530 models
A 2.5inch (63mm) diameter three-jaw chuck. The three self-centering jaws are reversible to allow holding larger work pieces. To fit them in the normal orientation, as shown in the photos, insert them in to the slots in the order A-B-C. To…
Overview OpenSCAD project to create a cage that fits in 3 5.25" drive bays and holds 4 3.5" hard drives using rails. Optionally supports a fan shroud to provide additional airflow to the drives. You need to print: 1 cage-cage.stl 8…
Cover Panel for 5.25 inch optical drive pay on a PC case. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same hook-length for their Drive-Bay covers. Measure the hook positions of the drive-bay…
BOM Part Qty Image M4 Heatset src 1 src 2 12 M3 Heatset src 1 src 2 8 M4x5mm (BHCS preferred) 7 M4x10mm (BHCS or SHCS) 5 M3x10mm (BHCS preferred) 8 Jonsbo N3 Backplane src 1 (verified) src 2 src 3 src 4 I also designed a 7-drive version…
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
I printed with 40% infill ABS for better structural rigidity and heat resistance.
(Update 11/25/2019) Added the latest version STL files (that matches with IGES ones). (Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Elecrow 5inch…
Flexible 2.5in (63.5mm ID) segmented/modular hose system designed in such a way that all parts can be printed in vase mode for faster prints and to ensure a good seal between each component. The hose is capable of 90° bends with 6…
Gopro mount on FPV dron. Tested on Gopro 9 black.
Welcome to the improved revision of my snap-in pipe clamp design, now with more diameters and additional wall distances! This versatile design is optimized for the FFF process with various filaments, ensuring a quick print without…
I designed this pod for use with inexpensive Pyle Audio Marine Speakers . Will probably need dimensional adjustment for correctly mounting speakers from different manufacturers. Includes two small drain holes, wiring hole, and adjustable…
Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…
Lightweight, low-profile wheel chock with 5.5 in wheels. Should clear any wheel pants. Ribs on the wheel chock should help the chock stay in place. Holes for a rope or bungee cord. Printed with ASA. The model file has a plain front does…
0.75in. 19mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
A pipe joiner that joins 0.75in.(19mm.), pipe to 0.5mm.(12.5mm.) pipe. PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
0.5in. 12.5mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
As we all know the Orbital Sanding Disc Paper can get messy, this is a way to organize it. There is one of each model, stackable, or non-stackable
This fits around a 38mm or 1.5in roll cage or roll bar tube and holds a standard GoPro mount. It is designed .25mm small to allow for clamping force and has space for M4 hardware to fasten it. The standard GoPro mounting hardware will…
www.davidh.cz Gopro Hero 9 black tested FilaFlexible40
this is basically the same mandrel of the Ivan’s V2 ECM set. but there have been 2 pin’s added so it can be used upside down like the with the V3 ECM set from ImmortalRevolt. but be aware that the V2 from Ivan and V3 from ImmortalRevolt…
ESP32 5inch Touch IPS LCD Screen Case I recently purchase this screen from Ali Express. ESP32-S3 HMI 8M PSRAM 16M Flash Arduino LVGL WIFI&Bluetooth 5 " IPS 800*480 Smart Display Screen 5.0 inch RGB LCD TFT Module. It's a gorgeous 800 x…
Simple Laptop Stand for 13 to 15 inch Laptops. Two Versions, one is snapfit the other with heatinserts and screws. Both versions are rigid, therefore the tolerances are quite tight! If you don't calibrate your filaments, don't think about…
There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…
A Headset / Headphones hook that attaches to the front of your PC tower. It is made to fit as a cover to one of your 5.25in optical-drive bays. It is currently configured to fit a CoolerMaster Mastercase Pro. Not all cases use the same…
Unfortunately this display has the USB-Micro plug at the bottom (or top if you want to rotate), so one stand is very big in order to accomodate. You can use the smaller one if you purchase a usb cable with a 90deg micro connector* The…
Print without supports Controller 5V-12V-DC-Brushless-Motor-Driver-Board-Controller-For-Hard-drive-motor-3-or-4-wire-p-1018624…
Remixed to fit for 31mm and 1.25inch Washers to Blockmit for Cold Wallet to Backup Crypto Seed Phrases
Why buy when you can CAD. I still had to purchase the hose to carry the water to a better area away from the house. The knob is a press-fit (at least on my printer) for an M5x25 bolt typically found in printer fastener kits. The hole is…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
This should fit most Fords with the stock 6x8 speaker and adapt it to the more common 6.5in speaker. Fasteners: This uses M4 or M3 threaded inserts to hold the speaker in place. There is a 2mm 60 degree chamfer on the opening for the…
update: I've made the license commercially available to you. I like to pay it forward as I have made my share of money off of free models. Anything that can potentially make someone's life or health better, I will release as commercially…
