end cover to replace the stock Ender 3 or 3 pro cover. Should fit cr10 etc. It is extended in order to fit a Noctua NF-A4x20 FLX 12v fan. It's dramatically quieter and still has great air flow. Uses all of the stock…
- Downloads
- 117
- Likes
- 16
- Rating
- 0
P
PrintablesJCVB
Gridfinity: Stackable, locking assortment box (4x2)
A 4x2 Gridfinity assortment box. It stacks, it locks and if the locking clips wear out you can simply replace them, instead of having to trash the whole box. Requires 4 M3x12mm screws and 4x M3 nuts per Box/Lid for the clips.
- Downloads
- 117
- Likes
- 46
- Rating
- 0
P
Printablesjeloneal
Fan duct for Noctua NF-A15 and NF-A14x25r on Minisforum BD790i and it's variants in Fractal Ridge case
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
- Downloads
- 115
- Likes
- 11
- Rating
- 0
P
PrintablesGergo Koppany
Gridfinity charger holder (4x2)
Gridfinity charger holder in a 4 by 2 base plate arrangements. You get 4 bigger holes and 2 smaller ones: 4 big ones: 32.4mm x 82mm 2 small ones: 32.4mm x 40.5mm
- Downloads
- 115
- Likes
- 17
- Rating
- 0
P
PrintablesGorilloneChad
Lego Brick 4x2
🧱 Mattoncino LEGO Compatibile 4x2 – File STL Stampabile Questo file STL ti permette di stampare un mattoncino compatibile con il formato LEGO 4x2 , un componente classico e versatile. La sua forma rettangolare, con otto punti di…
- Downloads
- 114
- Likes
- 20
- Rating
- 0
P
PrintablesDerRobba
Lego 4x2
This a Lego-compatible Brick i designed :) I'm just a small creator, so i would REALLY apprechiate a like! Thanks to everyone! Also look at the MakerWorld model : https://makerworld.com/de/models/1365762-brick-2x4-leg0#profileId-1411399
- Downloads
- 112
- Likes
- 21
- Rating
- 5
P
PrintablesJackandtheCandle
Noctua NF-A4x20 Fan Reference Model Optimized
Noctua NF-A4x20 Fan Reference Model Also included is a .skp
- Downloads
- 107
- Likes
- 7
- Rating
- 0
P
Printables3DReady
LEGO 4x2 Fondant Mould/Forma do LEGO 4x2 z Fondantu
Forma służy do uformowania klocka LEGO 4x2 naturalnej wielkości. Dzięki dzielonej formie gotowy klocek można łatwo wyciągnąć. Gotowy klocek możesz pomalować pisakami spożywczymi. Pamiętaj!!! Do wydrukowania formy wykorzystaj materiał…
- Downloads
- 106
- Likes
- 23
- Rating
- 5
P
PrintablesBRiiGGEN
Gridfinity Dual Olfa Knife holder 1x4x2U
A 1X4X2U bin made to hold 2 Olfa Craft Knives with thumb slot for easy removal of the craft knife
- Downloads
- 103
- Likes
- 21
- Rating
- 5
P
Printablesihlamur
Ikea Fantastisk 24x24 Napkin, Tissue, Paper Towel Box
Napkin, paper towel, tissue box for IKEA Fantastisk Print with at least 0.30 dimension: 125 mm x 125 mm x 50 mm
- Downloads
- 100
- Likes
- 7
- Rating
- 0
P
Printablesörkelprint
Raspberry Pi 5 Case with Noctua NF-A4x20 5V Fan
Now compatible with Pi5. Things worthy of note: Pi5 has an integrated Powerbutton. The placement on the PCB is not compatible with the idea of this case. Solutions: Round hole on the side of the case you can reach the button with a small…
- Downloads
- 99
- Likes
- 13
- Rating
- 5
P
Printablesjjvcela
Krabička pro LCD 4x20
Vymodelováno ve FreeCADu. Montáž vyžaduje 4 vruty pr. 2,5 x 20.
- Downloads
- 95
- Likes
- 7
- Rating
- 5
P
PrintablesTomer Blu
HotWheels Stack 4x2 back plate
Added a back plate so cars don't fall out when my kids are playing with the display, I intend to later turn this into a storage solution for hotwheels cars.
