Counting matching models…
Spoiler: I have not created 507 models; the name refers to the book “507 Mechanical Movements” by Henry T. Brown from 1868. The book is also available as an online version with animations. You should definitely take a look at it. Such…
Cover for your Holosun 407C-X2 or 507C-X2 with side mounted battery tray. Print in supplied orientation. Designed to be printed with NO support and minimal bridging.
This model was based on this work. but it has been redesigned to specifically fit the Dell Wyse 5070. I modeled this with a 0.5 mm tolerance. Print Settings that I use: Infill: 13% Layer Height: 0.2 mm Material: PLA (I know it's not…
This model is compatible with the lego system.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Maintain a unique style of Stealthburner. No screws reguired.
Keep your red dot free of dust when not in a case. This model precisely fits a Holosun 507 Comp red dot sight. It has a snap-fit design that will securely hold it in place. Printing: Material: TPU Layer Height: .2mm Nozzle .4-.6 infill: 15%
This is a cover for the holosun red dot. There are 2 versions, one for rail mounted and one for slide mounted dots. Print with extra perimeters so the model is solid. No infill needed. NO supports needed, if your printer copes with…
10" Rack tray to hold a Dell Optiplex 5070 (although other Optiplex models should fit) but also with an option to add a keystone jack (see my other models if you want to test print the same port to test). ** NOTE: These Rack components…
I recommend printing it with PETG or ABS, as regular PLA will permanently deform under sustained pressure. To assemble it, you will need a 6-32 screw with at least 8mm in length.
Hi since i got an 10inch rack i wanted to rackmonut my mini Server in it. Unfortunatly there are only 19inch Rack mounts avalibile online i created my own for my Wyseclient 5070. Printed in ASA on my P1S i recommend ASA it could get hot…
Used to mount HDD's in various HP Machines. This replaces 'blue' HP Screws. Requires 8MM M3 screw to be put through the middle. Print instructions Unassociated tags: 6005 Pro, DC7800 790, HDD Screw, hp blue, hp screw Category: Computer
The Dell Wyse 5070 is a thin client with two DDR4 SODIMM slots one M.2 PCIe slot, and one M.2 SATA slot. Typically the PCIe M.2 slot has a wireless card installed, but I wanted a second Ethernet port so I could run opnSense on the machine…
A 2 part modular rack mount for the Dell Wyse 5070 mini PC. This mount is intended to be compatible with the 19-inch modular rack mount system Mauker designed. You can check out their collection to find other 19-inch mount modules. I…
This is a flatter version of the Dell Wyse 5070 Stand for faster printing and less material usage :) Must be printed with support for the posts. Update 02.02.2026: fixed the gap on the posts reduced the size of the base to match the Wyse…
This model is compatible with the lego system.
Trijicon RMR to Holosun 407k / 507k adapter plate for Brownells Glock 17/19 RMR cut slide or MOS Version 2 Will require the slide posts to be shaved down about 1.5mm or so, you will also need to grind away some material from the 3mm nut…
This model is compatible with the lego system.
This is a remix of uktricky’s Dell Optiplex 5070 with Keystone Port, redesigned for use with 12U server racks . It’s optimized to print on small 3D printers by breaking the model into more manageable sections. Assembly requires 8× M6…
Ever thought about mounting a Small Form Factor Dell Optiplex 5070 motherboard in a full-sized tower? Do you dream of PCI slots not aligning correctly and needing custom adapters to make them fit? Are you an electronics hoarder itching to…
This is a deshroud bracket designed for the ASUS PRIME 5070 Ti/5080 series, featuring dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
🧾 Bill of Materials : MAIN PARTS Front panel (1x) Hex panel (2x) Column Support Middle (2x) Column Support End (2x) OPTIONAL PARTS additional Extra Column Supports Long Dowel Short Dowel 🖨 Printing Tips and Recommendations : Material:…
Mounts to the wall using 4 "Poster Strip" sized command strips on each bracket and an optional nail through each mount. To mount you will need 2 Printed Mounts 8 "Poster Strip" Command Strips 1 M3 screw of at least 16mm 2 M3 Nuts 1 M3…
Cover for Holosun 507Comp-X2 - protect your red-dot! The cover snaps in place using the protrudings that fit indentations on red-dots frame.
