P
PrintablesBogas
Token Box / Token Holder 75x75
A simple token holder, great for board games. You can storage multiple boxes on each other.
- Downloads
- 1,144
- Likes
- 158
- Rating
- 5
Search results: 5x7
197 models
P
Printableskwark
Perfboard electronics case 5x7cm
Printed the top part without bottom or top layers to create holes for heat dissipation. Warning! Uses heat inserts to screw top in. Parts needed: 4x m3 screws 4x m3 heat inserts
- Downloads
- 161
- Likes
- 22
- Rating
- 0
P
Printablesgskollnau
Bonsai display table (08) round 75x75x59mm
Bonsai display table (No. 08) round 75x75x59mm, best for mame bonsai. Feel free to scale up or down until you like the result and it suits your tree. A little support is necessary, even if the pot and feet are printed separately. However,…
- Downloads
- 68
- Likes
- 13
- Rating
- 0
P
Printablesbennie
VESA 75x75 or 100x100 low profile wall mount
Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…
- Downloads
- 994
- Likes
- 102
- Rating
- 5
P
PrintablesSlackerSean
Picture Frame - 5x7
This is a 5x7 picture frame with picture support and a brace to hold everything together. Created a slide in stand that attaches to the holes in the picture brace. The picture is placed in the frame, then the back plate, then the brace to…
- Downloads
- 844
- Likes
- 85
- Rating
- 5
P
Printablesrorys3D
Tiltable VESA mount - 75x75
A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office or perhaps for public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…
- Downloads
- 546
- Likes
- 130
- Rating
- 5
P
PrintablesUnicorn3D
Wider and longer underdesk drawer (15x29.5x7.3cm)
The original underdesk drawers from Godard Scientific are awesome. One thing however which I needed to change was that the drawes were a bit small - and I wanted to make use of my Prusa XL to get some bigger drawers. So this single drawer…
- Downloads
- 538
- Likes
- 252
- Rating
- 0
P
PrintablesKen226
Small Metric Woodworking Square 100x75x75mm
A small, metric woodworking square. Print in whatever material you like, using any infill amount you like.
- Downloads
- 496
- Likes
- 71
- Rating
- 5
P
PrintablesMKLand
Magnet Photo Frame (3.5x5, 4x6, 2.5x3.5, 5x7)
I am so excited about this! I was so tired of my messy fridge and the random magnets to hold up the little photos I wanted on the fridge, so I came up with this simple design. Holds 4 - 6mm magnets. If you have different magnets you want…
- Downloads
- 414
- Likes
- 46
- Rating
- 5
P
PrintablesDMUX
Case for 5x7cm PCB
Simple case for cheap 5x7cm universal PCB. Snap-fit No support needed Two variants of the case (height 8 or 10 mm) Cover for the 10 mm variant 0.2mm layer / 0.4mm nozzle / 20% infill if you like this, buy me a beer ;)…
- Downloads
- 288
- Likes
- 15
- Rating
- 5
P
PrintablesGyörgy Balássy
Vesa mount plate 75x75mm fixed
You can use this plate to mount your monitor to a wall if the monitor supports the 75mm Vesa standard. How to use this: Print this model. Use the model to mark the mounting holes on the wall. Drill the mounting holes on the wall. Add…
- Downloads
- 273
- Likes
- 19
- Rating
- 4.5
P
PrintablesChad Baker
Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)
This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…
- Downloads
- 256
- Likes
- 32
- Rating
- 5
P
PrintablesWertyo
Picture Frame 5x7 Inches
Needed a frame and was surprised to see there weren't more simple options to choose from. I whipped this up in tinkercad and after a few iterations settled on this. Designed to fit 5x7 inches, with a bit of room on all sides because I…
