232 models
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. The box holds 6U high bins…
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. And for all Voron lovers out…
This is a bobbin holder inspired by @Tdub5PrintNPl_470602 stackable bobbin holder (https://www.printables.com/model/367842-stackable-bobbin-holder) but built from scratch for gridfinity. It takes up 3x5x4 and fits 60 bobbins
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.
A simpler take on Gridfinity storage. This tote holds 5x4x12u of space with a bridged handle. They have stacking lips so they can snugly sit on top of each other for storage. I provided alternate designs (hex and solid) as stl files as…
Press to fit End Cap Fit Bosch-Rexroth extrusion 45x45 profile I print them solid, they fit sung
Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.
Gridfinity 5x4 Pen Holder, a sleek and efficient solution for organizing and displaying your collection of 18 pens. Contains magnet holes and can be stacked.
I didnt find a good model of these inserts that I can use for reference when modeling, so I made my own. Since I am a VFX artist, I also included a .blend file with procedual shaders, in case you need it for photorealistic renderings.…
Collection of set screws (ISO 4028 / DIN 916) including : M5x 4, 5 6, 8, 10, 12, 16, 20, 22, 25, 30, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny,…
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
I designed this part, to fit some of my university's projects, where we made work tables out of 45x45 profiles from Minitec. The floor side is meant to spread the area of contact, creating a little bit of a stable base. These can also be…
A 90mm length of 45mm x 45mm aluminium extrusion
Test d'un roulement imprimable diamètre intérieur 10 mm diamètre extérieur 15 mm hauteur 4 mm
Gridfinity holder for network crimper plier, made for a crimper with 19cm length, 6cm width at handle. 2x5x4 no magnets.
Fits Citadel Paint pots with a slight snap. Customized version of https://www.thingiverse.com/thing:2426089 Print Settings Printer: Qidi Tech X-Max (no longer own, I now have upgraded to a Mk3S+) Rafts: No Supports: No Resolution: 0.2 mm…
This is a set of rails / a cage for a BTech (BaoFeng Tech) UV-25x4 radio. It will probably fit the QYT KT-7900D, Radioditty QB25 Pro, and other clones. Both sides are pretty much identical, so just print two and use the black mounting…
Keychain Zodiac Tags
I updated this model to fit m3 screws and thermal inserts. Don't have the inserts in yet so i'm not 100% sure it fits. Inside dimension is 4,2mm
Krytka na Al. profil Maytec 45x45
Hi there. As far as there are many trays on market, I have decided to build my one to have for all my 25x25mm bases exactly fitting one. My tray has 108 x 133 x 6,2 mm. There is hole for magnets on both sides 5x1mm In package you can find…
Remix of @HellfireHD_125784's model. Based off the Gridfinity design by Zach Freedman, this stackable tray was designed to hold 18 8mm x 180mm pencils. Part size: 210x167.5 It uses 6x2mm magnets as per Gridfinity design. I recommend…
Remake of the original using Fusion 360. f3d file included. Mount a Bosch Rextroth 45x45 aluminum profile to a table. Layer hight: 0.2 Infill: 20%
25mm x 40mm Schnalle. Von Grund auf neu konstruiert. Das Gegenstück habe ich noch nicht benötigt.
Für 3l, 5l & 10l Kanister Gewinde 45x4 (DIN 45) Ausgießer mit Belüftung, kurze und lange Version. Trichter mit Schraubverschluss Gedruckt in Petg For 3L, 5L, and 10L canisters with 45x4 thread (DIN 45) Pourer with ventilation, short and…
Hey everyone, I needed an end cap for my 45x45 aluminum profile. The four inner flaps create a nice friction fit so they don't simply slide off. Check the profile in the second picture to verify your profile looks similar. Let me know if…
Shelf bracket in size 30x30x30 Print on the side for better stability. --------------- Regalhalterung in der Größe30x30x30 Auf der Seite drucken für bessere Stabilität. Hit Like, rate and comment! I appreciate your support!
Minitec Profil 45x45 Endkappe
Customized version of https://www.thingiverse.com/thing:2015939 . This was designed to work as a reducer for the inlet of Oneida's 5" Super Dust Deputy. I designed this to fit internally to the opening to avoid having an internal step…
A thing to hold the Hoto Cordless Air Duster & Vacuum (a.k.a. Compressed Air Capsule). Bin size is 5x5x4.
Can be printed as-is without supports even on small printers. Tested for: Mazda Miata NA/NB If you print this thing, please upload a make and comment if it fits your vehicle.
Round Corner Templates (5x45°- 60x45°) to help you mark the corners. Just hook the template over the corner and mark it with a pencil.