As seen on YouTube . Features Tool-less installation Zero-gap. Maximum static pressure 2 slot GPU height No supports needed Installation Guide For a complete step by step guide, visit EIGA/WORKS . Compatible Fans The custom shroud is…
This is a deshroud bracket for the MSI 5070 Ti Ventus / Shadow / 5080 that utilizes dual 120mm fans. It uses the original screws for mounting and requires only additional fan screws. For best results, use at least PETG or another…
Dell Wyse 5070 in Extended (fat) version have a little smaller hole for secondary ethernet port, than normal 5070. So there is small bracket for securing Ethernet port from this : Aliexpress M.2 key A+E RTL8125B network card…
Description When using red dots, the proper way to aim is with both eyes open. This cover will force you to do that by blocking view through the window. When aiming with both eyes, you should simply see everything and you don't notice…
Small part printed solid for strength. Use PETG or ABS, pla is not recommended
I remixed Kalcemo's Bambu X1C Chamber Hygrometer to hold a Govee Bluetooth Hygrometer Thermometer H5075 I had laying around. It's visible from the P1S camera for when I'm not within bluetooth distance. I printed this at 0.1mm layer height…
This is a simple vesa mount for the Dell Wyze 5070. Features two mounting locations for 75mm and a single location for 100mm. Mount also includes 3 slot 4mm mounting fins on both sides with pull through slots for velcro or zip ties. Help…
Own a piece of automotive artistry with this 3D printable STL model of the BMW 507. This classic German roadster replica is perfect for automotive collectors and vintage car enthusiasts looking to display iconic design and timeless…
Govee Hygrometer (H5075) Magnetic Mount (12x3mm Magnets) For mounting Bluetooth connected Hygrometer in printer, drybox, etc. H5075 keeps history so you can keep track of dry box humidity and temperatures over time. No support Press the…
I made new battery cover for Lego Duplo Train 10507
This model is compatible with the lego system.
Replacement blade that fits thetford C400 series toilet. The post is redesigned as a solid cylinder (rather than fins) to add strength. Print in PETG or ABS for longterm use, PLA should also work but will degrade over time (possibly…
A small amount of support is needed for the screw hole. YMMV.
This is a wall mount bracket for the Govee H5075 thermometer. It uses two 3M medium command strips to attach to the wall. The strips are hidden behind the thermometer and the bracket has an opening to allow easy for removal of the strips.…
Summary Wall mount holder for the DELL WYSE 5070 with optional power supply mounting. The modular design allows the holder to be used with or without the power supply brackets. Print Settings Material: PETG (recommended) Layer height: 0.2…
IMHO the Wyse 5070 is still an excellent piece of HW considering it can host up to 32GB of RAM and uses very little power. Getting one from ebay is cheaper than a raspberry pi + PSU + case. There are shortcomings, too. The Wyse 5070 only…
Mount your Govee H5075 Digital Hygrometer Thermometer onto the door of your Bambu Lab P1 Series or X1 Series printer to conveniently monitor the enclosure's temperature and humidity.
