Counting matching models…
This is a silhouette model of the car. The default stl is approximately 40cm and 2mm thick. You can scale it as you like in your slicer, but don't scale it uniformly, otherwise the thickness will change (try to keep 2-3mm). Add…
This model is compatible with the lego system.
This is a basic cover that works as is but I kept it as simple as possible to make it easier for people to modify. Facing the printer the right side has the factory tab and a provision for a magnet. Since the left side mount points are…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Printed using eSUN PETG +HS, .2 layer height, four walls and three top and bottom layers for the base and two walls and two top and bottom layers for the dampers (BTW PETG without addatives is the bane of humanity). I screwed up the…
I had some issues installing SKF bearings and mainly dust seals on my forks on triumph street triple 675r. I had created and printed some variation of some fork driver I downloaded to 41mm. But, after successfully installing the bearing,…
PR44(675) to PX625 Battery Adapter Suitable for adapting PR44 (675) batteries into electronic devices that use the PX625, such as inside old film cameras.
Crank protector for shimano M8100 and SLX675
I am re-uploading this model from Thingiverse to preserve Stew675's amazing invention here and so that I can maintain all of the links and information. Originally posted on September 09, 2024. I will not be rewarded with any Prusameter…
Remix of stew675 's beacon bracket, added air duct for stock and Phaetus Conch hotends M3 nuts (fan mount ) and m3 inserts or m3 square nuts (beacon mount ) required to make it work Normal supports needed , all print settings and material…
My 2yo knocked over the floor lamp in his nursery, and broke the glass globe. I could not find anything on the internet to replace it, so I whipped one up in CAD with a little style, with flutes that look like cut glass or pleats. It is…
This model is compatible with the lego system.
Qidi Cover – Remix with Hex Pattern & Logo This version of the cover is compatible with Stew675’s project , which allows you to mount a Beacon / Cartographer 3D probe . This model is a remix of the original cover created by @Derek_2843290…
This is a Remix of the Original Keyring for the Blue Type 675 Batteries. They a quite big, but I got it to fit 6 pcs ... nice :) Made ist lighter and as a keychain. Used Chicargo screws with a 5mm nut-side and a distance of 5,5mm. there…
This model is compatible with the lego system.
This model is compatible with the lego system.
I remixed the cover linked in the stew675 beacon mount to use some leftover 6x3 magnets instead since i have alot of them laying around. I also made some holes that makes it more lightweight. For more details about the model read the…
This model is printed using Overture ABS on OrcaSlicer. I glued a 3mm zinc nut to create a bond with the magnet on the right side of the extruder mount. On the left, there is a mount that can be accessed through the fan hole that allows…
Ho disegnato questo coprifaro per eliminare il “becco” della versione originale. Dopo aver montato lo scarico 3in1 laterale al posto del doppio scarico sotto la sella ed aver montato il portatarga barracuda, si è liberato un sacco di…
Beacon Simmetric Holder Reworked for QIDI Plus4
This is a housing for the Max6675 modified from bradford's original to better fit my particular Max6675 breakout circuitry. It also removes the lettering on the side of the housing to relieve my printer from having to maul itself…
Please use STEW675 holder https://www.printables.com/model/1253290-modified-for-attach-the-head-front-cover-with-the
Attaches to a #10, 1.5mm metal guard. Includes both 6mm and 3mm variations of the friction fit guard. Print with brim! Supports are optional. I painted them on in Prusa Slicer on the left and right edge of the incline, printed with the…
Dieser einfach Adapter dient dazu, die Hörgeräte Batterie 675 in alten Kameras stabil und sicher einzusetzen. Getestet habe ich den Adapter in mehreren Olympus und Canon Kameras, die Ursprünglich für Quecksilberbatterien gedacht waren.…
I started this project trying to find a better way to measure the temperature of my Pizza oven than constantly having to open the front hatch and pointing an infrared laser at the stone. The following parts are used: Wemos D1 / ESP8266 /…
I made this battery tray for my Rollei 35 SE it should fit x4 SR44 or 675 batteries. I t fits perfectly without the batteries but as they are a little bit too thick, it's harder when they are in the tray. Maybe in the future I'll add a…
Really simple thingy. An insert that fits snuggly in the battery cap for the 35 RC. It allows for the use of a 675 sized hearing aid battery instead of the original Mercury PX625 battery. Category: Camera
This is my model of the John Deere 675 skid loader. There will be attachments coming soon.
I was excited to outfit my Qidi Plus 4 printers with Conch nozzles, but found rather quickly that they leave a space in-between the new hot end and the front carrier plate. I use Stew's front end carrier plates, as well as most of his…
I'm mainly using the Medisana HB 675 XXL heated blanket on my desk chair. Since the controller module is dangling from one of the corners of the heated blanket, it was a hassle to change the heating level. It also posed a risk of being…
Старые колеса вышли из строя, пришлось на скорую руку изготовить модель, надеюсь кому-то пригодиться
This is a large bucket for the John Deere 675 skid loader.