- Downloads
- 244
- Likes
- 25
- Rating
- 0
P
PrintablesBT Entertainment Design & Services
Portable Monitor Base 75x75 VESA no support
Stand or base of any monitor that supports 75mm spacing portable monitors, have included legs only so that it is more portable if you are looking for a stand that will increase the height of the monitor and also provide a better support…
- Downloads
- 224
- Likes
- 27
- Rating
- 0
P
Printablesuser01
Samsung Curved Monitor C24FG70 Vesa Mount 75x75mm
Vesa Adapter for the Samsung C24FG70 I used the m4 screws from the stand to mount the plate on. I used M4 10mm screws, but had a hard time catching the nut for the bottom so I used 25mm with a spacer for the bottom part. I included the…
- Downloads
- 219
- Likes
- 9
- Rating
- 5
P
PrintablesDicyroll Industries
HP 27es vesa adapter 75x75
Since the HP 27es doesn't have a vesa mount I made this adapter for it. It's compatible with 75x75 mounts with M4x12 screws (because they came with the arm I bought), if you need different screw holes let me know. Print Settings Material:…
- Downloads
- 204
- Likes
- 9
- Rating
- 5
P
Printablesjmar
Photo mat 5x7 to 4x6
I had a 5x7 photo frame I wanted to use, but only had 4x6 photos, so I made this simple model. I didn't see other models like this, so I figured this was worth sharing as inspiration. Someone more artistic than I could add different…
- Downloads
- 202
- Likes
- 2
- Rating
- 0
P
PrintablesЕгор Тарановский
Vesa 75x75 adapter for Samsung Smart Monitor M8
Vesa Adapter for Smart Monitor M8 BOM: - m4x10 mm 6 pcs - m5x35 mm 2 pcs - nut m4 6 pcs - nut m5 2pcs infil 20%
- Downloads
- 201
- Likes
- 7
- Rating
- 5
P
PrintablesDylan Kirby
DD audio 5x7 grill assembly for Apache 1800 case
Designed for the Apache 1800 case, for one DD audio RL-X5x7 driver. .step files are included if you wish to mod them for different drivers. The outer trim requires 8 m4 heat set inserts, and is mounted with 8 m4x8mm screws. The jig has…
- Downloads
- 199
- Likes
- 33
- Rating
- 0
P
Printablesjoobie
VESA 75x75 to 18x18 M4 adapter for Multifunction Arm mounting system (SMALL)
VESA 75x75 adapter for the small arm system from RostaP's Multifunction Arm mounting system. The adapter can be screwed onto any 18x18 M4 holder piece using 4 M4x12 screws, then attached to a VESA 75x75 device (also using M4 screws). I…
- Downloads
- 197
- Likes
- 121
- Rating
- 0
P
PrintablesChrisIsTheStig
200x150 to 100x100, 75x75 VESA TV Mount Adapter
This is an adapter to mount a TV with a 200mmx150mm VESA hole pattern to a mount with 100mmx100mm or 75mmx75mm pattern. I bought a small 32" TV for my office, and also got a cheap wall mount that said it supported 32" TVs, however the…
- Downloads
- 196
- Likes
- 24
- Rating
- 0
P
PrintablesVSP
Vesa 75x75 wall mount
This is just an other, probably unnecessary beefy vesa mount for computer monitors, small TV sets. I have recently bought a small 22" monitor to our tiny home office. To save some desk space and to elevate the screen, I wanted to mount it…
- Downloads
- 191
- Likes
- 29
- Rating
- 0
P
PrintablesMerrist
Simply photo frame / stand 5x7 13x18 127x178 L/P
Simply photo frame / stand 5x7 13x18 127x178 Easy to print, can be used on landscape or prtrait orientation Printed with 0.6 nozzle, 0.4 layer and PLA
- Downloads
- 186
- Likes
- 15
- Rating
- 5
P
PrintablesStorM83
Stealthburner SB2040 with 25x7mm Fan and Fanguard
Just a remix from Locki's Stealthburner SB2040 FLY cover for 25mm fan. I added a Fan grill with Voron logo.