Hier eine Felge, die ich für den Tamiya Mad Fighter entworfen habe, da die originalen Vorderreifen sehr schmal sind. Die Felge ist 30mm breit und hat einen Durchmesser von 60mm. Sie passt zu den Reifen, die ebenfalls in meinem Profil zu…
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Organiser Box printet in PLA 0,2mm Speedprofile. No supports
In the STL file, both models are included, one oriented vertically and the other horizontally. I printed it in PLA with a 0.2 layer height and a 15% infill. Ideally, it should be printed with PETG or flexible filament to provide some…
Simple shallow box wth many uses. Me used it in kitched for some spices and utensils. Could be scalled. Print instructions Printer brand : Creality Printer model : Ender 3 v2 Rafts : NO Supports : NO Resolution : 0.2 Infill : 15 Filament…
5 x 4 pieces jigsaw puzzle with dimensions of 130 mm x 90 mm ( = standard foto size). Size fits a standard printed Foto to glue on top of the assembled puzzle, to cut at seams and to create a custom foto jigsaw puzzle. Unless msot other…
EBB36/NH36 mount with strain relief
Mount for your thurstmaster warthog joystick on you 45x45 simrig. For the vertical version, the axes must have been threaded as shown on the picture. Then you put the mount with srews. I added a cover so the joystick's electronic won't be…
60mm fan mount for Voron Switchwire with M3x5x4 Heatset inserts
I was on the Gridfinity train, planning out my first drawer, and I had ALMOST enough room for one more section, but not quite. So, I made a filler version that is, of course, 7mm smaller in width than the original size. That way, I don't…
A 90mm length of 45mm x 45mm aluminium extrusion
Filament: - JAYO - white - PLA+ Drucker: Prusa MK3S+ Düse: 0,4 Schichthöhe: 0,2 Infill: 40% Stützen: keine Druckzeit: siehe gcode
I designed this Turtle Basking Area piece that fits on an Ender 3 bed (235x235mm). You have to print two copies. After that it hold on to the glass very tight so you don't need to glue the parts. The upper part is cut for 3mm acrylic…
Updated to use the Vorn spec 3/5/4 heatserts. 2.9mm plastic below to allow nyloc like anti vibration movement. Does have the 3d printed stepping for screw overhang as well. Added second model with holes to push the magnets, should you…
Petite équerre à avoir sous la main pour créer des étagères supportant des accessoires.
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Halterung Handzähler (holder mechanical counter manual 45x40 carrier)
clean and fast design to cover the rails of your cockpit
When assembling a large quantity of LACK tables from IKEA, screwing in the feet will become really hard on your hand. Therefore you can use this handy wrech to help you install the feet. This wrench has an inner diameter of 51x51mm which…
EN: Custom sorting boxes fot workshop tools trolleys 3 sizes: 75x75x45mm 150x75x45mm 150x150x45mm The height is actually 43mm to fit felt drawer insert. Practical plastic sorting box for storing small parts such as nuts, screws, dowels,…
I made this press tool for 6700 bearing, this really helpful for RC cars, it allows you to push straith in or on the bearings.
This is an adapter plate for F450 or Q450 quadcopter frame (DJI/similar clone frames). Some 450mm frames have 4 screw holes on the top plate. If you wish to use a Betaflight based FC (or any other FC with 30.5 x 30.5 mm mounting holes)…
This is the 45x45 mm version of the Cable Duct for 4545 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models different sized versions.
cockpit mouse support
The thread M6 is one the tighter side, tools are necessary for standard M6 screw. Please note, that your printers accuracy/tolerances may differ from mine, scaling may necessary. If you're interested in other thread-sizes or models for…
Mount a Bosch rextroth 4545 alu profile to like a table. Layer hight: 0.2 Infill: 20%
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
This can be used if you need to have a foldable 45x45 leg. Instructions Print and mount. Ps: I ran out of black PLA when printing the holder. That's why the holder is in dual color... :) Category: Other
5x1 through 5x6 base grids. The most important thing is to make sure your magnets have the same orientation throughout the whole system. More about the FreeGrid system and FreeCAD tools to build your own modules is available on our…
Hier habe ich einen Abschlussdeckel für ein Kabelkanal 25x40 erstellt.
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
Sandpaper holder 75x457mm for drilling machine Required material: Sandpaper strip 75x457mm Screw M12x12 (1pc) Self locking nut M12 (1pc)
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
An extension of this thing ( https://www.prusaprinters.org/prints/73985-thurstmaster-warthog-joystick-mount-for-45x45-90x4 ) but now for the trottle. Works fine for me... Enjoy :) Print Settings Printer Brand: Creality Printer: CR-10…
A fun maze! Size is 45 x 45. Use a 3mm steel ball. You can find the solution in the pictures. Fun toy or puzzle for everyone! This is smaller than my 35x35 Maze and a bit more complicated.
