1,193 models
This Peterbilt 359-inspired truck is made in such a way that allows it to be printed all in one piece. Once it's done, you can pop it off your buildplate and play with it. The wheels spin, the hood opens and the sleeper cab door on one…
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…
Happy to present my TR-590 Mk X tricorder kit! Update 1/28/24 - Added versions of the Body with built-in support feet that you can break off with pliers afterwards. They firmly hold the corners and edges down to prevent curling up. You…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
Rafts: Yes Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA In the quaint town of Bellissimo, there was a charming Fiat 500 named Bella. With her vibrant red paint and retro design, she turned…
Halter für FritzBox 7590 AX um diese mit 2 Schrauben an der Wand zu befestigen. Den Halter kann man auch so als Tischständer benutzen damit das Gerät eine bessere Belüftung von unten bekommt. Drucken im PrusaSlicer : bei den Haken…
This model is compatible with the lego system.
Version of Halo Reach Commando helmet using helmet from Halo Reach - Noble 1 - Carter - A259 - Mark 5 armor set including Helmet as a base. Added details referencing Halo Reach from MCC on PC version. Neck separated from the rest of the…
Finally some prints of my own (12-08-23) I finally received my Prusa Mk4! I have the ability to rapid prototype a lot faster and have uploaded a new design with many small changes. The overall look hasn't changed but I'm getting good…
simple leg to place the FRITZ!Box 7590 in an upright position. Print instructions You need to print two pieces. Update Added a version with legs approx. 14 mm longer for better clearance with thicker cables.
Simple and light enclosure for the LM2596 Buck converter There is a lid with text, and with no text. .step file included --------------------------------------------------- My settings: PETG Layer height: 0.2 Perimeters: 3 Infill: 15% No…
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
Hello there this is a simple case for the popular cheap DC-DC converter modules (LM2596(S)). Route the cables through the case bottom before you solder them to the DC-DC converter. Easily resized and customized in Fusion360 with the…
I have re-mixed this part to include a hole for the feed wire to the LM2596 in the back of the case, also increased the length of the LM2596 mounting holes as the smallest M3 screws i have where too long, also notched the two nounting…
I wasn't happy with any commercially-available options for this and the 3D-printable solutions I found online were iffy, so I made this design! This model is intended to be secured using 4 or 8 M5 heatset inserts, and 12mm-long bolts…
A tool-less, snap-fit enclosure for your LM2596 buck/step-down converter that should snap-onto any 2020 extrusion without extra hardware. This enclosure also allows you to keep your wires separate via the outside channels or together in…
The model has been cut into several section to be able to print it without support. It has been increased in size to a length of 250mm. To make the lineup for the gluing easier FilaPins are added to each cut. For that you will need 6…
I really liked @blackboots2_227840 LM2596 case design , but it didn't quite fit the version of the LM2596 converters I had in hand, namely, the board and case screws weren't aligned (there was about a 1mm difference) and the top case…
I want to create a stand for the FritzBox 7590 AX V2 which provides the following features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should be…
This model is compatible with the lego system.
Designed for: LM2596 buck converter (see image)
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm
This model is compatible with the lego system.
I used countersunk screws to give cleaner look. Hope you enjoy!
I remixed a Fritz!Box stand for the 7590. Made it higher so the connectors fit underneath. Also added a second version where the Fritz!Box is leaning a little bit backwards. Remixed from this:…
Wandhalterung mit Kabelzuführung von Unten und guter Belüftung der Fritzbox. Gedruckt mit 65% Infill in ABS. Stützen aktviert um die “Nasen” der Halterung sauber zu drucken.
This model is compatible with the lego system.
I Wanted to double sided tape it so I needed a version without the reinforcement behind. So I've slice it in PrusaSlicer. And I've print it at 102% (When you play with scale more than once in prusaSlicer this scale add up! be sure to…
Remington 597 magazine. Print Settings Printer Brand: FlashForge Printer: Dreamer Rafts: Doesn't Matter Supports: Yes Resolution: .100 Infill: Your choice, I used 45% honeycomb Filament: Proto Pasta HTPLA CF Black CF Category: Sport &…
Copy of the original OPSol adapter for Mossberg shotguns. Adapter allows use of 12ga 1.75″ Birdshot, Buckshot, and Slug Shells Only fits: 12ga Mossberg® 500, 500A, 590, 590A1, and Maverick® 88 models, and the 12ga Shockwave Firearm Should…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to try designing a…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
There are many Buck Converter enclosures posted here, and none would fit what I thought was a common 1-button LED Buck Converter (66mm x35mm), which I bought on amazon. (…
This model is compatible with the lego system.
