Counting matching models…
German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…
Standard Drill bit set wall mount .0625 to .5 inches
If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my other models. Description: I like the idea of Jerryie's…
Disclaimer: this one is stupidly hard to print, don't expect it to work. But when it does it spins surprisingly well Settings: bambu x1c 0.08mm layer height outer wall speed: 40mm/s inner wall speed: 100ms/s The common problem is rollers…
The winged cone for blowgun darts is made for blowguns in caliber .625 (like the big bore from Cold Steel). The wings should force the dart in a little rotation in order to stabilize the flight and increase accuracy. You may need a bit…
Stop chips from getting in your T-slots with the Snap in T-Slot cover
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
These dart cups for the 0,625" Cold Steel Big Bore blow gun are designed for 3mm steel wire. Purchasing 3mm wire and cutting them by hand is much cheaper compared to the darts made by Cold Steel. The original darts have a diameter of…
This model is compatible with the lego system.
This model is compatible with the lego system.
Uses m4 screws and nuts for attaching the controller holder together For the holders: Most settings are fine, and most materials are fine, I printed it with basic PLA You will need supports for the screw holes since they are at a slight…
This is a 10" Rack mount for a Lenovo Thinkcentre M625q Tiny with the measurements 180x183x35mm. Should fit other PCs from Lenove as well. I used print on supports. I set the brush type to trianlge an painted on the overhangs as seen in…
An adapter that allows you to connect items that take a ¼" screw head and use it with a 5/8" screw head commonly found on microphone stands. Useful for attaching things like camera mounts or phone grips to mic stands for overhead or still…
Use heat to insert the skewer and hold it in place.
This is remix of KB Knife sharpener from fsanders. Thanks fsanders for sharing CAD files. It is basically changing 606 bearing to 625 bearing, which is 1mm thinner and 1mm narrower. To compensate this, moter plate and brace arm has bump.…
Cold Steel .625 Big Bore Blowgun Grip with 5 Slot Picatinny Rail Materials Needed: 2 - M3 SHCS 2 - M3 Nuts Optional: Picatinny Mountable Laser for increased accuracy! Print Recommendations: Print with something strong if possible,…
This model is compatible with the lego system.
PR44(675) to PX625 Battery Adapter Suitable for adapting PR44 (675) batteries into electronic devices that use the PX625, such as inside old film cameras.
!!! WARNING !!! I printed it with a 0.8mm nozzle. With spiral mode setting with sequential printing. In this way, excellent quality and strength can be achieved without a seam. I can print 9 pieces sequentially on the mat. If you do not…
PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household vacuum hoses. I harvested an old Eureka hose (the black one pictured), an ancient…
This is a model to be able to hold my Logitech Z625 speakers on a vesa monitor arm.
UPDATE JULY 31.2019: After twice breaking the PLA printed tool holder clamp, I have switched to a clamp printed with PETG filament and a high infill. YMMV. This Angle Grinder Chop Saw for Harbor Freight Item 60625 is a remix of the Angle…
This adapter is for vintage film cameras of a certain era, usually mechanical cameras with light meters designed to be powered by PX625 Mercury battery cells. Cameras tested: Leitz-Minolta CL (Leica CL) Yashica-Mat 124G This is designed…
This model is compatible with the lego system.
Stun darts for the Cold Steel 0.625 cal Tim Wells Signature Series Stock Master blowgun. If you print them in TPU with 100% infill, they're basically indestructible and almost as powerful as solid plastic darts. Both will easily go…
Mit der Desktophalterung das Ladegerät (2A oder 4 A -Version beachten!!!) und der Akku auf kleinstem Raum gestellt werden. Überschüssiges Kabel kann im Body verstaut werden. Der Ladezustand des Akkus ist jederzeit ersichtlich.