- Downloads
- 180
- Likes
- 21
- Rating
- 5
P
PrintablesVladoPortos
MultiBoard Vesa mount 75x75mm
MultiBoard VESA Mount 75×75mm – 3D printed mount for small monitors or devices. Designed with 4 mm (4.2 mm) through-holes. 7mm inset hole. Uses one heavy-duty snap and one regular snap; arrow indicates mounting direction. User must verify…
- Downloads
- 179
- Likes
- 16
- Rating
- 0
P
Printablesvmalat
IBC Tank Lid DN150 (S165x7) to DN110 / DN75 Adapter
Overview / Features This project features two high-quality 3D-printable adapters designed to connect an IBC tank/container with a standard S165x7 coarse thread (DN150) directly to standard household waste pipes ( DN110 or DN75 ). It is a…
- Downloads
- 169
- Likes
- 46
- Rating
- 0
P
PrintablesAnthony Kinson
VESA Mount 75x75 (HSW)
A small 75x75 VESA attachment for small screens and monitors, with integrated HSW attachment. The monitor shown in the images is a small 10-inch monitor. Other HSW PC Mounting ATX, Micro ATX and Mini ITX Motherboard Mount ATX PSU Mount…
- Downloads
- 167
- Likes
- 57
- Rating
- 3
P
PrintablesWorti
TV or Display Stand VESA MIS D 75x75 for 23 inch Display
One of our kids knocked over the TV and broke the stand on the TV. The stand and the bracket on the TV are broken and can't be repaired either. Good thing that today's TVs have holes and threads for a wall mount. The threads on this TV…
- Downloads
- 160
- Likes
- 5
- Rating
- 0
P
Printablesedward8e
Gridfinity Glue Stick Grid Bin 25x7g
Introducing the ultimate addition to your organization toolkit: the custom-designed Gridfinity 3x3x6 bin, specifically engineered to store 25 of your 7g (0.24oz) Elmer's glue sticks. Meticulously designed for efficiency and aesthetic…
- Downloads
- 152
- Likes
- 12
- Rating
- 0
P
PrintablesSp1y3rS
VESA mount 75x75 100x100 mini PC
A simple bracket to hang a mini pc on a tv stand
- Downloads
- 148
- Likes
- 25
- Rating
- 0
P
Printablesehrlmpe5
Live-Z Adjust 75x75 Calibration Square 0.3 mm high (for 0.8 mm nozzle)
A simple 75 x 75 mm square with a 0.3 mm height. Intended to be used to calibrate for the Prusa 0.8 mm nozzle profile, which has a 0.3 mm first layer height. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
- Downloads
- 138
- Likes
- 2
- Rating
- 0
P
Printablesrin_ofumi
5x7 dot matrix Tag
* This is a design for the contest . I think all users have the same problems. Thank you for the good contest. It is a design to use up the last filament. If you're wondering how to use up the filament, print this tag. <Design conditions>…
- Downloads
- 123
- Likes
- 80
- Rating
- 5
P
PrintablesSpecker
Vesa 75x75 - Raspberry pi mount
Vesa 75x75 - Raspberry pi mount
- Downloads
- 120
- Likes
- 11
- Rating
- 5
P
PrintablesKW
Large format film box 4x5 5x7 (customizable)
Film box primarily for large format photography. It allows you to protect light sensitive film with three nested boxes, like the cardboard boxes large format films typically comes is. You can also use this for photographic paper. All…
- Downloads
- 118
- Likes
- 16
- Rating
- 0
P
PrintablesMatt Finder
5x7 Picture Frame for Prusa MINI
This is printed in two parts as the bed for the MINI is 7 in and there are ½ in margins on all sides. There are options for vertical and horizontal hanging so be sure to pick the correct one! Printed all pieces at once with no supports…
- Downloads
- 114
- Likes
- 12
- Rating
- 5
P
PrintablesSixpack99
Basic Picture Frames for 4x6, 5x7
The trim pieces can be printed in a different color from the backing if you wish, since they are separate pieces. Just use CA glue to join the pieces together and then (when dry) slide the picture into the thin slot on top. If you use the…
- Downloads
- 113
- Likes
- 14
- Rating
- 5
P
PrintablesRoman Hujer
Solar Filter for Binoculars 15x70 or 20x80 and 10x50
Solar Filter for Binoculars 15x70 or 20x80 and 10x50 use with BAADER AstroSolar Safety Film (OD 5.0) Use a tap to create a thread for screw FreeCad source Category: DIY
- Downloads
- 110
- Likes
- 17
- Rating
- 5
P
PrintablesFelix Fischer
![[REMIX] Raspberry Pi 4 Half Case VESA 75x75 mount](https://media.printables.com/media/prints/517762/images/4191144_9d52a3d7-4408-4336-aa1a-2d60ec4ed5c9/screenshot_20230702_004327.png)