This model is compatible with the lego system.
Rackmount für die FritzBox 7590 im 19 Zoll Serverschrank. Dabei können die Anschlüsse der FritzBox über bis zu sechs Keystone Adapter nach vorn herausgeführt werden. Folgendes wird zur Montage der beiden Teile benötigt: 8x…
I like the original model, but I wanted to be able to mount it to the underside of my Ikea Lack table. So I added two tabs for wood screws. Edit 1.4.2023 - Model slightly adjusted for easier printing (side vents)
LM2596 Holder for DIN-Rails Category: Electronics Based on Models by Greg Cormier (https://www.thingiverse.com/enkoopa/designs), 3DPrintSOS(https://www.thingiverse.com/fedorsosnin/designs) and Jens Petersen…
For an original look-and-feel, print in woodfill PLA. For maximum sturdiness I chose 5 perimeters and 50% infill. Organic supports where needed. 0.6mm nozzle height and 0.25mm layer height works great. I've experimented a bit with the…
As the Cable Fritzbox Modem doesn't come with a built in wall mount, i designed a simple one wich will do the job with ease. no special settings needed
UPDATE 2025-08-21 Based on some reviews and comments, I've revised the models and this time separated the models for the 7590 and 7590AX. I've moved the mount for the 7590 slightly. I removed the covers from my cabinet and my neighbor's…
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 25mm Type: DriveDog 3,7mm
So I was looking for a case for an AZ-Delivery CP2102 USB to TTL Converter (https://www.amazon.de/gp/product/B07N2YLH26/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1) and found this model on Thingiverse:…
This project provides the models for a printable vacuum clamping system utilizing the Dewalt Grabo DCE592B lifters. All fittings are ¼" push connect lines and ¼" NPT thread. BOM Dewalt Grabo DCE592B lifter Minwax Polycrylic sealant 1/16"…
I seperated the eyes and eye rings so you can print them in different colors.
Based on the ingenious design by jwags55 . This remix is designed to fit the typical LM2596 buck converter. It should be a tight fit on 35mm DIN Rails and hold the converter securely. Use two M3x10mm Bolts and nuts to secure it to the…
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
This is a super simple holder for a LM2596 step-down buck converter module, it helps with mounting the module within a larger enclosure without shorting anything out. I bought this particular module from Banggood at the link here:…
Ergänzung 11.01.2024 Habe eine Ausführung mit Aussparungen für den TAE und USB-Anschluss hinzugefügt. Diese habe ich nicht getestet. Bitte um Feedback, wenn es nicht passt!!!
Another LM2596 Case. None of the other LM2596 Cases I found quite fitted the Buck that I have, so I created my own. I made the button pin longer than necessary to allow for "stick out" choice. Hope it's useful. I used 4 x M3x15 screws.…
This is an stand for Fritzbox! 7590 (don't fit to 7590ax) it provides the folloging features: parts shall easy to mount to the Router the router should be placed tilted to have a good ventilation to the board inside all connector should…
This model is compatible with the lego system.
This is a snap fit enclosure for a LM2596 Buck Converter with a voltage display and PCB mounted screw terminals. No fasteners required! It does not have additional mounting features but could easily be mounted to a flat surface using…
This model is compatible with the lego system.
Case and spot welder holder. The cover has button extensions included.
Note: Doesn't fit Raspberry Pi 4 - see the original model for that Be sure to use supports. A drawer insert to house a Raspberry Pi 3B and a LM2596 Step Down Converter. In the final model I added holes in the back so you can run the…
This model is compatible with the lego system.
This model is compatible with the lego system.
I changed the dimensions for this module. https://www.amazon.de/dp/B081N6WWJS?psc=1&ref=ppx_yo2ov_dt_b_product_details
3D PRINTING SETTINGS Nozzle: 0.4 Material: PLA Layer hight: 0.2 Infill: 20-100% Print it with multiple colors: Base color is black. Insert filament change at 1mm hight. Next filament change is at 2mm hight, insert the color you want the…
Couldn't find a bracket model for my LM2596S buck converter that fits to a DIN rail or DIN rail clip, so I designed my own in fusion. Uses a DIN rail clip, I used the heat insert version from @Maxstupo…
Speaker adapter for Alfa Romeo 159 (potentially compatible with other models). Dimensions: Diameter of the bottom side circle - 170mm Distance between the outer holes for screws - 125mm Distance between speaker screw holes - 110mm Outer…
This model is compatible with the lego system.