- Downloads
- 94
- Likes
- 14
- Rating
- 0
P
PrintablesGeorge Baker
Gridfinity 4x2 Filament Swatches Container with Lid
Gridfinity compatible (4x2) filament swatches container with lid and two storage options: Lid on the bottom to have access to the swatches Lid on the top (either for storage or transportation) and space for 45 swatches. The lid snaps in…
- Downloads
- 92
- Likes
- 34
- Rating
- 5
P
PrintablesRamBros
CF85 Day Cab 4X2 5000mm Flatbed - Dragon Auto
The CF85 Day Cab 4X2 5000mm Flatbed scale model is a highly detailed and accurate replica of the DAF CF75 Flatbed truck This 3D printable model has been designed to be fully assembled, motorized, and functional. This model features many…
- Downloads
- 91
- Likes
- 17
- Rating
- 0
P
Printablesrmccown
Project Case for 4x20 LCD display
A project box with an opening for a 4x20 LCD display, and plenty of room to add items inside. Has a back that snug fits. This was designed for a specific project, so you may have to add or remove parts of the inner rear cover for your…
- Downloads
- 90
- Likes
- 3
- Rating
- 0
P
Printables3D_HRLV001
Bambu Lab X1C MC Fan Noctua 4x20
Model A more accurate fit compared to the original model. X1C - Noctua Fan 40x40x20 35x18 More info on the original page. Fan: NF-A4x20 5V PWM I used the original fan connector Bambu Fan Noctua fan White → Blue Light Grey → Green Black →…
- Downloads
- 90
- Likes
- 24
- Rating
- 0
P
PrintablesIonNight
Noctua NF-A14x25r G2 120 to 140mm mounting holes adapter brackets
When I saw the mounting for this fan I thought someone might wanted it to fit a 140mm bracket. So here they are. Took me about an hour to model (that's included the fan) and since the 1st test worked so good, I'll not be making any other…
- Downloads
- 89
- Likes
- 16
- Rating
- 5
P
PrintablesJohnGol
12 segments - divided Gridfinity Bin 4x2x11u Box for cable ties
Remix model: 6 segments - divided Gridfinity bin 4x2x11u by: w3rN42 My model has 11 segments. The remaining dimensions are the same as in the original. Thank you very much for sharing the model that I could modify. It made my work much…
- Downloads
- 86
- Likes
- 11
- Rating
- 0
P
PrintablesSchwarzwaelder88
Duplo hinge 4x4x2
So far I have only tested this print with PLA on my Creality K1max printer. I have managed to print it without any brims and with no noticable warping using a bed temperature of 60°C. Before that I had tried 50°C and there was a little…
- Downloads
- 80
- Likes
- 17
- Rating
- 0
P
PrintablesSkippyMcSlappyPants
Traxxas Rustler 4x2 and 4X4 Paddle Tire 002
* UPDATE * I have designed the fourth and final iteration of paddle tires for my Traxxas Rustler. * UPDATE * I have designed the third iteration of paddle tires for my Traxxas Rustler. * ORIGINAL * This is a slightly smaller paddle tire I…
- Downloads
- 79
- Likes
- 23
- Rating
- 0
P
PrintablesDudeShift
Itty Bitty Fidget 4x2mm Magnets
Remixed of the original for 4x2mm magnets that I had. Followed the same sizing as the original (SIZE+0.1mm diameter of hole, SIZE+0.5mm to depth of hole). The top part is the same un-edited from the original. Would recommend using a alley…
- Downloads
- 78
- Likes
- 9
- Rating
- 5
P
PrintablesWiktor
Arduino LCD 4x20 cover
Cover for Arduino LCD 4x20. Thanks to it, you will not see the black display frame. Dimensions: 115x65x2 mm
- Downloads
- 77
- Likes
- 8
- Rating
- 0
P
PrintablesStringGoddess
Pill Box 24x24
Lid fits securely but is easy to slide off. Printed in white PLA for food safety. Customized version of http://www.thingiverse.com/thing:201304 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=201304 Print…
- Downloads
- 77
- Likes
- 17
- Rating
- 5
P
PrintablesGustaisa18
256x192, 384x288 or 640x512 Thermal monocular (accepts pvs-14 eyepiece)
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
- Downloads
- 76
- Likes
- 12
- Rating
- 0
P
PrintablesnoEntry
Magnetic Cable Holder (for 4x2mm magnets)
This is a cable holder that utilizes 4mm x 2mm magnets attached to the cable and the mounting rail, to allow for easy mount and release of cables. You need to choose the cable clips (the thingies attached to the cable) according to the…