BMW 507 Series 1 Convertible Old Red Sport Car
Recently got a Dell Wyse 5070 to use for OpenWRT router at home. It needed a simple way to be wall mounted, that still allowed dismounting for adjustments or relocation. Issues that require careful consideration: Depth of vesa screw…
Halter für den Dell Wyse 5070 thinclient zum Unterschrauben. Klemmelemente halten den thinclient in Position, sodass er sich in keiner Richtung bewegen kann. Es gibt zwei Versionen, ich habe die geschlossene Variante gedruckt, wer…
Replacement for Thetford camper WC. I tested on my C250 , should be also compatbile with C260 . The two upper walls are more thick than the original to ensure better strenght. Version history 2024/05/09 - Version 1.0 - First public…
Cover per scheda video Msi RTX 5070 Ti 16g Ventus 3X
Flügelmutter für die Rücklichter des Dodge Challengers 2015 Artikelnummer 6507357AA Gedruckt in PETG mit 4 Wänden
please leave a comment after printing this model, it will help the development of this line of key chains/пожалуйста, оставьте комментарий после печати данной модели, это поможет развитию данной линейки брелков
Quick and dirty cover for the new Holosun 507 Comp until manufacturing companies catch up with it. Just a basic box with the dimensions for the 507. Tabs added to the box to help keep it attached.
Disclaimers: The maximum core temp of the 5070 Ti is ~88C while the maximum GDDR7 temp is ~95C . This is to say that my temperatures at stock were perfectly fine and there was no real reason to do this. I suffer from the 'lower number at…
adapter for 140mm fans, uses original fans screws, and M3x5x4 inserts with M3x35 screws for new fans. NOTE: for full cover you will need to bend 2 radiator's cable hooks
I designed this stand because most existing solutions were either too bulky or omplicated. This design focuses on simplicity, stability, and clean looks. The stand consists of two separate legs that securely hold the device in a vertical…
Govee Holder to any Pole with a diameter for 16mm (mine is pretty Tight). Printed in ASA!
EN This bracket allows an external “Western Digital Elements Portable 320GB” USB hard disk to be attached to the VESA mount of a “Dell Wyse 5070” thin client. The corresponding (chaotic) model file for FreeCAD is attached. (Translated…
I liked ZeroDotCMD 's model but I wanted some added airflow
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism illustrates the transmission of power by simple pulleys…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing Speed-pulleys are used for lathes and other mechanical tools, for…
It's just the travel kit FormD makes but for my GPU, here's the original: https://formdt1.com/products/t1-gpu-travel-kit
Struggling to switch to having both eyes open now that you have a red dot? Print this cover and now you have to have both eyes open to see any targets, or just cover the optic with blue painters tape... but you have a 3d printer, so…
I made this after going down one too many rabbit holes on how to make my rack more compact and hide the power brick. Here's the power brick I've designed this model around: https://www.amazon.com/dp/B0CLKD3N2G With the charger and…
I pasted Q508left and Q508right with some pieces of double-sided tape on a plastic sheet. There are holes to access USB and DC connectors in the left side. Material: PLA Support: No Nozzle Diameter: I use 0.6 mm
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This is a method of engaging, disengaging, and reversing the upright…
I (re)designed this support bracket to provide better stability for an MSI RTX 5070 Ti Ventus 3X graphics card inside an
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This is a method of transmitting motion from a shaft at right angles…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and only 3D printed parts are needed (except for the belts). Happy printing Another method of effecting the same result as No. 3 , without…
Jeep Grand Cherokee 2012 Model, headlight fender cap cover tested, workds perfectly
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This is a method of transmitting motion from a shaft at right angles…
This support bracket is provide better stability for an MSI RTX 5070 TI 3x Shadow graphics card inside a Fractal Design Define 7 case.
Собираю свою домашнюю лабораторию из своих dell optiplex. Это самый сложный проект для меня. В качестве каркаса используется алюминиевый профиль 20х20 под паз 6, найденный где-то. Соблюдн стандарт передней панели, соответсвующий…
Remove the lower sheet metal castor bar. there is one nut on the bracket. remove the pin from the castor part with a tool. print this part and put the old castor back into it. reassemble.