5 inch fpv freestyle frame You are free to make your own changes and improvements!!!! i will be very happy to see this frame being improved!! for assembly you will need the gravity loss standoffs,double nuts and: 14x m3x6 4x m3 x20 2x…
Introducing the 3D Printable 2.5-Inch SSD Storage Holder: a sleek and practical solution to keep your valuable solid-state drives organized and easily accessible. This compact storage holder is designed with simplicity in mind, allowing…
Seat Risers for the Oldtown PDL's will definitely give you a better angle for pedaling and also relieve the stress on you knees and back. Will fit the Sportsman 106 PDL and the Salty PDL. Material: PETG Infill 30% Perimeters: 6 Nozzle:…
Simple drive cage to hold six (6) 2.5" hard drives. A toolless drive tray is included and may need to be scaled in thickness depending on the thickness of your drives. Requires one M2 x 8mm retention screw to hold the closure bracket. All…
Improved outlet cover shelf for 3in x 4.75in outlet covers. Changes: more edge bevels for better corner quality no side cutouts for less overhangs and better perimeter speed shelf legs are wide enough for full line widths instead of…
This is the second version of my print in place shaft collar for 0.5in hex shafts. I call this version the Banana collar! This new version is a total redesign of the old model, it improves the gripping force substantially and reduces the…
Designed to be compatible with MK6 Volkswagen and other vehicles that necessitate a 6.5-inch car speaker secured by 4 fasteners. Speaker installation is accomplished using M4 screws and nuts.
Two M3 x 25 screws and nuts for the hinge. Four 5mm x 3mm magnets glued in place to keep it closed. It should print well without supports. I have added the Fusion 360 file for those that may want to tinker with the design. I'm not much of…
Gridfinity storage container for 6 2.5inch harddrives or SSD drives. Made with https://gridfinity.perplexinglabs.com/. Printed with PLA, 0.4mm nozzle. No support needed.
For 4inch PVC pipe inside diameter, 4.5 inch outside diameter. New design: https://www.thingiverse.com/thing:2474497 Print Settings Printer Brand: FlashForge Printer: Creator Pro Rafts: No Supports: Yes Resolution: 0.2 Category: Outdoor &…
This part will slip into US pegboard (1inx1in) and has two pegs on the opposite side to fit into the mounting holes on the bottom of a Ryobi 18V battery charger. This prints as a single unit and requires no additional fasteners or parts.…
I will be adding more in the future with some additional edits to existing ones. This is an expanded variety from my previous upload. I made there specifically for some tools that have clearance problems or smaller diameter size dust…
First i wanted to do a remix, but it seems esier to just make a new one. This is a case for 5inch Capacitive Touch Screen LCD (H) https://www.waveshare.com/5inch-hdmi-lcd-h.htm mostely used for a Klipperscreen I use this for my Reprack…
Remix of Meister Edel's Fantastic Model to adapt to a 1.5in shop vacuum Hose commonly found on smaller shop vacuums such as the Shop-Vac 1 gallon models. The vacuum connection side is a friction fit and has a slight taper internally. The…
This model was originally made by a FRC team mentor by the name, “Aviv” on ChiefDelphi (ChiefDelphi Post Here) They share a Thingiverse Link however, it has been 404'd and unavailable since. Aviv also shared the model here on Printables…
5in (5in I.D 5.12OD) 6in(6.12in ID 6.24in OD) 4.5in high. Designed to attach the Harbor Freight 2hp Dust Collector 5in inlet directly to the outlet of the Oneida 4/5 Super Dust Deputy cyclone. Print time with PLA and standard Cura…
3.5inch HDD Rack. You can pull the hdd for easy maintenance
I created this to connect to standard IBC tote (shultz brand) with a garden hose for watering. Preferable to print garden hose tip down so the inside of the adapter is smooth.
What is it? Sanding block with a 115 mm width to match common sand paper roll sizes. It has two knobs to easily release a sand paper for quick replacement. Holding a large block on it's own might not be as comfortable so it has a handle…
Case for an XPT2046 LCD screen, usable in Raspberry Pi (or other) projects Hardware: 4x M3 16mm screws 4x M3 nuts
A case for the waveshare 5inch touchscreen with a raspberry 4 and a super slow fan for cooling. I used this screen: https://www.amazon.de/gp/product/B08H23KB1G/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 There you can connect the…
My first redesign ever -> redesign of laptop stand V2 to fit my Acer Predator 15 inch laptop. I removed the hooks because i don't need them and resized it, so it perfectly fits my laptop. Made the side parts a bit thicker so it is more…
This is a horizontal (box) or vertical (wall) mount for the Milwaukee M12 FIWF12 0.5inch impact driver. It mounts with a just a few screws. I use this for my box with powertoolholders (see my other models/collections).