- Downloads
- 73
- Likes
- 29
- Rating
- 5
P
Printablesclever
Supermicro SYS-E300-A9 Noctua NF-A4x20 Adapter
I wanted to replace the already pretty quiet but still server fans of my Supermicro SYS-E300-9A with some more quieter Noctua NF-A4x20 PWM fans. Unfortunately, the original screws and the screws that come with the fans both don't fit to…
- Downloads
- 70
- Likes
- 5
- Rating
- 0
P
PrintablesMichael Murata
WolfBox MF60/MF70 Air Duster Gridfinity (4x2)
A minimal footprint gridfinity bin (4x2) that can hold the MF60 or MF70 WolfBox Air Duster. I wanted a model where the duster could hold any attachment, and all attachments are accessible. Not recommended for a shallow drawer. The modal…
- Downloads
- 66
- Likes
- 12
- Rating
- 5
P
Printablesmedyk3D
BOSCH KIV 34X20 hinge sleeve
My Bosch fridge model KIV 34X20 started to have problems with not closing the doors fully. It appeared that the bottoms hinge sleeve was worn out it disintegrated. Even the doors frame was demaged. So I quickly designed a replacement…
- Downloads
- 66
- Likes
- 4
- Rating
- 0
P
Printabless2sP
4x2x2,5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
- Downloads
- 66
- Likes
- 8
- Rating
- 0
P
PrintablesSirSlaughter
4X2 Multigrid Multiboard Nintendo Switch Dock Holder
MULTIGRID NINTENDO SWITCH CONSOLE DOCK MOUNT! My first upload! yay! I made this because I could not find any Switch console wall mount system that used any modular system such as multiboard, Honeycomb or Gridfinity. It's simple and it…
- Downloads
- 66
- Likes
- 8
- Rating
- 0
P
PrintablesComski
DN25 Fire Hose Cabinet (M24x2) to 3/4 BSP (20x27) adapter
Simply an adaptor from DN25 Fire hose cabinets to ¾ plumbing thread. Working on a version for DN33. Let me know if needed for DN19 or others Print with 100% infill. Not sure about using PLA on this one.
- Downloads
- 65
- Likes
- 4
- Rating
- 0
P
Printablessortwall
Gridfinity 4x2 French Cleat sortwall Grid
French Cleat trifft auf Gridfinity. Hier gibt es das Mesh für den Gridfinity 4x2 Halter von www.sortwall.de zum Download.
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
Printablestaxilian
4x2 Anderson Powerpole panel mount
Customized version of http://www.thingiverse.com/thing:1424702 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1424702 Instructions Using the following options: plate_thickness = 2 pp_margin = 0.75…
- Downloads
- 61
- Likes
- 11
- Rating
- 0
P
PrintablesScootyBooty
Ender 3 Part Cooling Fan Mount Noctua A4x20
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
- Downloads
- 60
- Likes
- 10
- Rating
- 0
P
PrintablesSHR3D.eu
Cable label (4x23mm) plate
Plate of 4x23mm cable labels suitable for Murrplastik 86321020, or label holders supplied with Pepper&Fuchs sensor cables and sensors. The labels are printed with the label side towards the backing, so when using a smooth print pad it is…
- Downloads
- 57
- Likes
- 17
- Rating
- 0
P
Printabless2sP
1x4x2,5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
- Downloads
- 57
- Likes
- 6
- Rating
- 0
P
Printabless2sP
2x4x2,5 Bin | Lable < Gridfinity | Deskorganizer | Tool | select2stertPrint
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
- Downloads
- 54
- Likes
- 6
- Rating
- 0
P
Printabless2sP
4x2x10 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
- Downloads
- 53
- Likes
- 8
- Rating
- 0
P
PrintablesJanKruger
Ubiquiti Unifi UAP AC 4x2 Electical Box Mounting Plate
ATTENTION: Needs to be flipped base plate down for printing. Mounting Plate to secure Unifi AP directrly to 4x2 Electrical Boxes for Ubiquiti Unifi UAP-AC-LR UAP-AC-LITE UAP-nanoHD Should be compatible with common US and Brazilian 4x2…
- Downloads
- 50
- Likes
- 2
- Rating
- 0
P
Printablesaznchris
Mouse Holder (4x2mm Magnets)
- Shaved the bottom by 0.25mm to make a flatter surface - Retained original holes, but added 4x2mm magnet holes on both This design lets you 3M double sided tape mount the top piece to the underside of a table and then stack them under…
- Downloads
- 49
- Likes
- 10
- Rating
- 5