[REMIX] Raspberry Pi 4 Half Case VESA 75x75 mount
This case is a remix from gurnarok's Pi 4 DIN rail case . It only includes the lower half of the case in order to improve cooling of the Pi. I also replaced the DIN rail mounts with two VESA 75x75mm mounting holes on one side, so it can…
- Downloads
- 108
- Likes
- 6
- Rating
- 5
P
PrintablesRok Potočnik
VESA 100x100 and 75x75 Low Profile French Cleat Wall Mount
For print use settings and tips from original model description. Other files are also avalible here. https://www.printables.com/en/model/447758-vesa-100x100-low-profile-french-cleat-wall-mount
- Downloads
- 105
- Likes
- 12
- Rating
- 5
P
PrintablesMoxL
pcb mount 5x7cm
PCB mount for 5x7cm. Slight angle for ergonomics. Holes in bottom for cables or venting. 19 gram print including tree supports in print in example. (Sunlu PLA+) Screwholes present in case of hardmount needed. Category: 3D Printing
- Downloads
- 103
- Likes
- 8
- Rating
- 0
P
PrintablesBHuij
Deluxe Flat Bottom Darkroom Tray for 5x7
Alt process printing often involves toning in extremely expensive precious metals like gold, platinum, and palladium. Using a flat bottom tray allows for the absolute minimum amount of liquid to be used for these steps, as trays with…
- Downloads
- 100
- Likes
- 15
- Rating
- 0
P
PrintablesAzimmer328 Gaming
5x7 Lithophane Frame
Basic 5x7 Frame for a lithophane. There are two holes on the backside one for a switch https://www.amazon.com/dp/B0B67GX6CT?ref=ppx_yo2ov_dt_b_fed_asin_title and one for a power cord…
- Downloads
- 98
- Likes
- 10
- Rating
- 0
P
PrintablesChris Crowder
Apache 2800 5x7 speaker adapter
I want to make DIY turtlebox. I used an Apache 2800 case from Harbor Freight and 1002T amp along with a Kobalt 24v battery adapter. I could not find an adapter for a 5x7 so I made one to allow me to not have to trim the ribbing on the…
- Downloads
- 98
- Likes
- 18
- Rating
- 0
P
Printablesvaderdd
5x7 Toploader Stand
I didn't see any models for displaying anything other than one touch or standard toploader stands, so I made my own for 5x7s. I have printed and tested the verical one with UltraPro and BCW 5x7 cases. However I have not had a chance to…
- Downloads
- 98
- Likes
- 7
- Rating
- 0
P
PrintablesYi Yu
5x7 Vertical Lipsticks Holder
vertical lipstick holder, 24x24x85mm each cell, 10 degrees recline Make sure you print it lying down so NO support is needed. Print Settings Rafts: Doesn't Matter Resolution: 0.2mm Infill: 15%+ Category: Organization
- Downloads
- 97
- Likes
- 14
- Rating
- 0
P
PrintablesFlueRian
VESA 75x75 to Camera Tripod or Microphone Stand (1/4" UNC) Scissor Arm
I just built this quick and dirty to make it possible to use my cheap mic arm for a secondary screen. It has some limitations in the horizontal movement and lacks the possibility to swivel though. I added an option to use the balljoint…
- Downloads
- 96
- Likes
- 16
- Rating
- 5
P
Printablestrackster986
Prototype Board Vented Box with Lid 5x7CM
I built a custom circuit using an ATTiny to drive an oil temperature gauge off the factory DME in my Porsche. I needed a vented enclosure for a 5x7CM prototype board and couldn't find any I liked with a snap on cover, so I made my own.…
- Downloads
- 92
- Likes
- 5
- Rating
- 0
P
Printablesmachineica
6054 / 5x7 headlight to 4x6 adapter
I wanted to fit some 4x6 lights i had on hand to my 92 Toyota with 5x7 or 6054 sealed beams. These are adapters with no retention currently because i had planned to epoxy the 4x6 inside them. I will release a version with bolt on…
- Downloads
- 92
- Likes
- 9
- Rating
- 0
P
PrintablesBogdanBogvzyan
Spiral for Paterson Developer Tank 13x18 (5x7")
Spiral for developing sheet film 13x18 cm (5x7 inches). Suitable for Paterson Multi-reel 3 tank. Holds 4 sheets of film. Developer consumption: Standing development – 980ml Rotation development – 500ml Consists of 3 parts that need to be…
- Downloads
- 90
- Likes
- 20
- Rating
- 0
P
PrintablesKirill_Maker
intel nuc 5 vesa 75x75 and vesa 100x100 mount
I've made simple intel nuc 5 vesa 75x75 and vesa 100x100 mount.