Fast printing fence post topper for 5x5 vinyl fence posts. No supports required, print in the provided orientation. The “user” facing side prints on the bed, so you can use a smooth sheet for a nice smooth finish or textured or whatever.
Remix of the 2.5inch Three Jaw Chuck with a hex shank, to allow use with a standard drill.
Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…
Experimental work in progress, please provide feedback. Sized for 5in sanding disks common in home improvement stores. 1.25in ID vacuum attachment
I found the HDD rack made by Adalras and liked the design consept and applied it with a huge revamp on the design, it would moreso classify as my own design but i was inspired from his design so it only feels fair to call it a remix. This…
A floor flange for 1.5in PVC pipe. Designed to be used with M4 hardware. Support ring included - I used this flange for a mushroom grow tent, so having a backing ring was helpful.
French Cleat Sandpaper Storage for 5inch random orbit sanders with dividers and positioner for quickly mounting sandpaper onto the sander base. F3D file is included and fully parametric. 3/4inch french cleat attaches to the main body with…
I have a great controller for my 3D printer comprised of a Raspberry Pi Zero 2 and a 3.5in TFT screen running Octoprint and Octodash. But I wanted to bring all my electronics outside my enclosure to print hotter materials. So I designed…
I designed these to have 1.6mm walls a multiple of .4mm nozzle size, my printer has no trouble printing .8mm walls on a .4mm nozzle so 2 passes on the walls, your mileage may very. If you cant print them at .8mm walls you can do 4 walls…
This 2.5in drive tray fits HP Elitedesk 800 G4 (Possibly others). BambuLabs X1C Hatchbox Black PLA 20% infil All other settings default
This is a hard disk drive enclosure, with space to add this SATA-USB adapter https://www.amazon.com.au/UGREEN-Adapter-Support-Converter-Drives/dp/B01H1I9X60/ref=mp_s_a_1_5 If you have a different adapter, I've provided a STEP file for all…
This is an improved model based on lessons learned from my 2-½" battery charger pegboard mount ( here ) This part will slip into US pegboard (1inx1in) and has two pegs on the opposite side to fit into the mounting holes on the bottom of a…
Needed a case to store a 3.5in Hard Drive that wouldn't be actively used (so no need for openings to allow for connections, as other models had). Very simple case with a bottom and lid. Printed in TPU on Ultimaker. Came out a little…
If used outdoors print with UV resistant filament, such as Prusament ASA.
Snap-in vented cover for 5.25inch drive bays with vent fins to match the design of the HP Z-series workstations. Print with black PETG. // Print with inside surface to the printer bed. // Use tree support. // Turn on ironing. // Consider…
The coupler allows you to remove the dust box and attach a 1-7/8" shop vacuum hose. I use this one and I love it! You may have to sand down the inside of smaller part of the coupler to get an easier fit. Here's a link to the exact sander…
Adapter for the 36mm Kapex hose. It has the tabs built into the adapter which will click in and hold the hose just like a normal Festool hose. Printed with PLA with no supports (with the larger diameter on the build plate)
This is a case for the Elecrow 5Inch TFT Touch Screen (Resistance Touch) display. This display can be found on amazon (link provided father below). The display is sandwiched together with the PI using GPIO pins (uses 26pins). So far it…
// This is a reupload from makerworld of the remix by @penguinprints Gridfinity storage bin for 3.5 inch hard disk drives (HDDs), in 2x4x5 grid layout. This is a remix of a model by @thestevemarshall at…
Two piece handle for Series 40/15 (40mm / 1.5in) Aluminum Extrusion Included step file incase you need to make changes. I printed it upright, and on the side. And I think the side comes out better. I used tree supports and a brim when…
A simple wallmount case for the round 5in display from Waveshare. For wall mounting, only three parts need to be printed. There are two optional parts that can be printed to allow the display case to stand on a desk. STL Files can be…
Fitting to use 2.5in flex dust hose with standard 2.25in Shop Vac accessories including the Dust Deputy 2.5. I used the Wen hose available from your favorite online retailer. It will be a tight fit on the 2.5in side.
2002-2009 Chevrolet Trailblazer (and TBSS) front door speaker adapter for 6.5 inch speaker. Easily clears the inside of door panel and window to the rear with most typical 6.5in components or coaxial speakers. Print face up with minimal…
Replaces the CD drive and card reader and holds two 3.25-inch hard drives, but only the 19mm thick ones because, well that's what I needed the file for, and I didn't have enough room to work with 25mm ones anyway. But yeah, this is made…
A flag to turn your benchy into a filament swatch! These were designed to accept a 1inch adhesive label. I like putting the brand, filament type, and color on the front and printing specs on the back. I designed this to use with my…
This is a 2.5 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed.
