Counting matching models…
IBC tank reducer from 64mm to 1" inch + new 5/4" inch version available redukce na IBC nádrž z 64mm na 1" coul + novinka na výběr i verze 5/4" coul 5/4" version not tested, please give feedback verze 5/4" není otestovaná, prosím o zpětnou…
62mm propellers with a hole for a Lego axle. Print with supports, dry your filament and ensure good cooling. The blobs on the surface are because of wet filament.
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Print the toyota logo a little smaller (I have it set up on the 3mf file it should be 49.94mm on X) Sand them smooth or add resin and paint in silver and black or whatever you like Glue them together Clip it in and enjoy! I will upload…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Slug or diabolos Print in TPU With steel ball as inlet see also suitable pelletboxes for 9mm or 7,62mm
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Two screw top cases for lens filters. For 40.5mm and 62mm filters. Category: Camera
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
Lense Hood for Tamron A005 70-300mm (62 mm). Hood may be mounted in normal position for use, or in reverse position for storage. Has detents which click on the small bumps in the lense's hood mounting tracks. I no longer have an original…
This is a 62mm TPU Tire and Wheel for RC planes. Assembled it is 8 grams. Print the TPU Tire with 0.8mm walls and 0 (zero) infill. The wheel can be printed as you see fit. Sainsmart TPU: http://amzn.to/2HoZmXR The wheel and hub was…
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Intake Funnel with ø62mm inner diameter. Source files included. For Mikuni VM36-4 as sold by Kedo.
Setup Wheel 62mm V3.1 With these 62mm setup wheels you can setup the ride height, camber and front toe on your 1/10 RC touring car very easy and precise. Use a 2x60 mm rubber O-ring in the outer rim to reduce the risk of damage to your…
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
Remix of "Ikea lack support leg support bracker" by Tiko, that I recreated from scratch in Fusion360 to be parametric (editable .f3d project included). My idea was to place the Prusa Original Enclosure on an Ikea Lack table, but it…
I have a P1P with the ARC enclosure, and I wanted a place to fit my twin set of Anycubic Air Purifiers to reduce the VOC levels while printing ABS/ASA, so I designed this raiser to allow fitting the air purifiers on top (for maximum…
Molle containers with internal diameter of 41mm and 62mm. The larger container will accommodate an 11x46cm (18 inch) medical splint. Pojemniki molle ośrednicy wewnętrznej 41mm i 62mm. Większy pojemnik pomieści szynę medyczną 11x46cm (18…
Print in PLA Stackable Sliding lid 7,62mm e.g. for FX Dreamline …
The R1S has a two position for the load floor to allow for the floor to be stepless but this causes the area behind the 3rd row to be ramped at a significant enough level that I would worry about strapping down stuff on that end and…
shock towers to fit 62mm oil filled shocks on a Tamiya TT02; with this and others mods got a good rally ground clearance. printed in pla+
PLA Füllung 20% Schichthöhe 0,3mm mit Stützen, ohne Rand
Here are some 7.62mmx51mm NATO (or 308 Winchester) storage boxes and trays. These are designed to be able to arrange large amounts of bulk 7.62x51mm NATO ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that…
Inspired by clockspring 's Button Jar Lid I wanted to create an easy printable lid for those 62mm lugged jars. If you measure the outer diameter of those jars without the lugs it should actually measure about 58.8mm. I gave the tabs a…
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
.30 Cal (7.62mm) Single Shot Tray for AEA SF It should also fit the HP variant rifles. Print laying down on its back side (the completely flat side) for the best finish on the pellet trough. I printed mine in PLA at 0.2mm layer height…
Abstandshalter für 5mm LEDs. Als LED-Reihe für 5 LEDs. Aussenmass 8 x 38mm, Höhe 5mm. Abstand = 7,62mm (3x 2,54mm) Incl Support. Angepasst für für den Druck auf meinen Anycubic i3 Mega. Material: PLA (hier eco PLA von z.b. 3d-Jake) Noozle…