This is holster claw specifically made for a DIY Holsters shell and a PF940C. With .625" spacing, its likely to fit many more holsters. I've included the STEP so you can make modifications as need be. Test, try, and train with any carry…
I mount my filament holder on the side of my CR-10 MIni, behind the right-hand side vertical extrusion. I also have a direct drive extruder, so I needed a way to guide the filament from the side, over the top of the frame, into the hot…
I made a rear light holder for the CUBE Reaction Hybrid SL 625
A simple bearing dummy for help on your creation needs. Category: 3D Printer Accessories
A little wing-addon for the darts of a blowgun, caliber .625 (e.g. Big Bore made from Cold Steel) In theory the little wings force the dart in a rotation which stabilize the flight. TPU is recommend because of flexibility and adhesion on…
Description So, we have a farm where people just seem to drop their unwanted cats. My wife and kid’s big hearts will not allow us to turn any of them away, so we have a bunch we feed and care for at this point. Every day we leave out food…
The winged cone for blowgun darts is made for blowguns in caliber .625 (like the big bore from Cold Steel). The wings should force the dart in a little rotation in order to stabilize the flight and increase accuracy. You may need a bit…
Blowgun darts for E Darts in cal. 0.40 and 0.625 The darts are with a thread fitting the standard (european) darts tips Use TPU for printing. PLA will break on impact. Best for game mode "Cricket" otherwise its likely that you hit and…
This model is compatible with the lego system.
This modal was designed to be printed without supports. Print standing upright. Dart cone may need to be sanded for more precise fit.
I made this model for blunt headed darts to fit a .625 caliber cold steel blowgun for when you want to shoot something but don't want a hole in it. The dart fits well inside the blowgun, it snaps into the anti-inhalation device with a…
Lost my quiver guard for my big bore .625 blowgun, so I made a replacement that entirely covers the "razor blade" type dart. Printed in Petg, mine was quite snug. If fitment isn't sufficient, I recommend adjusting the size when slicing…
3D scan and solid model of a Borg Warner EFR B1 frame turbocharger (specifically a EFR6258, but similar to any B1 frame turbo) This one has the twin scroll 0.8AR IWG turbing housing and the standard compressor cover. If I purchase the 90°…
Made for the Cold Steel Tim Wells Signature Series blowgun but should work with any 0.625 cal tube. Similar to the Cold Steel Big Bore .625 Magnum Stun Dart B625SA:…
I bought incomplete LEGO 7131 Star Wars Anakin's Podracer - the only thing missing was Black Hose Rigid 3mm D. 19L 15.2cm 75c19 / 47043 / 76257 🔗 so quick Fusion360 project and it's done! Print tip! PLA is fine print 0,15mm in lower speed…
for use your 625 (16x5x5) bearing in project that use 608 (22x8x7)bearing !! Print 2x inner spacer !! Use 5mm axle(screw) instead of 8mm one
The base module (not modified) you'll find in the original project: https://www.printables.com/pl/model/59013-filament-spool-holder-2021
The Rubbermaid 21 cup container makes a convenient dry box for humidity-sensitive filaments. My design needs a single hole in the container for the bowden tube passthrough, and uses rubber washers to preserve the airtight seal. There is…
T Slot covers for 5/8" tables for ease of cleaning. Tested with HAAS and Acer Mill tables. Designed for use with 95A TPU. No Supports required. CAD Models attached. I used NinjaTek Cheetah 95A using the supplied profile from Prusa. These…
used for pullstruder for controlling speed of the stepper based on diameter, it's pretty accurate down to like ~0.05mm, uses 4x 625 bearings, and LINEAR SS495A hall effect sensor.