2D-Silhouette einer Triumph Daytona 675R: Einfach gehaltene Konturansicht eines sportlichen Motorrads mit typischen Linien und Proportionen. Geeignet für den 3D-Druck und vielseitige Anwendungen.
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
Sometimes it is the small things. This tiny little gear plays a very important role in making a Samsung M2675F Mono Laser Printer work. It is also bravely resistant to all attempts to glue or otherwise repair it when it breaks in half. In…
Devided to two parts ( M ale and F emale) for small printers like E3 S1. 4 wall lines, 20% infill, PLA, no support. Not perfectly precise, but simple and works.
This is an enclosur for a Arduino Leonardo + 2 MAX6675 Temperatur Boards. Print Settings Printer: Neptune 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Das Filament PLA Black Notes: Printed with Cura's Tree supports…
You can adjust the width of the hook in the OpenSCAD file. 30mm is pretty strong. I wouldn't recommend getting any lower. You can also put your own text on it. By default it just says “Daytona”.
Arrow exhaust plug for Street Triple 675 without silencer. Exhaust opening measures ~1.78". I printed at 101% for a good snug fit. Printed in TPU. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker TPU…
Toolhead cover for Qidi Plus4 when using Beacon3D mod by stew675. Had to save it as .3mf so the colors can be changed to match your filament for beacon logo. I used blue instead of green for the Beacon logo since I didn't have any green…
For using the Sw-Motech USB device I createt a Mounting Thingebob, that can sit on tScrews of the Fueltank. This is the Part I used PETG, for when something does go wrong, that there is some “give” Supports are also needed. The Gcode File…
On my AL-KO lawnmower I lost the nut to secure the handle, so I made a copy of the original one. The M8 nut is inserted inside.
After I have installed my studio monitors on the K&M26754 stands I did not like the way the cables were dangling in the back. So I designed this clamps to keep the cables neat and slick along the stem pipe. Don't print them in PLA as it…
Epson G6770/ 6750 Standard Lens Cover
Wall of back of TV remote holder for a LG AKB75675304.
Fits a hearing aid battery (Type 625 PR44) into the Olympus 35 RC screw-in battery cover. This is a small part with small details like bevels and lips. Print as detailed as possible - I printed with .10mm layer resolution The adapter…
Hitch for Bruder Sprinter 2672 Kemping - spare parts Bruder 42675
Here is a replacement part for the Olympus 35RC camera. These cameras originally used 625 mercury batteries, now unavailable (and illegal to produce). The 675 zinc-air hearing aid battery is a good replacement but requires care in…
Adapter for two 675 batteries as replacement for PX14 mercury battery. Use a short M2.5 or M3 flathead screw. Ideally 4-6 mm. Quite useful for old Super-8 cameras. Screw is -, top is +
Project Expired patents - "Reviving Forgotten Inventions" I search Google Patents for intriguing expired patents and bring them back to life—because I believe they’re either interesting, funny, or genuinely useful. Once I find a design…
Import from Thingiverse for Printables - https://www.thingiverse.com/thing:51675
Not designed for sliding. Chances are if you crash, your clip on will be junk anyway. Split design uses the bolt to hold this into the bar with just friction. I recommend you print with 100% infill for less chance of layer split. May fit…
I needed a stand to keep my stepper motor drivers off the metal base of my PnP machine - I'm upgrading my TVM802 to OpenPnP with custom electronics. Modeled in FreeCAD (original available). # Instructions No support required Print at 0.2…
This is a jig to fit Stew675's Qidi Plus 4 beacon mount for the annealing process if you want to go the extra mile of annealing your beacon mount for heat and durability.
The enlarged base improves the stability of the NX-5795-675 alarm clock from inFactory. All control elements remain accessible and the battery compartment is securely closed. To improve its slip resistance, I attached four rubber feet to…
Turn the knob to switch the LED.. Initial OpenSCAD file created by Claude, then modified and adjusted by testing. Assembly: Select STL depending on Battery and LED Voltage. bend cathode 90 degree insert LED with anode to Front bend…
Print flat I used Polymaker PLA, Prusa Core One, 0.2mm layer height with a 0.4mm nozzle with adaptive layer height Dimensions captured using a digital calipre
Rear French Military Light (reverse light and fog light) - Gabriel Lyon 67580 at 1:1 scale already simplified
Front French Military Light (position, blinker and blackout) - Gabriel Lyon 67500 at 1:1 scale already simplified
Beacon Simmetric Holder Reworked for QIDI Plus4
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
Print flat I used Polymaker PLA, Prusa Core One, 0.2mm layer height with a 0.4mm nozzle with adaptive layer height Dimensions captured using a digital calipre