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism differs from No. 1 in the substitution of a crossed…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing By giving a vibratory motion to the lever secured to the semi-circular…
Komplette Anleitung unter complete documentation at https://cool-web.de/3d-druck/ersatzteil-selbst-gedruckt-dahle-507-papierschneider-repariert-cut-cat-rolling-trimmer-gummiring-ersatz.htm Category: Office
The 3D base model is not entirely made by myself. I tweak the GPU Anti-Sag from EIGA's ASUS Pro Art 3D file and the Back Panel from FormD official website for the ASUS Pro Art 3D model (although the model also made by EIGA...) I build…
I have found my 2017 Sub Legacy has a two port USB 'hub' in the cubby below the dash, which is not compatible with the adapter cables available on Crutchfield (Metra AX-SUBUSB2 USB Port Adapter or IDataLink Maestro’s equivalent cable).…
We are using Axis M5074/M5054 and M5054/M5055 camera underground where they can be exposed to water, this mount will prevent water ingress from the back. Can either be mounted on standard Unistrut or for less permanent install there is…
Me quedé con el frontal del cajón en la mano, he encontrado la referencia de la pieza en ebay pero me he animado a hacerla en tinkercad con buen resultado. El cajón está en su sitio con un coste ridículo. Por si a alguien le hace falta la…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism resembles No. 1 , with the addition of a movable…
Allows for precise drawing of an ellipse. Printing with standard parameters and very simple assembly. At the end of the handle there is a place to thread a pen or pencil to draw the ellipse. Assembly: place both sliders into the base…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing Cone-pulleys are used for the same purpose as No. 8 . This motion is…
All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts). Happy printing This mechanism is a modification of No. 9 , the pulleys being of…
I made this model for my Jenn Air TC507 trash compactor. The control knob is actually a key that can be removed so that a child could not operate the machine nor can anyone stick a screw driver in the hole to make it work. I created this…
I made lid for battery container of original Junkers 8700505075 part. You should print it from temperature resistant material. Original box is made from PA66 - Poliamid I made mine from PETG. Gasket made from TPU filament. You can weld…
I bought an M.2 ethernet adapter for one of my Dell Wyse 5070 machines. It was a slightly different form factor than other M.2 ethernet modules I used in the past. I designed this part to use four M3 6mm flat head screws and two M3 heat…
Replacement Radley cordless trimmer line box cover. The retail 'replacement' covers did not fit the trimmer so I modeled my own. Printed using PET-G. Specific part#s: 5073-047 - 3160090101 Covers in use were printed on a X1C using PET-G…
This is a simple GPU Sag bracket that works with the ASUS PRIME RTX 5070 Ti. This bracket is designed to work with the NZXT H9 Flow/Flow RGB. But it should work with other cases as well; test before. Hardware: (affiliate links) 2x - M3x10…
BMW 507 Roadster 1956-1959 Racing
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
Leuchte von Fischer Leuchten, 6 Arme, der Fussständer ist mit Beton ausgegossen. nach 14 Jahren hat sich der Beton zerlegt und das Kunststoff ist in alle Einzelteile zerfallen. Der Fuss muss bei mir in 2 Teilen gedruckt werden. 240mm…
See the repository on Github Customizable, 3d-printable A5 alignment stop for the Dahle 507 paper cutter.
I printed without top and bottom layers to ensure that there's no internal volumes that can expand when heated. Also, external perimeter extrusion width 0,50mm and otherwise perimeter extrusion width 0,55mm. 0,4mm nozzle. Detect thin…
A quick way to add a Govee H5075 to your rack! Hardware needed. (McMaster-Carr links) 4 X 90695A035 (Comes in a package of 100) https://www.mcmaster.com/90695A035/ 4 X 91290A144 (Comes in a package of 100)…
A Cover for the Holosun 507C/407C This allows you to cover the front of the optic, but it still allows you to put the dot on target as long as you shoot with both eyes open, you can still put the dot on target. I found this effect out by…
Dell Wyse 5070 for 19-inch 1U rack.
Einfach den Rollenschneidekopf ausbauen, von unten kommt man an die Achse des Messers. Die Achse kann man nun etwas in Richtung Rollmesser drücken und mit etwas kraft das ganze herausziehen/hebeln. Danach einfach das Kunststoffteil als…