LM2596 DC-DC Case. Ideal for mounting on 40x20 aluminum profile. Category: Hobby --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through…
With this mount and the 97222-din-rail-bracket , you should be able to clip it onto a DIN rail. The F360 file is also here if you want to modify it; it's pretty messy. Warning : Don't just print this out and expect it to work; I found…
hello, this is the basic model of the case for this mobile phone, which copies its curves and protects not only the camera lens from scratches. Enjoy, made with love
This model is compatible with the lego system.
Small buck converter mount meant for the Voron switchwire/enderwire
I didn't quite like the other taller remix versions of this great under desk drawer by Paul, so I remixed my own. Solid and hex bottom versions are provided. Versions with custom corner brims are available if you think you will have…
Rackmount 19" for the FritzBox! 7590AX. This rackmount does not route the rear connections to the front in case this is not required or they are not used at all. To mount the two parts use some M3 bolts.
Pick a drawer, then make it yours. The front is up to you. Decor drawers take swappable faceplates and handles, so you can change the look anytime without reprinting the drawer. Print the body in budget filament and save the fancy stuff…
This is an ambidextrous wall mount for a Mossberg 500/590. It is ambidextrous, it can be mounted from either direction based on assembly. It includes the following mounts: Standard W/ Defender Tactical shell adapter 2x Ø4mm x 40mm screws…
This model is compatible with the lego system.
Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external. The links have an integral support that will need to be snapped off and thrown away after printing. The standard link cap somewhat restricts the internal space when in the…
This model is compatible with the lego system.
Coax is expensive, protecting your connectors from dirt and damage helps extend the life. Protect the ends of our PL-259 coax connectors with these little plugs. Add a bit of cord to leash them to prevent loss and ensure they're always…
Hi ! A small universal snap-on module for the regulator assembly based on the LM2596 Designed not in 'Gangnam style' but in 'prusa I3 MK3' style Cover specialy designed for my 2 projects related to the Prusa I3 MK3…
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper without brakes according to DIN5963. Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame…
LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable module.
I like the original honeycomb box, but it is too small to hold my glue bottle. I did the lazy thing, here, and remixed the original to my specific needs. All I did was: import the original model into Microsoft 3D Builder split the hex…
Small case for a LM2596 based step down converter with an LED display. I use small screws to fasten the board to the bottom plate, but since they are to long I print also a set of spacers. There is also a backplate with wall mount holes…
DUMMY 13 HALO SPARTAN ARMOR Descrizione PDF This model is a modification of the DUMMY 13, follow the Soozafone rules , in particular: the frame must be printed in ABS or PETG, PLA is NOT suitable! Please post makes! Don't forget HALO…
This model is compatible with the lego system.
This model is compatible with the lego system.
Simple LM2596S box with lid (snap on), 2 to choose: one with creality logo, one without logo. Box model attach with two zip ties.
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper with handbrake according to DIN5963 Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame with…
These voltage regulators come in several variations. Some have the polarity in the opposite orientation, some don't have a display, and some have different capacitors or terminals that effect the height. The model I based this on modifies…
Thing 1625233 doesn't work for my boards, the holes in the board are wrong and the trimpot is off to the side. The pins that go through the board are too thick and I had to cut them off. I think there may be a few slightly different…
This model is compatible with the lego system.
This model is compatible with the lego system.
Package LM2596S DC-DC step-down voltage regulator Adjustable LM2596S DC-DC Buck Converter Step Down Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with Digital Voltmeter Display USB Worx HUE without writing Can be…
Print with 0.1mm layer height for the best snap fit. No supports needed. (The lid in the photo is the old version)
[M10 Manpack] Ultra Portable Antenna Kit vertical HF antenna with optional loading coil i needed to create a super compact antenna kit utilizing all M10 threads. it enable the user to use the very cheap telescopic whip, loading coil and…
Turn your wall into storage. Screw up a bracket, hang the cases. The bracket goes on the wall with a few wood screws, and the cases hang on it: the screw heads slide into the keyhole slots in the case back and the bracket nests into its…
