218 models
I finally decided to publish some of the lures I designed and rapid prototyped a few years back. This topwater stickbait / pencilbait has a length of 7cm / 3'' and weights approx. 7g / 1/4oz without hooks. I already caught many perch and…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Printed the top part without bottom or top layers to create holes for heat dissipation. Warning! Uses heat inserts to screw top in. Parts needed: 4x m3 screws 4x m3 heat inserts
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for PETGSource material: PET
EN: The bracket is suitable for mounting 20 cm wide shelves on drywalls. M5 dowels can be used as cavity dowels. The hole can be subsequently extended for larger M6 dowels. If you like my model(s) please leave me a like to support my…
Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant
I print it with support enforcers below the inclined section at the caps downside - but might as well work with bridging. I use PETG as base material for the lower section to ensure enough stiffness and Flex as material for the cup. To…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Ripper/Cutter is screwed into the kitchen cabinet alongside with any paper towel holder you have or print. Slide in any regular kitchen paper towel up to the width of 27cm/10.6in! Print: Upside down, with organic supports, low infill.…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this…
I didn't find a small death star lamp. So I decided to remix one. Fits nicely into the Ikea Fado 17cm lamp. https://www.ikea.com/de/de/p/fado-tischleuchte-weiss-40455437/ (german link) Have fun printing. It looks super nice! Printed it…
Here's a standard 7C trumpet mouthpiece! It works pretty well. It's obvious when playing that it's not the same as a metal one, but it gets the job done. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter…
👍 Don't forget to Like and Collect it, so you can easily find it later! ⭐ After a successful print, rinse with water for a smoother finish. The Mini Pocket Slide Box (25mm Tall) offers expanded storage while maintaining its compact and…
Thanks to Olafejs idea, I have made a remix of two rose stem projects: https://www.prusaprinters.org/prints/133445-spiral-vase-rose-stem and https://www.prusaprinters.org/prints/133069-spikey-rose-stemshaft to make a more realistic rose…
These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
This is a remix from a model from BR562 on SKFB. I figured there weren't any really good models of the UNSC's primary tactical dropship so I updated this one and added many surface details the original lacked. Always drink from the skulls…
7C sized trumpet mouthpiece, roughly modeled after a Bach 7C size mouthpiece.
Cover for your Holosun 407C-X2 or 507C-X2 with side mounted battery tray. Print in supplied orientation. Designed to be printed with NO support and minimal bridging.
Erste versuch ein Angelküder zubauen es sollen noch 4x Drillingshaken und 5x Ösen dran. Petri Heil!
I extended the 5cm box to make it 6cm, 7cm, 8cm, 9cm, and 10cm, respectively. I didn't change the other dimensions.
Grip is mounted with a standard ¼" screw. It has a hole for a stabilising pin. Optional Arca-Swiss plate component included (import as one object into Prusa slicer to have it integrated). Printing Prints easily laying flat. Just add some…
Please leave a ♥ Like if this print was helpful to you :-) A super simple version of a doorstop that features 1-12mm height and 7cm length, making it pretty compact. It will work with most doors. If you need a different size, simply scale…
Arm of 17 cm for https://www.printables.com/es/model/647794-flexible-sturdy-phone-arm-100-printed compatible with Prusa MINI.
Round Hat block stretched to 105% in X direction and 95% in Y direction Printed with 6 perimeter layers and 2% infill
I recently upgraded my camera from Sony A7M2 to Sony A7C. As much as I love small form factor cameras, the ergonomic of A7C is not ideal for my hands. I have seem people using thumb rest for Leica & Fuji cameras and I have always though…
i used ironing on topsides, had it on peo plate ( yes it should have been a carbon pattern to be really sweet ) 0.2mm, 1st layer speed only 250mm/s2 because of peo-plate 15% infil ( gyroid, i wanted to avoid warp as muck as possible )
It is 20,6cm in diameter so a bit larger then the original, but fits on the Fado base. Printed with treesupports in the middle.