- Downloads
- 87
- Likes
- 7
- Rating
- 0
P
Printables512MB
First layer 75x75 0.2Q
First layer calibration, flat. 75x75x0.2
- Downloads
- 86
- Likes
- 1
- Rating
- 0
P
PrintablesChad Baker
3DO Nozzle cam board case + Enclosed 25x25x7mm fan on SB PCB Door
Modified Stealthburner toolhead board cover with 25x25x7mm enclosed fan and a place to mount the PCB for the 3DO Nozzle Camera.
- Downloads
- 86
- Likes
- 8
- Rating
- 0
P
PrintablesMilan D
Organizér pro lepící bločky 75x75mm (Organizer for sticky notes)
Organizér pro lepící bločky o velikosti 75x75mm i se vzorkovníkem. Celková velikost = 93x93x32,5mm Síla stěn i dna = 3mm Moje tiskové nastavení: PETG, výška vrstvy 0.2, výplň 40%, 4 perimetry, bez podpěr
- Downloads
- 84
- Likes
- 19
- Rating
- 0
P
PrintablesAeroSteveO
Earring Picture Frame Holder (5x7)
This is a small slat cutout that can be used in a 5x7 frame (it is 178mm across, so it will fit in any frame with that internal dimension) and glues in place. Simply remove all glass/backings/etc from the frame, mount this in place, and…
- Downloads
- 83
- Likes
- 48
- Rating
- 5
P
PrintablesStandardParts
35x7.5 size DIN Rail with Fusion360 Parameters
======================================================== This model can be printed as is or parameterized through Fusion360. Use of supports under the 'top' and 'bottom' overhangs is recommended. Parameters: Rail_Length Hole_Distance…
- Downloads
- 82
- Likes
- 22
- Rating
- 0
P
PrintablesSusManufactory
75x75 3030 VESA Monitor Mount
Finding a vertical monitor stand for a 21:9 is more difficult than making your own, using 3030 Aluminum Profiles. This adapter uses two M6x12mm screws to attach to a 3030L/B profiles. --- I put in a lot of design, testing and engineering…
- Downloads
- 82
- Likes
- 10
- Rating
- 0
P
PrintablesDarius Curt
Heatbed calibration surface 75x75mm
This is a 75x75x0.2mm calibration surface for the heatbed.
- Downloads
- 80
- Likes
- 3
- Rating
- 0
P
Printablesiamusualguy
macmini m4 vesa 75x75 mount
remixed the model to mount mac mini and monitor on the same arm
- Downloads
- 79
- Likes
- 12
- Rating
- 0
P
PrintablesPedro Ribeiro
VESA 75x75 Compatible "L" Bracket for Raspberry Pi 5 Retro Tower Desktop Case
"L" bracket for Raspberry Pi 5 case - Retro tower desktop with VESA 75x75 holes. It's a 2 part print connect together by the smallest dove tail ever made jk Requires a precise printer resolution to work properly, if required add a dab of…
- Downloads
- 75
- Likes
- 6
- Rating
- 0
P
PrintablesTomáš Stratil
Honeycomb wall vesa 75x75
VESA 75x75 mount for honeycomb wall. You can mount your monitor on honeycomb wall.
- Downloads
- 74
- Likes
- 19
- Rating
- 0
P
PrintablesMoxL
pcb mount 5x7cm NO SCREWS
pcb mount 5x7cm NO SCREWS 9 Gram print (2 walls 0.2 height 20% infill) No screws required, the pins can be melt and pushed down for permanent fixture. No Supports Easy print Made for readily available 50 x 70mm ( 5x7cm ) solder bread…
- Downloads
- 72
- Likes
- 7
- Rating
- 0
P
PrintablesDakota Cope
WinWing FCU Monitor Arm Mounts Vesa 75x75
Made these to mount the FCU to a monitor arm for more options to mount. Works great and is made to fit Vesa 75x75 holes. Has wiggle room for printers and for easy adjustment to help it fit. Works with the 22mm screws that come with the…
- Downloads
- 72
- Likes
- 11
- Rating
- 0
P
PrintablesRandomDesigner123
VESA riser adapter 10mm for 100x100 to 75x75
Hello World! To use my old monitor arm i needed to adapt the vesa100 pattern of my monito to vesa75. I Also needed to lift the assambly by 10mm to get out of the way of the monitor backplate. I printed the model in PETG but PLA will do as…
- Downloads
- 72
- Likes
- 2
- Rating
- 0
P
PrintablesWobbles
Monitor Mount (VESA 75x75) with 12mm copper pipe
It is a mount for little portable monitors, which supports VESA 75x75 mount. If you use a 12mm copper pipe, than you can build a cheep and simple monitor stand.
