Search results: 571

Lego Compatible (15712.dat) Tile 1 x 1 with Clip (Thick C-Clip)

This model is compatible with the lego system.

57180 Oil Filter Plug Tool

Threads into the filter for a secure seal so the filter can be removed from the tight space without spilling oil. Suits: 2013-2019 Dodge Ram Cummins Chrysler Part 5083285AA Oil Filter

UA 571-C Automated Sentry Gun

First of all this is my first upload and it's still a work in progress. One of my absolute favourite movies is still Aliens Special Edition and the best part of the movie are the scenes with the sentries. This is my version of the UA…

Low profile bracket/baffle for BCM5719-4P nic in a Lenovo ThinkCentre M920q

This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…

Lego Compatible (87571.dat) Minifig Headgear Headdress SW Twi'lek

This model is compatible with the lego system.

Lego 15712 (Tile 1X1 with Clip)

Lego 15712 (Tile 1X1 with Clip)

Kreg Accu-Cut tracksaw adapter for DeWalt DCS571 Compact Circular Saw

This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…

Volvo Front VVT Cam Seal Drift (9995718)

General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995718 or 999 5718), but it is hard to get and if you can get it, it's…

IKEA Part # 145718 # 159553

Cut in half for best results and strength

Lego Compatible (13571.dat) Minifig Tomahawk with Flat-Silver Blade

This model is compatible with the lego system.

Volvo Front Cam Seal Drift (9995719)

General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995719 or 999 5719), but it is hard to get and if you can get it, it's…

Festool Parallel Guide (495717) Hanger

I made a simple hanger for the Festool 495717 FS-PA parallel attachment guide rails. I could not find a model for this attachment, so I quickly put something together that suits my needs. If it is of some benefit to your workshop, I would…

Lego Compatible 5713.dat - Technic, Axle and Pin Connector Hub with 3L Axle

This model is compatible with the lego system.

Costco IRIS 12.9 buckle up storage tub dividers #1410571

Costco item number #1410571 IRIS 12.9 buckle up tub Wife wanted to replace the cardboard dividers she was using with something a little more durable. PLA adjust infill/walls as you see fit

Volvo Front VVT Cam Seal Drift - From Reference (9995718)

I borrowed a cam locking tool and VVT seal drift from a friend for a VVT hub + cam seal job, and figured I would measure it and sketch it up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of…

Pot for water testing for Modular Hydroponics Tower by Thingiverse (5712775) / Topf zur Wasserprüfung für Modular Hydroponics Tower

Pot for water testing for Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. The pot can be printed multi-material or single material. How it works: Place the pot in the tower…

Festool Cleantec D27 to Dewalt Atomic Circular - DCS571

This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw. Pretty straightforward, I tried to keep it compact and close to the original. I'll post adjustments if I make any. Fusion 360 file…

Replaceable filter for Modular Hydroponics Tower by Tingiverse (5712775) / Wechselbarer Filter für Modular Hydroponics Tower

The Modular Hydroponics Tower by Thingiverse (5712775) is a great model, but I was bothered by the fact that I couldn't properly clean the filter, which is unfortunately permanently integrated into the model. That's why I designed this…

Funnel for Modular Hydroponics Tower from Thingiverse (5712775) / Trichter für Modular Hydroponics Tower von Thingiverse (5712775)

The funnel fits on the IKEA muscovado lid and 5-gallon lid of the Modular Hydroponics Tower from Thingiverse (5712775) . Thanks and regards to Luitzor for creating the tower. Printing: Material: PETG (certainly also printable with PLA but…

IKEA 10039571

Piece with the same measurements as IKEA 10039571 for use on the back of the METOD furniture

GridLink 2 1/4" Squares Chessboard, FIDE Compliant (GLH5712-050_Chess)

GridLink-Chess : A modified subest of the GridLink system , for a traditional 2.25 inch square cornice edged chessboard that meets the requirements of the Fédération Internationale des Échecs (International Chess Federation) for…

Commodore 1571 Front Clip

Sand or file down the broken clip like shown in pic 1. The part should fit nice and tight without any glue. Will also work if the clip has completely snapped off. Category: Computer

lanos/sens 95710903 heather part

fully accurate re-ingenered original part

Real Appeal HL-2571 Blender knob replacement

Replacement knob for the Real Appeal HL-2571 blender. My original eventually snapped in half so I modeled this in Freecad and printed it in pla. I've included the Freecad design files and a step file if you want to modify, as well as the…

Commodore 1571 Assembly Helper for Mitsumi Read/Write Heads

This is a little tool that very few people will ever need, but it's time to share it anyway. Over the past few years I've repaired a couple of Commodore 1571 floppy disk drives. I had to remove the read/write heads from the Mitsumi-built…

5715365 BENDPAK DANMAR LIFT PAD

Basic model of the generic lift pads you will see for Bendpak and Danmar lifts. May work for others. Designed to made out of a flexible material so it can be flexed over the metal pads to prevent them from falling off. PLEASE use the…

Ehemalige Katholische Kirche 35713 Hirzenhain Bahnhof

Das Modell der ehemalige Katholische Kirche Zum Heiligen Kreuz in Hirzenhain Bahnhof (Ortsteil von 35713 Eschenburg) ist das erste einer vorgesehenen Reihe von Modellen in absehbarer Zeit profanierter, umgebauter, umgewidmeter oder…

Volvo Front NON-VVT Cam Seal Drift - From Reference (9995719)

I bought a NON-VVT seal drift to measure and sketch up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of walls (4 or more? Go nuts, I did 4 for this one. On the VVT one I did 10 since it's one…

Commodore 1571 power supply plate

I had a commodore 1571 floppy drive without a power supply or PSU mounting hardware, so I designed my own. You can mount a Mean-Well RD-50A, PSU, an IEC connector and a KCD3 (30x11) power switch. Fusion360 design file attached.