ENG version : Gingerbread House Cookie Cutter as collection 16x17x14cm is not only for X-mas. All models are in 3mf for MK3S+, MINI+ and STL for other FDM. Collection : Front side, Back side, Roof, Side, Floor, Big&Small Window Material :…
Ryper3d never stop ;) Here you have new Ryper MMu2+1s 7 Colors. You can use the assemble guide from Prusa MMu2+1s (ignore selector assembly). You can get Einsy and MMU board firmware on our Github…
Picatinny adapter for Holosun HS407c, also works with the HS507c, Trijicon RMR, and ADE Stingray red dot sights. Requires 1x 3/16" diameter pin to press fit the mount on the picatinny rail Print Settings Printer Brand: Prusa Printer: I3…
While I designed several parts for my 9mm Airgun, I need to model some types of ammunition. Those are not for printing but if you need to make a design, you can use the STEP files for place into your design. The Models are created by…
Simple case for cheap 5x7cm universal PCB. Snap-fit No support needed Two variants of the case (height 8 or 10 mm) Cover for the 10 mm variant 0.2mm layer / 0.4mm nozzle / 20% infill if you like this, buy me a beer ;)…
Remix to include the #757CARES logo
This 3D-printable speaker adapter was designed to fit aftermarket speakers in a 2012 Vauxhall/Opel Vivaro (Vivaro A) camper conversion. I created it for a family member after being unable to source a suitable adapter in time for a planned…
This simple cover allows to protect your SZ-BT07CCCV module electronics from accidental mechanical damage. It snaps on without the use of screws, stays snug, but allows you to take it off easily to access the voltage/current screws on the…
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
just resized this model (https://www.printables.com/model/146464-a-stem-in-vase-mode) to fit the 7cm Spiral Rose Vase. length is 19.6 cm and the stem is 1.4 cm thick
Adapted from the excellent design of Jack Mason for Olympus OM10 SLR Eye Cup https://www.myminifactory.com/object/3d-print-olympus-om10-slr-eye-cup-60283 The hotshoe version also use the sony hotshoe design from Anatoly S.…
Cover for Holosun 507Comp-X2 - protect your red-dot! The cover snaps in place using the protrudings that fit indentations on red-dots frame.
Used to connect steel pipes for building furniture using 2.7cm diameter steel pipes. https://www.obi.de/regalboeden-moebelbauplatten/stahlrohr-100-cm-2-7-cm-schwarz-matt-zum-moebelbau/p/4029294#/
Replacement ladder for a Matchbox No 57C Fire Truck.
This topwater stickbait does not require any extra meltall eyelets, simply run a steel leader through the bait and attach a triple hook or simple hook at the end. In my tests I got it weighing up to 14 grams. The recesses are suitable for…
Turn your IKEA Fado Lamp into something truly special with this 3D-printed moon lithophane shade, designed to fit the 17cm version of the lamp - Ikea Fado Lamp - 17cm Why You’ll Love It: Magical Moonlight: When you switch on the lamp, the…
Modelo más corto y con corte, para evitar choques con el extrusor a partir de Z 180. Altura 8,5 y 7 cms – Reverse Bowden Short Connector, for Prusa MK3s frame`s and Ikea Platsa furniture. Large and short versión
I designed this simple stand for the Death Star Lamp - Ikea Fado 17cm from https://printables.com/model/487658-death-star-lamp-ikea-fado-17cm , because unfortunately in Argentina that IKEAI kit doesn't exist. I uploaded the 3mf files as…
This model is compatible with the lego system.
Zipper Slider 7mm Coil-Zipper - Reverse mounted. Glue the attachment to the zipper slider to hold the puller.
On my search to improving my A7C's ergonomic, I found Widget's camera grip for A7C ii/ R. I really appreciate the idea and printed one for fitting. Unfortunately, the grip size is different. Fortunately, the base plate is almost identical…
This model is compatible with the lego system.