- Downloads
- 71
- Likes
- 10
- Rating
- 0
P
PrintablesBedLevelBoss
Flashcard__Holder (5X7 inch & 3X5 inch)
Welcome, and thank you for choosing my model. I will provide some context for this model. This practical 3D-printed flashcard holder is ideal for neatly organizing your study cards and presenting them in a clear overview. The design is…
- Downloads
- 68
- Likes
- 39
- Rating
- 0
P
PrintablesRoland Daum
Dell Monitor Adapter VESA 75x75 100x100
Adapter for the adjustable Dell Monitor Stand to mount a 3rd party VESA connectable monitor
- Downloads
- 67
- Likes
- 4
- Rating
- 5
P
PrintablesSpb2005
Vesa adapter: 75x75 -> 100x100 Height adjust
Vesa adapter to change height and from 75x75 to 100x100 mm.
- Downloads
- 67
- Likes
- 4
- Rating
- 5
P
Printablesbostwickenator
VESA 75x75 Camera Mount
Used for mounting a camera on a VESA 75x75 monitor stand. Holes are intentionally undersized for M4 mounting screws, simply screw directly into the plastic. This should work for any camera with a tripod mounting screw less than 50mm away…
- Downloads
- 66
- Likes
- 10
- Rating
- 0
P
PrintablesAqanta Design
Simple Print-in-Place 5x7 Picture Frame
A simple picture frame for 5x7 photos. Prints in one piece without any supports. Useful for keeping photos straight and/or mounting them to a wall with sticky putty. Print face down on a textured pad for best results. Put a picture in the…
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
Printablesedcdadstuff
MSI G274F monitor mount for Amazon Basics Vesa Mount 75x75 to 100x100
A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…
- Downloads
- 65
- Likes
- 2
- Rating
- 0
P
PrintablesIonNight
Beam brackets 5x7, Lego compatible
Imported from my designs on Thingiverse. Original upload was 13.03.2019 (dd.mm.yyyy) 2 brackets for you people. The one without all the holes is almost like the original, but the holes on the side are in opposite location. Added v2 files…
- Downloads
- 65
- Likes
- 9
- Rating
- 0
P
PrintablesDomingo M
Backplate, buttons and Vesa 75x75 para 8.9'' Lcd enclosure and FANATEC CSL DD Vesa 75x75 holder
This modification has been to be able to place a vesa75x75 universal support, in addition to the fact that my buttons did not match the original design. I have also added a support to be able to use it on a Fanatec CSL DD remix base of…
- Downloads
- 62
- Likes
- 7
- Rating
- 0
P
PrintablesOstrichEngineering
![[OECC1] 12.5x7.5mm Cablechain System Print-in-Place with clips](https://media.printables.com/media/prints/1161367/images/8924418_15aed856-fa6d-4aa9-9777-027257f290dc_faf902f5-847f-484c-9a31-ac1d4c58c2cd/348e53a0-6d86-44fb-8df7-7ac849886a53.png)
[OECC1] 12.5x7.5mm Cablechain System Print-in-Place with clips
Cable chain system with 12.5x7.5mm internal cross-section. Cables and chain links can be inserted through a simple clip. Bend-angle on a single hinge: 45° upwards, 30° downwards. 20mm bend radius. Your printer should be able to print…
- Downloads
- 59
- Likes
- 8
- Rating
- 0
P
PrintablesJack Doe
Modular Silicone Mold Box (75x75x110mm)