Bike Handle_v01_Loctite 3D IND5714

Gripperinlet_v01_Loctite 3D IND5714.STL

Adjustment wheel Micrometer Mitutoyo 2075712

replacement micro adjusment wheel for a MITUTOYO 0-25mm micrometer. Category: Parts

LST ring for plant pot for Modular Hydroponics Tower from Thingiverse (5712775) / LST-Ring für Pflanztopf für Modular Hydroponics Tower

LST ring suitable for the plant pot for Modular Hydroponics Tower by Thingiverse (5712775) . The ring is attached to the bottom of the plant pot and allows you to secure your plant in 9 positions with binding wire up to 3 mm thick. Thanks…

Hymer Camp 544K Motorhome - Waschbeckenauflage links (Hymer ID. 120571)

Ersatzteil wegen Bruch (siehe Bild) Spare part due to breakage (see picture)

Yamaha Receiver Remote Undermount, RAV571 Remote

Fits remote for Yamaha AV Receiver RX-V2085 RX-A2080, RX-A3080. Can be mounted with sticky tape or 4x 6/23 screws (or equivalent).

soft jaws for roct (gost) 4045 5711 140 vise

Print as strong as you can for obvious reasons. I used: 5 perimeters 5 top layers 40% infill filament rosa 3d PC-PBT+15GF

Filter stretcher Philips humidifier HU5710 / FY5030

Suitable for Philips humidifier HU5710 / Filter part number: FY5030 A part to stretch the filter back to normal size. My filter shrunk in size after cleaning (possibly too much). Currently the replacement filter are out of stock, so it is…

Motorola T5710 Compatible Antenna Cover

Motorola T5710 compatible antenna cover. Radio comes apart with 4 screws, 2 behind the battery cover and 2 behind the display cover. I printed out of TPU 95.

VASE PULSE 571

Parametric 6.0cm tall object with pentagonal 5-sided geometry and a pulse pattern. Engineered for precise 3D printing.

Lego Compatible (35714.dat) Minifig Hair Female Parted in Center Two Braids Hanging in Front

This model is compatible with the lego system.

Kreg Accu-Cut tracksaw adapter for DeWalt DCS571 Compact Circular Saw

This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…

Volvo Front Cam Seal Drift (9995719)

General Pressing in camshaft seals can be challenging and if not pressed to the right depth or pressed in crooked, they will leak. Volvo used to make a special tool (9995719 or 999 5719), but it is hard to get and if you can get it, it's…

Lego Compatible 5713.dat - Technic, Axle and Pin Connector Hub with 3L Axle

This model is compatible with the lego system.

Volvo Front VVT Cam Seal Drift - From Reference (9995718)

I borrowed a cam locking tool and VVT seal drift from a friend for a VVT hub + cam seal job, and figured I would measure it and sketch it up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of…

Volvo Front NON-VVT Cam Seal Drift - From Reference (9995719)

I bought a NON-VVT seal drift to measure and sketch up. Here it is! On eBay here if you can't print yourself. I suggest printing with a high number of walls (4 or more? Go nuts, I did 4 for this one. On the VVT one I did 10 since it's one…

Habo 571 115x33 hinge router template

Simple template to route out recess for hinge Habo 571 version 115x33

Lego Compatible (5712.dat) Bracket 5 x 1 x 1.333

This model is compatible with the lego system.

Lego Compatible (15571.dat) Slope Brick 45 1 x 2 Triple with Bottom Stud Holder

This model is compatible with the lego system.

ORGANIZZATORE GT571

ORGANIZZATORE GT571 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W

Kärcher Cap 5.063.571.0

Replacement cap Kärcher 5.063.571.0 Adaptable for e.g. : Kärcher K 620 M Kärcher K 630 M Kärcher K 630 MS Kärcher K 635 M Kärcher K 640 M Kärcher K 645 M Print in PETG, ASA or ABS. Supports are needed.

Gridfinity - Canon Cartridge C-571 (4x)

This is module 2x3x6 and 2x3x5 of gridfinity storage system. Material: PLA Nozzle: 0.4 Supports: Not required Two heights, 6U - because that is the height I usually use, 5U - for saving some filament. If you do not know the gridfinity,…

Dewalt Atomic Max 20v 4.5" Circular Saw DCS571 Angle and Depth of Cut Adjustment Lever

It works quite well. Print it in PLA with at least 50 percent infill.

Fully Functioning Retractable Bow Planes for SSN-571 Submarine Model 1/72 scale

See video of repeating servo test of the prototype of this design here: https://vimeo.com/947163639?share=copy The USS Nautilus SSN-571 submarine model created by Liebe Grüsse Marc of cgtrader is outstanding. However the model does not…