Helical Gear replacement for Fellowes M-7Cm paper shredder. Printed in PETG with 0,2mm layer and 30% filling.
This is an alternative cover/case to the one that Makerbase offers on GitHub ( https://github.com/makerbase-mks/MKS-SERVO57C/tree/main/Shell%20file ). It can easily be printed without support on a FDM printer. Category: DIY
Designed in Blender. required bed space 300x300 nozzle: 0.4 supports: yes layer height: 0.1 infill: 5% The piece might be tight at first, it will ride smoothly after a couple times you use it. Alternative version included for ender 3,…
bouton volume autoradio peugeot 207cc
UPDATED 18 MAY 2025 After using this for a week away I decided to add a Lid to enable easier access to one days pills. A simple 7 compartment insert for the excellent 7cm x 5cm Container Pod by Squinn, now with Rotating Access Lid,…
811807577C Audi wheel housing liner insert
Used to connect steel pipes for building furniture using 2.7cm diameter steel pipes. https://www.obi.de/regalboeden-moebelbauplatten/stahlrohr-100-cm-2-7-cm-schwarz-matt-zum-moebelbau/p/4029294#/
This model is compatible with the lego system.
Make shure the material the final part is made of can withstand at least some heat ( i would guess it should be around 100-150°C. I used B07H5S9VP5 (ASIN, use search funktion on amazon) although the material could have been a bit stiffer…
i got bored from normal pellets, so i created 2 types of pellets, one with a drill head, another with a hard pointy head
I really enjoyed the A7C thumbrest from Xisha, but with my large hands I'd like the thumb rest to be a little further away from the grip. I accomplished this by just shortening the arm. Another benefit is that the tumbrest bends much less.
The base is designed Death Star Lamp - Ikea Fado 17cm lamp designed by Kiloler. Since the local Ikea doesn’t sell the Fado 17cm lamp, I have to design one that holds a standard 60mm LED puck (for example: https://a.co/d/0dACBa4s ), with a…
PCB mount for 5x7cm. Slight angle for ergonomics. Holes in bottom for cables or venting. 19 gram print including tree supports in print in example. (Sunlu PLA+) Screwholes present in case of hardmount needed. Category: 3D Printing
Based on protection allegée by @matt with inspiration drawn on by the Prusa RC2 mask. Designed to help Southeastern Virginia (USA) healthcare and first responders who are running low on masks and face shields. The design uses Write-On…
Fits into a tin/box/tray/bag/dish to keep cupcakes safe. Use 2 tied together for a half sheet size or 4 for full sheet.
The ones you can buy for this camera just look ugly so I made my own :) I already added supports on the model itself, they're the red bits seen in the 2nd picture. Just break those bits away. You may need to clean the hotshoe section a…
auf den Kopf drucken ohne unterstützung. print upside down without support. Petg 0,2 Layerh
Box with lid 10,5 cm x 7cm x 5cm For the hinge axis use a piece of fibre
I built a custom circuit using an ATTiny to drive an oil temperature gauge off the factory DME in my Porsche. I needed a vented enclosure for a 5x7CM prototype board and couldn't find any I liked with a snap on cover, so I made my own.…
Prensa para mini-haburguesas 7cm de diámetro. Mini-burger Press diameter 7cm.
This is a little different from most other dart cutters I've seen. This comes in two parts, the holder and the cutter. The holder holds the dart (tip down) and the cutter holds a standard utility knife razor blade, then slots around the…
A simple remix. Height increased to 8cm and 2 transom added for greater strength and a better final appearance.