I needed some sorting trays for my .30 cal pellets. These were made in tinkercad to fit the .30 cal JSB Hades pellets in a head first orientation. They should fit other pellets of the same caliber, but the lid may need to be modified if…
Thread: layer height 0.1mm others 0.2 O-ring printed from white PETG For the AstroSolar filter use Oring with locking screws Glue the solar foil onto the threaded part with super glue. Heat the threaded part to 80°C before gluing so that…
With these 62mm setup wheels you can setup the ride height, camber and front toe on your 1/10 touring car very easy and precise. Use a 2x60 mm rubber O-ring in the outer rim to reduce the risk of damage to your setup board. With an O-Ring…
This helps you to handle 62mm and 72mm lenses cap for DSLR camera Best print in ABS You have to remove the included brim with a knife pen after printing
Hey guys, this is my 55mm lens cap holder for any standard camera strap (10x1,7mm). The advantage of this design is for me the tiny size. Without the cap you wont recognize that there is something on your strap. Ill add some more…
This custom-designed adapter allows you to connect a 200mm diameter ventilation hose to portable air conditioners that use the 137mm × 162mm connector , such as the Hisense APH09QC model (and many others with similar exhaust ports). ✔ Key…
VW GTI Pirelli Design inspired Setup Wheel With these 62mm setup wheels you can setup the ride height, camber and front toe on your 1/10 touring car very easy and precise. Use a 2x60 mm rubber O-ring in the outer rim to reduce the risk of…
I present to you: the filter adapter for Zeiss Ikon SuperIkonta 530/2 bellow cameras. I wanted to fit my cokin A filter system onto my medium format SuperIkonta to make some sweet infrared shots so I designed this adapter. It fits this…
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
This is a support for a hole saws from 25 to 62 mm that fits into the ParkerSide (Lidl | PowerFix) pegboard. You will need supports for the part that fits into the pegboard. can be printed with the biggest side on the bed. The numbers are…
I designed this small modular box to make neat cable transitions from conduit to cable glands. It features 3x M20 knockouts, and 1x M25 knockout. Behind the knockouts is a hex shape designed to capture the cable gland nuts so you can…
An idea of another shape you'd like to see as bokeh filter? Send me a message, I'd be happy to make it. Learn more about those bokeh filter on my wiki: 3D printed Bokeh Filter Bokeh filter for 62mm thread lenses (M62x0.75) 4 shapes: heart…
I used TPU with lowest layer high. (used it for: https://tinyurl.com/exuu5mzf)
My settings: 0.6 nozzle with 0.18 layer height. Support under clip, tree. Seam offset. Piece of filament as connection. Melt the ends with a lighter and press a little against the end. Screw the screw firmly into the plate. Only then…
Update 17.10.23: Distanzring mit 20mm hinzugefügt. Ich habe den Motor von meinem Wolf Cart getauscht und statt eines Motor mit einer original Motorwellenlänge von 62mm einen etwas stärkeren jedoch dann mit 80mm Motorwellenlänge genommen.…
Two sets for both ends of binoculars. With option to tie those to binoculars directly.
Remixed this great DIN mount from Synthead for one of my buck converters. Made to fit these DC Buck converters: https://a.co/d/9As3Hm7 Print on the flat side. Can be printed in any material. I used Overture ABS for mine and it came out…
I wanted to put the filter of my teapot somewhere so it can drip and dry off between brews, so I made this. Fulfills its purpose perfectly. Should you have a filter with a different diameter, it's easy enough to adjust the model. Feel…
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
You can change pattern of grid by changing type of infill in slicer. Vent part is split into two parts: There are also two file for nuts with different tolerances: 0.05mm and 0.1mm. Chose dependent of yours prints quality.