Very simple hard drive adapter to put 2 2.5" hard drives in a 3.5" HDD bay where you have to mount to the sides. I used m3 threaded heat inserts for the mounting points but you could also use nuts.
Later Edit: updated to compensate for the pins that are sticking out thanks to our member DevoidTV all the help. if you printed the design already you can snip this pin out or print the new version. also I have increased the cutouts for…
The circlip that came with the original design ( https://www.thingiverse.com/thing:2670620 ) had a habit of getting pushed out of position when tightening he jaws. So I designed this alternate part that can be tightened in place to keep…
This is a model to attach dust collection to the 15A Corded Ryobi 7 1/4in Circular Saw (I believe it is Home Depot model CSB144LZK). The original dust adapter 200673002 is no longer sold. This model is not based on that adapter; it was…
My Newtonian Telescope design featuring a 4.5inch 114mm mirror shown here with a 900mm focal length. Super simple to build and designed with so many adjustments there are no mistakes you can't compensate out of the system. Uses very…
Einfache HDD-Storage Box für 7 Festplatten. Gedruckt mit PLA auf einem Ender 3 V3 KE mit 15% Infill
3.5in Oscillating Tool Pad Storage, prints in about 2hr with .25mm layer heights on most printers (0.4 nozzle). Tilted at a 20deg angle, finger hole for access, and hidden fasteners.
Adapter to mount cameras w/ EF-M (EOS M50 in this case) bodies to telescopes that use 1.25" eyepieces for prime focus astrophotography. I'm sure “proper” products exist from telescope suppliers, but what fun would that be. Supports will…
WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Makerbase MKS IPS50 5Inch Display Integrated in the top hat we made for the Sovol SV08 All the files are already in the correct orientation and…
Made this to fit my 1.5 inch tub drain and use less material over some of the other designs I saw. Cura shows 6 grams which is roughly a 50% savings after resizing the other ones down to fit. Much easier to resize to fit your drain as the…
With Parametric Fusion 360 files. So stem could be easily modified to be taller or shorter No supports. Only brim needed for tall part Easy to disassemble Held by friction Stem must be printed in shown upsidedown orientation for it to be…
1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports) No Supports required. Used to couple and reduce 1.5" to 1.25" pipes or tubes. 3 Inches of clamp space on each side of the adapter.
Only hardware needed is 4 1in long #10-32 bolts. For assembly, first put the bevel gears into their slots in the case. next, slide the hex shafts into the bore in the gears, and finally bolt the top plate onto the main casing). Ill post a…
2 wall .08 layer Height 15% infill PLA Has no locking screw but could be added. Also, the 1.25 in extension could be made longer as needed. Threaded fine with the metal scope piece. Using a 2.5mm drill, I drilled into the 1.25 section to…
Backpack strap retention clip to keep loose straps from getting caught on things or just hanging loosely. I modeled this off of some clips from an old backpack, and made the opening slightly wider for easier use. Not sure about what kind…
# 5D Tactical Router Jig Pro 1.25in Vacuum Hose Adapter A hose adapter for the 5D Tactical AR-15 Jig to support 1.25in hoses. ## Description Not affiliated or endorsed by 5D Tactical. A hose adapter for vacuum hoses with a greater than…
Chuck which can be slid onto a shart of a nema17 motor and locked on with an M4 screw.
This is a remix of this model with added ventilation holes for increased airflow. I use it with my HP z440 but it likely could fit similar models like the Z240. https://www.thingiverse.com/thing:4783713 My Tinkercad model:…
This adapter adapts the Ryobi 5 inch One+ Random Orbit Sander (P411) dust collector output to the Ryobi 6 Gallon Wet/Dry One+ Vacuum (P770ID). It may very well work for other sanders and/or shop vacs but these are the ones I own and…
Print face down with build plate supports
![DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description](https://media.printables.com/media/prints/629834/images/4989945_188c260e-8dd5-41da-a0ac-36ffe29a7357_91bded45-4751-4250-9ef1-fa21992d5f44/photo_2023-10-28_23-53-27.jpg)
![1-1/2" to 1-1/14" [1.5IN to 1.25IN] Pipe Reducer/Coupler/Adapter (No Supports)](https://media.printables.com/media/prints/467707/images/3833779_84360414-c412-4bb7-8416-d7704ab80c4f/f360.png)
![Backpack Strap Clip (.75in [20mm] width)](https://media.printables.com/media/prints/242169/images/2185994_463f3f78-f37a-409d-8521-d59e914ec359/a55e687c64cbace6570eab20b45f70d3_display_large_24.jpg)