This is my exhaust hose adapter for the Core One. (There are many like it, but this one is mine). It is fairly short, 3.7cm and it for hooking up a 4in exhaust hose. There is an internal round at the mouth of the adapter and a 1mm flair…
0.2mm layer 0.4mm nozzle 3 walls 40% infill (overkill) PLA matte covered in thin layer of clear varnish for waterproofing
A diy version of the Ubiquity floating mount 17cm for compact gateways. Required 60x10x3mm bar magnets x5 M3 or M4 countersunk screw x4 In the slicer add a pause at the 3.6mm layer height or layer 18 if using 0.2mm layers. The layer right…
Kerzenhalter für drei 7cm Kerzen, zwei versionen mit glattem und rundem Rand easy to print, ohne supports.
easy and fast to print nice to have little helper
Change History: Dentists' offices needed the transparency much further away from the face to make room for lighted loupes. I added an extension that snaps onto the headband which moves the transparency 57mm further out, while still…
Designed to hold your Samsung Soundbar remote, my remote is from my Samsung HW-Q700A, but it may work for others. The remote model is AH59-02767C for your reference. The remote fits very snug when printed at 100% scale, I'd suggest to try…
Thanks to Widget for the great model. I wanted to add an airtag to my camera stealthily so I've added a space in the model to make it happen. The sound emit from the airtag would be muffled, so I added some cutouts to increase the sound…
pcb mount 5x7cm NO SCREWS 9 Gram print (2 walls 0.2 height 20% infill) No screws required, the pins can be melt and pushed down for permanent fixture. No Supports Easy print Made for readily available 50 x 70mm ( 5x7cm ) solder bread…
Tagliapasta per ciambelle di diametro 7cm.
Standardbilderformat meines Fotolieferanten. Ich habe in FreeCAD es neu designend und dabei gleichzeitig das Passepartout so angepasst, dass alle Abstände identisch sind. Der Zusammenbau ist einfach. Passepartout von hinten in den…
Desk mount for a RSHTECH ST07C USB Hub. https://www.amazon.de/dp/B0CJTCKQRC You can mount it with screws or double-sided tape. I designed it so that the HUB sits tightly in the holder and does not come out when a USB stick is pulled out.…
I got tired of my Pyrex food storage lids ending up all over the cupboard, so I designed these caddies to keep the lids in a neat stack. There is 1 for round 2 cup bowl lids, and 1 for round 4 cup bowl lids and up to 3 lids for round 7…
Needed a cap that looked more like the original one - print in PETG - paint after print needed
A simple replacement gear for Hama Home S7CD Shredder , nothing super fancy, but seems like it does its job well enough. I don't know if this gear has any name or tag, so please refer to the attached photo to see which gear this is. It's…
MSI MAG27CQ Adapter for AmazonBasics Vesa Mount This Remix from reparator ,thank you Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: No Supports: Yes Resolution: 0.3 Infill: +60% Category: Computer
This 7 segment display uses WS2812b ledstrips with 8 leds per segment. This will not only make the display larger and brighter but also allows for gradient colors within the segments. I know there are other similar projects that use…
This model is compatible with the lego system.
This is a remix of the low profile version of https://www.thingiverse.com/thing:2153437 by @bobtidey. I created a cap for the power button, extended the lid 1mm to center it better over the I/O pins and added a little hole over the reset…
Simple rigid case for chinese boost converter "1200/1500/1800W" You can find it on aliexpress ( https://www.aliexpress.com/i/4001183786370.html ) or amazon ( https://www.amazon.de/gp/product/B0BB7TBVD2 ,…
This model is compatible with the lego system.
This is a small addon for the eBox Lite to cover up the filament guide hole, which caused a great deal of lost heat and increased humidity for me. Fits with all filament types, however I recommend Polypropylene because it allows for an…
Pull-start handle for 2-stroke 47cc/49cc engine. Use M3 nuts and bolts to assemble it. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.3mm Infill: 50% Filament: gembird PLA+ black Notes: For…
We liked the original double coat hook design but had a larger cubicle wall. I used this as an opportunity to learn how to modify a model. Needs to be scaled down slightly in Cura because I failed to export the right size from tinkercad.…
Adapter for the Comfee MPPHA-07CRN7 (or similar) mobile AC unit onto a 140mm standard hose. Best printed out of a temperature resistant filament (i used Nylon-CF; PC, PCBlend or ASA/ABS should also work). Includes an optional Anti-Warp…