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
Bought this hub from amazon but the mounting part wasn't working This Will make it fit in a 62mm plus you can remove the usb part without needing to remove the ring from the desk
Needed an adapter for my new pool pump TRUTZHOLM® Schwimmbadpumpe Poolpumpe Filterpumpe Pumpe (800W / 15m³l/h) The adapters provided here were just too small, so i opened Fusion360... Print Settings Printer Brand: Prusa Printer: I3 MK3S…
This model is intended for anyone requiring a functional and reliable solution for organizing and holding spray cans, especially in workshop or garage settings. Use PLA or PETG with auto tree support
These compact desk stands are designed to raise your soundbar by 35 mm , for example to clear the feet of a monitor stand or other obstacles on your desk. They fit soundbars with a maximum width of 62 mm and help improve placement without…
print in .12mm height layer for the threading to work best use supports
Format: 69x87x26mm Use: The model was designed to hold WiFi vouchers for my home which I printed on a brother 62mm label printer. It has two trays for different length vouchers. 62mm wide labels fit very well and can be easily removed,…
Buttstock nut for MAS FR.F2 7.62mm rifle, from experience with the rifle i know how easy is to break the thread on the original nut, so i made this one. Changelog:
Clip to mount a 62mm sony lens cover a shoulder strap. Modeled with SolidWorks for makers. Best Regards, syclone
These compact desk stands are designed to raise your soundbar by 35 mm , for example to clear the feet of a monitor stand or other obstacles on your desk. They fit soundbars with a maximum width of 62 mm and help improve placement without…
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
An idea of another shape you'd like to see as bokeh filter? Send me a message, I'd be happy to make it. Learn more about those bokeh filter on my wiki: 3D printed Bokeh Filter Bokeh filter for 62mm thread lenses (M62x0.75) 4 shapes: heart…
I wanted to put the filter of my teapot somewhere so it can drip and dry off between brews, so I made this. Fulfills its purpose perfectly. Should you have a filter with a different diameter, it's easy enough to adjust the model. Feel…
Introducing the Camera Lens Cap Holder 62mm, your camera's new best buddy! Crafted with love and a touch of tech magic from TinkerCAD, this sleek accessory is here to ensure your camera's lens cap never goes astray. No more fumbling or…
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Remix of "Ikea lack support leg support bracker" by Tiko, that I recreated from scratch in Fusion360 to be parametric (editable .f3d project included). My idea was to place the Prusa Original Enclosure on an Ikea Lack table, but it…
Hey guys, this is my 55mm lens cap holder for any standard camera strap (10x1,7mm). The advantage of this design is for me the tiny size. Without the cap you wont recognize that there is something on your strap. Ill add some more…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Bahtinov mask that fits over standard 62mm camera lens filters. https://en.wikipedia.org/wiki/Bahtinov_mask 65mm inner diameter. Use scaling in your slicer to make it fit other sizes, or edit the F3D file. Prints in under 30 minutes.
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Nikon 62mm & 46mm lens cap holder for a 12mm Nicon camera strap. Printed on a well-tuned printed so you may need to make small adjustments to make it fit perfectly. My print details Feature Detail Printer type FDM Material type PETG (PLA…
This custom-designed lens holder is a perfect addition to the Gridfinity modular storage system, offering a secure and efficient way to store your Sony E-mount lenses. Measuring 2U x 2U, this versatile mount accommodates all Sony E-mount…
Small Joe 62mm diameter - Anal Butt Plug Extreme wide 62mm socket 75mm high 67,5mm Best result by 0.1mm layer or lower Please sand smoothly with great care. Use at your own risk.