Replacement cap for the brake/clutch system on the 4G Mitsubishi Eclipse 06-12. Mitsubishi OEM Part number is 4625A161. Apparently this will fit the Galant of the same generation. May also fit other brands/models so it may work for you…
Universal Y-Carrier with V-Slot-Wheels (625zz) for GT2 and 8mm Linear Shaft
I honestly don't know where else I would end up using any 10x15x4mm ball bearings that the original heat set press model calls for, so I snagged one of the two bearings from these rollers that I had ordered for the project (easily popped…
UPDATE: based on the comments I have adjusted parts dimensions to have the proper components fitting. Let me give credits for inspiration to Necko who designed holders and wheels for 608Z bearings:…
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
Harvest 625 bearings from Ender 3 style POM V-wheels Refer Pictures for Assembly instructions. Hardware Required: 1x M8 SHCS Bolt (30mm or longer) 1x M8 Nut A vice (Optional) Recommended Print Settings: Rafts: No Supports: Yes Walls: 5 or…
Decided i didn't like the injection molded sleeves on the idlers for the TronXY X5SA so I made the printable version to include the ridge that is in the center that keeps the sleeve from sliding up or down the bearings during use. Nice…
simple hook for the bosch powertube 625 print at least 3 laying on its side with 4 perimets or more
Dieser einfach Adapter dient dazu, die Hörgeräte Batterie 675 in alten Kameras stabil und sicher einzusetzen. Getestet habe ich den Adapter in mehreren Olympus und Canon Kameras, die Ursprünglich für Quecksilberbatterien gedacht waren.…
Here is my take on a printable yo-yo. I wanted a butterfly style yo-yo with a bearing to allow for better spin. I designed this mostly for a metal 625 bearing—it will certainly work better that way—but if you don't have one handy, there…
Originally published here: Motorola Moto G4 & G4 plus xt1625 case by tato_713 - Thingiverse This case is valid for the models G4 and G4 Plus: XT1622, XT1624, XT1625, XT1641, XT1642, XT1644; but not the Moto G4 Play models. Some of the…
And here is yet ANOTHER fidget spinner. This time, I've made it use US pennies at the ends, and like the other one, a 625ZZ bearing in the middle. Like the other one, the ends have a "windowed" design, with snap-in retaining rings to hold…
The original part breaks, warps, and sticks. This improved part sticks less and should hold up better. The fillets and struts are designed to reduce turbulence and thus noise. Apparently PETG holds up better than PLA in chlorinated water.…
Bearing supported goodness for your Bar 2.1 Y Axis Category: 3D Printer Parts
Double Shear Addon for the SV08 3D Printed Gantry This is a Double Shear support addon for our original 3D printed XY gantry for the Sovol SV08 . It introduces an upper bearing mount that locks the stepper motor shaft between two points,…
I needed a Hose reducer but couldn't find the correct size, so i made this one. This Reducer is 5" in length I printed this at 100% infill with No Supports
Truck bed molding cap for a 2nd generation Toyota Tundra. I didn't model in the little tabs on the underside because I'm not totally sure what they do. OEM part is PE + PP GF10, I printed in plain ol' PETG on a textured build plate and…
This is a jig to help drill blind joint holes in aluminum extrusions using a handheld power drill. You probably won't be winning any awards for the cleanest drilling, but it should work fine. BOM 8x M3x6 BHCS 4x 625 bearings (you can…
This is a V1 so the tolerances may not be perfect, but this should be close to a friction fit on 0.625in/16mm OD barrels. The length by default is 4.125 inches*, but should be easily adjustable in the slicer by duplicating and stacking…
Printed in PETG. 4 Walls and 20 % infill
Gridfinity organizer for PB Swiss 8625.CBB screwdriver set. 5x2 Gridfinity bin made in Fusion360, using the GridfinityGenerator tool by Lev Mishin. Screwdriver set:…
Funnel and flow hood to convert a PM6252A digital anemometer into a ventilation calibration device. Adapter can be taken apart for storage.
EN: Conversion kit for Lima V80 002 (201625L): NEM coupler adapter and decoder holder fits for ESU Adapterplatine 21MTC (51967) DE: Umbaukit für Lima V80 002 (201625L): NEM Kupplungadapter und Decoderhalter passend für ESU Adapterplatine…
F625ZZ bearing, need longer shaft for A motor
The spinner is designed to be used with 625 ball bearing. Category: Toy & Game Accessories
Wanted a reprap style solution for the lower idler brackets so designed this unit around the 625 bearings that live in your old V wheels. Designed around a 5mm bolt with small bumps inside to clamp onto the inner bearing race. Printed in…
This remix allows a wall mounted charging solution for Bosch 625 vertical PowerTube batteries modified by Kalkhoff.
This motor was scanned in for a robotics project so you could test if it fits without damaging the servomotor.
Simple pottery spinner designed around the bearing found in ender POM wheels. Designed to be push fit 0.2mm player height
I printed recently a tube for 608 bearings, I found on Marker World site. And I was frustrated to don't have similar tubes for the other bearing references I owned. So I completely redesigned several tubes to store my 625 and 606 bearings…
This model is compatible with the lego system.