Two pieces. Without screw. Compatible with all keyboards
These are Lego-compatible doors, optionally decorated with a pirate skull. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three…
I couldn't be bothered to get a proper window insert material, so I thought: Why not print it? Obvious. And to avoid the milkiness that comes with more layers, I reduced the actual see-through parts of the window to a single layer. The…
These are Lego-compatible doors. One left and one right door can be used together as a 5x8 gate. The doors can be swivelled inwards and outwards. Print the doors in STL orientation with three outer layers, 15-25% infill and support. — I…
This is a caster adapter for 45x45 Bosch Rexroth aluminum t-slot extrusions. The fit is tight and I had to use a rubber mallet to hammer it on. Caster attachment holes are 27.5 mm apart. To adjust them, adjust casterPlate_w to the…
Deckt das Aluminiumprofil von Bosch ab. D10.3 innenfedernase
First of all thanks to Matt The Printing Nerd for the component cooler template from the fastest printed 3D printer in the world - THE 100. I attached the Creality "High Flow Kit" to the cold end, but not with the enclosed 4.1 mm heat…
voron 0.2 MiniSB_Motor_Plate with M3 Brass heatstake inserts - short M3x5x4
This endcap for 25x40x1.5 mm square tube has a 12 mm hole for mounting a adjustable foot. Note The hole has a diameter of 12 mm. To hold the force of the foot, an adequate nut (M12) and a washer must be mounted under the end cap. Print…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Filament Spoop Holder for up to 2,2 KG Spools Bolts are Used M8 Alluminum Tube was used: 20mm outer Diameter 8.5mm inner Diameter 200mm long Spools 3D Shown From: https://grabcad.com/library/filament-spool-stand-by-pax-1…
Adapter allows Solar System Lithophane collection using m75x4 threads to be mounted to 4 inch ceiling light fixtures using e26/e27 LED bulbs. Both parts can be printed without support. The adapter allows for rotation of Solar System…
I needed a simple way to assess the flatness of my bed. This model helps evaluate the first layer's Z height and the position of a part on the bed. I've learned that some areas of my bed are less reliable then others for first layer…
Had some different sized magnets and created the correct bottom parts using the provided bottom-filled.stl file. extra magnet sizes: - 20x3mm - 15x4mm (2x 15x1.5mm stacked)
Functional T-Nut M4 Metal (Square Nut) print them solid, with supports
Die untere Schicht kann mit TPU gedruckt werden, dann hält die Platte besser an der Kamera. Ich hatte die originale Platte verloren, eine Ersatzplatte bestellt, die nicht gepasst hat. Also habe ich die Metallteile der falschen Platte…
Ran across these UK containers and thought it would be neat to convert one to a particular US lid. These unusually shaped Food City store, That's Smart labeled milk jug lids are larger than normal milk jugs and that makes for a little…
petg, 30%infil, 0.20
Hey everyone, I needed a corner cap for my 45x45 alu profile corner. The two flaps create a nice friction fit so they dont simply slide off. Print a 45° angle for best surface finish and strength. Let me know if you need a different design.
Customized version of http://www.thingiverse.com/thing:1198825 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1198825 Print Settings Resolution: 0.3 Infill: 50% Notes: Printed in PLA. Category: Decor
internal dimension 45x45 external dimension 100x100 height 85 mounting diameter 6 mounting diameter to substrate 10
A remix of the modular drawer set by @AdvancedHobbyLab. I chopped this just about in half – actually it's slightly taller than truly mathematically in half – to produce a shorter drawer. Available in the 5x4 configuration only so far,…
I got fed up with my old X52 and decided to spring for a set of VPC sticks, but couldn't find any good mounting solutions for them. This mount is designed for a 45x45 aluminium slot profile and will pretty much not allow any unintended…
Tired of my drawer being a mess so I printed this storage solution for my drill and batteries. Realized I had some more open spaces so I made room for some drill bits and bit holders. It is 5x5 with 4u height for the gridfinity system.…
Formrohr Stopfen 25x25 für die Alubordwand von Pongratz Anhängern, Passt natürlich auch in andere 25x25mm Formrohre 25x25mm square tube plug for the aluminum side panels of Pongratz trailers. Also fits other 25x25mm square tubes. Stoppel…
pla or petg, 20%infil 0.20