Adapterschalen für Filament rollen mit Ø62mm Innen
162mm+163mm version of "IKEA TJUSIG Hat Suspension System" made by Dmitry. Fusion file attached, for those who use it. I've used the inner-part of two IKEA RÄCKA , where I found the 163mm version to be the best. But, it's a TIGHT FIT, so…
Take your intake setup to the next level with this custom 3D printed adapter, designed to fit a VM22 carburetor with a 38mm (1.5") air filter inlet and adapt it seamlessly to a 2-7/16" (62mm) K&N-style air filter. Whether you're tuning a…
This is a screw-in threaded Batinov Mask for lenses with a 62mm diameter filter with 0.75mm thread pitch. Made to use with my old school Tamron 19AH but should work with any lens with a 62mm x 0.75mm thread. Get pinpoint stars with a…
This is a lens cap holder for the lenses that come with a Nikon Z50 II kit, the first is to fit a 46mm lens cap, the second is for a 62mm lens cap. There's a number of other designs out there that do the same thing and look similar but…
spice racks for use 400mm deep ikea cabinets, different sizes. Just cut in your slicer over the central parts add connectors, glue together with superglue
Lens hood that is a press fit onto the filter thread of a lens
A filament Swatch for the use with a 62mm Label (P-Touch). Dimensions: L: 72.0 mm H: 55.0 mm W: 3.0 mm Label Dimensions: 62.0 mm 32.9 mm 10 Stacks for Opacity Check: 0.2 mm 0.4 mm 0.6 mm 0.8 mm 1.0 mm 1.2 mm 1.4 mm 1.6 mm 1.8 mm 2.0 mm A…
It's unlikely that you have the same issue as me, but my previous nest's field of view was half brick, even with the angled spacer. So this is the 62mm spacer that I made to push the doorbell out beyond my ledge of brick so I can get the…
A lens cap holder I designed for my wife, holds 52mm, 58mm, and 62mm lens caps. Each size has the correct threading just like the lens itself, so they fit perfectly and rigidly so they're going nowhere. Designed to be slipped on to a…
To make it stack print in vase mode with 0.8mm wall.
A small chibi-style dragon designed for easy 3D printing. This miniature combines a cute design with strong shapes, making it suitable for both display and painting. 🖨 Printing: - Tested on FDM printer ( Bambulab X2D ) - Layer height:…
A simple bottle holder designed for the IKEA SKÅDIS pegboard system. This model holds 3 bottles or containers up to 62mm in diameter and mounts directly onto standard SKÅDIS boards using integrated hooks. Great for organizing: Paint/resin…
Matice pro botku pušky MAS FR.F2 7.62mm, ze zkušenosti s tou puškou vím jak jednoduchý je vymlet závit na originální matici, proto jsem vytvořil tuhle. Buttstock nut for MAS FR.F2 7.62mm rifle, from experience with the rifle i know how…
A replacement spring for SONY 62mm lens cover. Just snip off the remnants of the broken spring and place the new one in. No glue needed. Attached is gcode for Ender 3 print in PLA, takes about 9 minutes to print. Works plenty good. Drawn…
To connect a vacuum cleaner to a 62mm brick core drill Fits this diamond drill: https://www.ecotools.be/diamantboor-droog-62-x-280-mm-met-afzuigopeningen
Ring light you can find here: PLD Ring Light Filament used: PETG Brass inserts: M3x4x5 Adapter has 10 degres angle to avoid glare. Height: 0.2 Infill: 15% Require support (visible on image) Priont time: about 35 min Added: F3D - Fusion…
Reinforced Version for 3D Printing of this part: https://www.pool-bedarf.de/klemmring-spannring-filterkessel Joint: 8mm Screw/Pin Attachment: M8 Screw with Nut Print Settings Rafts: Doesn't Matter Supports: Yes Category: Replacement Parts
The ventilation pipe was directly mounted to the chimney with ducktape which started to decay and caused a leak. This adapter clamps on the chimney pipe and converts it into a smaller diameter which fits within the ventilation flexible…
Customized version of http://www.thingiverse.com/thing:9860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=9860 Instructions Using the following options: mount_base = 3 buckle_width = 42 lens_diameter =…
Customized version of http://www.thingiverse.com/thing:9860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=9860 Instructions Using the following options: buckle_thickness = 4 buckle_gap = 5 lens_diameter…
I have a P1P with the EasyARC enclosure, and I wanted a place to fit my twin set of Anycubic Air Purifiers to reduce the VOC levels while printing ABS/ASA, so I designed this raiser to allow fitting the air purifiers on top (for maximum…
Adaptor has a 62mm O/D and has a nice friction fit to the Makita hose vac top - https://www.printables.com/model/212623-lowrider-3-cnc-makita-700-series-mount-removable-d/files This is the 50mm hose im using - Purchased locally in…