Overview This is a sturdy, interlocking mold housing designed for silicone casting. With an internal footprint of 75x75mm and a maximum height of 110mm , it provides a reliable and leak-resistant frame for your DIY molding projects. Key…
- Downloads
- 59
- Likes
- 1
- Rating
- 0
P
Printablesmaxelman
LEGO 5x7 inch photo frame - Vertical
Stacks with the landscape/horizontal frame here: https://www.printables.com/model/1228532-lego-5x7-inch-photo-frame-horizontal Works with 1mm plexi on both side of the print, like this: https://www.amazon.com/dp/B0BZSBHBT1 You may want to…
- Downloads
- 58
- Likes
- 10
- Rating
- 5
P
Printablesamaz3D
Monitor Wandhalterung schwenkbar (für 75x75 mm Aufnahme) // Swivelling monitor wall mount (for 75x75 mm mount)
Monitor Wandhalterung schwenkbar (für 75x75 mm Aufnahme) 3-teilige Ausführung Ich werde damit einen 15,4Zoll USB Monitor (1kg) an der Wand befestigen. Druck: PLA Overture Light Grey 0,20 Layerhöhe 0,42 Layerbreite 3 Wände 4 Boden / 4…
- Downloads
- 58
- Likes
- 3
- Rating
- 0
P
Printablesgencitch
Adapter Plate - 75x75x30mm Fugetek radial fan to 3M Filter Bayonet
I wanted an adapter that would fit a 3M VOC filter and mount to a Fugetek 75mm x 75mm x 30mm radial fan (model number HT-07530D12M). I couldn't find anything that did what I wanted, so I made one. I printed this out in PETG with 2…
- Downloads
- 57
- Likes
- 4
- Rating
- 0
P
PrintablesUser87
Plastic sorting box for workshop trolleys (75x75x45; 150x75x45; 150x150x45) Sortierboxen für Werkstattwagen
EN: Custom sorting boxes fot workshop tools trolleys 3 sizes: 75x75x45mm 150x75x45mm 150x150x45mm The height is actually 43mm to fit felt drawer insert. Practical plastic sorting box for storing small parts such as nuts, screws, dowels,…
- Downloads
- 57
- Likes
- 4
- Rating
- 0
P
Printableslainsnavi
5x7 Grimmerie Notebook
This is a custom grimmerie based on the movie using two 5x7 notebooks. Models were designed in Adobe Illustrator and Tinkercad. The outside covers were designed to be printed face down without supports on a holographic pey build plate.…
- Downloads
- 54
- Likes
- 17
- Rating
- 0
P
Printablesrkaiser87
Blue Yeti 75x75 VESA Mount
Designed this Blue Yeti mount so that I can mount it onto one of my unused VESA mount monitor arms. This is designed to attach to a 75x75 VESA mount using four M4 nuts and machine screws (will need to be sourced separately). The M4 nuts…
- Downloads
- 53
- Likes
- 7
- Rating
- 0
P
PrintablesefficientAF
Lipo Bag 1s Battery Storage (185x75x60mm bag)
I wanted a way to keep my batteries organized and protected in this lipo bag I got on Amazon. This will fit a total of 12 Betafpv 550mah BT 2.0 batteries or similar, with some space for the Betfpv tester/charger and some cables.…
- Downloads
- 52
- Likes
- 6
- Rating
- 5
P
PrintablesScott Uphus
Envelope Letter header template 5x7
While making the invitations to my wedding, we needed a way to draw straight lines in pencil on the envelope quickly and accurately. So I made this crude drawing template. We used a pencil to lightly add lines to the envelope, then would…
- Downloads
- 52
- Likes
- 18
- Rating
- 0
P
PrintablesJoseph Perito
Distressed inks 75x75mm Ink pad an cap holder
simple lid and ink pad holder.