Holds the following capacities: 15x 608 (3 slots) 14x 6801 (2 slots) 14x 625 (2 slots) 14x 624 (2 slots) 18x 623 (2 slots) Printed with PETG 2 walls, 8% lighting infill
Press fit the bearings into the pulley.
Simple add-on that adds a 625RS bearing on top of the motor shafts to add support. It reduces the bending effect on the shaft caused by the tension of the timing belt. In theory it can make the motor runs smoother under high belt tension…
This remix is for anyone with leftover 625-2RS bearings from a Voron build. I took the stand and rollers from my dry box design and streamlined the base to be used without the container. (Of course, you could use the original without the…
Here is yet another fidget spinner. This one uses six US nickels for the weights, and a 625ZZ bearing in the center. The ends have a "windowed" design, with snap-in retaining rings to hold the coins and bearing. The central cap needs…
Powertube Adapter for Bosch Smart System. 500Wh to 625Wh or 625Wh to 750Wh
A 625 bearing remover for POM V-wheels. You'll want to put it in a vise so model doesn't split apart when trying to remove bearing. Requires a M6 screw (at least 40mm long) and nut.
I drew up these files to run on a laser cutter, to replace a broken, flimsy, plastic insert on a Delta 36250 miter saw. For specifics on how I went about it (with pictures), I wrote them up on this blog:…
I designed this spinner for my 6 year old son since the standard configuration of 4 608ZZ bearings is too big for his hands. The outer bearings are now 625Z bearings with a diameter of 16mm instead of 22mm. To be clear, the center is…
Added 625 bearing to prevent wear. Working great with no wear for almost a year now. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 35% Filament: SUNLU PETG Notes: Print parts on…
After realizing models of bearing tubes to store 606, 608 and 625 bearings https://www.printables.com/model/1316811-bearing-tubes-with-id-ring-for-606-608-and-625-bea I've been asked to create corresponding Gridfinity bins. Here there…
Jig for punching the bearings out of the 625ZZ pillow wheels used in the Recreator 3D Pulltrusion device: The Recreator 3D and the community bottle cutter: The Recreator 3D - Community Bottle Cutter For punching the bearings out, there's…
A remix of the wallmount by Pintie. It appears that Bosch have redesigned the Powertube625, so the button, charge-indicator and the connector have been relocated. So I've made a minor redesign of Pinties wallmount, moving the holes to the…
Replacement latch for Dremel Carving Bit Set 625. Uses the same latch as https://www.thingiverse.com/thing:5165254 and https://www.printables.com/model/187180-irwin-hanson-tap-die-set-sae-drawer-latch . The Flex Latch must be printed in a…
Joseph Lefevre Wetumpka High School Team 0625 Montgomery HUB - South’s BEST I first looked at how a real heart looks and how the heart functions. I also looked at bridge to transplant hearts that are already made and I used them to give…
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" Update: Version 2 is the same except for the bottom which is now easier to print. Print this out for a .625/16mm…
A simple fidget spinner that uses a smaller 625 bearing instead of a 608. Altogether a rather small spinner that's fun to play with, and suits small hands well. Uses 3/8" ball bearings as weights. If you make one, please post pictures.…
La cinghia, specialmente se troppo tirata, può mettere a dura prova il cuscinetto di testa del motore che lavorando con un eccessivo sforzo finendo per consumarsi in maniera anomala creando nel tempo fastidiosi rumori risonanze e…
A 0.625" diameter button in US Standard units. Round face with a filleted edge.
Threaded hose adaptor from a common shop vac hose size 1.625" (1⅝", ~41-42mm) OD to a smaller random size 1.5275" (~1 17/32", ~38.8mm). In my case, I needed to go from a smaller hose for this “Shop Nation” miter saw dust adaptor to a more…
This is a 1:1 replacement for the blue insert which goes inside a 625 coring tool. they tend to wear out over time working with coax so I figured I'd much rather spend pennies in plastic and model it myself than spending $120 getting a…
Ich hatte noch einige 625 Kugellager und habe den Lagersitz auf 16mm angepasst. Da ich das Original nicht anpassen konnte habe ich die Rolle Nachgezeichnet und eine Fase am Lagersitz eingefügt damit sich das Lager leichter Zentriert beim…