- Downloads
- 49
- Likes
- 4
- Rating
- 0
P
PrintablesTed
2040 Mount for 75x75 Vesa Mount
This mount was made for 2040 profile to connect to a 75x75 vesa mount. It has been tested only for one type. YMMV I have tested it on a VERY LIGHTWEIGHT monitor, PLEASE over test your monitor weight before strapping/screwing this to…
- Downloads
- 48
- Likes
- 7
- Rating
- 0
P
PrintablesRicardo Colombo
VESA Wall Mount 100x100 and 75x75
A simple solution for simple men (also works for women and non-binary people). PRINT IN PETG OR STRONGER. I made this because I couldn't find any designs that allowed access to the ports behind my monitor. It has 100mm of clearance from…
- Downloads
- 48
- Likes
- 7
- Rating
- 0
P
PrintablesThomas Bates
Parametric E-EL 5x7 for Darkroom/Photographic Printing
I'm hoping to get into printing my B&W photographs at home, and while I wait for an enlarger and such to come, figured I'd 3D print what I could. I could not find an easel for 5x7. This is in some ways inspired by BHuij's “4x6…
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
PrintablesScott Henderson
Sheet/plate film storage box (4x5 - 5X7 8X10)
I wanted something less cumbersome than a box in a dark bag for changing film, also wanted something more sturdy that I wouldn't worry about sharp metal/glass corners cutting the film bag and letting light in.. Printing is pretty simple -…
- Downloads
- 46
- Likes
- 13
- Rating
- 5
P
PrintablesRoman Hujer
Astronomy red dot finder holder for bigger binoculars 15x70
Astronomy Red dot finder holder for bigger binoculars Celestron SkyMaster 15x70 or similrar types. Other componets: 2x M3 srcew 1x 3/8 Inch Female to 1/4 Inch Male Tripod Thread Reducer Adapter 1x Female 1/4 to Male 3/8 Convert Screw…
- Downloads
- 44
- Likes
- 8
- Rating
- 0
P
PrintablesMensa
Alternative base for 75x75 vesa monitor stand by Choosecool
I really liked the monitor stand by Choosecool. But even my small repurposed laptop screen was too heavy for it, and the base got bent. So I took the chance, and redesigned it to be stronger (now it is supported on the front to prevent…
- Downloads
- 41
- Likes
- 4
- Rating
- 0
P
PrintablesFutureLab
VESA 200x100 to 75x75 mount for mini PC
Simpel adapter to attach a device with a VESA 75x75 mount behind a monitor with a 200x100 mount. Designt for M4 countersink screws on the 75x75 side. The design fits to a 210mm printbed.
- Downloads
- 41
- Likes
- 5
- Rating
- 0
P
Printablesmaxelman
LEGO 5x7 inch photo frame - Horizontal
Stacks with the landscape/horizontal frame here: https://www.printables.com/model/1228639-lego-5x7-inch-photo-frame-vertical Works with 1mm plexi on both side of the print, like this: https://www.amazon.com/dp/B0BZSBHBT1 You may want to…
- Downloads
- 40
- Likes
- 8
- Rating
- 0
P
PrintablesKuzuCevirme
ArUco Tracker Plate for 75x75 Pattern
My Velcro is Aprx: 15mmx1.5mm Suggesting to print that with pla because its stiffness Square size is 80x80mm. Print the pattern at 75mm so you are going to have white edges. To get ArUco Pattern : https://chev.me/arucogen/ Select >…
- Downloads
- 40
- Likes
- 0
- Rating
- 0
P
PrintablesMattas
Asus MX299Q VESA 75x75 mount
Needed to place my Asus monitor in a vertical position and because it does not have a VESA mount I created one that fits on the leg of the monitor. Tight fit and needs some force to push it in place. I printed this in PLA, 0.2mm layer…
- Downloads
- 39
- Likes
- 1
- Rating
- 0
P
PrintablesFrozengeek1
5x7 Wall Picture Frame
Simple Design and easy to print picture frame.
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
Printableseatstoomuchjam
5x7 Ground Glass Protector
This is a really basic ground glass protector for use with 5x7 cameras. I've been using it with my Tachihara Hope 5x7 for some time now and it's working perfectly.
- Downloads
- 38
- Likes
- 5
- Rating
- 5
P
Printableskrab
Monitor stand VESA 75x75 - Adjustable
BOM for normal printer: 1pc waste pipe 50mm diameter and lenght is up to you 2pcs M8x50 with cylinder head 1pc M8x130 with cylinder head 3pcs M8 hex nut 4pcs M4x16 screws 1pc M8 washer (optional) BOM for XL printer: 1pc waste pipe 50mm…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesAlmostAussie
Abstract Vasemode Vase 85x75mm
In it's current state, this vase is designed to fit pots with a diameter of 85mm and a height of 75mm. Should be printed in vase-mode for best aesthetics. I generally print at least 3 bottom layers with a nozzle diameter of at least…
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
PrintablesScooter239
Hidden VESA Mount 75x75
Uses 4 cap head screws installed in the VESA mounting holes to slide into the mount.
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
Printableserdinckutuk
Little Circuit Box (35x70x19 mm - No support needed)
A simple circuit board box with m3 screw holes, measuring 35x70x19 mm. No support needed while printing.
- Downloads
- 34
- Likes
- 1
- Rating
- 0